Add line break in Configurator tool tip?

Just started using the Configurator, what a great idea.
My first attempts at tool tips often get lengthy. If the width of the panel is not wide enough, resulting tips get truncated/munged.
Is there a way to insert line breaks in tips so that they can be seen in total on a "skinny" panel? Or is there another approach?

almeck wrote:
Or is there another approach?
Keep them short!

Similar Messages

Very Simple: How do I programmatically add line breaks?

Very Simple: How do I programmatically add line breaks or how do I encapsulate my RichCommandLink's within a paragraph?
My Code is as follows:
for (String token : userViews.getViewNames())
// add command link
RichCommandLink output = new RichCommandLink();
output.setText(token);
// set action here
// output.setActionExpression());
viewItem.getChildren().add(output);
// update view
this.menuAccordion.getChildren().clear();
this.menuAccordion.getChildren().add(0, viewItem);
AdfFacesContext.getCurrentInstance().addPartialTarget(getMenuAccordion());

Sorry, I'm using Jdeveloper 11.
Im using JSP, JSF, ADF, Fusion. The RichCommandLink is an ADF Control.
My PanelAccordion is bound to a RichPanelAccordion in my java class. When I add RichCommandLink's to the accordion the items are added next to each other. How do I add line breaks from my java class?

Add line break in pdf

We have a form that users input
biliography information (name of book, pages, date published, etc) into a text area. they can input multiple articles at once in the text area. is there a way to intoduce a line break on the pdf in between each article? meaning can we tell the users to input something like a % in between articles and have then some how introduce a line break on the pdf for every %?

You can use the coldfusion replace function to replace any string with either an html break tag, or the appropriate chr functions, depending on how you are generating your line breaks. That's the easy part.
The first hard part is to get 100% of your users to do what you want 100% of the time.
The second part is to figure out the difference between a symbol, such as a percentage sign, that is supposed to indicate a line break as opposed to simply being part of the article.

Add line break in name of an interactive report computed field

I have a computed field in an IRR and need the name of this field to be broken into 2 lines. In regular columns I can add "br" right in the column attributes but if I use that in the computed field name, the HTML "br" actually shows up in the field name. How can I do this?

Here is a threa dealing with a nowrap issue for an IRR, try making the nowrap setting in the css a wrap and see what happens..
Re: Interactive Report - fields wrapping
Thank you,
Tony Miller
Webster, TX

How to add line breaks to output fixed width flat file

0
I need to create a Flat file without column headers, no comma separated values but each column will have a fixed starting position and a fixed length in the text file. For example, below is the text file to be created with six columns
Column1 Column2   Column3     Column4 Column5      Column6
abc          1             New emp      xxxx         xxxx
xxx
Fixed starting position and a fixed lenth values for these columns as are below;
Column1 : Starting Position -1, Fixed Length -4
Column2 : Starting Position - 8, Fixed Length - 2
Column3 : Starting Postion - 11, Fixed Length - 10
Column4 : Starting Position -1, Fixed Length -5
Column5 : Starting Position - 10, Fixed Length - 2
Column6 : Starting Postion - 15, Fixed Length - 5
The out put file each line have only 20 characters length.First 3 columns comes in first line and 4-6 columns comes in 2nd line.
OUTPUT FILE:
1234   89 11121314151617181920
12345    1011         151617181920

BOL says that:
The Fixed width with row delimiters option is not available in the Flat File Connection Manager Editor.
If necessary, you can emulate this option in the editor. To emulate this option, on the General page of the Flat File Connection Manager
Editor, for Format, select Ragged right. Then on the Advanced page
of the editor, add a new dummy column as the final column of data.
More details steps:
http://www.coderewind.com/2012/08/ssis-how-to-include-rowdelimiter-with-destination-flat-files/
Below blog should make things clear:
SSIS Flat File Export - "Fixed Width" vs "Ragged Right"
-Vaibhav Chaudhari

How to add line break to UILabel or to UITextView

How can I do it? \n is not working
Thank you

Aristarh wrote:
... in this case in debugger
looks thinner and paler.
I don't think the "thick" character you're seeing is a new line, '
' (0x0A). It might be a carriage return, '
' (0x0D), some other control char, or possibly the combination "
", which is seen on Windows systems.
How can I replace my usual
to thinner
1) Identify the unknown char(s);
2) Use a method such as [stringByReplacingOccurrencesOfString:withString:|http://developer.apple.com/ip hone/library/documentation/Cocoa/Reference/Foundation/Classes/NSStringClass/Reference/NSString.html#//appleref/occ/instm/NSString/stringByReplacingOccurrencesOfString:withString:] to insert '
' in place of each occurance of the char identified in step 1. E.g., if the char turns out to be a single carriage return:
myLabel.text = [stringFromParser stringByReplacingOccurrencesOfString:@"
" withString:@"
Some ways to do step 1:
Examine the raw xml;
Loop through a string (e.g. label.text) and print the numeric code point of each char with NSLog();
Format the output of gdb to print the code points (e.g. as hex). Here's a quick tutorial: [GDB Output Formats|http://www.delorie.com/gnu/docs/gdb/gdb_55.html].
Let us know if you need help interpreting the text obtained by any of these methods. For example, if the hex output from gdb doesn't make sense, just paste directly from your Console window into the forum so we can have a look at it.
- Ray

Multi line ballon tool tip

I have used ballon toolip, it have multiple lines to show the tool tip, but it is not working.
I have added Component in bolloon tool tip to show multi line text , but still not showing correctly.

aanu wrote:
But it not works fine.
Please suggest me the way .
THE WAY
1) Tell us what "not works fine" is supposed to mean.
2) Tell use what the hell balloon tip means. Where did you get this? How do you call it?
3) Post your code. USE FORMATTING TAGS. At least some code to give anyone a clue of what you are doing.
4) Next time post into the correct forum.
It never fails to amaze me when asked for more useful details people respond as you did here. By repeating, ad nauseum, information that was already clear but doesn't actually tell anything. Yes. We got that "it" only displays one line. But you didn't answer any of the questions asked which relate to what the hell is "it" and how the hell are you calling "it". etc.

Bridge CS6 tool tips are blocking the buttons!

When I try to change the layout view (grid, list, etc.) with the buttons on the bottom right, the tool tips appear and I'm not able to click through them. So, basically, when I hover over them, the tool tips are blocking me from doing it.
I look in Prefs for a Tool Tips checkbox and it's not checked right now, but they're still appearing, and still protecting the buttons from being clicked.
Anyone know how to turn them off?
And I have to say this is the most ridiculous problem I ever had with a program. Kinda funny.

I still don't think it's the right checkbox to deactivate interface tool tips as it's in the "Thumbnails" sections of prefs. (And when I switch that on I get tool tips for thumbnails, when I switch it off I do not get tool tips for thumbnails. But the interface tool tips are always consistent.)
Well, I'm again afraid. But this time for my big mouth...
You are very right, I did have a long delay on my machine before the tooltips showed and having the checkbox set to on it seemed directly appearing.
As there are many inconsistencies in Bridge (in fact throughout the whole Suite) this one is very big. Don't have a good alternative short name for it but calling 'show metadata when hovering over' 'show tooltips' is really a very bad approach
The version is CS6 and I'm on a 2009 Mac Pro using 10.6.8 if that matters any.
Thanks, it always matters, especially since this has become a general forum with both Windows and Mac. Different OS and different versions (including detail version number) gives more insight in possible solutions or advice (update etc)
Also, I noticed that if I make Bridge CS6 smaller than the monitor window, then the tool tips over the buttons do not appear over the buttons anymore, but under them instead. The tool tips seem to be set to appear below the mouse pointer. When Bridge is maximized and the bottom of the Bridge window touches the bottom of the monitor there is no place else for the tool tips to go, so they get pushed up... and cover the buttons.
I always have the Dock in sight hence pressing the green button to enlarge my Bridge window to full screen leaves a small free space and as you well discovered has not your problematic behavior with tooltips over buttons.
I would think Bridge should be able to detect the end of the screen, obviously it does because it knows to move the tool tips up so they don't appear "off screen".
They should use this detection to determine if the tool tips should appear above or below (or away from the screen edge) the mouse pointer.
Agreed
I'll stop calling it a bug and switch it to "oversight". Bottom line though is the tool tips still block the buttons and shield them from being clicked.
Oversight is the correct word, but besides the above described improvement they really should get rid of the name tooltips in thumbnails and add an option to really hide or show all tooltips as you would expect in a proper application
Thanks for staying tuned and clarify!
While the Bridge team tries to read most of this forum it might be wise to make a feature request for this, are you willing to do so since this is your discovery?

How to use long texts in explanation tool tip?

Hi ,
Can anyone tell me how to add long text in Explanation tool tip?
I am able to use short OTR texts in explanation tool tip but not able to use long OTR texts.
Thanks and regards,
Vivek Shetty.

For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10

Adding line breaks in email messages created by forms

I've used ADDT to create a feedback form, pulling through data from a databse.
It generates the code :
//WriteContent method
$emailObj->setContent("First name : {firstname}Last name : {lastname}Tel : {tel}Email : {email}Comments : {comments}Preferred method of contact : {prefer}");
How can I add line breaks in the email message? I've tried
tags, but no joy.
Cheers.

I presume you said slash n there - that was it. Cheers.

How can I insert line breaks?

In Pages for iPad the arrow that I used to use, which contained line breaks in its drop down box, has disappeared. How can I add line breaks now? Or where has it gone?

I know this is a really small indent example but if you look to the right of "realm of" on the bottom of the 'top right' page there is space where the text in that line is no longer justified. By the way, in these circumstances, I have to click on insert page break twice - the first click does nothing.

Missing line breaks with Excel

Hello,
Am downloading certain into Excel using BSP. I am changing response mime type to "application/vnd.ms-excel" and am sending tab-demilited string as data.
Some of the columns should contain line break within the cell( Mean the Alt-Enter in Excel cell ). I tried using the character code 10 and also 13 for the break. But it did not work.
How do I cause a line-break in the Excel cell? Any work-arounds??
Thanks.
Srinivas.

Hi Srinivas,
I think you don't have the possibility to add line breaks into a tab seperated file. You rearly had to create an excel file. Unfortenately AFAIK this is not possible in ABAP. I've done this in PHP using the <a href="http://pear.php.net/package/Spreadsheet_Excel_Writer">Spreadsheet_Excel_Writer</a>.
Regards
Gregor

Closed captioning line break

Is there a way to add line breaks to the closed captioning within Captivate? I've been copying and pasting my text from Word and adding the line breaks there. But sometimes you just need a line break right way and don't want to use Word.

Yes. Open the Slide Properties for the slide containing the CC you wish to edit, then click on the Audio Tab. Now, Click on the Closed Captions button and a new dialog box will open containing your CC text. This is where you can control timing of your Closed Captions as well.
Hope this helps!
randy

Spry Tool Tip Error

Hi there, I'm really interested in getting the SPRY tool tips
working. I have a page that uses them on all my images. The first
line of tool tips work. The second doesn't follow the mouse
completely and on the last line of images the tool tip appears half
way up the page. Anyone work out why?
The page is:
http://www.hforhome.co.uk/development/tool-tip-deleteme.html
Thanks in advanced for any help.
DWS
The
page in question

I've just noticed that the tool tip doesn't go lower than
lowest part of the initial browser height. Weird. This seems to be
a Firefox problem. I'm only able to test on Firefox3 and Safari.
Can anyone let me know it works in IE?
Thanks
DWS

Tool Tip for a screen field.

Hi,
I have a step loop defined in a screen. I want to show tool tip for the each column. Please let me know how can i do it?
I would really appreciate it.
Regards,
Sanjeev

hi,
&#56256;&#56452; If the meaning of a button cannot be perceived because of short or abbreviated label texts, a detailed description should be available in a tool tip.
To insert a tool tip, proceed as follows: In the Screen Painter element list, choose the General Attributes tab and the Property List column; or the Properties pushbutton in the Layout display on the Attributes window. Insert the TooltipText property to assign a tool tip. This function is only avail-able with R/3 Enterprise or Basis SP 44 (Release 4.6C) and higher.
&#56256;&#56452; Always provide a tool tip on icon-based buttons.
&#56256;&#56452; If a button contains both a text label and an icon, the button must have a tool tip that in-cludes the text description of the meaning of the icon. If the label text and the icon both convey the same information, no tool tip is required if the text is recognized by assistive technology.
&#56256;&#56452; If a keyboard shortcut (e.g. Ctrl+F3) is available, add this information to the tool tip text.
&#56256;&#56452; If a button handles the Enter keystroke, the buttons tool tip should provide this Default Button information.
&#56256;&#56452; Recommendation: Important buttons provide an optional icon and a mandatory caption text. Align important buttons in the order in which they are read: in Western countries, the most important buttons are aligned left. Standard buttons (such as Save, Back, Search, Next Object, or Previous Object) should not have an additional caption text.
Also chk this link:
http://www.sapdesignguild.org/resources/Accessibility_Guideline_ABAP_external_Version.pdf
regards,
keerthi

Add line break in Configurator tool tip?

Similar Messages

Maybe you are looking for