Add in cards compatability

I just purchased a HP Envy h8-1414. The OS is Windows 8 64bit. I need to add a second sound cardx to this system. Plus I also need to add an RS-232 serial card. I currently have a Sound Blaster Audigy or a Sound Blaster Live cards. I need the second sound card for communications software that I plan to install on the computer. The primary sound card will handle normal use connected to microphone and speakers. The second sound card will connect to an external interface.
So will I be able to add an RS-232 serial card and a second sound card to this computer?

Problem solved in about 20 seconds:
1.For non-bootable RAID Array disable both Raid controllers in the Bios.
2.Leave SATA enabled on all 4 HD's obviously
3.NVRaid and SATA drivers have already loaded at F6 stage of initial XP install
4.Go into Disk Management and configure and assign Raid array from there.
So now the 2 Seagate 300 NCQ drives are configured in a Raid 0 array while the 2 WD Raptors are handling system and key applications respectively.
4000 San Diego
K8N Platinum SLI
2xWD 80G Raptors
2x 300G Seagate NCQ's
XFX 6800GT
600W Enermax
Plextor 716
Plextor130
1G Corsair XMS

Similar Messages

Hp pavilion 1170uk graphics card compatability

I have a HP Pavilion 1170uk and have tried upgrading graphics card to a Gigabyte Nvidia Geforce GTX770 4GB.
When I start the computer it stops at hp boot screen and says press esc to enter startup menu and beeps about every 10-15 seconds.
I have put in a new 700w psu to run the card and when I put the original graphics card that came with the computer it starts up fine with this psu.
This sounds like a bios problem and I have the latest bios from the hp website installed on machine.
Is there a new bios coming out or can I get one from anywhere to run this graphics card or do I have to upgrade the motherboard aswell ?

LeonaL, welcome to the forum.
There are two things to consider when upgrading to a dedicated video card: 1) the wattage required tto run it properly as you mentioned and 2) the length of the card.
You could easily get by with a 600W to 650W Corsair PSU. Corsair makes enthu siast quality PSU's for reasonable prices.
To assure that the card will fit, you can make a template the size of the card and try in the space provided. Add one inch for any additional power connectors on the card. It should fit with room for good airflow.
The reason for a video card not working in a computer is they require UEFI Firmware in the motherboard, instead of a standard BIOS.
EVGA video cards before the GT 650 don't require UEFI. You can call each manufacturer's Tech Support to asure that it will work in your computer.
Please click the "Thumbs up +" button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I have an itunes account without credit card.How can I add a credit card to my account? Also, is there a way to buy apps without credit cards but via app store? Also, I want to download it directly to my iPad, can I do it even if i add credit card via pc

I have an itunes account without credit card. How can I add a credit card to my account? Also, is there a way to buy apps without credit cards but via app store? Also, I want to download it directly to my iPad, can I do it even if i add credit card via pc?

Changing Account Information
http://support.apple.com/kb/HT1918
Apps Store FAQ
http://support.apple.com/kb/HT4461
iTunes Store FAQs
http://support.apple.com/kb/ht1689
http://www.apple.com/support/ipad/applications/

Family sharing trying create new id for my kids but keep asking me to add credit card when i already have one?

HOw i make id for my kids after being ask to add credit card and ones on file

If you have an existing ID, & you don't want to use a credit card, you'll have to redeem an iTunes gift card. If you don't want to do that, you'll have to create a new ID by following the directions here, EXACTLY:
http://support.apple.com/kb/ht2534

How do you add a card to passbook

how do you add a card to passbook

www.passsource.com has some loyalty cards already setup
and more are constantly being added. You may wish to visit
that site a few times until you have the ones you use.
Go to the site from Safari on your iPhone, pick the card you
want, fill in the details and save to Passbook.

How to add * wild card to a specific field on the selection-screen.

Hello,
How to add a * WIld card to a field in selection screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_STCTS FOR G_STCTS OBLIGATORY, "NUMBER SCHEME
S_AT20A FOR G_ATTR20A, "SUBSTANCE ID
SELECTION-SCREEN END OF BLOCK B1.
I need to add Wild card functionality to Number scheme field S_STCTS on selection-screen.
Any suggestions would be apprecaited..
Regards,
Kittu

Hi Kittu,
Here is one sample code:-
select-option : s_name like kna1-name1.
start-of-selection.
if s_name-low = '*'.
select * from kna1 into table it_kna1.
elseif s_name-low = 'pat*' or s_name-low = 'pat'.
select * from kna1 into table it_kna1 where name1 like 'Pat%'.
endif.
In case of wild card Select should be :-
select * from <dbtab> where <field> like 'P%'.
You can also use RANGES in your Code.
E.g. RANGES: R_OBJNR FOR JEST-OBJNR
R_OBJNR-SIGN = 'I'.
R_OBJNR-OPTION = 'CP'.
R_OBJNR-LOW = 'K1*'.
R_OBJNR-HIGH = 'K2*'.
Hope this helps.
Thanks & Regards
Jitendra Gujarathi

Can we add graphic card to macbook pro late 2011

can we add graphic card to macbook pro late 2011

I'm sorry, but you can only replace the hard drive and the RAM. The rest of the hardware is soldered onto the logic board, so it's not possible to replace it

I lost 3$ for add visa card, plz help me, it does't work, when i buy gem in heroes charge, it' cannot conect itunes store and ...

Hi, i'm speak english so bad, 13/11 15:20pm, i add visa card ACB prepaid from VietNam, it' done. But when i buy gem from Heores charge( Ucool ), cannot conect itunes store, plz help
<Email Edited by Host>

Hi ..
Pre paid accounts are not accepted at the iTunes Store > iTunes Store: Accepted forms of payment
Iin-App purchases require either a debit or credit card. You may be able to purchase other content but not in app purchases.
What can I buy from the iTunes Store in my country? - Apple Support
Check to see what content you can purchase in your location > What can I buy from the iTunes Store in my country? - Apple Support

HT1918 It's not letting me add a card to my account

It won't let me add a card on to me account

What happens when you try to add it ? If it's a debit card then I don't think that they are still accepted as a valid payment method in all countries - from this page :
You may be able to use other payment types in your country, like debit and Maestro cards.
which implies that they are not accepted in all countries, and there have been a number of posts about them being declined.
For a card to have a chance of being accepted it need to be registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country when you are and your iTunes account are.

HT5035 What do i do if i only have 58 Cents left in my balance? itunes is asking me to spend the full amount of my balance before i can make a change or add a card?

What do i do if i only have 58 Cents left in my balance? itunes is asking me to spend the full amount of my balance before i can make a change or add a card?

You can add a card, or you can ask iTS to zero-out that balance. but you'll lose it.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Re: Can I add Express Card on Portege R700-18E?

Hello,
Is there anyway to add express card slot to R700-18E? It does not have express card slot on it. It is possible to add express card slot with docking station? Or any other option?
I want Express card slot for graphic card upgare.

In my opinion you should use such adapter . I think it is easiest solution for you.
What do you think?

HT1918 how to add debit card to iTunes account or create account without credit card

how to add debit card to iTunes account or create account without credit card?

Debit cards are no longer accepted in the iTunes Store, it seems. The current valid payment methods are listed here:
http://support.apple.com/kb/HT5552
Using a debit card in any online service where it stores your card is a bad idea in any case since if someone gains access to your account in the service, they can quickly drain your bank account. Credit cards limit your liability, as do prepaid iTunes cards.
Regards.

IDE add-on card for P67A-G45 (B3)

HI,
Anyone using an IDE add-on card with this board? I bought a Startech that appeaars to be incompatible with the motherboard. Don't need anything extravagent, just one that works, single or dual IDE ports.
Windows 7 Professional (64 bit)
Intel Core I7 2600k 3.4GHZ
G-Skill 8 GB Ram
WD1002FAEX 1TB HD
MSI GTX 260 Video
Rosewill 1000 Lightning PSU

Quote from: osuchuck on 07-November-11, 22:10:55
HI,
Anyone using an IDE add-on card with this board? I bought a Startech that appeaars to be incompatible with the motherboard. Don't need anything extravagent, just one that works, single or dual IDE ports.
Try this: http://www.amazon.com/Bidirectional-IDE-to-SATA-Converter/dp/B000RK89M4

P1-102A2M - Disable Bootable Add-in Cards

Greetings,
Is there a way to disable "Bootable Add-in Cards" under "Hard Disk Boot Priority" for the P1-102A2M. We are currently unable to boot from the local mirrored raid when the SATA card is installed but when removed everything works as expected. This seems to be a common issue with Silicon Image chipsets but seeing as the motherboard has an option to modify the hard disk boot priority it really should have an option to disable it. If there is an option to disable "Bootable Add-in Cards" within the bios then I apologise for my oversight but the only option that I have found is "Boot Other Device" which I have disabled but to no avail.
The below information is from the server.
W9249MS V1.0 030204
03/02/2004-Canterwood-6A79BM4FC-00
MS924945S0109026
Unfortunately the SATA card does not offer an option to disable it from booting.
Thanks in advance for your assistance regarding this matter.

Svet,
Thanks for the file. I have flashed the board and can see the options. I have set the settings up as you have explained but unfortunately the internal raid is not being seen if the external raid card device is powered. I have selected both "378 RAID, Slot" and "Slot, 378 RAID" but the onboard raid is not being identified as a bootable option.
Is there any way that the PCI-X slot can be disabled completely from the boot process?
Thanks for you help regarding this matter.

How do I add loyalty cards?l

HHow do I add loyalty cards to passbook?

Hi Grumpy.grandad,
Welcome to the Apple Support Communities!
I can understand wanting the add your loyalty cards into Passbook for the ease of use and organization. Please use the information in the attached article to help see if the loyalty cards you use are supported in Passbook.
Use Passbook in iOS - Apple Support
Passbook-enabled apps
With Passbook-enabled apps, you get a prompt or an offer to add a pass to Passbook when you enter a gift or reward card, check in for a flight, or buy a ticket through an iOS app. To view a list of featured Passbook-enabled apps on your device, select the Welcome pass in Passbook and tap Apps for Passbook. You can also click or tap Apps for Passbook to view the list in the iTunes Store.
Cheers,
Joe

Add in cards compatabil​ity

Similar Messages

Maybe you are looking for

Add in cards compatability