Add iviews under the detailed navigation

hello
how can i add iviews in the left side under the detailed navigation
eg: like the "quick poll"  in the "news" page from the "eu_role"
thx
irina

Hi,
you can use the following steps to do this( for this you need to have content admin rights)
goto content administration ->portal content -> portal users -> standard portal users ->default frame work page -> desktop inner page -> open it and goto your iview which you might have created and right click  and add iview to page as delta link or copy.
or
goto content administration ->portal content -> content provided by sap ->
end user content -> standard portal users -> default frame work page ->
desktop inner page -> open it and goto your iview which you might have created and right click  and add iview to page as delta link or copy.
please i will suggest you better you create you own portal desktop and do all this operations since if you alter any think in the default frame work page it will have the impact on all of theuser who are using that portal.
*******please reward points if the information provided is helpful to you**************

Similar Messages

  • How can I add an iView to the Detailed Navigation itself

    How can I add an iView to the Detailed Navigation itself and hides the other hyperlinks?

    To add an iview on the Detailed navigation side of a page:
    1.Double click the page which brings up the page editor.
    2.Click the Display dropdown box and choose Dynamic Navigation.
    3.Add an ivew to it.Save and add the page to a role to see the results.
    if this is not u wanted, post back here.
    Regards.

  • Search IViews in the detailed navigation and display history data too

    hi all
    we have a req. that we will put an input box and a search button in the detailed navigation pane of the portal.
    the user need to put the transaction code and the corrosponding iview opens up in the content area.
    we first needed the way to be able to search that transactional iview inside the iviews folder but were unable todo so. what we did is to hard  code the pcd location of each iview in dynpro and uploaded that file which works fine.my questions are
    1.do we have  a way to search for a part.transacion based on its code in a part. folder
    2.we need to keep track of what iviews user searched for in past and promp him with that T-code when he starts writing the code. eg if he type S the prompt lists all T-codes which he seached in past starting from S. very much like it happens in google.com or over ur browser address bar.
    plz help if anyone is possible.
    thanx in advance

    Hi Vaibhav,
    What do you mean by suppressed?
    Is it gone, or just closed?
    If it is just closed, you can try 2 things:
    1. Check if the property "Initial State of Navigation Panel" of the page has any influence.
    2. There is a javascript method that opens it.
    You can see it by importing the file '<b>com.sap.portal.layouts.framework.par.bak</b>'.
    Navigate to
    System Administration -> Support -> Support Desk -> Portal Runtime -> Browse deployment
    then the folder
    ROOT/WEB-INF/deployment/pcd
    and press download.
    Import from par to Developer Studio, and check the javascript files under dist/PORTAL-INF for a function called something like 'expandTray'.
    Hope that helps,
    Yoav.

  • How to add links in the detailed navigation area of the navigation panel

    hi everyone,
    I had developed 4 iviews. 2 of those iviews i added to 2 different pages. And the 2 pages added to workse and assigned a role. i assigned this role to user. and it is working fine.
    i want to add remaining to iviews as links.
    how to add the links in the detailed navigation area of the navigation panel.
    regards
    sunil kumar.ch

    Hi sunil,
       Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
    Regards,
    Harini S

  • How can you set the default width of the 'Detailed Navigation iView'?

    Hello,
    we would like to reduce the default width of the 'Detailed Navigation iView' in order to save some screen space.
    So far, we havn't found the right item in the portal admin to do this.
    Any help would be much appreciated! Thanks in advance.
    Frank Schülke, E.ON Ruhrgas, Germany

    Hi Frank,
    You can change the width of this navigation iview  by changing the value of "defaultExpWidth" in the file WAandNAVPanel.js present in the par file com.sap.layouts.framework.par from default value 220 pixels to the value you want.
    upload the changed par file and restart the server.
    Hope this helps,
    (if not do get  back )
    Regards,
    Uma.
    Do award points for helpful answers in SDN!!!!!!!:-)

  • Employee search iview integration into Detailed navigation

    EP7
    ESS/MSS 600
    ECC6
    Hello,
      In the EP6 version of the TeamViewer it was easily added to the "Detailed Navigation" part of the page.  Does anyone know how to achieve this in EP7 with Employee Search?
    thx
    Larry

    Any iViews can be added to the navigation panel. All you need to do is add them to another iView or page as either a related link or as a dynamic navigation. The related links appear under a section in the navigation panel called "related links", Dynamic navigation iViews appear with their proper name in the navigation panel.
    Cheers

  • Different links in the detailed navigation, based on URL alias

    <u>What I'm trying to do :</u>
    Based on URL aliases /irj/portal/individual or /irj/portal/business
    I will dynamically add an UME group to the already logged in user.
    <u>Filter :</u>
    If clicking on /irj/portal/individual I will store "group=individual" in the context, and add UME group individual, if clicking /irj/portal/business I will store "group=business" in the context, and add UME group business and remove individual, and then redirect to the same URL.
    <u>Configuration</u>
    Each UME group has a one-to-one mapping to a Portal role.
    I will place an ACL on the PCD content, based on group, hiding/showing aggregated folders, hanging under the roles.
    <u>Wanted end-result</u>
    Different links in the detailed navigation, based on URL alias.
    <b>My question is how you would implement the filter part, mentioned above ?</b>
    Portal app or J2EE servlet filter or something else ?

    Hi sunil,
       Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
    Regards,
    Harini S

  • How to disable automatic loading of iView/Page in detailed navigation?

    Hello,
    We've upgraded our portal 7.0 from SP9 to SP12.
    I've noticed that SAP have added this change: Whenever a user is navigating between one role/tab to another in the top level navigation the first folder at the detailed navigation is automatically opened and the first content there is automatically loaded.
    I would like to disable this option - I've looked at the new properties that have been added to the detailed navigation iView between SP9 and SP12 and could only find these two: Display Parent of Hidden Node and Open Folder When Launched.
    These two are not solving this problem and they are disabled anyway.
    Any ideas...?
    Roy

    Roy,
    Role and Workset Hierarchy:
    Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
    And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
    I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
    Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
    Hope this time it helps you.
    Thanks
    Mona

  • Can't find services in the Detailed Navigation when open from Overview page

    Hi,
    We have developed a custom area page for our ESS application. The area is visible in the Overview page as well as in TLN (Top leavel navigation). When we open the area from TLN the services under this area are visible in the Detailed Navigation(DN) on the left. But when we are trying to open the area from the overview page we can't be able to see the services in the DN and we have realized that the focus is on "Overview" in the TLN. In DN also only the Overview link is coming. But for other standard ESS applications the focus in the TLN is changing.
    Please help to find the solution.
    Thanks,
    Sekhar

    Hi Sekhar,
    Did you get any solution for this issue. I am facing the same situation.Please advise.
    Thanks,
    -Ashwani

  • How to put a web link in the detailed navigation

    How can you put a web link in the detailed navigation?
    I know that if your role contains iviews that are 3 levels down (default), then the link to the iview will appear in the detailed navigation. But, I want to put a link to a external site in the detailed navigation - is this possible?
    Thanks
    Patrick

    I have a page set with a url iview and it opens from the detailed navigation in a  new window fine.
    however when clicking on a link to the page via a landing page which displays the KM content page folders, it loads it in the portal active window still (with nav and masthead).
    Any ideas how to get the km link to open in a new browser window?
    thanks
    Message was edited by:
            Alex McKnight

  • Problem navigate  from the "detailed navigation"

    Hi ,
    I created a role that include workset.
    the pages of the workset are being  displayed in the "detailed navigation" area .
    when i navigate from "a" to "b" in the ""detailed navigation"...i have 2 problems :
    1. sometimes i see the portal logon page .
    2. it navigate back to the entry point of the first displayed role .
    Any ideas how to solve this problem ???
    Thanks Faniel.

    If your portal is abc.foo.bar.com:5000 and your iView tries to access content in abc:50000, then you might be prompted to logon again.
    Are the WD applications running on the same instance as the portal, or are they running on a different instance?
    What is the cookie lifteime?
    Cheers

  • Access the detailed navigation link using webdynpro

    Hi,
    I have a requirement where we have two different DC's of which one is a standard DC and the other one is custom DC with one application in each of them.My requirement is to navigate to the other application in the second DC directly on clik of a link or button from the current application.Also since these applications are displayed in detailed navigation i want to access the detailed navigation link location and activate the other Application instead of using WDPortalNaviagtion.
    The steps are:
    Development Component - DC1 - This is custom DC
    with application APP1
    Development Component -DC2 - This is standard
    with application APP2
    I have APP1 & APP2 in the detailed navigation.
    If i have a link or button in APP1 to navigate to APP2 i have to be able to activate the link on the detailed Navigation of APP2 to open up its content.

    Hi Swathi,
    Check the following threads:--
    Replace an iView dynamically by another one by portal navigating service
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1aa4d188-0e01-0010-2382-c5c65202c433
    http://help.sap.com/saphelp_nw04/helpdata/en/43/d1233b4c1d0a85e10000000a1553f6/frameset.htm
    Hope This Will Help
    Regards,
    Siddharth

  • Dynamically changing the detail navigation

    Hi all,
           can anyone please tell me how to change the detail navigation  dynamatically..
    Regards,
    Jeyasingh Samuel

    Hi Srinivasa,
    There are 2 things you can do:
    (1) You can simply set the invisible property for the iViews (I think this is what you want).
    You create a settings page which lists all the iViews, and when the user clicks a button, the page gets all the settings for all the iViews and sets the invisibility property for all of them.
    The invisibility property indicates whether to display this object in the TLN/DTN.
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY, IPcdContext.PCD_INITIAL_CONTEXT_FACTORY);
    env.put(Constants.REQUESTED_ASPECT, PcmConstants.ASPECT_SEMANTICS);
    env.put(Context.SECURITY_PRINCIPAL, request.getUser());
    env.put(IPcdContext.PCD_PERSONALIZATION_PRINCIPAL, request.getUser());
    iCtx = new InitialContext(env);
    //Create loop of all objects 
        String pageID = "portal_content/DanielContent/DanRole/Folder1/Folder2/Page1";
        IPage myPage = (IPage)iCtx.lookup(pageID);
        myPage.putAttribute(IAttriView.ATTRIBUTE_NAVINVISIBLE,"true");
        myPage.save();
    The above code is for a page, but you can do the same for an iView.
    (2) If you iViews are in a page, and do not appear in the navigation tree, but you want to make them invisible, you can set this property on the iViews.
    myIview.putAttribute(IAttriView.ATTRIBUTE_AVAILABILITY,IAttriViewValues.AVAILABILITY_VALUE_AVAILABLE);
    myIview.save();
    Either way, make sure to set the personalization environment variable when you do your PCD lookup, as shown above. Otherwise, the changes for one user will affect all users.
    Hope this helps.
    Daniel

  • Grey border of the detailed navigation node thickens

    Hi Experts,
    When an embedded or URL document library is used in a web page why is the grey border on the right hand side of the detailed navigation node thickened?
    Thanks in advance.

    Hi Vijay,
    you can created an url iview  and give the url property and also set the property to open in new window.
    Assign this a role. when u click the role it automatically open a new  window with the descried url iview.
    hope it helps you.
    Raghu

  • Fixing the detailed navigation view.

    Hi
    We all know that we can expand or shrink the detailed navigation view. Is there any way to make the detailed naviagtion view immovable I mean it should have fixed width and it cannot be expanded or shrinked.
    Thanks in advance
    Srikant

    Hi DV,
    We can remove the expansion and shrinking of the navigation panel by removing the navigation panel header, using the theme editor. U cannot remove it as such but u can reduce the size to a minimum so that it wont be visible at all.
    The detailed navigation panel is an iview. It can be found in PCD>>Portal Users>>Std Portal Users>>Default Frame work page>>Desktop inner page. There u cna see the detailed navigation panel and u can edit its properties over there.
    Hope this Helps
    gEorgE

Maybe you are looking for

  • Dunning letter based on Bill-to-party

    Hi, We have a custom smartform for Dunning letter which is a copy of a standard one.It is being triggered by BTE. We have an incoming structure 'mhnd' which is populated based on sold to party and picks up all the outstanding documents pertaining to

  • [JS- CS3] Before Export Set pdfExportPresets

    I am having trouble setting the pdfExportPreset with a script I am using to do things before the Export Dialog box shows up. I can set the pdfExportPreferences.pageRange with no problem. But can't get the pdfExportPresets to work. Var myPreSet = app.

  • Including image in xml

    hi all, Dont get angry for asking this silly question.I m new for XML. I have an image that is in jar file ,i want to display that image in an XML page. What problem occurs is when i run the jar file ,XML and XSL files created in C drive. But the ima

  • Migration to NW7.11

    Hi, Maybe you can help me. I am migration RWBS application based on WD for Java to NW7.11 and I am facing some copiling errors: For example: Code in NW7.0: import com.sap.tc.webdynpro.services.sal.datatransport.core.IInputMassDatasource; import com.s

  • Extracting from a Database: Postgres

    Hi, I know that Postgres isn't a certified database by SAP BI. This means that i won't be able to use DB CONNECT to extract data from a Postgres Database. I just want to confirm with you experts if this is case. If my assumption is correct, is there