Add Infotypes to PPOME, PPOCE, PPOSE

Hi every body!!
do you how can i add a new Infotype in the Organization and Staffing view??
i think the tabs are infotypes,  is it true??, i need to change an infotype and put otherone
can you help me!!!

In ECC 6.0     carry out the folowing steps.
Create a new Infotype using transaction PPCI
Add tab to transaction PPOME/PPOSE & PPOSW using the following IMG Path:
Personnel Management --> Organisation Management --> Hierarchyu2026 --> Integrate New Infotype --> Add Infotypeu2026.
Add new infotype table T777I
Cheers - hopefully this helps.

Similar Messages

  • OM IT 1005 not showing input fields in PPOME & PPOCE

    Hello friends,
    The business requirement is:
    add IT 1005 Planned Compensation as a tab page in T.code PPOME/PPOCE
    I configured the following in system:
    - IMG>Personnel Mgt>Org Mgt>Hierarchy Framework>Integrate New Infotype> >Add Infotype as Tab Page in Detail Area>Define your onw tab page>Tab Page Definition (this is option one)>
    I added Tab page as z1005, ticked infotype specific and infotype 1005
    Scenario Definition (Hierarchy Framework) > select OME0 >
    Tab Page in Scenario for each Object Type >
    I entered object type S (as we need it for Position), tab page: z1005, and respecitve sequence, I did not enter any report name, screen no, FM for Icons and Donot display is unchecked.
    Once I did this configuration and run PPOME tcode I got the tab page there but in the input fields it is blank and showing text like ##################### just a row like this.
    However when I do the same configuration for IT 1050 Job evaluation, it is working fine there. But 1005 is throwing the above error.
    Can anybody faced the same problem and resolve the above issue or incase some SAP Notes are available for the same.
    thanks
    Sunny

    Hi,
    Please check the table - T77OMTABUS.
    Regards
    Priya

  • Adding a customer infotype in PPOME

    Hello experts,
    I'am trying to add a new customer infotype to PPOME, which should be displayed for all nodes of type "O" - so far, so good. I created the Structure HCI9600 and then I used PPCI without any problems. The new infotype is a part of PPOME, but when I want so save the data, the transaction dumps saying "DYNP_WRONG_SCREEN_TYPE". This is because the screen of the infotype to be processed is a subscreen (Dynpro 7000 of the generated module pool). But I cannot switch the Dynpro to normal dynpro because the PPOME then dumps immediatly.
    So what to do? Nothing found in the OSS...
    Thank you
    T.
    Sorry, the question is solved - never use dynpro 7000!
    Edited by: Thomas Frühling on Sep 12, 2010 8:58 PM

    Hello experts,
    I'am trying to add a new customer infotype to PPOME, which should be displayed for all nodes of type "O" - so far, so good. I created the Structure HCI9600 and then I used PPCI without any problems. The new infotype is a part of PPOME, but when I want so save the data, the transaction dumps saying "DYNP_WRONG_SCREEN_TYPE". This is because the screen of the infotype to be processed is a subscreen (Dynpro 7000 of the generated module pool). But I cannot switch the Dynpro to normal dynpro because the PPOME then dumps immediatly.
    So what to do? Nothing found in the OSS...
    Thank you
    T.
    Sorry, the question is solved - never use dynpro 7000!
    Edited by: Thomas Frühling on Sep 12, 2010 8:58 PM

  • Custom infotype in PPOME

    Dear friends,
    I have added custom OM infotype in PPOME as a new tab page.
    if i create any organisational unit in ppome, i want to know the immidiate parent organisational unit (ie. Objid of the parent org unit) of this newly created org unit.
    Also if the cursor is on some other org unit other than the newly created org unit.
    then i am not able to get the objid of this newly creatd org unit in PBO or PAI of
    my custom infotype screen.
    Any help will be highly rewarded.
    Thanks,
    Vijay.

    Dear friends,
    I have added custom OM infotype in PPOME as a new tab page.
    if i create any organisational unit in ppome, i want to know the immidiate parent organisational unit (ie. Objid of the parent org unit) of this newly created org unit.
    Also if the cursor is on some other org unit other than the newly created org unit.
    then i am not able to get the objid of this newly creatd org unit in PBO or PAI of
    my custom infotype screen.
    Any help will be highly rewarded.
    Thanks,
    Vijay.

  • Error for custom infotype in PPOME

    Hello Experts,
    I have created one custom OM infotype for object position.Now when i am trying to acccess that Infotype in PO13 it is working fine but when i am trying to acccess the custom infotype in PPOME it is giving a dump.
    EERROR:
    Error in the ABAP program "SAPLRHOMDETAIL_PP01" had to be terminated because it has come accross a statement which cannot be exceuted.
    An exception occurred.
    The exception, which is assigned to class 'CX_SY_ASSIGn_CAST_UNKNOWN_TYPE', was not caught in procedure "INIT_SUBSCREEN" "(FORM)" nor was it propagagted by raising clause exception.
    The reason for the exception is :
    The type "" dynamically specified with ASSIGN....CASTING TYPE is unknown.
    Please guide me where i am doing mistake.
    Thanks in advance.
    Shweta

    Hi Sudha,
    PM01 is the tcode.
    Similar questions were already answered in the following threads
    ABAP HR : Infotype Enhancement
    So please search and then post specific queries.
    rgds
    gayathri

  • Add infotypes in transactioncode SWEHR1, 2 and 3

    I would like to add infotype 0041 in transactioncode SWEHR1, but where can I find which Obj.type I should use.
    BR  //  Peter B

    Hi Peter,
    Please use BO DATESPECS for infotype 41.
    Regards,
    Lim...

  • Add Infotype 0045(Loans) to Personal Profile

    Hi All,
    I am currently on EHP6 and i am trying to add Infotype 0045 to personal profile application but i am facing issues.
    I have followed the steps with few exceptions from the below link:
    Adding any Info Type IN ESS in EHP5/6 through WebDynpro Configuration
    I have added the infotypes in HRPAD and V_T7XSSPERSUBTYP.
    I have created all the required configuration(FORM_UIBB, LIST_UIBB and OVP_COMPONENTS).
    I have created proper wiring as well and implemented the Default start date BADI as well.
    I have already make it to work for few other Infotypes.
    I am not sure why is it not working for IT0045.
    Please let me know in case you have any views on this.
    Regards,
    Mayank

    Hi,
    i have already checked all the settings and they all look fine.
    However, to be on the safer side i have also EDITED the same configurations and wiring to make it work for other infotype, and it works correctly for others.
    The problem is something specific to IT0045.
    Regards,
    Mayank

  • ESS to add Infotype 0022 (Education infotype)

    Hi All,
    I am SAP HR consultant, Don't know ESS portal work,
    here my client as asked to add infotype 0022 to ESS potal under Personal data link.
    Please give me detail step by step procedure to add Education infotype to ESS portal under Personal Data link.
    Thanks for your help and support in advance.
    Thanks
    Srilatha

    Try this
    Personnel Personal Data  ESS settings for specific services ESSPM Information (ESS): Determine subtypes
    srilatha there is another forum for ESS in SDN SAP ERP HCM Employee Self-Service
    Check this thread once
    https://forums.sdn.sap.com/click.jspa?searchID=24480494&messageID=6971882
    Edited by: Sikindar on Apr 6, 2009 9:39 AM

  • Add custom infotype on ppome

    Hi all,
    I'm struggling with adding a custom infotype (tab) to a position in transaction PPOME.
    I searched on sdn and the net, but I'm not able to find a solution.
    Problem is that the tab is displayed, but there's only the message 'no subscreen found' displayed.
    I've done following steps :
    - created the infotype using PM01
    - created subscreen 7000 using PPCI
    - added subscreen 7000 in table T77ID
    - adapt the sequence of the framework in SPRO
    I'm sure that I'm missing something, but what ?
    Thanks for the help !
    best regards,

    Hello,
    Note 327614 and 385019 might help troubleshoot your issue
    Kind regards
    Sarah

  • Infotypes and sub-infotypes maintanence in PPOCE

    Hi,
    In PPOCE have added IT1009 (health examination) as tab page but how to add sub infotype details in IT1009 tab page...???
    Please help....hope for your reply...
    Thanks
    Sonu

    Please help.......!!!!

  • Add infotype in dropdown in PA20

    Hi,
    User is missing an infotype from dropdown list in PA20. The infotype definitely exists. I checked the table V_T588B but was unable to check if this infotype was available for the particular user group.But I am pretty sure that this IT is available for this UG.
    My question is: how do you add an infotype to the dropdown list?
    Will appreciate your help.
    Thanks,
    Monika.

    Hi,
    Please check SU3 T.Code in your user's ID. In this T.code there is one tab called parameters under this you should maintain your UGR (User Group), MOL (Country Grouping). After you maintain this values check in PA20/PA30.
    Based on the UGR, infotypes will maintain under Infotype menus.
    Thanks & Regards
    Rajesh

  • Infotype in PPOME , disable display_period-begda and display_period-endda

    Hi everyone, i create an infotype custom with subscreen; then create association for infty and type position 'O'.
    From subscreen MPXXXX00 subscreen 7000 i have to disable     dynpname = 'SAPLRHOMDETAILMANAGER'.
        dynpnumb = '0300' fields DISPLAY_PERIOD-BEGDA and DISPLAY_PERIOD-ENDDA.
    With f.m. 'DYNP_VALUES_UPDATE' i can change the value , but not the properties.....
    How can I do , if is possible ?
    Thank' s a lot !!!!!

    Hi Marco.
    There is chance to do what you want using implicit enhancements, but you must use it carefully.
    In the include LRHOMDETAILMANAGERF01 there is a subroutine named INIT_PERIODS, this subroutine is called from a PBO module of Dynpro 0300, so as you can not modify directly this standard include you must use implicit enhancements.
    After you have created the enhancement you will be able to add some code at the end of subroutine..  you can make use of field "act_info-tabtype" to identify the active tab, after that you should perform a loop at screen and change the input field to 0.
    the source code looks like this:
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(1) Forma INIT_PERIODS, Final                                                                                A
    $$-Start: (1)----
    $$
    ENHANCEMENT 1  ZHCMOM001.    "active version
      if act_info-tabtype = 'IT9001'.
        loop at screen.
          if screen-name = 'DISPLAY_PERIOD-BEGDA'.
            screen-input = 0. "Inactivate
            modify screen.
          endif.
        endloop.
      else.
        loop at screen.
          if screen-name = 'DISPLAY_PERIOD-BEGDA'.
            screen-input = 1. "Activate
            modify screen.
          endif.
        endloop.
      endif.
    ENDENHANCEMENT.
    $$-End:   (1)----
    $$
    Don't forget activate the enhancement.
    Let me know if it works.
    Regards

  • Infotype in PPOME

    Hi,
    I created a new infotype and by customizing a new tab is appearing in PPOME with it.
    The issue is the content of the screen itself. The tab in PPOME is nothing but a blank display (screen 7000). Infotype has not a screen 7000. How can this screen be filled with the infotype?
    Cheers.

    Hi,
         Refer
    https://forums.sdn.sap.com/click.jspa?searchID=4152994&messageID=2201930
    https://forums.sdn.sap.com/click.jspa?searchID=4152994&messageID=3771704
    https://forums.sdn.sap.com/click.jspa?searchID=4152994&messageID=2201930
    Regards

  • How to add infotype to a role

    Hello friends
    I am tring to create a link for Infotype 376 on ESS benefits page. I understand i need to add this Infotype to the ESS role in R/3 through PFCG.
    Is this the correct way? If yes, please let me know how do I add the IT to the role?
    If not, please let me know the correct procedure.
    thanks a lot
    pomila

    hi
    In case of business package or content related to any thing to R/3 every authorization has to be at backend and authentication to be in portal.In this case you add the infotype at backend and migrate the role ESS to portal but infotype system (BW)has to be single sign on with portal or user mapped and user must have authorization there.hope this helps you please do not forget to give points
    with regards
    subrato kundu

  • How to add infotype 0105 in PA70?

    Hi Experts,
    I wanted to add the communication infotype in the fast entry.
    I have tried to add the infotype in Table 588Q and T 588R.
    Still I am not able to do that. Can anyone plz guide me how to do that?
    Thank You in advance.
    Manjiri

    Hi Manjiri,
    When you enter 0105 to infotype area and press create/change/delete you can use the PA70 transaction for 0105 infotype. No need to add it to the list.
    Regards,
    Dilek

Maybe you are looking for