Add-in does not load on Excel 2013 Professional Plus

I have Excel 2013 Professional Plus 32-bit running on Windows 7 (64 bit). I ran the Power Query 32 bit installer fine, but Excel now gives this error when starting up:
System.IO.FileNotFoundException: Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.File name: 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
I pressed Continue and then checked File > Options > Add-ins > COM Add-Ins and "Microsoft Power Query for Excel" is listed and checked on there, but Power Query's interface does not appear in the Ribbon.
Restarting the computer, restarting Excel, and toggling the COM Add-In have not helped.
This is happening on three computers that we have tested it on. All computers are new within the past few months and so there should not be any incompatibilities.
This was installed using the installer at
http://office.microsoft.com/en-us/excel/download-microsoft-power-query-for-excel-FX104018616.aspx

Resolved! As Curt suggests, I installed .NET 4.0 Full and then Power Query started working.
The Power Query 64 bit installer warns that .NET Full is required instead of .NET Client (the 32 bit installer did not):
.NET 4.0 Full is at
http://www.microsoft.com/en-us/download/details.aspx?id=17851
Some information on the difference between .NET Client Profile and the full .NET Framework is in the details of the .NET Client Profile download page:
"The Microsoft .NET Framework 4 Client Profile provides a subset of features from the .NET Framework 4. The Client Profile is designed to run client applications and to enable the fastest possible deployment for Windows Presentation Foundation (WPF)
and Windows Forms technology. Application developers who require features that are not included in the Client Profile should target the full
.NET Framework 4 instead of the Client Profile."
Curt- add in the link to the .NET 4.0 Full installer and I'll mark your post as the answer.

Similar Messages

TDMS Excel Add-in Does not support new Excel 2007 Row Limit

First off I would like to say the TDM/TMDS format is really useful. It allows you to do all kinds of things that would be a real pain if you tried to do it with tab delimited spreadsheets. You can format data into excel sheets for analysis with seperate tabs and channel names over the columns and the whole nine yards. You can even throw error messages into the properties that show up on the first tab.
The problem occurs when the user is working with really large files. Excel 2003 and all previous versions of Excel have limits of 65,536 rows by 256 columns. Until the latest version of the TDM Excel Add-in if you tried to import files larger than this it would throw an error and wouldn't create any file at all. Now it imports a file and you specify the index, which is so much better.
Excel 2007 supports 1,048,576 rows by 16,384 columns! This is really useful. But the current version of the TDM Excel Add-In does not support the new row limit. Is there any way we can get a version of this for 2007 that supports the new row limits? It would be cool if the Add-in could auto-detect the version and change the import limits accordingly but that may be too much to ask. Has anyone else run into these problems?
My client would like to record hour long files at 200Hz all day long. Thats 720,000 rows of data per file. Yes, thats a lot but excel can handle it. The TDMS importer cannot. Of course there are work arounds and we will have to use one if a new version of the TDM Excel Add-in is not made soon. Is there a new version coming? Please say yes.
[will work for kudos]
Solved!
Go to Solution.

I redownloaded the file. I couldnt figure out how to completely uninstall the verison of the TDM importer already installed, so I just tried to install the one i downloaded. The installer said "no software will be installed or removed" and I had to click cancel because there was no next option.
I tried to import the data again with the importer and got the same 'selective import' dialog box again, limiting me to the 65,535 rows.
Here is what I am getting.
How do I uninstall the add-in so that I may reinstall it?
I uploaded a copy of one of my tdms files to the ftp.ni.com/incoming directory for you to download and attempt to import.
File: "442732.zip" size: 82.2 mb
A little more information about the tdms file
The data is 14 columns of single precision float and is about 720k rows. There are four sections (sheets in the same excel document) with the data converted differently in each tab/section. The data is the same amount in each section as well. There are also a couple sections listing the constants and scalars used to convert the data, as well as the typical first page of tdms information about the data.
[will work for kudos]

Exchange 2010 Enterprise - Online Archive not visible in office 2013 professional plus and mailbox shared

Hi!
Outlook 2013 professional plus was working perfectly weeks ago, then out of nowhere new profiles doesn't have visible in Outlook the online archive and the shared mailboxes, however it shows up in OWA.
It was given full permission for those users with no results, online archive is enabled, profiles were already deleted and recriated.
The older profiles work perfectly.
We have the services ActiveSync, Autodiscover, Outlook Anywhere, OWA and they're all working with no errors.
Regards
Tiago Barradas

Hi Tiago,
From your description, OWA works work, so your Exchange server is ok.
I recommend you check the following thing for troubleshooting:
Please configure a mail profile with another user who has an Online Archive on that machine and check the result. If it works well, there is something with the problematic mailbox. If the issue persists, the issue is related to your Outlook.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2010 Enterprise – Online Archive not visible in Office 2013 Professional Plus and the Share mailbox.

Hi!
Outlook 2013 professional plus was working perfectly weeks ago, then out of nowhere new profiles doesn't have visible in Outlook the online archive and the shared mailboxes, however it
shows up in OWA.
It was given full permission for those users with no results, online archive is enabled, profiles were already deleted and recriated.
The older profiles work perfectly.
We have the services ActiveSync, Autodiscover, Outlook Anywhere, OWA and they're all working with no errors.
Regards

Hi,
According to my known, this issue could be caused by Outlook cannot reach SCP so cannot get autodiscover.xml.Issue with creating folders caused by missing on TS following registry entry:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\15.0\Outlook\Namespaces\{0006F017-0000-0000-C000-000000000046}\FolderTypes
Could you please check it?

Hp software interface does not load after installing printer 6500A plus

I own a 6500A plus printer that is connected via wifi to my windows 8.1 laptop. At certain point in time the desktop icon stopped functioning, i.e double cliking it does not do anything. The same happens if i do that through start->programs->hp...
more info:
1. running HP Officejet 6500 E710n-z.exe from the install folder does nothing (also when running as admin)
2. installation of the software (the full package) completes with no errors
3. printer prints fine and scans throught the printer interface wihtout a problem
4. tried uninstall and reinstall 2-3 times, both as a wireless printer and USB printer, no errors during install
5. The hp print and scan doctor, finds no problem and at the end im able to run Test Scan and the interface opens and works fine.
6. i ran sfc /scannow it says it founds some problems it cant repair - dont know if it means anything
7. in the Devices and Printers screen i see the printer listed and i'm able to print a test page
dontknow what to do next

Hello Salmonela,
Welcome to the HP Support Forums!
That is a very well done post, very informative. Regarding the software interface not loading, I would like to suggest a means of uninstall and install that you may not have tried.
I would like you to use the Microsoft Fixit to uninstall. Then use the HP Printer Install Wizard to install the software again.
Let me know if this clears things up.
Happy Turkey Day!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Powerpivot add-in menu does not show in Excel 2010

To whom it may concern,
Sometimes, excel.exe *32 is left in the windows 7 professional task manager but all excel sheets are closed (sometime VB script opens excel sheet, and then close the excel sheet); then, manually open an excel sheet 2010 with powerpivot add-in,
powerpivot add-in menu does not show in Excel 2010. If excel.exe *32 is deleted from task manager manually, then, open Excel 2010 with power-pivot add-in, the powerpivot add-in menu is always visible. Try to figure out why excel.exe *32 is still left running
in the task manager.
jianmin chen

Ed, I read your reply. I thought about closing it before, but today I still experience the same issue after I reinstall the powerpivot for Excel 2010.
I came cross powerpivot error: unable to load the table in the powerpivot windows when the excel sheet is opened, yesterday it worked fine. After I reinstall powerpivot for Excel 2010, SQL 2008, the issue goes away.
And I tried to use pivot table instead of powerpivot in Excel 2010, and then plan to write stored procedure to build some relationships used to set up in powerpivot windows; so, I am still planning to use excel sheet, instead of writing a windows form application.
Try to get more experience in excel.
jianmin chen

IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update

I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
I keep Automatic Updates on and they install as soon as they are available.
Everything on my PC was running fine 11/25/13.
I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
It also seemed to affect Firefox which does not completely load pages either.
Any shove in the correct way to help solve this would be helpful.

Robert -
Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful. However, your response is inadequate on two counts.
First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows. Of course it would
help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft. Even if the exact cause is found, it is not likely that anyone here will
be able to fix the problem. There are literally hundreds of people complaining about this problem in multiple forums. If you know your consumer behavior metrics, then you know that means tens of thousands are affected. This is systemic, not
a random problem on a few errant machines. Microsoft needs to know that they have a major problem on their hands and they need to fix it. I saw this problem starting with IE 10. Is it any wonder that in that time, IE usage has fallen greatly
while Chrome has become the dominant browser? (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
IE.)
So thanks Robert for all your help in the past, but this response isn't helpful.
Microsoft, are you listening? Fix your browser.

Icloud add-in for outlook does not load

I have the sync working for calendar and contacts between icloud and Outlook-- but when I close Outlook, the icloud Add-in for Outlook does not load-- the icloud label does not appear on the ribbon at top of Outlook. I must go to File> Options> Add-ins> Manage Com Add-ins--- and manually check iCloud Addin to get it loaded. It will not load at start-up automatically as it should.

I struggled with this but found the answer. You need to set the LoadBehaviour property in the Registry to 2 (Load at Start Up).
Run RegEdit
Navigate to here [HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Apple.DAV.addin]
LoadBehaviour will probably be sitting at 0. Double click that to open, change it to 2 and you're done.
Open Outlook, the Add-in will probably still be inactive. MAke it active, close Outlook, open it again and it should work...

"I do not get any message or option to add exception" - Using Self signed cert -Images does not load

Wr are have two web servers one for app and another for loading images. Both are behind Kemp Load balancer and are using self signed certs from the load balancer. The images does not load when using Firefox 3.x. I load with IE and Firefox 2.x. With firefox 3.x it does not give a message to "add exception". I only get one certificate message to add exception for the app server. I do not get the certificate message or pop up for the imaging server with Firefox 3.x.
== This happened ==
Every time Firefox opened
== Always ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You have a lot of information in packed in the "More system details..." (in the right-hand column), where it looks like you found a solution. If not take a look at "Problematic Extensions" the AVG Free installation of their "'''AVG Free Search'''" can cause such problems. Directions to fix that are specific and involve reinstalling AVG Free without the Link Scanner component.
* http://kb.mozillazine.org/Problematic_extensions

PDFMaker is not loading in outlook 2013

I have sucessfully installed Adobe Acrobat XI standard on Windows 7 with Office 2013. The add-in function of the pdfmaker is not working in Outlook, it is just not possible to activate pdfmaker - outlook is giving an error that this add in is not loaded because of a runtime error during loading.
I have tried to solve the problem with suggestions that can be found on the help pages of adobe like run repair of acrobat and activate registry manually - nothing helped.
Does anybody know how to solve this problem?
BR
Gerald

No mention of the Acrobat version. You need at AA XI at least and I think the updates are also needed. Otherwise, the upgrade to OFFICE 2013 has just required that you upgrade Acrobat also to be compatible with OFFICE.

Power Map in Excel 2013 (Office 2013 Professional Plus) will not show up in ribbon

I have tried literally everything and nothing works.
I can download the preview version of the Powermap addin and it works.
But by default the add-in will not show up in the ribbon.
I uninstalled , reinstalled, re-ran SP1 of office 2013. double checked the load behaviour,
ran a repair.. nothing works.
Powerview displays fine, Bing Maps... just not Power Map

Hi Kenneth,
Since you are using Office 2013 Professional Plus, you can only use Power Map Preview for Excel 2013, which is an unsupported add-in. See:
https://support.office.com/en-in/article/Power-Map-for-Excel-82d65bd7-70c9-48a3-8356-6b0e82472d74
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Firefox 33.1 does not load Adobe Flash Player 15.0.0.223

As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
By the way:
Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
Enjoy!

Please refrain from posting scattergun boilerplate suggestions.
Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it.

Why ribbon XML does not work in Excel 2007?

I installed 4 VSTO Excel add-ins on an Excel 2007 PC today. The two that use a visual designer ribbon worked fine. But the 2 that use a Ribbon (XML) did not. The add-in starts ok. But the ribbon does not show. Why would that be?
I wrote two more add-ins to demonstrate the problem. One puts an OK button on the ribbon using the visual designer. That add-in installs on the excel 2007 PC and works as it should. But the 2nd, an add-in that uses Ribbon (XML) to put a button on the
ribbon, does not work. The add-in does not display on the ribbon.
Here is the code of the Ribbon (XML) add-in project. How to get a ribbon (XML) ribbon to display in excel 2007?
thanks,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Xml.Linq;
using Excel = Microsoft.Office.Interop.Excel;
using Office = Microsoft.Office.Core;
using Microsoft.Office.Tools.Excel;
namespace ExcelAddIn4
public partial class ThisAddIn
private void ThisAddIn_Startup(object sender, System.EventArgs e)
private void ThisAddIn_Shutdown(object sender, System.EventArgs e)
protected override Office.IRibbonExtensibility CreateRibbonExtensibilityObject()
return new Ribbon1();
#region VSTO generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InternalStartup()
this.Startup += new System.EventHandler(ThisAddIn_Startup);
this.Shutdown += new System.EventHandler(ThisAddIn_Shutdown);
#endregion
<?xml version="1.0" encoding="UTF-8"?>
<customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
<ribbon>
<tabs>
<tab idMso="TabAddIns">
<group id="ContentGroup" label="Content">
<button id="Button1" label="ok" screentip="Text"
onAction="Button_OnAction" supertip="Inserts text at the cursor location"/>
</group>
</tab>
</tabs>
</ribbon>
</customUI>
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Reflection;
using System.Runtime.InteropServices;
using System.Text;
using System.Windows.Forms;
using Office = Microsoft.Office.Core;
// TODO: Follow these steps to enable the Ribbon (XML) item:
// 1: Copy the following code block into the ThisAddin, ThisWorkbook, or ThisDocument class.
// protected override Microsoft.Office.Core.IRibbonExtensibility CreateRibbonExtensibilityObject()
// return new Ribbon1();
// 2. Create callback methods in the "Ribbon Callbacks" region of this class to handle user
// actions, such as clicking a button. Note: if you have exported this Ribbon from the Ribbon designer,
// move your code from the event handlers to the callback methods and modify the code to work with the
// Ribbon extensibility (RibbonX) programming model.
// 3. Assign attributes to the control tags in the Ribbon XML file to identify the appropriate callback methods in your code.
// For more information, see the Ribbon XML documentation in the Visual Studio Tools for Office Help.
namespace ExcelAddIn4
[ComVisible(true)]
public class Ribbon1 : Office.IRibbonExtensibility
private Office.IRibbonUI ribbon;
public Ribbon1()
public void Button_OnAction(Office.IRibbonControl control)
MessageBox.Show("Button_OnAction");
#region IRibbonExtensibility Members
public string GetCustomUI(string ribbonID)
return GetResourceText("ExcelAddIn4.Ribbon1.xml");
#endregion
#region Ribbon Callbacks
//Create callback methods here. For more information about adding callback methods, visit http://go.microsoft.com/fwlink/?LinkID=271226
public void Ribbon_Load(Office.IRibbonUI ribbonUI)
this.ribbon = ribbonUI;
#endregion
#region Helpers
private static string GetResourceText(string resourceName)
Assembly asm = Assembly.GetExecutingAssembly();
string[] resourceNames = asm.GetManifestResourceNames();
for (int i = 0; i < resourceNames.Length; ++i)
if (string.Compare(resourceName, resourceNames[i], StringComparison.OrdinalIgnoreCase) == 0)
using (StreamReader resourceReader = new StreamReader(asm.GetManifestResourceStream(resourceNames[i])))
if (resourceReader != null)
return resourceReader.ReadToEnd();
return null;
#endregion

Hello Steve,
Most probably you have got an error in the ribbon XML markup. See
How to: Show Add-in User Interface Errors for more information.
I have noticed the following xml namespace:
<customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
Use the following one instead:
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui"
Also make sure that specified idMso values exist in Office 2007.
You can read more about the Fluent UI (aka Ribbon UI) in the following series of articles in MSDN:
1.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
2.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
3.
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Add-in does not load on Excel 2013 Professional Plus

Similar Messages

Maybe you are looking for