Add IP to EDK not connected a Bus

i repeat the design Camera Frame Buffer Demo with the EDK tool ,i add the ip (intellectual property ) with "create or import peripheral" and i use the system generator to add the ip (vsk camera vop ) but i have a problem when i want to add the ip (dvi in ,dvi out,camera) because These ip is not connected to the bus (plb ,opb..)
please any one help me to add these ip ??

You might want to see if you can interface in RTL with EDK system as sub-project in ISE.
If I have misunderstood, Please give some more details of the system.
Regards
Sikta

Similar Messages

  • How can I add a Google account not connected to a GMail account to Messages in OSX Mountain Lion?

    With iGoogle going offline soon, and being myself averse to using Google+ for social networking due to what I perceive as a blatant disregard for my privacy, I'm trying to save my few Gchat contacts, as I don't have many other ways to contact these specific people. However, I'm having trouble connecting my Gchat (or Google Talk if you prefer the term) to Messages. It doesn't recognize that my google account is tied to a verizon email address, not a gmail address, and refuses to acknowledge my password as correct (even though I typed it correctly at least five times trying).
    I haven't seen anyone else having this problem, and I'd prefer to call customer support about this, but this seems to be the next best option.

    Hi,
    iChat and Messages (and for that matter any other Jabber capable App) will not accept non Google Mail Google IDs as Google Talk IDs
    When Google launched Google Talk it was only for those IDs issued under @googlemail.com or @gmail.com that were eligible.
    Later they allowed other Google IDs to Chat but only from Web Browser Logins.
    There was a period when they did seem to expand the non Googlemail IDs into the GoogleTalk fold for external apps to also allow access but this was dropped after a while.
    10:11 pm      Thursday; October 3, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Excel add-in Terminal Service, not connection is made

    <p>I have a problem with Excel add-in on Terminal Service. Theinstallation went all right and the add-in is found by Excel. Theproblem is when I try to connect to one of the essbase serversnothing happens. When I check the server no login attempt has beenmade, the funny thing is that when I enter a server name that doesnot exist I get an error message telling me that the servercouldn&rsquo;t be found (so clearly the add-in is doing something).The versions that I&rsquo;m using for the add-in is 7.1.5 andI&rsquo;m trying to connect to a servers with the essbase versions7.1.5 and 7.1.2. I have installed this add-in on several desktopsand then it&rsquo;s working as expected.</p><p> </p><p>Is this a known problem? Have anyone had this problem before? Iwould really appreciate any help I can get regarding thismatter.</p><p> </p><p>I should probably also tell you that I had an older version ofExcel add-in installed and working before, the version was 7.1.2.This was uninstalled before the 7.1.5 version was installed.</p><p> </p><p>Thanks</p><p>Fredrik Arbin</p>

    This sounds liek an issue we have seen a number of times.<BR><BR>When you first connect you will need write access to the essbase\ folder on the machine where Essbase add-in is installed. It writes the connection information provided to essbase.ini and this is then used the next time you log in.<BR><BR>You should be able to narrow the write area down further, can't remember exactly where the write is required - there are other areas as well from memory.<BR><BR>Hope this helps<BR><BR>Andy King<BR>www.analitica.co.uk

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

    Question
    When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

    Try some basic troubleshooting.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • How do I add an offline translation to the Bible app to use it when not connected to a network?

    How do I add an offline translation to the Bible app to use it when not connected to a network?

    You will need to contact the developer of the app and ask if that is possible. If not, you'll need to look for another app that doesn't require a network connection to function.
    Regards.

  • Could not connect to wicd's D-Bus interface. Check the wicd log for er

    Having issues getting wireless to work on Acer V3 551.  Wired works great.  I'm new to Arch from Ubuntu, so please be nice to me
    On startup, I get two error dialog boxes:
    #1: Could not connect to wicd's D-Bus interface. Check the wicd log for error messages.
    #2: The wicd daemon has shut down. The UI will not function properly until it is restarted.
    Network info:
    23:01:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
    24:02:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
    wicd-curses terminal output:
    wicd-curses
    Can't connect to the daemon, trying to start it automatically...
    Traceback (most recent call last):
      File "/usr/share/wicd/curses/wicd-curses.py", line 1043, in <module>
        setup_dbus()
      File "/usr/share/wicd/curses/wicd-curses.py", line 1031, in setup_dbus
        dbus_ifaces = dbusmanager.get_dbus_ifaces()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 36, in get_dbus_ifaces
        return DBUS_MANAGER.get_dbus_ifaces()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 62, in get_dbus_ifaces
        if not self._dbus_ifaces: connect_to_dbus()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 48, in connect_to_dbus
        return DBUS_MANAGER.connect_to_dbus()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 79, in connect_to_dbus
        proxy_obj = self._bus.get_object("org.wicd.daemon", '/org/wicd/daemon')
      File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 241, in get_object
        follow_name_owner_changes=follow_name_owner_changes)
      File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
        self._named_service = conn.activate_name_owner(bus_name)
      File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 180, in activate_name_owner
        self.start_service_by_name(bus_name)
      File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 278, in start_service_by_name
        'su', (bus_name, flags)))
      File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in call_blocking
        message, timeout)
    dbus.exceptions.DBusException: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.wicd.daemon.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.wicd.daemon.service' for details.
    systemctl status dbus-org.wicd.daemon.service terminal output:
    dbus-org.wicd.daemon.service
       Loaded: error (Reason: No such file or directory)
       Active: inactive (dead)
    I've tried:
    - beginners install suggestions
    - arch wicd suggestions
    - unin/re-installing wicd
    - google research to no avail

    Apologies. First post to the board - will keep post within bracket tags. Sorry for being such a noob.
    Input
    $ systemctl status wicd.service
    Output
    wicd.service - Wicd a wireless and wired network manager for Linux
    Loaded: loaded (/usr/lib/systemd/system/wicd.service; disabled)
    Active: failed (Result: exit-code) since Wed 2013-05-01...
    Process: 972 ExecStart=/usr/sbin/wicd --no-daemon (code=exited, status=1/FAILURE)
    Starting Wicd a wireless and wired network manager for Linux
    It seems like the daemon is already running
    If it is not, please remove /var/run/wicd/wicd.pid and try again.
    wicd.service: main process exited, code=exited, status=1/FAILURE
    Failed to start Wicd a wireless and wired network manager for linux.
    MESSAGE=Unit wicd.service entered a failed state.
    Any thoughts?
    Last edited by roastymctoasty (2013-05-01 15:58:17)

  • WICD "Could not connect to wicd's D-bus interface"

    I'm getting this error when using WICD.
    Could not connect to wicd's D-bus interface. Check the wicd log for error message.
    When I run wicd-client thru the terminal I get:
    [scott@Arch ~]$ wicd-client
    ** (process:1372): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
    ** (process:1372): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
    ** (process:1372): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
    Has notifications support True
    Loading...
    Connecting to daemon...
    Can't connect to the daemon, trying to start it automatically...
    Can't connect to the daemon, trying to start it automatically...
    Failed to find a graphical sudo program, cannot continue.
    I tried to find the wicd config files in /etc/wicd but could not find them. I also cannot seem the find the log file that the error message is telling me to look at.
    I have installed:
    wicd 1.7.2.4-3
    wicd-gtk 1.7.2.4-3
    dbus-core 1.6.2-2
    dbus 1.6.2-1
    slim 1.3.3-5
    xfce 4.10
    xfce4-goodies

    venam wrote:Hello Psyconaughty,
    I remember having the exact similar issue on another distro, however it did not interfere with the connection (I could still connect to the internet correctly).
    What I've done to solve this problem on the other distro is the following:
    dpkg-reconfigure wicd
    update-rc.d wicd defaults
    I am not sure about the commands here, maybe they are not valid for Arch.
    hope this help.
    I tried this earlier and Arch doesn't recognise the commands. I think that is a Debian command(Correct  me if I'm wrong). I also assume that uninstalling it a reinstalling it would do the rconfigure but it it dosen't someone let me know how to auto reconfigure.
    Also I went into my daemon log and saw some falures. The problem looks like it might be ConsoleKit. I have reinstalled ConsoleKit and still getting errors.
    Here is my last loggin (From file /var/log/daemon.log):
    Jul 9 15:58:05 localhost init: Switching to runlevel: 6
    Jul 9 15:58:06 localhost dhcpcd[1416]: received SIGTERM, stopping
    Jul 9 15:58:06 localhost dhcpcd[1416]: eth0: removing interface
    Jul 9 11:59:28 localhost [ 1.773006] udevd[82]: starting version 185
    Jul 9 11:59:28 localhost [ 4.346105] udevd[198]: starting version 185
    Jul 9 11:59:30 localhost ntpd[520]: ntpd [email protected] Sat Jun 9 05:23:54 UTC 2012 (1)
    Jul 9 11:59:30 localhost ntpd[521]: proto: precision = 0.248 usec
    Jul 9 11:59:30 localhost ntpd[521]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
    Jul 9 11:59:30 localhost ntpd[521]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    Jul 9 11:59:30 localhost ntpd[521]: Listen and drop on 1 v6wildcard :: UDP 123
    Jul 9 11:59:30 localhost ntpd[521]: Listen normally on 2 lo 127.0.0.1 UDP 123
    Jul 9 11:59:30 localhost ntpd[521]: Listen normally on 3 lo ::1 UDP 123
    Jul 9 11:59:30 localhost ntpd[521]: peers refreshed
    Jul 9 11:59:30 localhost ntpd[521]: Listening on routing socket on fd #20 for interface updates
    Jul 9 11:59:38 localhost dbus[471]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
    Jul 9 11:59:39 localhost console-kit-daemon[597]: WARNING: polkit_authority_get: Error getting authority: Error initializing authority: Could not connect: No such file or directory
    Jul 9 11:59:39 localhost dbus[471]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
    Jul 9 11:59:44 localhost dbus[471]: [system] Activating service name='org.wicd.daemon' (using servicehelper)
    Jul 9 11:59:44 localhost dbus[471]: [system] Activated service 'org.wicd.daemon' failed: Launch helper exited with unknown return code 1
    Jul 9 11:59:44 localhost console-kit-daemon[597]: CRITICAL: polkit_authority_check_authorization: assertion `POLKIT_IS_AUTHORITY (authority)' failed
    Jul 9 11:59:44 localhost dbus[471]: [system] Activating service name='org.wicd.daemon' (using servicehelper)
    Jul 9 11:59:44 localhost dbus[471]: [system] Activated service 'org.wicd.daemon' failed: Launch helper exited with unknown return code 1
    Jul 9 11:59:45 localhost console-kit-daemon[597]: CRITICAL: polkit_authority_check_authorization: assertion `POLKIT_IS_AUTHORITY (authority)' failed
    Jul 9 12:00:09 localhost console-kit-daemon[597]: CRITICAL: polkit_authority_check_authorization: assertion `POLKIT_IS_AUTHORITY (authority)' failed
    Jul 9 12:00:10 localhost console-kit-daemon[597]: CRITICAL: polkit_authority_check_authorization: assertion `POLKIT_IS_AUTHORITY (authority)' failed
    Jul 9 12:00:29 localhost dbus[471]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Jul 9 12:00:34 localhost dbus[471]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
    Jul 9 12:00:34 localhost dbus[471]: [system] Successfully activated service 'org.freedesktop.UPower'
    Jul 9 12:00:34 localhost dbus[471]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
    Jul 9 12:00:34 localhost dbus[471]: [system] Successfully activated service 'org.freedesktop.UPower'
    Jul 9 12:00:34 localhost dbus[471]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
    Jul 9 12:00:35 localhost dbus[471]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
    Jul 9 12:00:35 localhost dbus[471]: [system] Successfully activated service 'org.freedesktop.UPower'
    Jul 9 12:00:35 localhost dbus[471]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
    Jul 9 12:00:35 localhost dbus[471]: [system] Successfully activated service 'org.freedesktop.UPower'
    Jul 9 12:00:59 localhost dbus[471]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed out
    Jul 9 12:00:59 localhost dbus[471]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
    Jul 9 12:01:24 localhost dbus[471]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed out
    Jul 9 12:01:24 localhost dbus[471]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
    Jul 9 12:01:49 localhost dbus[471]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed out
    Jul 9 12:02:30 localhost dbus[471]: [system] Reloaded configuration
    Jul 9 12:02:30 localhost dbus[471]: [system] Reloaded configuration
    Jul 9 12:02:30 localhost dbus[471]: [system] Reloaded configuration
    Jul 9 12:02:30 localhost dbus[471]: [system] Reloaded configuration
    Jul 9 12:04:17 localhost dhcpcd[955]: version 5.5.6 starting
    Jul 9 12:04:17 localhost dhcpcd[955]: eth0: waiting for carrier
    Jul 9 12:04:19 localhost dhcpcd[955]: eth0: carrier acquired
    Jul 9 12:04:19 localhost dhcpcd[955]: eth0: sending IPv6 Router Solicitation
    Jul 9 12:04:19 localhost dhcpcd[955]: eth0: sendmsg: Cannot assign requested address
    Jul 9 12:04:19 localhost dhcpcd[955]: eth0: rebinding lease of 10.42.0.65
    Jul 9 12:04:19 localhost dhcpcd[955]: eth0: acknowledged 10.42.0.65 from 10.42.0.1
    Jul 9 12:04:19 localhost dhcpcd[955]: eth0: checking for 10.42.0.65
    Jul 9 12:04:23 localhost dhcpcd[955]: eth0: sending IPv6 Router Solicitation
    Jul 9 12:04:24 localhost dhcpcd[955]: eth0: leased 10.42.0.65 for 3600 seconds
    Jul 9 12:04:24 localhost dhcpcd[955]: forked to background, child pid 987
    Jul 9 12:04:26 localhost dhcpcd[990]: dhcpcd already running on pid 987 (/run/dhcpcd-eth0.pid)
    Jul 9 12:04:27 localhost dhcpcd[987]: eth0: sending IPv6 Router Solicitation
    Jul 9 12:04:31 localhost dhcpcd[987]: eth0: sending IPv6 Router Solicitation
    Jul 9 12:04:31 localhost dhcpcd[987]: eth0: no IPv6 Routers available
    Jul 9 16:09:11 localhost console-kit-daemon[597]: CRITICAL: polkit_authority_check_authorization: assertion `POLKIT_IS_AUTHORITY (authority)' failed
    Jul 9 16:09:36 localhost console-kit-daemon[597]: CRITICAL: polkit_authority_check_authorization: assertion `POLKIT_IS_AUTHORITY (authority)' failed
    Jul 9 16:10:01 localhost dbus[471]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
    Jul 9 16:10:01 localhost dbus[471]: [system] Successfully activated service 'org.freedesktop.UPower'
    Jul 9 16:11:34 localhost init: Switching to runlevel: 6

  • I want to load Firefox on my computer at home, which is not connected to the internet. I want to download Firefox to my flashdrive and then add it to my computer at home. When I try to download Firefox, it won't let me change the path of where it download

    I want to download Firefox on a flashdrive so I can then download it to my home computer which is not connected to the internet. When I download Firefox, it won't let me change the path and so tries to download on a public computer, which isn't allowed. The reason I want it on my home computer is because I'm creating web pages and I want to view my html pages using a variety of browsers, including Firefox.

    From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
    You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

  • IPod Touch not connecting - all support methods tried.

    I'd just like to say right off the bat that I've already tried every method on the support pages that has anything to do with an iPod not connecting or not being read into iTunes. That means I've reset the iPod, completely uninstalled the reinstalled iTunes(several times), reinstalled the drivers in the Device Manager, etc.
    So, here's the deal: I'm currently running iTunes 8 on Windows XP 32-Bit. My iPod Touch used to be able to connect to my computer, but for some reason a few months ago it started having problems. When it first stopped working, it showed up in the Device Manager as "Apple iPod" under Imaging Devices. However, "Apple Mobile Device Support" showed up under Universal Serial Bus Controllers.
    Since it was reading the device as a camera, I found online that to fix it you install the USBAAPL driver onto the iPod by manually updating the driver. The Wizard did not see the USBAAPL driver as an improvement on the current driver and thus refused to install it. I therefore tried deleting the current driver, but it still only reinstalled the generic usb driver. After much fiddling around, "Apple Mobile Device Support" in the USB Controllers section eventually changed to "Apple Mobile Device USB Driver." I tried updating this driver, and that made "Apple iPod" stop appearing in the Imaging Devices category.
    Where I'm at now is, every time I plug in the iPod, the only change in Device Manager is that "Apple Mobile Device USB Driver" shows up in USB Controllers. When I plug the iPod in, iTunes freezes up for a minuter or two even though every other program is running perfectly fine, which makes me think that it's recognizing the iPod on some level. But it still won't show up in iTunes and (now that it isn't seen as a camera anymore) won't show up in My Computer anymore.
    Does anybody have any clue how I might . . . you know . . . make use of my investment? Or is Apple just selling very expensive paperweights now? Like I've said, I've been trying fix after fix from all the support pages that have anything to do with the iPod not connecting.
    Any help would be very much appreciated.

    It really sounds like you spent too much time fiddling with drivers and have gotten things really messed up.
    I would start this way if it was my machine:
    1. In the Control Panel > Add/Remove Programs - remove everything Apple. That includes iTunes, Apple mobile device services, QuickTime and anything else.
    2. Reboot your computer
    3. Download and install the latest version of iTunes. Let the software do the full install and don't mess with Custom install if offered.
    4. Reboot again.
    5. Try your iPod and see what happens. If your iPod is still not recognized, use this article to troubleshoot http://support.apple.com/kb/TS1567
    6. If it is recognized as a camera, use this article: http://support.apple.com/kb/TS1857
    If it continues to be a problem, you are probably going to have to do some registry editing to clear out the errors or possibly a reinstall of XP. Hopefully not.

  • ITunes could not connect to the iTunes Store "Error Message"

    I recently added iTunes 7.6 to my Windows XP operating system at the same time when I added an *Ion USB Turntable (TTUSB).* I currently have the 80G iPod with the larger video screen. I added in the supplied software of the EZ Vinyl Converter. The software reads from Gracenote and imports into iTunes okay. But now my PC cannot access the iTunes store to buy songs, read the tracks on the discs, or display new album artwork. The diagnostic read the network connectivety test, the CD/DVD drive, and iPod connectivity tests all read okay. I followed the directions on checking the network settings under the Internet Options Tool "Connections" Lan Settings and the Automatic detection and still no dice. All I get is "Make sure your network is active."
    Can anybody help out their?
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 ED842AA-ABA M7250N
    iTunes 7.6.2.9
    QuickTime 7.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 1.1.4.7
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 425XXXXXXXXXXXXX
    Current user is an administrator.
    The current local date and time is 2008-07-06 01:07:54.
    iTunes is not running in safe mode.
    Video Display Information
    RADEON X300 Series
    RADEON X300 Series Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {1C6FC80D-7300-43A2-A78B-9DFA93BF7727}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: XXXXXXXXXXXX
    Subnet Mask: XXXXXXXXXXXX
    Default Gateway: XXXXXXXXXX
    DHCP Enabled: Yes
    DHCP Server: XXXXXXXXXX
    Lease Obtained: Sun Jul 06 01:02:58 2008
    Lease Expires: Sun Jul 06 02:02:58 2008
    DNS Servers: 66.51.205.100
    66.51.205.100
    66.51.206.100
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    iTunes has never successfully accessed iTunes store.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.7.3),
    E: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.03
    Audio CD in drive.
    Found 12 songs on CD, playing time 39:58 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:18:00
    Track 3, start time 07:16:25
    Track 4, start time 11:23:70
    Track 5, start time 15:23:17
    Track 6, start time 20:15:17
    Track 7, start time 23:04:67
    Track 8, start time 26:10:40
    Track 9, start time 28:59:05
    Track 10, start time 31:31:42
    Track 11, start time 33:32:32
    Track 12, start time 37:03:57
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.6.2.9 is currently running.
    iTunesHelper 7.6.2.9 is currently running.
    Apple Mobile Device service 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
    Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
    Intel(R) 82801GB USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801GB USB2 Enhanced Host Controller - 27CC. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Connected Device Information:
    HP_ADMINIST (L:\), Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number: 8K645xxxV9R
    Bus Speed: 61440

    I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
    "iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
    The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
    After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
    Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
    Ken Newquist
    Lafayette College

  • X10 not connecting to mobile data networks after upgrade to Android 2.3

    My X10 does not connect to GPRS / EDGE / 3G / HSDPA after the upgrade to 2.3. Wifi is no problem, though.
    I used the SIM card in another X10 with Android 2.1, no problem, got an HSDPA connection. And yes, all the boxes are checked: "Data Enabled" and "Data Roaming";
    I had problems before the upgrade to connect to data networks when roaming, but never in my home network. Now, it doesn't seem to work at all.
    Any advice?

    go to settings -> sony ericsson -> data download
    or
    settings -> wireless & networks -> mobile networks -> access point names -> MENU -> add New -> enter the APN info -> MENU -> Save
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Deskjet 3050 not connecting to my wifi network

    Accidentally pressed Restore Default and my printer will not connect to my wifi network. How do reinstall it please?

    Hi @Rotini 
    A full feature driver for Yosemite is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
    With that being said, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
    Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
    Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
    Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
    Go to the network tab along the top of the EWS.
    Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
    You have now completed the Wireless configuration, follow the next 3 steps to start printing.
    The blue wireless light will go solid, put the Mac back on your own network.
    Add the printer to the System Preferences.
    Print 
    Please let me know if this resolves the issue. I look forward to hear from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • New AirPort Extreme will not Connect to iPhone 5

    I just upgraded my old AirPort to an AirPort Extreme.  Everything seems to be working fine, except my iPhone 5 will not connect to the new Airport.  When it is selected as the new wifi option, the connection wheel just spins and spins and it will not connect to the wifi.

    Reset the airport to factory and start over.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    In the new setup, keep all names short, no spaces and pure alphanumeric.
    eg AEgen6 for base station name.
    Since you have issues with wireless name the bands differently.. AE24ghz and AE5ghz
    Set no security to begin with.. Set 2.4ghz to channel 11, 6, 1 in that order.
    Once the iphone connects.. please set WPA2 Personal security with a pure alphanumeric password of 10-20 characters.

Maybe you are looking for