Add Frame Hold lost timecode source information

I've got a huge problem with the Add Frame Hold dunction in Premiere Pro CC 2014.2 release (Also Mac or Windows)
Here is my workflow
All the footages are shot with an Arri Alexa and converted in Quicktime ProRes LT 1080p25 with timecode conservation from source (verified)
I'm editing a 4 mins music video in stop motion style. The video footage are freezed on precise pictures in Premiere with the Add frame hold function
For example : Add frame hold at 10:03:27:16 on the media source
When I play this frame hold in the timeline, with Timecode Overlay turned ON, the timecode is running...
So if I trim the IN point or OUT point of this clip to adjust the duration of the freeze frame, I lost the original timecode reference of my freeze frame !!
(In this example, I've adjusted the IN and OUT point of my freezed clip to shorten the clip). The video displayed is OK (the same image that has been frozen) but the timecode overlay is not (10:03:31:19)
The BIG problem is that this full project is going to be conformed for color grading (Assimilate Scratch) so is IMPOSSIBLE for me to relink my editing with the original ALEXA footage.
It seems to be a huge bug !
Anyone from Adobe tech has got a solution or a workaround to let met find the original timecode from each frozen shot ?
I've tried to open the project XML (unzip the prproj file the open it in a xml editor). I've found bunch of <frameholdstart> sections but the numbers does not correspond to regular timecodes or numbers of frame or whatever. Is there any way to convert theses numbers into regular timecodes ?
Please Adobe techs help me. My project is stuck into Premiere for the moment and I cannot send it to the color grading crew.
Thank you
noar

<rate>
<timebase>30</timebase>
<ntsc>TRUE</ntsc>
</rate>
<duration>58139</duration>
<metadata>
<storage>QuickTime</storage>
<key>com.apple.finalcutstudio.media.uuid</key>
<size>36</size>
<type>UTF8</type>
<value>05A309F4-2331-46A6-B885-FA9456EA692E</value>
</metadata>
<timecode>
<rate>
<timebase>30</timebase>
<ntsc>TRUE</ntsc>
</rate>
<string>01:00:32;09</string>
<frame>108861</frame>
<displayformat>DF</displayformat>
<source>source</source>
<reel>
<name>137</name>
</reel>
This is a copy from part of an FCP XML. I don't know if the tab indention is required for the reel name to pass

Similar Messages

  • Add frame hold and export frame

    hi
    i'm working on HD broadcast cartoon animation.
    'add frame hold' and 'export frame' are not creating a 2 field, proper frame hold for me - yes i can tweak the field options using 'always deinterlace' or 'flicker removal' but this isnt a fix or a true result of a 'frame freeze'.
    is this a bug or am i  missing something?
    thanks
    Joe

    Is your timeline interlaced?

  • Add Frame Hold not working in CC v8.1, Caravan

    Premier Pro creates the freeze frame and it's visible in the timeline, but doesn't appear in the program or when rendered.
    This also applies to Frame Hold actions created (successfully) in previous versions but now don't play.
    Is there and on/off button I don't know about?
    Thanks
    JAMES

    Hey KMueller - neat thinking.
    Before reporting - I did try the drag / drop, then the import, then the media browser options and they all ended up the same.
    Using your idea, I just straight forward made a copy / paste of the file in the folder it sits in, then dragged that over and hey presto - it came in with audio...
    The icon representing the original file says video only still - but the icon representing the "copy" of the same file has a video & audio icon - and it plays ball on the timeline.
    Thanks
    Dave

  • Multicam Frame Hold Issue in Premiere CC 8.0.1 - When Flattening

    Hi,
    I'm not sure if this has been addressed before, I couldn't find an answer:
    When I use frame hold for a segment in a multicam timeline, then flatten the timeline, the frame hold no longer holds the frame.
    The timeline is a 720x960 23.976p  P2 timeline with three cameras.
    Thanks!

    Me too with this one have it randomly when just opening the same project and begining to edit
    had it happen about 4 times now.
    Latest update
    Microsoft Visual C++ Runtime Library
    Program C:\Program Fi...
    R6025
    - pure virtual function call
    [ok]
    Adobe Premiere Pro CC 2014.1 has stopped working
    roblem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe Premiere Pro.exe
      Application Version: 8.1.0.81
      Application Timestamp: 5426694c
      Fault Module Name: MSVCR110.dll
      Fault Module Version: 11.0.51106.1
      Fault Module Timestamp: 5098826e
      Exception Code: 40000015
      Exception Offset: 00000000000740da
      OS Version: 6.1.7601.2.1.0.256.1
      Locale ID: 2057
      Additional Information 1: a22a
      Additional Information 2: a22a26525c716a6a7fdf0a84944bf385
      Additional Information 3: 9245
      Additional Information 4: 9245cf38809b383bd6a86e3f052c9114
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

  • Frame Hold Corrupts Image

    Hi,
    Whenever I use "Frame Hold" on a clip in CS3, the frame image gets corrupted. Turn frame hold off, and the image goes back to normal. Really weird. This used to work fine for me in PP 1.5. Makes "Frame Hold" essentially useless. Tried in different projects and on different computers and consistently get the same thing.
    Anybody else have this problem? Is this a known bug?
    Cheers,
    Veronica

    > even though the project is progressive and all the footage is progressive
    But this is really only the tip of the iceberg.
    The project settings apparently do not matter. The problem is that Premiere makes some very silly assumptions (with no way to override them) about which sources are interlaced and which are progressive.
    Along with frame holds, there are also issues with (certain?) effects and choosing TFF/BFF/progressive in the export dialog options. Here are some examples:
    In a 720x480 interlaced project, applying effects to a video clip and then choosing a progressive output format will deinterlace your footage -- whether "deinterlace footage" is checked or not, and regardless of whether your footage was progressive to begin with.
    In a 720x480 progressive project, applying effects to a video clip will cause instant deinterlacing: with no regard to output settings or whether the clip is progressive.
    More things I've posted about this here ...
    #1 ...
    #2 ...
    # 3 ...and on the
    Matrox forums.

  • I am using the pattern stamp tool. when i select my pattern it adds a hatching to teh source pattern and copies that hatching to the destination image

    I am using the pattern stamp tool. when i select my pattern it adds a hatching to the source pattern and copies that hatching to the destination image

    Please post screenshots to illustrate what you are talking about.

  • When I recently updated FireFox, the DownloadHelper add-on was lost, and will now not download, though I have tried about 5 times??

    When I recently updated to the newer version of FireFox, (version 3.6.13) the DownloadHelper add-on was lost, and it will now not re-install, though I have tried about 5 times?? When I clicked the icon to download the add-on the download progress bar indicated that the download was underway however, when it had completed, the add-on appeared not to have downloaded - including no icon - not even if I search for one. When I tried to download the same add-on again, the download window indicated the download in a faded color and it seemed to be indicating that I already had the add-on. Try as I might, I can't get it to work. DownloadHelper always worked with no trouble on the previous version of FireFox. Are you able to help? Many thanks for this service!

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (Firefox 4: click the Tools button at the left side of the Search Bar) to do a compatibility check.
    You can also try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
    * http://kb.mozillazine.org/Resetting_preferences
    * http://kb.mozillazine.org/Preferences_not_saved
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • HT203905 I have changed my family sharing organizer payment method but when asked to add members it keeps asking for information for a card I no longer have so I do not have the security code.

    I have changed my family sharing organizer payment method but when asked to add members it keeps asking for information for a card I no longer have so I do not have the security code.  My current shows in all the correct places but when asked to verify, the old card is referenced.  I changed the card in itunes and on my phone and ipad.

    I have changed my family sharing organizer payment method but when asked to add members it keeps asking for information for a card I no longer have so I do not have the security code.  My current shows in all the correct places but when asked to verify, the old card is referenced.  I changed the card in itunes and on my phone and ipad.

  • Error when add a custom field to source 2LIS_12_VCHDR

    Hi Experts,
    I'm trying add a custom field to source 2LIS_12_VCHDR. The fields are in LIKP table's append. That are
    zz fields. I can see the fields in MCLIKP structure, but I can't see these fields in LBWE transacction when I try update the structure MCLIKP. I don't know if this last is important because when I replicate of the source the fields, they are visible in BW.
    The problem is when I try activate the transfer structure. I Can add the fields from the data source to the transfer structure but If try activate the source the error is:
    "Error when creating transfer structure /BIC/CCBA2LIS_12_VCHDR in source system XXXX"
    I'm forgetting some step?
    somebody know other way for do it?
    thanks for your help.
    Manuel.

    Hi
    May be the datasource is not active, do the following obviously in development
    goto LBWE and click on your datasource; system will ask you for a transport request number give it a name. now save the datasource.
    replicate and activate your t/r
    hope this helps
    Regards

  • Just purchased two new iphone4S.  Went to back up two old iphone3Gs,  one of them went into recovery mode and i lost all my information on it.  I don't want to makie the same mistake on other phone.  Please help

    I just purchased to new iphone4s.  I went home plugged old iphone 3Gs to back up to save my info to transfer to new iphone 4s.  One of the 3Gs after it spent about 30 minutes in back up mode suddenly said it was unable to back up then i received a plug in to itunes message on it and the message I am receiving is to restore it to factory settings.  So i basically lost all my information.  I do not want to repeat this fiasco on my husbands phone which contains his business contacts etc.  Please help!

    valerie136 wrote:
    I just purchased to new iphone4s.  I went home plugged old iphone 3Gs to back up to save my info to transfer to new iphone 4s.  One of the 3Gs after it spent about 30 minutes in back up mode suddenly said it was unable to back up then i received a plug in to itunes message on it and the message I am receiving is to restore it to factory settings.  So i basically lost all my information.  I do not want to repeat this fiasco on my husbands phone which contains his business contacts etc.  Please help!
    Are you syncing anything (contact, calendars) with iCloud?

  • Missing SOurcing information in PReq

    HI,
    I ran an MRP (MD02) for the material, it did create a PReq.
    I had maintained Contract for the material / vendor with valid price. Also Source list was defined for this material and was fixed. MRP Parameter was set to 1.
    The issue is the PReq created due to the MRP--> dows not show in sourcing information.
    What am I missing?

    I could resolve this issue. The Purchasing view in Material Master --> Source List flag should be off.
    Thanks for the help and support.

  • Frame Hold feature doesn't work in PE8

    In one of my video clips, I want to freeze a frame in the middle, and then have that frame frozen until the end of the clip. The Frame Hold feature is supposed to accomplish this. However, I can't get it to work in Windows 7. Here are the steps I've taken, which is right out of the PDF manual for PE8:
    (1)     I open up a clip in the Preview Monitor.
    (2)     I position the CTI where the frame is to be held, then I mark it with Marker 0 (zero).
    (3)     I exit the Preview Monitor.
    (4)     I select the video clip, go to Clip, Video Options, Frame Hold. I check "Hold on," and specify Marker 0 (zero).
    But when I play the clip back, all of it is completely frozen -- before the zero marker and after the zero marker. I've uninstalled and reinstalled the program, but this didn't help. I have 4 gigs of memory, and a 500+ gig hard drive. My video drivers are current and up-to-date. Does anyone have any clues as to why I'm not able to get the Frame Hold feature to work?

    This is an old thread, but I have a related question.
    First, what exactly is "Frame Hold" in PrE12?  If I search the PDF Manual (AKA "Tutorial"), there are zero occurrences.
    I gather from the above that it's supposed to allow the user to designate one or more frames at one or more points in the clip that will stop the action for a designated period of time.
    I have been accomplishing the same effect with the Freeze Frame function, which inserts a BMP image in the clip.  (It also allows the bmp to be saved to a folder on the computer.)  I don't like this because the insertion chops up the audio and sound tracks, creating gaps that are hard to fix later.  (See one of my other posts for more details on this.)
    So the Frame Hold option intrigues me with the hope that it would be less disruptive to the work flow.
    The other point of interest comes from Bill Hunt's comment above:
    "In PrE, there is a little "camera" icon, that produces a still image from the Video. Select the Frame (last Frame in this example), and output a still image. Cannot recall the exact choices in PrE 8, but I think that they are BMP, or TIFF."
    The Freeze Frame in PrE12 only allows BMP; I would love to have a TIFF option, and I'm hoping that Frame Hold might allow it.  (I thought could export a still image as TIFF, but I find that JPEG is the only option, and in any case that is time-wasting if you have a lot of frames to capture.)
    Yet another question: PrE has no little camera icon that I can find.  One has to go to Tools > Freeze Frame (or use a shortcut key, which I do).  Then the choice is either Export as BMP or Insert in video.  (If you want to do both, choose Export first, since Insert will close the dialog box and you will have to start over to do the Export.)  Has the camera icon (which had the obvious advantage of being simple, quick and intuitive) been replaced?
    Bottom line: does Frame Hold (supposedly) accomplish the same as Insert Freeze Frame, without the disruption of other tracks?  If so (or even if not), how?  I have futzed around with it for quite some time and have no idea of how it is supposed to function.  I have tried setting inpoint, outpoint, marker zero, etc. and no matter what I do, the video keeps on rolling right through that point when I get there.
    It's frustrating to have a feature that is not searchable in the "Manual" and doesn't lend itself to trial and error discovery.
    Message was edited by: Kawika808 - factual correction

  • I have change my hd in my macbook pro and i know i´m going to lost all my information i have in iphone, what to do?

    i have change my hd in my macbook pro. I have no security copies and i know i´m going to lost all my information i have in iphone if i upgrade to 5, what to do? its possible to send first all the information i have in the iphone to the computer than upgrade him?

    Hey barnsieno10,
    Thanks for using Apple Support Communities.
    Looks like sign in issue, This article is a great resource for the message you are receiving.
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/ts3970
    Have a nice day,
    Mario

  • Frame Hold Problem (with pictures!)

    Hi,
    I'm working with Premiere Pro cc 2014 on a Mac Pro 2011 with a Radeon 5770 card and GPU acceleration.
    I've been trying to do pan-and-scan and dissolves between scenes but it's been really flaky.  In many scenes it just doesn't work./
    Here's the top of a frame hold clip in this sequence. Play head is at the top of the scene with key frames but no effects added.
    Now I've moved the play head to a later point in the scene with a drastically different set of key frame parameters and no change in the image (it should be very zoomed in):
    Even after rendering it's a fail.
    Sometimes if does work, but when  there's a transition, the video loses its effects settings as soon as the transition begins.
    I'm either doing something stupid or I've got a bug.  Suggestions?

    If this is for the photo albums that were transferred from your computer, under the Photos tab for your iPhone sync preferences with iTunes, deselect Sync Photos followed by syncing which will remove all photos on your iPhone that were transferred from your computer. Follow this by reselecting Sync Photos and selecting the photos you want transferred to your iPhone followed by a sync.
    If no change after this, the next step is deleting what is called the iPod Photo Cache from your computer followed by another sync.

  • URGENT: How do i get Source information?

    Hi All,
    My Planning application getting source information from EBS to FDM then Planning.
    EBS-----------(Using ERPIntegration)------------FDM---------------Hyperion Planning.
    We have various branches to load data from EBS.
    then where do i get which source of EBS(like GL,SD,etc...) to which planning branch
    ex: SD-------------------Planning Vehicle branch
    Project is on production, then where do i get FDM?
    Do i need to ask my admin to get path and access on FDM? or not? then where do i get designed FDM?
    Please, please
    i am in emergency
    thank you
    Bawani

    Hi Dwlph,
    Thank you very much for your answers. I have some more questions, please answer it
    Q1) Can we load EBS Data/MetaData through FDM into planning system with out using Outline Load Utility?
    Q2) Using FDM do we load Data directly into planning?
    Q3) Can FDM load metadata directly into planning?
    Q4) If FDM loads Data / Metadata into planning where can i find mappings?
    Q5) Can not pass Data/ Metadata into planning with out using ODI, in case source is EBS?
    Q6) What is the path for ODI in the DEV server? ex. http://servername:portno/ODI/index.jsp like ......(just expectation)
    Q7) I found two FDM applications in Shared Services under FDM folder,
    but opening FDM like http://servername:portno/FDM/... it is showing only HFM related FDM, its not showing Planning related FDM, why?
    Q8) If they used FDM application for Planning how should i open? and what is the path to open?
    So many questions Dwlph,
    Sorry for this
    But thanks for your help
    Bawani

Maybe you are looking for