Add matnr in fgi02 as an characteristic

hi is there any way to add matnr in the characteristics field of report painter fgi2

Hi
As far as I know, these reports are based on FAGL tables, which dont update MATNR in themselves
You can raise an OSS message to SAP and check if they can provide this solution
br, Ajay M

Similar Messages

  • Add MATNR to 0FI_GL_4

    Hi Experts,
    We are trying to modify the 0FI_GL_4 extractor to pull in Material Number information.
    We understand that in this case MATNR field should be appended through CI_BSIS after reading some of the posts.
    We tried following approach,
    1. Create CI_BSIS
    2. Add 'MATNR' same as BSEG-MATNR
    3. Activate CI_BSIS
    4. Activate DTFIGL_4
    5. Activate Datasource through RSA6
    However when we execute RSA3, MATNR is not populated.(we have checked BSEG and there are values against MATNR)
    Request your guidance for any missing steps in this case.
    Thanks,
    Gaurav

    1. The name for the fields in CI_BSIK needs to be exactly the same as in BSEG, i.e MATNR needs to be named MATNR not ZZMATNR as normal practice would require, because in the extractor evalutes field names for selection.
    2. You need to un-check the flags for 'Hidden' AND the flag for 'Known in own exit' in for the new MATNR field in the datasource 0FI_GL_4 (RSA6).
    That should do it
    Regards,
    Ola

  • How to add attributes to a DATS type characteristic

    I need to add some attiributes to a 0CALDAY type of characteristic.  I need to be able to do automatic time conversion in my transformations (e.g. from Cal Day to Cal Month or Cal Year).  I also need to have intelligent variable offsets in my queries too (e.g. the month of January-01 with a negative offset of 1 would be 12, not 00). 
    However I need to add some attributes to this Calendar Day characteristic such as "day of the week", "Week Number", etc...
    I need this as attributes and not as seperate InfoObjects such as 0CALDAY, 0CALMON, AND 0CALYEAR.  I need to be able to use the same date throughout my entire report, but then using the nav attributes, restrict based on what they selected in the variable screen.

    Hi Adam,
    It is not possible to define your own time characteristics or add attributes to any time characteristic.
    Time characteristics form the time reference frame for many data analyses and evaluations. They are delivered with Business Content.
    Examples:
    -->Timecharacteristic with the largest granularity: Calendar Day
    (0CALDAY)
    -->Time characteristic with the smallest granularity: Calendar Year
    (0CALYEAR) or Fiscal Year (0FISCYEAR).
    -Vikram

  • Add new partner function as a characteristic in structure PAPARTNER

    Hello experts,
    I have create 2 new partner functions (Z) in SD and have assinged in customer master. I need these 2 custom partner functions to be transfered to CO-PA during billing. I have followed OSS Notes 12682, 36557 and 36406.
    I Have define 2 new domain/data elements in the new partner functions (ZFPZ1 and ZFPZ3) and have assign it in structure MCPARTUSR to the new partner fields (PPARTZ1 and PPARTZ3).
    However when trying to add this new fields to the profitability analysis data structures using transaction KEA0, from the structure PAPARTNER, the new partner fields do not appear.
    Can anyone tell me what is missing?
    Best regards,
    HP.

    HI,
    normally it should work fine if you followed SAPNET note 36557 + corresponding. If it is freight cost where the problem occurs, see SAPNET note 411032. See also 93658, maybe thats helpful.
    Best regards, Christian

  • How to add leading zeros to a characteristic in CT04

    The business is requesting that we change a class characteristic so that it adds leading zeros.  Currently the characteristic is set as numeric with length of 6, no decimals.  Is there any way via template or otherwise to force this characteristic to store leading zeros, as recorded against the characteristic?

    Hi David,
    1. If you are mentioning about the "Characteristics"This is Standard Field name.
    2. You will not be able to influence the same,
    3. Also i doubt if you are talking about the Characteristic Value - Since only in the Char Value we will be able to define the length, etc.
    4. In case of Charvalues if you want leading zeros then create it as character , where you can store with leading zero
    Reg,
    Dsk

  • Can a Calculated key figure be derived from characteristic value?

    Hi,
    I would like to know whether BW allows to derive a calculated key figure based on a characteristic value. Let us say we have a row like
    PLANT-DAY-INVENTORYQTY
    and based on my plant value, I want to have another column 'CALCULATEDSCRAP' which is derived from 'PLANT' and INVENTORYQTY (I know this is a crude example, but will do for my need)
    Is there any way in BW to get this logic implemented?
    Thanks,
    Ajay Das

    Hi Tom,
    I have a very similar problem. In my if logic i compare to dates  but I don´t understand what you meen by
    "Therefore I suggested to add an attribute to convert the characteristic in a number and use this number for the if logic."
    For the moment, the condition calculates each field individualy correctly but doesn´t treat them as numbers when aggregating.
    Thanks in advance,
    Victor.

  • Equipment Partner added but not in characteristic selection values

    Hi,
    I want to ask some tips here because in the equipment master, a partner was added (as an operator) but when we try to add that partner as the driver (characteristic) it is not in the selection. What could be the possible causes of the data not flowing to the selection values whilst it has been added already as a partner and HR confirmed that the record is already in their master data.
    rgds,
    jay

    Eugene,
    My apologies. here's the answers.
    do you see the strange data in the master data of the IO?
    I am not able to see tha master data in the IO. In the config of the IO, the "With Master Data" option is unchecked.
    The IO is used in a number of cubes. So in order to try and see if the values came from transaction data, I went to each of those cubes and ran a quick check of the infocube contents. I focused the search on one of the "incorrect" values. (The volume of data in the cubes is enormous). I did not get any results from this search.
    can you suggest anything more I can do?
    best regards,
    Allan

  • Display alternate unit of measure as a characteristic

    Hello,
    I have successfully implemented the 'How to ... Report Data in Alternate Units of Measure' using the business content infocube 0IC_C03, Material Stocks/Movements.
    The infocube currently contains only base unit of measure.
    In the queries I am displaying key figures in base unit and alternate unit of measure.
    My requirement is to subtotal by alternate unit of measure. Is this possible? If I add 0BASE_UOM to the query this has no affect on the alternate unit of measure.
    Can I add an alternate unit of measure characteristic to the infocube and populate it during query run time? Where would this configuration take place?
    SAP_BW 3.1, content 3.3.
    Thanks for any suggestions,
    Mark

    HI,
    Go to Inforecord of that material with that vender on that plant.
    Change Inforecord(me12)...here in general data...change the order unit.
    system will give the conversion factor as u defined in material master.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Why Scene (Action-Set) added to Home(HMHome) always have updated Characteristic's(HMCharacteristic) values :HomeKit

    I am working on a Demo iOS application based on HomeKit API's.
    I have created Scene(Actions-Set) AS1 for Particular Home(H1) with some services(S1 S2...) to perform multiple action in a go.
    I can create multiple scene without any problems, but I am facing problem in updating the any of created scene
    Flow of My Application
    Show Added Home(ListView)
    Click on Any Home, detail screen appears With few Options(Accessory A1 ,Room A2  ,Scene A3....)
    Clicking on A1 Add the Accessory(can change the characteristic of added Accessory's service from here)
    A3 has a list of added Scene (Action-Set) as well a button to add new Scene (Action-Set) to current Home
    User can Click on any added Scene(ActionSet) to update its actions and name both
    Problem : Once I changed the characteristic of services from Accessory A1 option then the characteristics added to Scene's action gets updated to the same value.
    My Assumption:I was thinking each created Scene (Action-Set) maintain separate characteristics's value separately and if user modify characteristics of any service from accessory A1 then it should not affect the value of actions added to saved Scene if user picked that accessory in created Scene's action
    My Approach to Update Action-Set(Scene) as,
    Once user click on any added Action-Set services list appear where user can click on any services to updated its characteristic
    Access Actions of current Action-Set
    Access characteristic of each action( HMCharacteristicWriteAction)
    Access service of characteristic
    Create instance  of CustomServices(to keep track of some other info like user included that service to into current action set etc.)  and add it to Data-source and avoid repetition
    Once user done with value change and click on update actions button
    Start the Update process
    Update Scene (action-set)
    1.Check if User changed the name of Action-set,
    Then update the name of action set first
    As success block executed deleted all previous actions if exist.
    Add new actions to updated scene.
    2.If Scene(action-set) name is same as Old Name,
    Deleted all previous actions if exist.
    Add new actions to updated scene.
    I have gone through the HomeKit documentation many times but found nothing related to this issue.
    As far as I understand the action-set's concept it should maintained characteristics value separately so that we could change it's actions values later on.
    I am still facing the same issue and I am sure it is a issue because once I try to re-execute the same action set( pre-condition: services characteristic's value changed by user from A1 option).
    It is executed successfully and update the all those accessories which have the same characteristics as action set has.
    Please anybody who has found similar issue with scene help me out and correct my assumption.
    Please feel free to point me if I am following wrong approach.

    I have gone through HomeKit documentation again many times but found nothing related to this issue.
    As far as I understand the action-set's concept it should maintained characteristics value separately so that we could change it's actions values later on.
    I am still facing the same issue and I am sure it is a issue because once I try to re-execute the same action set( pre-condition: services characteristic's value changed by user from A1 option).
    It is executed successfully and update the all those accessories which have the same characteristics as action set has.
    Way to provide Interface to user to update action-set as,
    Once user click on any added Action-Set services list appear where user can click on any services to updated its characteristic
    Access Actions of current Action-Set
    Access characteristic of each action( HMCharacteristicWriteAction)
    Access service of characteristic
    Create instance  of CustomServices(to keep track of some other info like user included that service to into current action set etc.)  and add it to Data-source and avoid repetition
    Once user done with value change and click on update actions button
    Start the Update process
    Update Action-set process
    1.Check if User changed the name of Action-set,
    Then update the name of action set first
    As success block executed deleted all previous actions if exist.
    Add new actions to updated scene.
    2.Action set name is same as Old Name,
    Deleted all previous actions if exist.
    Add new actions to updated scene.
    Please anybody who has found similar issue with scene help me out and correct my assumption.
    Please feel free to point me if I am following wrong approach.
    Thanks,

  • Problem in Creation of implementaton for Badi FAGL_DERIVE_SEGMENT

    Hello Abapers,
    I am facing problem when creating a implementaion for BADI FAGL_DERIVE_SEGMENT,
    FAGL_DERIVE_PSEGMENT,
    The error is when i am going to save any of BADI implemenations, Specify filter types..
    The badi is very important to meet my requirement.So How to solve this problem.
    Waiting for your favourable replies.
    Thanks & Regards
    Maruthi.K

    Hi,
            Implementing a Filter-Dependent Business Add-In
    If you want to use a filter-dependent Business Add-In, you will need an implementation for each relevant filter value. Multiple filter values may use the same implementation, however.
    When implementing a filter-dependent Business Add-In, proceed as follows:
    Create an implementation by referring to the corresponding Business Add-In definition.
    Enter a characteristic filter value for the implementation, or choose F4 and select a value from the list of possible entries displayed. In principle, it is possible to define multiple characteristic filter values for each implementation.
    Use the Class Editor to fill the interface method.
    In the string conversion example, you would make the following entries for each country:
    BRD:
    translate parameter to upper case.
    Ireland:
    translate parameter to lower case.
    Italy:
    translate ...
    Repeat steps 1-3 for each implementation that you create.
    Activate your implementations.
    Now, whenever you execute the report program described above, different country-specific implementations are executed.
    Regards

  • Multiple projects on a single BI environment

    Hi,
    We are using for our project a BI environment that is already used by 2 projects.
    For sure, I need now a datasource (re vendor survey flow) that is already in use by another project (I want to use the BC flow already used 'as is' by the project).
    I replicated the DS from my source system to BI. Now, in BI, I can see the same flow (from DS to cube) for my source system and their source system.
    1 - if I load master data and transactional data from my system using this flow; what would be the impacts on <u>their</u> flow? They should be impacted and values overwritten. Correct?
    2 - what are the options of sharing the same DS (same object names) with different projects?
    3 - Do we have any solutions of "mass renaming" during object copy??
    Thanks for your insights.
    chris

    Hi Chris,
    normally you need to make sure that your master data is unique in all systems --> that means loading a vendor from system a with no. 0815 is Mr. Smith in 5th Avenue No. 5 in 99999 Somewhere is exactly the same coming from system b ... If you cannot ensure that a vendor with no. 0815 is the same you need to somehow harmonize the data or make it possible to identify them coming from different systems --> check this: https://websmp105.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=184948&_NLANG=EN
    For your transactional data it is a lot easier. Here you can just add 0logsys or 0soursystem as a characteristic to your cube, fill it from the update rules and you can separate the data by filtering on that object in the query or having different authorizations on that objects.
    But anyway, getting the master data updated correctly is the toughest part in that project and there is not only one solution.
    kind regards
    Siggi

  • Line layout option for G/L account

    Dear All,
    When we clear G/L account using tcode F-03, we get line layout as
    Assignment, document no, document type, Posting key, posting date, amount.
    I want to add  material number column to this line layout.
    1. I tried using  IMG -> Fi-> AR/AP -> Vendor accounts->Line items-> Open item processing -> define line layout
    Here we cannot add material in line layout, because fields are extracted from structure RFOPS.
    MATNR(material number) field is exist in table BSEG, not in structure RFOPS. So we cannot add MATNR field in Line Layout here.
    2. In this path, IMG -> FI -> G/L accounting -> Buisnes stransactions->open item clearing -> Make settings for processing open items ->  Here we do not have option to change line layout for clearing of G/L account. Here we can change it for diaply and change documents.
    Could any one help me in this case?
    Thanks in Advance!
    Regards,
    Nidhi

    Hi Nidhi,
    1.Please refer to note: 647773 and note:693288 if you want to make another field available in open line items seletion screen. these are modification notes.
    2.as far as I confirmed in sap testing systems( release 470 and 600), there is create and change button existed, so if you don't have change and create button available in T-cd:O7Z1, I guess that you don't have the change or create authorization.
    Addition if you want to maintain default value in T-cd:07V1, please double click the layout,then you can define it.
    WIth Best Regards,
    Gladys xing

  • Selection screen for logical database PNP..

    hi all,
    I am having a requirement to produce a HR Report where i need to use logical database PNP. Now the issue is i need to supress some of the elements of standard selection screen of PNP and add a couple of fields of mine.
    i have been looking all around and i got few of the below methods.
    its good to use a report category.
    somewhere it says include it in ur program using selection screen block..
    can you please guide me which is the best way and what would be a perfect solution?
    thanks in advance,
    Reena

    Hi reeena,
    1. simple
    2. u want to
      a) add ur own fields
      b) suppress some fields
    3. a) is simple, just add your parameters,
       in your program, and they will appear
       b) use SCREEN logic
    4. just copy paste to get a taste of it
      (it will HIDE the PAYROLL AREA field)
      and add MATNR field
    5.
    report abc.
    TABLES : PERNR.
    PARAMETERS : MATNR LIKE MARA-MATNR.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF SCREEN-NAME CS 'ABKRS'.
          SCREEN-INVISIBLE = '1'.
          SCREEN-INPUT = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    regards,
    amit m.

  • Value does not exist for "..." in connection...

    Hello,
    I have following issue using Design Studio 1.3.
    I was changed my source of dashboard from universe to Bex Query.
    When it was done I have received following Script Problem related to CheckBox
    Description
    Location
    Event Script
    Component
    Application
    Type
    Value "Sourcable" does not exist for "GP_XSRCB" in connection "cuid:AdpcHfZ9h0VKrXD0XhomzOs"
    Line 3
    On Click
    CHECKBOX_1
    [rkams1157] S2P_PROTOTYPE_MDM_001-002 - dev
    Design Studio Script Problem
    Below please find the Script syntax:
    if(CHECKBOX_1.isChecked())
      DS_2.setFilter("GP_XSRCB", "Sourcable");
    else
      DS_2.clearFilter("GP_XSRCB");
    I would like to note that this script on CheckBox works fine based on universe as a source.
    Please advice.

    Dear All,
    I am also facing same problem, while doing PGI (Post Goods Issue)
    Can any one help in this please.
    And the error message was
    Characteristic value  SEL F1P ADD 82947 does not exist for characteristic PAPH4 (ProdHier01-4)
    Message no. KE0C133
    Diagnosis
    The characteristic "PAPH4" ("ProdHier01-4") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" SEL F1P ADD 82947") is not valid in CO-PA.
    System Response
    The data is not consistent and therefore cannot be transferred to CO-PA.
    Procedure
    With the function Maintain Characteristic Values, you can add characteristic values to those that are valid.
    1. When, I check contents of table MARA-PRDHA, it contains 17 character Alphanumeric input "SEL F1P ADD 82947"
    2. When, I check character PAPH4 in KEA5-->Data type was CHAR and length was 17.
    3. Characterstick PAPH4 cannot be maintained using KES1.
    Thanks & Regards
    Sahas

  • Enhancing the FAGLFLEXA(General Ledger: Actual Line Items) table

    Hi All,
    I am trying to add Material Number (MATNR) to the table FAGLFLEXA(General Ledger: Actual Line Items)
    For this i have added Material number in the include CI_FAGLFLEX04 of the table  FAGLFLEXA.
    But still material numbers are not appeared in the table FAGLFLEXA.Material number exist in the structure COBL - Coding Block,i believe SAP standard programs has to pick up material number from coding block to FAGLFLEXA table.
    Please advise me if anyone enhanced this table .
    Regards
    L Appana

    Hi Appana,
    I also want to add MATNR to FAGLFLEXA. Can i know how did you go about creating new segment to flow MATNR in FAGLFLEXA?
    Somar
    Edited by: Somar on Mar 6, 2009 10:37 PM

Maybe you are looking for