Add hp laserjet 8100 n to macpro, system 10.6.8

I'm having trouble adding an hp laserjet 8100 n printer to my Mac Pro computer, System 10.6.8, Quad-Core Intel Xeon, 2.4 GHz, 2 processor, 64 GB 1066 MHz DDR3 memory with Cisco modem (model No. DPC3010), LINKSYS Cable/DSL router with 4-port switch (Model No. BEFSR41).
Computer won't connect to the printer during the Add Printer step within Print & Fax within System Preferences. The Add Printer window reads "Determining Installable Options...", "Status: Connecting to printer...", along with the animated blue and white candy cane bar. Computer does not connect to printer.
Any suggestions?

Some HP Printers are shown in the "default" window, but cannot be connected and work this way. Check the owners manual.
Despite the fact that is shows up as a Bonjour printer under Default, I have to connect my similar hp printer by using the IP pane, then specifying hp jectdirect as the connection method. Then everything goes smoothly and it works. You may need to know its IP Address.

Similar Messages

HP laserjet 8100 not working - I tried everything! HELP!!!!

HELP!!!
I updated to OS 10.6.3 and my HP laserjet 8100 does not even show up anymore.
I tried
1. add new printer
2. click IP tab, choose HP Jetdirect - socket
3. entered printer's IP address
4. Print suing: automatically went to generic post script printer, so I looked for the laserjet 8100 driver instead and click ADD
5."Connecting to printer" goes on forever....
6. I clicked configuration and then continue and it added the printer on the list (Hooray!, not really)
when I print I choose the one I just set-up and then the queue keeps telling me unable to connect, and it goes on and on.
PLEASE HELP!!!!! I've been at this for hours now to no avail. Seems like the others after doing these steps are getting a result, whats wrong with mine?

have you looked at this thread?
I can't offer specific pacifist advice - since I don't use it - but there's another easy way there.

Problem with HP laserjet 8100 (error 79.00 FE)

Hallo,
my company have two printers LaserJet 8100. They worked perfect on Windows XP. When i install Windows 7 both of them stoped working. And start show error 79.00 FE. I tried cold reset. They printed ~50 pages and stoped. We have Hp laserjet 8150DN and wtih this model everything ok.
Please help

Hello Rick,
Just as I mentioned above I'm using Microsoft Forefront Protection, but had no luck with disabling the Real-time protection - it is disabled,
but that chanage nothing.
The downloaded driver is for Windows 7 64 bit.
I did write to HP but I still got no answer from them... I already checked that support page, but I didn't get any information corresponding
to my problem, not to mention that a lot of that page is just copy/paste from another product and it's not relevant to that model.

Java Add-In installation on a existing ABAP System (MSCS Cluster)

Hi all
we try to install a Java Add-In for a already existing ABAP System with
SAPinst. The ABAP System is a NetWeaver2004s SR1 System in a MSCS Cluster.
We have the Problem that we can´t choose the Installation Drive during
the SAPInst Define Parameter Step during the "Central Services Instance (SCS) Java Add-In" Installation.
But in the Installation Manual for
NW2004s Java AS in Chapter 4.3.2 is stated:
"Caution: You must install it on the same shared disk as the ASCS instance."
If I run the Installation, the SCS will be installed on the local disk E:
beside the Central Instance. But it need to be on the shared Disk P:
beside the ASCS installation. How can I control this?
Stefan

obviously the network share saploc is existing in your system an pointing to a local device.
Delete the local saploc share, install SCS instance, run MSCS first node, additional node, create the local share saploc again (don't forget to set permissions on the share, the default permission did only allow Read vor Everyone) and proceed with installation.
There is a note in creation for this issue.
peter

Can't print to HP Laserjet 8100

I can't print a PDF file using Acrobat Professional 8.1.2 to an HP Laserjet 8100. The printer dialog shows the job and lights blink on the printer, but nothing is printed. I can print the same PDF file on the HP 8100 using Apple Preview. I can print the same file using Acrobat 8.1.2 on the HP Color Laserjet 5550 sitting next to the HP 8100. I just can't print to the HP Laserjet 8100 using Acrobat 8.1.2. I can also print to the HP 8100 using Acrobat 8.1.2 if I check the box "Print as image", but it is very slow in that mode. Does anyone know the answer to this one?
I have re-installed the HP printer drivers from HP. I have deleted and reinstalled the printers. All Apple and Adobe updates are current. I am using a Mac Pro with Mac OS 10.5.4.

I ran into the same issue today, the resolution was to change the TrueType Font Download Option to "Native TrueType" (it was set to automatic by default). This resolved the issue for me (using an HP Universal Print Driver v4.7).
Printing Preferences -> Advanced Settings -> PostScript Options -> TrueType Font Download Option -> Native TrueType

Add one field in LM51 ( while LM51) system should ask Material Scan

HI gurus ,
I am carring out WM inventory through RF device for that,
1.     I want to add one field in LM51 ( while LM51) system should ask Material Scan.
2.     In LM51 system ask SUT twice this time,
      if i enter the SUT ones & save the entry then system pick direct system quantity .
i want one check over here.
CAN any body guide me ,
Answer of any problem is helpful for me.
dev

Have you searched in SCN / Google how to add a new field in field catelogue? Since you have recently joined SCN, you may not be aware of SCN rules which you better go through to your right screen where it has been very clearly indicated that posting any basic or repeated query is not allowed.
G. Lakshmipathi

How to add more disk space into /   root file system

Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/hda1             965M 767M 149M 84% /
/dev/hda7             1.9G 234M 1.6G 13% /var
/dev/hda6             2.9G   69M 2.7G   3% /tmp
/dev/hda3             7.6G 4.2G 3.0G 59% /usr
/dev/hda2              18G   12G 4.8G 71% /u01
LABLE=/               2.0G     0 2.0G   0% /dev/shm
/dev/hdb2             8.9G 149M 8.3G   2% /vm
[root@rac2 shm]#

Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

How to add tape drive in hyper V operating system

how to add tape drive in hyper V operating system
tape drive may be to scsci or USB port.
how to add pls suggest

how to add tape drive in hyper V operating system
tape drive may be to scsci or USB port.
how to add pls suggest
You need something like StarWind Tape Redirector that "iSCSI-izes" hardware attached to host. So you'll be able to connect with iSCSI initiator from inside a VM running on this host, some other host or even other physical machine (as long as it
has iSCSI connectivity), see:
StarWind Tape Redirector
http://www.starwindsoftware.com/download-starwind-tape-redirector
So at the end of the day you'll have something like on the picture below:
Good news: this software offering is 100% free so you don't need to pay anything to anybody :)
Hope this helped!
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

HR CEE add-ons for different countries in one system

Hello,
is it possible to have HR CEE add-ons for different countries in one system?
Will SAP system work properly? What kind of risks of these imports?
Thank you very much.

A couple of generic answers on add-ons
- of course you can have several add-ons working on the same B1. To understand
the details on how add-ons are started and maintained by B1 desktop pls refer
to the e-learning available here on SDN
- compatibility of add-ons. There is no generic answer to this, it depends on the
functionality and implementation of the two add-ons. Anyway, if two add-ons are
functionally independent and they follow the solution guidelines, then they should
be interoperable. You can find the solution certification guidelines here on SDN
under the ICC section: these rules cover points like namespaces, event handling,
user table and form creation and so on that enforce interoperability.

Add a MacBook Pro into a new system with serial no

I want to add a MacBook Pro into a new system with serial no at https://jointventure.apple.com/services/home but it says "indirect purchase for Mac". Anyone helps?

Before getting Mavericks, be sure to read:
https://discussions.apple.com/docs/DOC-6271

Boundary Group for site assignment, shall I add My "Management Point" as a "Site System Server" in "References"

Hi,
We have an flat singel site.
Boundary Group for site assignment, shall I add My "Management Point" as a "Site System Server" in "References"
/SaiTech

Yes - if it's also a DP?
The servers are added as content location servers for this boundary group. Only servers that have a distribution point or state migration point installed on them are available.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

I purchased a MacPro 2010 and is having trouble to add HP LaserJet 1022n to my printer list.

Dear Administrator,
I purchased a Mac Pro 2010. I migrated from my MacBook Pro to Mac Pro. Then, the HP LaserJet 1022n won't print. I reseted printing system and now can't add that printer to my printer list. Software Update have installed HP Printer Driver v. 2.16.1 on my system. The printer is actually available in HP Printer Driver 1.1.1 update. But, no matter how I do it, it always complained that the Driver software is currently unavailable and ask me to install it later. I have downloaded the HP Printer Driver 1.1.1 update manually, but it won't install and showed my Macintosh HD as not a valid install target. I tried to install the driver CD that came with the printer, but it complained that a newer version of the driver has been installed on the SSD hard drive. Please help.
My guess is that the HP Printer Driver 1.1.1 update is on the system but is corrupt, that is why the Add Printer command can't simply pick up the driver on the computer. Other method also break down since they think I already have the driver installed. I think that I needed to uninstall the HP Printer Driver 1.1.1 update to correct the system. That is just my hunch.
Please advice. Thank you very much for your time and effort in this matter.
Sincerely yours,
Zigang
Ph.D.
<Personal Information Edited by Host>

Have you tried un-installing the original (complete) software and re-installing it?
Usually that does the trick. After that you can try the update if necessary.

Mac won't add HP LaserJet 1022

Hello,
I have HP LaserJet 1022 printer and it used to work fine on my Mac OS X 10.5.8 until I accidentally (stupidly I should say) deleted it from my printers list (clicked "minus" button in Print&Fax). Since then, I just can't add this printer to my Mac and I tried many things. I have my drivers installed. When I click + in Print&Fax, the Default window is empty and there is no HP printer on the list. What do I do? Hope you can help.
The printer is USB connected.

Hey , Thanks for getting back to me regarding this issue. At this time I am going to have you check the driver that is being utilised by your HP Laserjet on your Mac OS X 10.10 computer. There is a chance that a generic Apple Airprint driver was loaded onto your printer and is preventing you from printing. Can I please have you follow the steps below to confirm that the correct driver is being utilised.
1. Click the Apple menu, and then click System Preferences. 2. Click Print & Scan, and then check if the name of your printer displays in the Printers list. 3. Click the name of your printer, click the minus sign (), and then delete the printer.  4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer, 5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Laserjet driver is selected and not the Airprint.
  6. Click Add to add the printer to the list.  Once your HP Laserjet has been confirmed as installed with the correct HP driver, please test printing again. Please let me know if these steps resolve your printing issue. Good luck!

Unable to add HP Laserjet 4250 printer to my network

I've obtained an HP LaserJet 4250 printer to add to my home network. Plugged in the network cable, came up as an option on my "add printer" list. Clicked, was recognized, added to menu. When I try to print, item hangs in the print que and nothing happens. Printing out settings page from the printer, it appears the printer has an IP address not on my network! How to change the address. BTW, how do I find a list of IP addresses assigned by by Airport Extreme? It no longer seems to be an option in Airport Utility (v6.2)!
Using Mountain Lion (OS 10.8.3), iMac, Airport Extreme/Time Machine connected to Netgear ProSafe Gigabit switch.

Download the latest Driver and install it could solve the problem.
http://support.apple.com/kb/DL907

How to add attribute to characteristic already in production system

HI Guru's ,
How to add a attribute to characteristic which already exist in production system.
thanks in advance

Hi Venkat,
We don't make any design changes in production box. Usually you make changes in Development box then transport that object with request to Quality box. You test the changed object there, if no inconsistancies found you will transport the object to Production box with same request.
In development box, if you want to add the new attribute to the characterstic, you need to delete the complete data in the characterstic.
Thanks
Sreekanth

Add hp laserjet 8100 n to macpro, system 10.6.8

Similar Messages

Maybe you are looking for