Add logfile group without shutting down first? (10g R2)

Can I add a logfile group without first shutting down the instance? I don't see any clear statement about this in my Alapati 10g Admin book or any Oracle 10g R2 docs. Citations appreciated. Maybe this is one of those "too obvious to publish" things. My guess is that Oracle 10g R2 is smart enough to know not to write to new logfile group members until it is fully created and available for use.
Thanks.

Hello,
Is the presumption that any "ALTER DATABASE" operation can be done online in 10g? Not Any, but Some, Yes.
For instance, the ALTER DATABASE ARCHIVELOG statement cannot be done online ( the Database should be mount ).
However about the ALTER DATABASE ADD LOGFILE statement, as previously posted, it can be done online. I've already done it on a running Production Database.
Just be careful to set the same SIZE as for the other Logfile Members.
Hope this help.
Best regards,
Jean-Valentin

Similar Messages

Kernel-Power Event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
   [ Name] Microsoft-Windows-Kernel-Power
   [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   EventID 41
   Version 2
   Level 1
   Task 63
   Opcode 0
   Keywords 0x8000000000000002
- TimeCreated
   [ SystemTime] 2012-02-01T00:02:48.677610900Z
   EventRecordID 8270
   Correlation
- Execution
   [ ProcessID] 4
   [ ThreadID] 8
   Channel System
   Computer LR8K6TLC.cntr.thrivent.corp
- Security
   [ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.

We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots.   I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you.

The system has rebooted without cleanly shutting down first. How to clear this error. Occurs frequently.

Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 31-12-2014 14:35:18
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: BLISS-ORACLE
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-12-31T09:05:18.479605300Z" />
<EventRecordID>9113</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>BLISS-ORACLE</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>

Hi,
I agree with Mr X. This should be a BSOD issue. Did you refer to Mr X’s suggestions and solve this issue?
Just addition, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
and check if can help you.
Crash dump analysis using the Windows debuggers (WinDbg)
How to read the small memory dump file that is created by Windows if a crash occurs
By the way, it may be not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is it possible to take a full backup without shutting down an instance?(10g

Hi. everyone.
Is it possible to take a full backup without shutting down an instance?
The db version is 10gr2.
As far as I know, in order to take a full backup of a database,
one need to shutdown a database.
Our db environment is a RAC environment which has two nodes.
Yesterday, I heard from a hardware vendor that we do not need to shutdown
instances(2-nodes) in order to take a full backup.
Best Regards.

Hi,
>>As far as I know, in order to take a full backup of a database, one need to shutdown a database.
In fact, a database operating in NOARCHIVELOG mode is necessary to shutdown the database in order to perform a full backup (Cold Backup), but otherwise a database that is operating in ARCHIVELOG mode, then is possible to perform a full database backup with the database in a open state. (Hot Backup)
For more information see if these links below can help you:
Oracle Backup and Recovery
http://www.oracle.com/technology/deploy/availability/htdocs/BR_Overview.htm
Oracle Backup and Recovery FAQ
http://orafaq.com/faqdbabr.htm
Cheers

Cloning without shutting down the db

Hi,
Can you please suggest how to clone apps and db without shutting down the database? Apps is just copying the files, is there a recommended way to do the db cloning without shutting down the db.
Updating the instance details:
db - 10.2.0.4 on RHEL
apps - 11.5.10.2
-Jek
Edited by: 890397 on Feb 2, 2012 5:31 AM

You can find all the steps in the documentation (using RMAN or Hot backup).
Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database [ID 760772.1]
Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1]
Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Rapid+AND+Clone+AND+Documentation&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Rapid+AND+Clone+AND+RMAN&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Shut off screen without shutting down accelerometer in Touch

Due to Apple firmware limitations in the 2G iPod Touch, it is not possible to shut down the Touch screen and keep the accelerometer running, so running the Sleep Cycle application on the iPod Touch causes the screen to stay on all night and become very warm
Apple please please could you change the Touch firmware to support shutting off the screen without shutting down the accelerometer so that Sleep Cycle can be run on the Touch like it now runs on the 3G and 3GS iPhone.
This would open this excellent little application to the whole Touch market segment, making the developers very happy and allowing me to get up in the morning.

This is a user to user forum and Apple will not hear you. You can address Apple directly here: http://www.apple.com/feedback/ipodtouch.html

Can we put RAC database in Archivelog mode without shutting down

All,
Can we put RAC database in Archivelog mode without shutting down.
Currently our new production database (2 node RAC) is in no archive log mode, Need to enable archive log in the database...
I believe we need to set the cluster_database=false and then put the DB in archive log mode then we need to bounce the database to take effect...
Just curious to know in 11gR2 ...Can we put the RAC database in archive log mode without any downtime ...?

Even RAC or non-RAC, database should bounced and enable/disable archive log mode from mount status.

Tuxedo transaction branch in GMTREADY and cannot finishit without shutting down weblogic server

Trying to reproduce a problem in an application we are deployed a servlet in a
weblogic 8.1 sp2 server, doing the folowing:
1. Begin a transaction
2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
4. Before commit the transaction in the servlet, we shutdown tuxedo gateway "B"
5. After commit transaction branch via gateway "A" remains indefinitely in GMTREADY
state, while transaction branch via gateway "B" gets GMTABRTONLY after timming
out.
After commit(that fail doing rollback), transaction is not reported like inflight
in weblogic server. We cannot finish transaction branch in GMTREADY state. Only
after shutdown weblogic server, and after an undetermined time(sometimes a lot)
transaction branch is rolled back.
While transaccion is not rolled back, all locks in DB remains active.
How we could finnish that branch without shutting down weblogic server, or, if
not, how we could control the time in witch transaction is rolled back?

We open a case with BEA eSupport and the servlet problem was a bug. Engineering
got a
temporary patch that seems to solve the problem. The case continues trying to
solve our original problem (the servlet was to reproduce the situation).
Thank you very much.
Jose Emilio Ortega.
"Todd Little" <[email protected]> wrote:
>
Hi Jose,
Can you provide a little more information. In particular, what are the
JTA timeout
values configured for your WLS application? Did you set the interoperate
setting
to Yes under the WTC local access point's connection settings? When
you begin
the transaction in the servlet, do you specify a timeout value and if
not, do
you know what your thread's default transaction timeout value is?
If possible, can you post or e-mail your WLS's config.xml and the domain
configuration
files for the two Tuxedo domains (not the UBB files, although those would
be helpful
as well.)
Thanks,
Todd
"Jose Emilio Ortega" <[email protected]> wrote:
Trying to reproduce a problem in an application we are deployed a servlet
in a
weblogic 8.1 sp2 server, doing the folowing:
1. Begin a transaction
2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
4. Before commit the transaction in the servlet, we shutdown tuxedo
gateway "B"
5. After commit transaction branch via gateway "A" remains indefinitely
in GMTREADY
state, while transaction branch via gateway "B" gets GMTABRTONLY after
timming
out.
After commit(that fail doing rollback), transaction is not reportedlike
inflight
in weblogic server. We cannot finish transaction branch in GMTREADYstate.
Only
after shutdown weblogic server, and after an undetermined time(sometimes
a lot)
transaction branch is rolled back.
While transaccion is not rolled back, all locks in DB remains active.
How we could finnish that branch without shutting down weblogic server,
or, if
not, how we could control the time in witch transaction is rolled back?

SAP System copy without shutting down the source and the target system

Hi,
We need to need to System refresh without shutting down both the source and the target system, i read the docs from SAP looks like we need to shutdown the source system during export and import phase, is there any way to do the system refresh without shutting down the system.
Sathish

Hi,
Think a little bit about what is a database and you'll get the answer that what you "need to need" is impossible.
Of course it is possible to keep the source running (hopefully, because ususally it is the production system !) by using an online backup, but you need to stop the target system because you will restore a backup on it.
If you use the export/import way, you have to stop both source and target system.
Regards,
Olivier

Is it possible to kill a (last) task without shut down the hole App?

Is it possible to kill a (last) task without shut down the hole App?
For example you wanna open/import something in Adobe AE and the finderdialog hangs.
You dont have any chance to save your work before quit the app.
May it could be a code in Terminal or something like else.
So, is it possible to whrite it down for me please?
thx frank

You can kill any individual process by using Activity Monitor, selecting the process, and using the Kill Process command. The location and precise phrasing of the command will vary by version of OS X; in Mavericks it's the "x" button at the upper-left corner of the screen.
If it's some part of the application that has hung, though, it's highly probable that killing a process associated with the application will bring down the entire program. In such as case there's almost never any option. In the case of the application hanging in the file open/save dialog, then I don't believe that there will be any way you can recover without forcing the entire application to quit.
Regards.

Changing archive log mode without shutting down database

Hi all,
Is there any way to set the database to archive log mode before shutting down the database and when the database shuts and starts, the database should be automatically in archive log mode?
because we can not shutdown the database in weekdays and we have system reboot on weekend and we are not here on that day. So is there a way to set the database in archive log at the memory level so that when the database reboots, it should automatically start in archive log mode.
my environment is windows server 2008 R2 with oracle 11.2.0.3
Thanks in advance.
Edited by: 931643 on Dec 5, 2012 10:37 AM

931643 wrote:
thank you for the reply Max Seleznev,
First I thought of writing script in order to include in that process. But we can not run any commands in the sqlplus using the windows jobs. for eg:
you can write a batch file as below:
cd \
sqlplus / as sysdba
select name,open_mode from v$database;
when you run this, it will open until sqlplus prompt but then will not execute the query.
What did you expect? Well, actually, I know what you expected. But think about it for a second. You have a batch file with the mentioned three lines. How does that batch file get processed .. what is happening when it is being processed?
It is not being processed by sqlplus, it is being processed by the windows command processor. Just like the cmd.exe. Each line is read by the command processor and executed accordingly. So ....
cd \the command processor calls 'cd' , and passes the value '\' to do with as it sees fit. 'cd' then changes the current directory of the session to whatever is indicated by the passed parameter. in this case, that value is '\' , so the resulting current directory is the base (root, in *nix terms) of the current drive. When 'cd' has finished, it returns control to the command processor, who then reads the next line ....
sqlplus / as sysdbathe command processor calls sqlplus.exe and passes it the command line parms '/ as sysdba' to do with as it (sqlplus) sees fit. sqlplus does whatever it does with what it has been given In this case it tries to connect to whatever local database is indicated by the value of ORACLE_SID, then waits for more input. Whenever sqlplus exits (how does it know to exit?) it returns control to the command processor, who then reads the next line ....
select name,open_mode from v$database;The command processor will read this line and attempt to find an executable file named 'select' and pass it the rest of the command line 'name,open_mode from v$database;'
Hmm, what do you suppose will happen with that operation?
that is the reason I am figuring out whether there is an alternate way.yes but you have to use the proper technique. And since you are building this into a production stop/start without testing the actual stop/start commands ... what do you suppose will be the outcome if something goes wrong?
After hours and weekend work is one reason DBA's make more money than developers.
>
Thanks

Does connecting a display to DVI without shutting down really cause an arc?

I just got a Wacom Cintiq 12" and their documentation and tech person says I've got to shut down before plugging or unplugging or beware--making the DVI connection with the computer on (or even asleep) could cause an arc and damage the display. I told them Apple support told me the exact opposite a while back, that I should be plugging and unplugging montors while my Powerbook was awake so the computer properly recognizes it. Wacom tech support says they were surprised to hear Apple actually recommending this since that it's dangerous to all displays.
Anyone know the straight scoop on this? I'd hate to have to restart every time. Thanks!

I don't think there really is a straight scoop. Zillions of people plug and unplug monitors every day with no ill effects. However, there is a slight possibility of a problem, which is probably why Wacom specifically warns not to do this. FWIW, my display is a Viewsonic and it, too, specifically warns to have both off before connecting, then specifically to power the display on first, then the computer (to recognize the display).
I think the manufacturers have covered themselves by stating this, so I suggest if you want warranty coverage, you should follow this. Do I do this every time? No!

My I phone 3gs shuts down suddenlly but when i removed the sim it is working without shutting down suddenlly again when you insert the sim it started shutting down suddenlly

My I phone 3gs shuts down suddelly but when I removed sim card it started working without sudden shut downs, again when I insert sim card it started shutting down suddenlly.

I have Satellite A300 and until now everything works OK.
I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
If not let OS run and put the battery.
Is the battery recognized properly? Does notebook switch off again?
To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
Full diagnosis?
And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

TS3623 apple tv can't get through one song without shutting down

why does apple tv shut down during the first song from my ipod

Airplay to AppleTV 2 or 3?
What format was the song in?

Can't open Elements 8 more than once without shutting down the computer

After starting up my computer, I can open Elements 8 (organizer and/or editor) and work as usual. However, if I close the program, then check email or work on something else, and then I decide to open Elements again, I get the opening screen, click Organizer, and it just disappears. When I shut down the computer, it says there are programs waiting to close, but it shuts down quickly despite that. Once I have restarted, all is normal again, until I decide to open Elements twice.
I have Windows 7 professional.
Do I need to reinstall Elements 8?
Cam

It sounds like the Organizer and Editor aren't closing all the way, which makes it so you can't re-open them.
To know for sure if this is the case, after you close either program, open Task Manager (CTRL+SHIFT+ESC), go the Processes tab, click the option at the bottom to show processes from all users, and then scan the list for PhotoshopElementsEditor.exe and/or PhotoshopElementsOrganizer.exe.
If there, then that means they aren't getting closed.
As a temporary workaround until you find out why they won't close, you can end the process in Task Manager instead of rebooting the computer.
As for the cause, it is possible that something else you have running in the background, perhaps security software, is causing the issue. To determine if that's the case, restart the computer without any startup items or non-essential services, and then run Elements 8. Here are some instructions:
Windows 7/Vista: http://go.adobe.com/kb/ts_kb404913_en-us
Windows XP: http://go.adobe.com/kb/ts_kb404984_en-us
If you can close and re-open the Editor/Organizer properly without anything else running, then something was preventing the program from closing properly. Use a process of elimination to determine what; something similar to this method:
Open the System Configuration utility.
Re-enable approximately half of the items that were disabled.
Click OK, and restart your computer for the changes to take effect.
Check if you can close and re-open the Editor/Organizer.
If you can't anymore, open the System Configuration utility and disable half of the most recently enabled items.
If you can still, open the System Configuration utility and re-enable half of the remaining items.
Go back to Step 3, and continue dividing the items into halves until you have determined which startup item or service is causing the issue.
Once you have isolated the problematic startup item or service, contact its manufacturer for an update or configuration information, or leave it disabled.
HTH

Add logfile group without shutting down first? (10g R2)

Similar Messages

Maybe you are looking for