Add Memo Functionality not working in UWL

Hi All,
We have added the code in custom UWL to activate the "Add memo" functionality under "You can also:"
in portal inbox for the tasks as per suggested in help.sap.com.
Now when I enter the value and title, then click on submit under Add Memo, i get an error "This action is not valid for this item". I have tried the same with different tasks but for all i get the same error.
Please assist me if any other configuration has to be done to make it working.
Thanks
Edited by: Namit Mehta on Apr 17, 2009 6:00 AM

I found the answer myself.. along with "addmemo" parameter , we also have to add "uploadmemo" parameter in UWL task configuration file.
THis resolved my issue.
Thanks

Similar Messages

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

Voice Memo does not work on 3g

The voice memo does not work. If I scream in to the mic it finally shows movement on the readout. But, when you play it back all you get is static noise where I screamed. Other wise, any normal voice speck is totally silent.
Actually it works with the iPhone head phones but not the mic in the phone it's self.
Message was edited by: Hoddypeek

Yes, the low level while recording doesn't result in a low or weak "memo". Sounds fine and mails to my email as well . . . But !
I had a phone-message waiting two months, a little song-fragment I called home to leave with the hope that Voice-Memo would eventually save it for me. And it sounded better once mailed that it even did playing out of my cheap little land-line speaker ( I guess mic-placement is everything ! )
But the recording was 2 min 50 seconds and trying to mail it to myself brought up the warning that it was "too big" !! Luckily, the first 27 seconds was unrelated and expendable . . . and being able to trim it did the trick.
*So what's the size limit on a mailable Memo Apple people ?*
( It was 4.1 mb as attached to the mail )
Also, how odd is it that it was still "Sending" within the iPhone, yet already sitting in my iMac's email well before the "airplane whoosh" of sent mail sounded.
Hmm . . . . .

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Add Row Button Not Working

I've read the threads and done numerous searches. Not sure why the add row button isn't working, other buttons work.
Here's what I've found and done.
Print button subform - positioned (have tried flowed, too) allow page breaks
Table: body rows vary   -    Insert wrap in subform - subform flowed - allow page breaks
     row 1 binding - repeat row for each data item - min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)
Form properties - preview in dynamic PDF, interactive   -   PDF render format dynamic xml, run in 9.0 or later (to remove errors)
Insert Row Button in Subform Row 1 Cell 1 (not counting header row) on click, JavaScript run at client tried table.row1.instancemanager.addinstance(1);   also tried full path
saved as dynamic pdf
My hierarchy looks like:
form1   [autofit]
     master pages
          page 1
               untitled content area
     printbuttonSubForm [flowed, top to bottom, allow page breaks]
          untitled subform [flowed, top to bottom, allow page breaks]
               printbutton1
          tablesf    [flowed, top to bottom, allow page breaks]
               table1    [allow page breaks]
                    headerRow
                         cell1
                         cell2 etc
                    Row1   [allow page breaks, repeat row for each data item, min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)]
                         subform   [allow page breaks, repeat row for each data item, min 1, max 25
                                        (why won't it keep an initial count when I try putting in 1 or 0?)]
                              button1    table1.row1.subform1.instanceManager.addinstance(1);
                         cell2, etc
     Referenced objects
Questions:
I click the Add Row button, but nothing happens, why? The print button works.
Found a reference to def instances of same row, what does that mean?
Is my hierarchy correct?
How to set Form1 to flow? Object says mixed objects with no options
Many thanks for your assistance! Leslie

Hi Leslie,
There could be a few things.
First check that the form is saved as Dynamic XML in the save as dialog. If it is saved as Static the add instance will not work.
Make sure that the object you are targetting is set to repeat in the Object > Binding tab
Check your syntax in the script editor (button above the editor). Some of your post is not camel case. For example addInstance and instanceManager. Note the capital letter for the second word.
If you could share your form it would be easier to track down what the problem is. You can use Acrobat.com or YouSendIt.com or some other file sharing site. Just remember to post the published URL.
Good luck,
Niall

Copy/paste function not working in Firefox 22. Always good in previous versions

Copy/paste function not working in Firefox 22. Always good in previous versions editions

Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P.

MDX -Children count function Not working in Case statement

Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
Santosh

Hi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support

Palm Desktop 6.2.2. and Lookup function not working in Windows 7

Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Keyboard + mouse functions not working

After updating InDesign CC 6-days ago started to have issue with all keyboard + mouse functions not working ex. shift key does not constrain proportions when scaling. A restart fixed the issue thr first time. Today I have installed latest update and shut down and restarted several times does not fix issue. On a MacBook pro running OS X Mavericks 10.9.2.

Disconnected extrenal devices ie keyboard and Wacom Bamboo tablet and restarted computer seemed to correct the issue.

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

It works when I reset my all settings...
Settings>general>reset>reset all settings
It never delete ur all contacts and any others,but ur wallpaper and wifi connection will change..it can be as before...

PowerPoint add-in is not working when installed for All Users using msi installer.

Hi All,
I have created PowerPoint add-in using c#-vsto. I have created msi installer to install this add-in with following two options:
1. Just me
2. Everyone
However, add-in is not working properly (Events and custom task panes are not working).
I have created registry key as below
1. for "Everyone" : HKLM\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
2. for Just me : HKPU\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
But when I set InstallAllUsersVisible property to False (When add-in is installed only for current user ), then add-in works fine for current user.
Please let me know if anything is missing!!!
Thanks

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to develop the add-in, you'd better post your question to the MSDN forum for VSTO
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT1977 I bought apps. My kid delet that after few weeks. Then I have downloaded to same ipad. But some functions not working.

I purchase some apps, my son deleted some. But I have download again from cloud. But some functions not working ask me to pay again. How can I use functions without paying again. Thank you

Search around on the app settings and see if there's a "Restore purchases" option.

Add Memo Functionality not working in UWL

Similar Messages

Maybe you are looking for