Add ifnotype field to an Infotype Screen Control for Infotype 0006

How do I add an infotype field to an Infotype Screen Control for Infotype 0006. We need to add an additional Field for mobile phones. I have lloked in screen control (V_T588M) with no joy.
Edited by: Henry Manana on Sep 1, 2010 12:11 PM
Edited by: Henry Manana on Sep 1, 2010 12:12 PM

You may copy your current screen into a new screen (e.g. 2099) for MP000600 and add the 2 fields into the element list as well as the screen layout of screen 2099. Then set an appropriate Modification Group 3 to these 2 fields in T588M detail screen for screen 2099. Configure feature P0006 and table T588M to set screen 2099 for molga 16.

Similar Messages

  • All fields are not displaying in the infotype screen control

    Hello Everybody,
    All the fields from infotype 2001 and 2002 are not getting displayed in the screen control for these infotypes and
    when I checked the screens for these infotypes, the mod. groups/functions has not been set for field 'Group3' for those
    infotype fields.
    Is there a way I could set this field ' Group3' for these infotype fields also ? Can it be done thru screen exit and if yes could
    anyone tell me what's the screen exit for these infotypes ?
    Thanks
    Alok

    solved it myself.

  • Infotype Screen Control (T588M) not working for additional fields to contro

    Hi,
    I have a requirement to enhance IT 0002 with fields LNAMR, FNAMR and CNAME. Also field preferred language.
    I have included LNAMR, FNAMR & CNAME as additional fields in the Include Screen 2040 elements, lay editor and maintained table T582c where i have assigned enhancement to the standard screen. These fields are getting displayed in infotype 0002
    But the issue is Infotype Screen Control (T588M) is not working for these fields to control the display or hide.
    Has any of you come across this issue? what could be the reason for this issue? Please suggest ASAP.
    Thanks in advance.
    Regards

    Hi Experts,
    Please help with your inputs and suggestions.
    Regards

  • How to add new fields in message creation screen

    Hi All,
        My requirement is to add another 2 fields in the message creation screen.
        Also I found this link is bit useful.
    Add custom fields to Support Message
    Can anyone share the detailed procedure to add a field in the message screen.
    Thanks in Advance.
    Regards
    Narasingam. B

    Hello,
    I think of something like:
    First, you create extension, with transaction WE30.
    Then, reduce your idoc, your extension should also be proposed.
    Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
    regards.
    F.S.

  • REPORT PAINTER - Add a field to a selection screen - custom report

    Hi,
    I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
    Thanks a lot,
    Julien

    Hi Julien Girard ,
        Could you please check the below link :
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
    Regards,
    S.Manu.

  • Adds selection field at the first screen of FBL3N (G/L line item display)

    I would like to adds line item selection field at the default first screen of FBL3N.
    The field I'd like to add at the default selection screen is :Amount.
    This field can be selected at dynamic selection. But I'd like to use the field at the first screen of FBL3N, not in daynamic selection screen.
    If anyone knows how to add the fields into FBL3N first screen, please advice me how to do it.
    Edited by: Itchy31 on Jul 23, 2009 8:30 AM

    Hi,
    You can not add the new fields in the selection criteria thats the reason dynamic options are given for the further selection.
    If you still want to add in the selection screen then go for a customisation and coordinate with the ABAPer which is not suggestable as it is readily avilable in dynamic selection.

  • REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT

    Hi,
    I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
    Thanks a lot,
    Julien

    Hi Julien Girard ,
        Could you please check the below link :
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
    Regards,
    S.Manu.

  • Infotype Screen control - change field from display to change

    Hello,
    I have a field in a custom infotype, which is showing up as only display. I want to change it so that values can be input. I checked the screen layout in se51 and found that the field is checked as input possible field. There is no entry for this infotype in T588M. I am not sure, where else should I look so that i can change to field to take the input. Please suggest.
    Thank you very much !
    Rush

    Hello Everyone,
    I checked in Module pool Program. The program is written to check the field for some personnel areas. Now, when i did debug, I found that PSYST-werks is not read correctly. Suppose if there are 3 records in infotype 0001, its getting the first record value, not the recent record value. Any suggestions how to change the code, so that the PSYST get the recent record value?
    Sikindar, T588M do not have entry for this table. thank you.
    Jayanthi thank you for your help too.
    Rush
    Edited by: rushi K on May 13, 2008 4:15 PM

  • Infotype screen control

    Hi,
    Can anyone help me with the difference between the STD and RF screen control option for the fields of an infotype in the table T588M?
    I understand that both STD and RF option makes a field mandatory. Also, 'STD' means standard Setting and 'RF' means required field at the outset.
    But please let me know the exact difference between them.
    Warm Rgds,
    Arun.M

    Hi Arun;
    Actually they are not same. There is difference.
    STD is standard and RF is required field.
    Normally STD is coming with the system standard. I mean if that field is important for every company etc, I mean that field is required for every entry then STD means same thing with RF. But in some conditions some fields are not mandatory in the system standard. So when it is STD in T588M you can leave this fields empty.
    But RF makes the field reuired field anyway and you need to enter a value to save the infotype.
    Hope I could explain it clearly.
    Regards.
    Okan

  • Add Custom fields in Report Incident Screen in EHSM

    Hello experts,
    I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
    I have added two fields.
    Business Object: EHHSS_INCIDENT
    Node: BASIC_INFO_ALL
    Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
    Now how can i link with my screen and how to fetch notification data (standard F4 help)?
    and when i save data, where it will save?
    Can you guide me with proper steps for it as i am new in it.
    Thanks in advance.

    Hi Jayvin,
    To add the above fields on the screen, open the component configuration of the required screen.
    Enhance the same and add the fields from the respective Node.
    You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
    Regards,
    Sanket.

  • How to add new fields to Profit center screen (KE51)

    Dear All,
    I have a requirement that to add new fields to the Create Profit center screen KE51.
    I couldn't find the user exits for the same.
    Please help me in this.
    Thanks.
    Ravi

    Hello Ravi,
    I must respcetfully disagree(with other posts) that it is not possible to extend CEPC.  In our system we have added an append with two new fields to CEPC.  Now, that was the easy part. You must also find a way to maintain those fields when creating and changing profit centres.  To do this it was necessary for us to add a button to the create/modify screens.  It was also necessary to find a few enhancement spots in order to make this work(and it still is not perfect).   I am being very vague here because even though it is posible I would not recommend implementing this solution.  It was very time consuming and could be risky if you miss something.  There is a reason why you can find so little information in SDN and other places about how to do this.  Other, including myself have tried but it was painful.
    I know that this does not help very much.
    Regards
    Greg Kern

  • Selection screen control for a field in the report painter report

    Hi,
    Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
    Your prompt reply will be really appreciated.
    Thanks,
    Ramesh.

    look at this code and try
    select-options : S_NODEID for ZNODETAB-ZNODEID.
    at selection-screen on value-request for s_nodeid-low
    perform f4_nodeid using 'S_NODEID-LOW'.
    at selection-screen on value-request for s_nodeid-low
    perform f4_nodeid using 'S_NODEID-HIGH'.
    end-of-selection.
    FORM f4_nodeid  USING    p_field.
      declare it_node.
    select znodeid from ZNODETAB into table it_node.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'ZNODEID'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          dynprofield     = p_field
          value           = space
          value_org       = 'S'
          display         = 'F'
        TABLES
          value_tab       = it_node
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
    endform

  • Need to add more field in the selection screen in tcode crm_dno_monitor

    Hi,
    In the transaction code crm_dno_monitor, i need to add extra fields in selection screen. Do we have any way to add fields in the standard tcode crm_dno_monitor.
    Thanks
    Prasad

    If you need to add 5 fields on ticket screen then use EEWB enhancement.
    The ticket screen transaction is crmd_order which even opens up after you double click the ticket no from crm_dno_monitor report list.
    for crm_dno_monitor you can have the BADI CRM_DNO_MONITOR which will add later the column for the fields which you can add using EEWB
    Check the following blog which guide you for custom field creation using EEWB
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii

  • How to add a field to the selection screen and when the user enters ...

    hi all,
    can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT.  Thanks.

    Hi Kripa,
       If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
    SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
    PARAMETERS: n_in_en  RADIOBUTTON GROUP g1,
                q_ev  RADIOBUTTON GROUP g1.
    SELECTION-SCREEN END OF BLOCK mysel.
    SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
    PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
    SELECTION-SCREEN END OF BLOCK mysel1.
    SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
    PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
               c_no(10) TYPE c DEFAULT '9D0161',
               u_id(15) TYPE c,
               password(15) TYPE c,
               r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
    PARAMETERS:t_run TYPE c  AS CHECKBOX.
    SELECTION-SCREEN END OF BLOCK mysel2.
    SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
    SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
    PARAMETERS: p_ser  RADIOBUTTON GROUP g2,
    a_ser  RADIOBUTTON GROUP g2.
    SELECTION-SCREEN END OF BLOCK mysel4.
    SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
    PARAMETERS:p_path TYPE string.
    SELECTION-SCREEN END OF BLOCK mysel5.
    SELECTION-SCREEN END OF BLOCK mysel3.
    u will get this additional screen after the screen of ldb.
    I hope this will help u..
    Thanks & Regards
    Ashu Singh.

  • CRM - Add New Field in Competitor Product Screen

    We are looking for the right way to enhance the competitor product screen (object prod_cp) in CRM 7.0. We have explored several options and we would like to have a confirmation that we selected the right option for the CRM level we are on now. We checked enhancement options via eewb and aet. However, in transaction axtreg there are 129 objects that can be enhanced but object prod_cp is not part of that list so I assume both tools mentioned cannot be used to enhance the competitor product screen (we want to add new fields and put business logic behind it). Is this a correct conclusion? I based the conclusion on post below:
    AET enhancement capabilities
    Found a OSS note 1088910  which looks like something we could use instead in CRM 7.0:
    appl enhancement          component view for customer
    Competitor products (PRDCP)     PRDCPOV/CustomHeader
    Is this correct?
    If this is not correct, how can we enhance the competitor product screen without changing the sap standard code (like append a Z structure to table comm_product_idx and then....are there any enhancement sports for this screen where we can add our custom code?). Do we have to use the framework enhancement concept?
    Also found OSS note 1448299 that provides information about business functions for the Application Enhancement Tool (AET) in SAP Enhancement Package 1 for SAP CRM 7.0 and I saw that we will be able to enhance the competitor product screen as soon as we have upgraded to Ehp 1 just by switching on business function crm_inf_1. Is that correct?
    Rgds,
    Josephine

    Hi Josephine,
    You can enhance any standard CRM 7.0 component. follow this wiki on how to enhance standar CRM7.0 components
    http://wiki.sdn.sap.com/wiki/display/CRM/HowtoGuide-EnhancingtheUIinCRM+7.0
    You have two options to add new field to the competitor product screen
    1. Using AET. Application Enhancement Tool, require very limited technical knowledge and i believe even function person can add a new field on the webui screen using AET. Search sdn with AET and you will find lot of information.
    2. Create a z table with the new field value and product id (unique key).
        Create a value node in the standar component.
        On load of the webui screen fetch the details of the new field from the ztable and display it
        On the save of the webui screen if the value of the new field has changed update the z table.
    Regards

Maybe you are looking for