Add master data during transaction load

While loading a oDS can I add new entries into master data infoobject.
I don't want to update master data. I need to add new master data along with its attributes.
Like a new material is found in invoice that's not in material-master.
Using the invoice I want to add the material into material master

Hi Rohini,
Here is the link -->
http://service.sap/com/bi -->services & implementation --> how to guides --> guide list SAP BW 2.x --> How to... update Master Data during upload of transact. data
Cheers,
Sree

Similar Messages

  • Impact on transactional Loads if Master data is not loaded

    Scenario for your reference:
    The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21. 
    I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
    If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
    And how can i find out the impact and correct the transaction data if it does?
    Can any 1 help me with this?

    Hi,
    If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
    In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
    So, first load the master data and run the attrib change run process.
    After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
    If delta loads are there, you might need to performa  full repair.
    Regards,
    Rahul

  • How To... Update Master Data during upload of transaction data

    Can anybody let me know how this can be achieved.
    I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
    I dont want separate datasources.
    The datasource is actually transactional datasource.
    I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
    I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
    How To... Update Master Data during upload of transaction data
    Thanks.

    Dear Praveen
    I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
    In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
    I got the below link which may be helpful
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8

  • What happens internally while loading master data and transaction?

    hello,
    What happens internally and which tables are used while loading master data and transaction?
    I have loaded the data in DSO, but i am not getting value of particular InfoObject after loading the data.
    I have executed Attribute change run also.
    Kindly explain ...
    Thanks,
    Sonu

    Hi,
    Master data,
    Material Indipendent data can be sent without any dependency.
    Material Dependent data sequence is as follow.
    Plant,
    MRP areas,
    Supply area,
    Material,
    MRP area material,
    planning material,
    ATP check,
    Purchase info recards,
    schedule agg,
    PPM or PDS (But before PPM or PDS  work center should send to apo) If PDS is sending then BOM should send before PDS.
    Transaction data.
    As per the business requirement what is planning in apo.
    Regards,
    Kishore Reddy.

  • Why we load Master data first before loading Transaction data

    Hi Experts,
    why we load Master data first before loading Transaction data, specify any reasons for that ? Is it mandatory to load MD first ?
    I will allocate points to those who help me in detail. My advance thanks who respond to my query.
    Edited by: Nagireddy Pothireddy on Mar 10, 2008 8:17 AM

    Hi Nagireddy,
    I hope this helps....
    The bottom line for building cubes it to view facts against dimensions. When i say facts these are the key-figures i.e sales volume, Sales vat etc against some characteristics like sales Area,  Cost center , plant.
    Basically charateristics are those against which key-figures are measures like Costcenter, plant, material etc.
         Dimensions are a grouping of related characteristic. So basically a cube has a central fact table with dimesions associated to it in a relational schema. Imagine now you want to view a key figure Sales Volume against a dimension plant. when you consider plant , it has a distribution channel, purchasing organisation , company code, sales area, region etc associated with it. So which form the attributes of plant and also have some or the other description (texts) and aslo hierarchy. first we load the master data and then the transaction data follows.

  • Master data from transaction data

    Hi All,
    I am getting data from R/3. I am also getting data from another web based application which takes its basic master data from R/3.
    Now from the transaction data from the web based application(coming to BW as flat file), I am getting a field Material Class ID which desnot exist in R/3. Can I get the data of this field as master data in BW and that too as mapped to the Material from R/3.
    That is to say: can I get the Material Class ID data as master data in relation to Material from R/3?
    If anyone has any idea regarding this, please help me. Thanks in advance.
    Regards,
    Vinay

    Not sure i understand you properly..but,
    If Material and Material Class ID has the same 'meaning' then with conversions or without conversions.. you can store in the same 'material'.
    But if they are differed and you have got a reference data availble you can create a attribute as mentioned and map material and material class id. So
    1) Create only Material Class ID and LOAD this master data first from flat file.
    2) Enhance the material master data to add this as new attribute.
    3) Load the material master data and while loading fetch the material class id in the routine with the reference rules..
    Regards,
    Hari

  • Master Data and Transaction Data For DB Connect extracted Data...

    Dear Experts,
    I have been working on SAP NetWeaver BW 7.3 and for the first time I have extracted data from Oracle DBMS by using DB Connect. I have successfully extracted data of a View namely Sales_View into BW by creating a DataSource. This View has about 100 fields and I have been told that this view consists of Master Data and Transaction Data too. For my further reporting needs say building a Dashboard or InfoSpace I have to design a DSO and InfoCube for this DataSource. I'm bit confused about the Master Data and Transaction Data of this DataSource.
    1. Should I create all custom InfoObject against all fields of DataSource for DSO and InfoCube design?
    2. Do I need to create and load the Master Data for all InfoObjects or I need to create or load the Master Data for only those InfoOjects which will be   
         used for drill down or reporting in Dashboard or InfoSpace?
    3. Do I need to load the Master Data manually by creating Flat Files and using these files for Master Data loading for required objects?
    4. How should I approach the designing of DSO and InfoCube?
    I will appreciate your inputs in this matter.
    Many thanks!
    Tariq Ashraf

    Thanks!

  • Master Data before Transaction Data

    Hi Experts,
    I just like to confirm, is it neccassary to load master  data before transaction data? and can we skip the Master Data?
    Like if i have to load data from DS 2LIS_11_VAHDR, before that do i have to load all the corresponding master data for that DS in advance?
    Thanks......

    Hey AHP,
    Can i skip master data? i mean without loading any master data, could transaction data works fine?
    May be its confusing, just guide me, if i have to load the basic sales order fields to infocube, what type of Master data i have to load? i would really aprreciate if you will explain me by some example, if possible.
    Please any suggestion or ideas are also welcome....
    Thanks in Advance
    Message was edited by: BI Project

  • Difference between master data and transactional data

    Hi experts i have just started learning BW can u plz let me know the difference between Master data and Transactional data in bw ? and why is master data is first loaded before the transactional data ? thanks .....

    Hi
    Transaction data represents any transaction occured between two parties like Customer and Vendor.
    We maintain id's to maintain the Customer and Vendor.
    When we look at the id we don't have a clue like who is the customer, where does he live,,....
    So all this info is maintained in Master data in three categories:
    1. Attributes
    2. Text
    3. Hierarchies.
    Collection of Attribute, Texts and Hierarchies is called master Data in BI/BW.
    Eg: 0MATERIAL, 0CUSTOMER,,,,,
    Master data: is data that remains unchanged over a long period of time. Master data contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/58/a4513ce4af0a40e10000000a114084/frameset.htm
    Master Data is one form of the historical data. There is no frequent changes in the data.Every application has it's own Master Data.
    In BI the master Data has been divided into
    Characterstics
    Texts
    Hierarchies
    We can load Master Data through different ways.
    Pls. find the below link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/58/a4513ce4af0a40e10000000a114084/frameset.htm
    hope it helps u
    regards
    gaurav

  • Diff B/W master data and transaction data

    Hi all,
    What is the main Diff B/W master data and transaction data.  give me some example ?
    Thanks in Advance
    Krish...

    hi krish,
    MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
    Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
    Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
    As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
    In a word: in order to save costs and ensure your company’s success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
    TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
    Regards,
    GNK.

  • Downloding the SAP master data and transaction data to a flat file

    Hello All,
    Is there any SAP standard method or transaction to download the SAP master data and transaction data to flat file.
    With out using ABAP development, SAP had provided any tool or method to download the SAP system master and transaction data to flat file.
    Thanks,
    Feroz.

    hi
    as of now up to my knowledge no.

  • What are the settings master data and transaction data from r/3 to in APO.

    Hi all,
    Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
    frm
    babu

    Hi
    The data get transfered from R3 to APO via CIF which is SAP standard.
    Please find enclosed herewith the link which will provide you detail information regarding it.
    http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
    Please let us know if it helps you. Please also let us know if you have any more specific question.
    Thanks
    Amol

  • How to set default date of 3 weeks(21 days) from today's date during page load?

    I want to show the default date as 3 weeks from today's date during page load.
    For example ,i have given as adf.CurrentDate + 21 in EO for the attribute 'DueDate'. But it is showing me the date as 9.7.2013. 3 weeks default date is not getting set.If i give adf.currentDate also ,it not giving me today's date,it showing the 9.7.2013 only.Kindly provide your suggestions to set the default date as 3 weeks from today's date during page load.Thanks in advance.

    Hi,
    when you set the value on the entity level then you don't want to show it during page load but when the field is empty ? Correct? if so then the use case is a different one. The easiest way to implement this would be to create a Rowimpl class (Java option) and then in the get method of the entity attribute check if the value is null and if it is, set it to the current date + 21 days. This way all rows will be set with the 3 weeks due date but fields are not overridden each time the row is queried
    Frank

  • What is the Sequence of Master data and Transaction data R/3 to APO

    Hi guys,
    What is the Sequence of Master data and Transaction data R/3 to APO  through CIF?

    Hi,
    Master data,
    Material Indipendent data can be sent without any dependency.
    Material Dependent data sequence is as follow.
    Plant,
    MRP areas,
    Supply area,
    Material,
    MRP area material,
    planning material,
    ATP check,
    Purchase info recards,
    schedule agg,
    PPM or PDS (But before PPM or PDS  work center should send to apo) If PDS is sending then BOM should send before PDS.
    Transaction data.
    As per the business requirement what is planning in apo.
    Regards,
    Kishore Reddy.

  • Missing some master data for delta load( its very urgent please)

    Hi,
    I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
    the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
    Address Number/     Addr Ln 1 Txt/     City Dstrct Nm
    9025750333/                      #/               #     
    help me its very urgent

    Hi Sumanth,
    check the delta queue and the V3 job is it running correctly ,
    Have a look at OSS note :728687
    and also see the following thread
    Deltas are not available in Delta que
    Delta Queues are not cleared in R/3
    No data in RSA7 for 2lis_03_bf : HELP
    check the data may b it is in modifide status not active.
    regards,
    supriya

Maybe you are looking for

  • Cannot copy external hard disk as its asking for permissions

    Not sure why my settings have changed, but now every time I copy data onto my external drive main directory it asks for my password. I checked and seems that my current user is read and write setting (prssing command i.) I also notice that on a few f

  • BT email times out far too fast

    (Please answer by email, not by phone.) When I am logged in to BT Email, the email page shuts down in a minute or two and I must re-open it. Why is this? Earlier today the BT Email kept on dropping while I was typing a message. Please allow the BT Em

  • How do I get lost data back, after update  sync all pictures, notes and mail lost

    How do you get pictures, notes contacts and mail back, lost after update on IPhone5

  • Actual Activity Price Layout (KBK6)

    Hi Masters: I have the follow situation: FI currency = XX (company Code) CO currency = YY (Controlling Area) I want to define the actual activity prices using tx KBK6, but it's present a layout with a CO currency. I need to change this, because the u

  • ACS UCP Issue

    I have ACS , IIS & UCP installed on same Windows 2003 server. UCP was installed recently. IIS configuration was done before UCP installation. After installation I tried to access UCP via the URL http://localhost/secure/login.htm I get the login promp