Add "Identification Numbers" Tab to Emplyee Directory / Employees Screen

Hello,
On the Account screen, there's a tab called "Identification Numbers."  We have a requirement to add this exact same tab to the Emplyee Directory / Employees screen.
We seem to be having issues adding this tab.  We have successfully added the tab in a Z view, however, when we click on the tab, nothing happens.  In the browser, we see the message "Processing your request," however, the tab details do not render, unfortunately.
By chance, could someone possibly give detailed steps on how to add this tab correctly to the Emplyee Directory / Employees screen?  I think we're close, except for the fact that the tab details do not render.
Also, we're on CRM 5.0 with NetWeaver 7.0.
Thanks!

I've found it. trx. BUS3 contains the specific screen.
regards.

Similar Messages

  • Add button to BP subscreen Identification Numbers

    Hi gurus,
    in transaction BP there is a tab called Identification. On this tab a subscreen area Identification Numbers exists which contains a screen (SAPLBUD0 - 1520). We want some added logic on the screen by means of a new button. I think it is not possible to add a button because the screen is hard-coded, so what I thought should happen is that a copy of the screen is made including the new button.
    And now my problem occurs, how do I replace the former screen(SAPLBUD0 - 1520) with the new screen on that particular screen area?
    kind regards,
    Wim van Erp

    I've found it. trx. BUS3 contains the specific screen.
    regards.

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • Adobe Acrobat XI add line numbering on left hand side

    In Adobe Acrobat XI were is the option to add line numbering on the left hand side of the page for documents?

    If it is a Word document that you used to create the PDF, Then Word has the ability to show line numbers.
    Two methods:
    Layout Tab on Ribbon click in Line Numbers.
    From Main Menu choose format Menu > Document > Layout. Click Linember button and set up as desired.
    Then create your PDF.
    Note this is shown using a Mac. But the same thing is in The PC version as well.

  • BAPI to read and create Identifications numbers in CRM bp screen

    Hello.
    I'm on the hunt for a bapi to update the table 'Identification Numbers' you can view in the bp screen under the 'Identification' tab.
    I'm in the process of writing code that updates everything to do with a contact person bp and am stumped on this.
    I've done a search on 'BAPI_BUPA*' in se37 and looked through them all with no luck.
    Anyone know much about this?
    Thanks

    HI Kieran,
    Did you try using the following report : AI_SDK_USER_BP_GEN
    Also you could refer the following SAP Help link regarding the same
    http://help.sap.com/saphelp_smehp1/helpdata/en/85/390f6e3c534892b18f5ec4212d0571/content.htm
    And LINK2:
    http://help.sap.com/saphelp_crm40/helpdata/en/8b/0c7d4dc8dcd847abf1dd5b314e2703/content.htm
    Best Regards,
    Manthan.

  • Add slide numbers to the Adobe skin progress bar

    Hi all.
    How do I add slide numbers to my tutorials?
    Thanks a million.
    Tim.

    Hi Tim,
    Insert the following text into a text caption.
    $$cpInfoCurrentSlide$$
    Go to Caption Properties, Options tab and change 'Display for' to "rest of project"
    Regards,
    Ravi Kishore

  • Add page numbers to a document in Pages

    How do I add page numbers to a document in Pages on the iPhone?

    When I tap the spanner I don't see Document set up.
    I see this:

  • How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

    How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

    Click at bottom of the first page:
    Menu > Insert > Section break
    Click somewhere in the 2nd page (not the header/footer)
    Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
    Click into the header or footer of the second page:
    Menu > Insert > Auto Page Numbers…
    If there is anything in the header or footer on the first page that you don't want just select it and delete it.
    If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
    Peter

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • ? how to add page numbers in pages 5.2, starting with 2.  Pages '09 had an option to not show folio on page one.  Also any how to do left and right folios for a Tabloid?  Many trhanks

    ? how to add page numbers in pages 5.2, starting with page 2.  Pages '09 had an option to not show folio on page one.  Also any idea how to do left and right folios for a Tabloid?  Many thanks  . . .

    Hello jacquemac,
    Your first question:
    There might be a better way of achieving what you wish to do, but following these steps could help you out.
    You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
    1. go for Documents (right end of the Toolbar) -> Section
    2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
    (what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
    3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
    4. click on your second page (the first page of your second section) and  "Insert page number" -> start at 1
    Your second question:
    Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
    greetings jl

  • How to add page numbers to a PDF in Adobe but maintain the ability to convert to a PDF/A

    I have an PDF in adobe that I am able to convert into an adobe PDF/A document. However, when I use the header/footer option to add page numbers to the document it is no longer able to convert to a PDF/A document. How can I add page numbers and still be able to convert the document to a PDF/A?

    The report says:
    Fixups
    Convert to PDF/A-1a (1 object)
    Make document XMP Metadata compliant with PDF/A-1 (77 objects)
    Flatten transparency (high resolution) (1 object)
    Discard hidden layer content and flatten visible layers (1 object)
    Remove document structure compression (1 object)
    Remove document structure compression (1 object)
    Recompress LZW as ZIP (1 object)
    Convert color to sRGB (486124 objects)
    Results (Summary)
    Error
    Layers used
    Marked entry in MarkInfo not set to true
    TrueType font has differences to standard encodings but is not a symbolic font (313 matches on 313 pages)
    When you look at the specific comments on the pages the page numbers are highlighted and they specific comment is: (on per each page number. the page numbers start on page 27)
    TrueType font has differences to standard encodings but is not a symbolic font
    Page 27: Arial 12.0 pt TrueType embedded RGB (ICC) (0.0/0.0/0.0)  overprint: off
    Some PDF-based ISO standards require that a TrueType font must not define any differences from standard encodings (e.g. MacRoman or WinAnsii) if it is not a symbolic font.

  • How to add page numbers in Numbers?

    How to add page numbers in Numbers?
    Is there a simple way like in Excel? Thanks.

    In Numbers '09, use Insert > Page Number
    Place the page number in a page header, and it will appear on each age when in Print View and when the file is prnted.
    May have changed in Numbers 3 (current version).
    Regards,
    Barry

  • I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. Mac users can no longer read the page numbers but pc users can.

    I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. As of about 2 weeks ago the mac users can no longer read the page numbers they get a font error message and see only -- where the page information should be. The pc users do not have this same problem. When I replace our regular font (URW Grotesk) with a system font (Verdana) everyone is able to read the page numbers. This is a new issues, I have been creating these documents in the same way for years without a problem. I have been on hold and on and off calls for the last two hours, I keep getting hung up on once I find someone in adobe support to talk to!

    Hi KnoopL,
    Are the Mac users using Preview to view the pdfs or Adobe Reader?
    Regards,
    Rave

  • Add a new tab in iTunes main window.

    Hi there.
    I want to add a new 'Tab' in the iTunes menu bar, to show video projects done for clients.
    I'd like to categorize it as Work, different from Movies and Home Videos.
    Is this possible? If so, how?
    Thanks!

    Hello,
    Adding a customized category is not possible unfortunately.

  • Add a new tab to General data in XD01

    Hi,
    I want to add a new tab to General data in XD01. I came across some BADI's(CUSTOMER_ADD_DATA, CUSTOMER_ADD_DATA_CS) which can be used to add pushbuttons(like General Data, Sales Area) and inside that we were able to add tabs. But i need to add a new tab inside General Data Button.
    Is there any Screen Exit to do this?
    Thanks,
    Savitha

    Hi,
    Try using BDTs. (Business Data Toolset)
    Check the area menu BUPT.
    Regards,
    Sharin

Maybe you are looking for

  • Crm 2011 on Outlook add-on problem

    2 I'm putting the user in CRM add-on. Was giving error when I run the Configuration Wizard . I did at one configuration . Came CRM plug-ins in Outlook. But it says the connection was interrupted . Other moving user I am writing an http address in the

  • Problems starting a completely fresh total backup on Time Machine - Help!

    I recently had an iMac which refused to boot. I reinstalled from a combination of Time Machine restore and the original system disc. It still took 7 hours to get all the preferences and odd programmes which didn't seem to restore back to working orde

  • Itunes libary location issue

    I have changed my computer 3 times this year and have multiple libraries. I pointed itunes to the most current libary (edit/preferences/advances/location) however no songs appear in itunes window. I can go to my file directory and click on a song. It

  • Export Camera Raw (NEF)

    Can't seem to find the answer with a search of the forum but what I want to do is take all the pix that were downloaded NEF/RAW out in the field (and slightly tweaked) and move them as NEF/RAW to the desktop computer. All I seem to find in LR in the

  • Subcontracting ISSUE(any standared is available)

    HI All Im doing subcontracting process.Im facing 2 problems here im not finding any SAP std to restrict this 2..plz give help how to do.. 1)Im doing MB1B(541 MOV TYPE) With respect to PO number.vendor automatically fetches from PO,but system allows t