Add message preview for unread messages

Is there a way in the main message inbox all unread messages can display a short preview (Outlook has this option)?
I don't mean displaying a preview pane for a single highlighted message. I want a short message preview that displays in the Inbox for each individual unread message.

Thanks for the note, Jeffrey and trust me when I say I'm a die-hard Apple believer. But, at work I support Windows machines and Outlook has views to show only unread messages. As soon as a messages is read and we move on to the next messages, the read message drops out of the list. This is what I'm look for so that I can apply it to the few Macs I also support at work.
What Apple's Mail gives us is good, but what we were hoping was to have the smart mailbox work the same way that Outlook's feature does. However, I still much prefer working with Mail rather than with Outlook. So, we will adjust.
Thanks again.

Similar Messages

How do I turn off my message preview for Facebook message on iPod touch 5?

I use to be able to turn off my message preview but now I can't do that and need to know how to.

Go to FaceBook's app support site

Wait for unread message on broadcast channel during import

Hi All,
I am trying to import a dump file on Oracle DB, Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi.
My import hangs, below is the log.
Import: Release 10.2.0.3.0 - 64bit Production on Tuesday, 03 April, 2012 21:09:20
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
Master table "CIP_USER_PED1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "CIP_USER_PED1"."SYS_IMPORT_FULL_01": ****@** remap_schema=**** EXCLUDE=STATISTICS
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/VIEW/VIEW
It doesn't proceed further.
I am not seeing and sessions blocked or locked but I see session waits.
SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
MASTER     ACTIVE     468     Idle     wait for unread message on broadcast channel
WORKER     ACTIVE     467     User I/O     direct path read
select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='CIP_USER_PED1'
and program like 'orac%'
and s.saddr = D.SADDR;
Below is the only message I see in alert log.
Tue Apr 3 19:15:52 2012
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=22, OS id=23456
to execute - SYS.KUPM$MCP.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1', 'KUPC$C_1_20120403191552', 'KUPC$S_1_20120403191552', 0);
kupprdp: worker process DW01 started with worker id=1, pid=23, OS id=23458
to execute - SYS.KUPW$WORKER.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1');
I have googled but haven't been able to resolve the issue.
Can anyone help me with this ?
Many Thanks
Kalai

km1612 wrote:
Hi All,
I am trying to import a dump file on Oracle DB, Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi.
My import hangs, below is the log.
Import: Release 10.2.0.3.0 - 64bit Production on Tuesday, 03 April, 2012 21:09:20
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
Master table "CIP_USER_PED1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "CIP_USER_PED1"."SYS_IMPORT_FULL_01": ****@** remap_schema=**** EXCLUDE=STATISTICS
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/VIEW/VIEW
It doesn't proceed further.
I am not seeing and sessions blocked or locked but I see session waits.
SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
MASTER     ACTIVE     468     Idle     wait for unread message on broadcast channel
WORKER     ACTIVE     467     User I/O     direct path read
select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='CIP_USER_PED1'
and program like 'orac%'
and s.saddr = D.SADDR;
Below is the only message I see in alert log.
Tue Apr 3 19:15:52 2012
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=22, OS id=23456
to execute - SYS.KUPM$MCP.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1', 'KUPC$C_1_20120403191552', 'KUPC$S_1_20120403191552', 0);
kupprdp: worker process DW01 started with worker id=1, pid=23, OS id=23458
to execute - SYS.KUPW$WORKER.MAIN('SYS_IMPORT_FULL_01', 'CIP_USER_PED1');
I have googled but haven't been able to resolve the issue.
Can anyone help me with this ?
Many Thanks
Kalaiproper invocation of procedure below will allow you to monitor progress
by observing contents of resultant trace file
DBMS_MONITOR.SESSION_TRACE_ENABLE(
    session_id   IN BINARY_INTEGER DEFAULT NULL,
    serial_num   IN BINARY_INTEGER DEFAULT NULL,
    waits        IN BOOLEAN DEFAULT TRUE,
    binds        IN BOOLEAN DEFAULT FALSE,
    plan_stat    IN VARCHAR2 DEFAULT NULL);

Contact photos wrong then search for unread messages

When I search for unread messages in apple mail, every contact photo is my profile photo instead of the contacts profile photo. Any ideas how to fix or is this a bug?

Thanks - I understand the read flag is set on the server, but I don't think that's the case here. Mail is not incorrectly reporting some messages as read when they aren't - it just has the count of unread wrong (in subscription folders, not in the inbox)...
Also although I do access mail from other machines/web client it happens when I haven't...
Ie
send mail to myself at address that gets filed into a folder by the server
no log on to mail from web or other computer
mail arrives in folder, reported by Mail as 2 unread messages
click on folder, resyncs very quickly, unread count revised to 1 (correct)
In fact once I was watching while a mail came in - the count first showed 1 (correct) then quickly changed to 2.
I'm not sure what extra info I can provide - I had imagined this was a common problem since through google I found many others observing the same behaviour (but no solution).
The IMAP account is with Fastmail, who I believe run Cyrus.
I have letterbox and IMAP-IDLE plugin, but this problem was happening before installation of both of those.
Thanks again,
PS
as a side note - my drafts folder (on the server) reports 2 messages unread (there are two messages in there) - is this normal? (drafts to be reported as unread) - I must admit I'd prefer they weren't.

[svn:bz-trunk] 24018: Updates to the message to send across only required message attributes for small message format

Revision: 24018
Revision: 24018
Author:   [email protected]
Date:     2012-07-11 02:23:31 -0700 (Wed, 11 Jul 2012)
Log Message:
Updates to the message to send across only required message attributes for small message format
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/messages/AbstractMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/AsyncMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/CommandMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/ErrorMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/Message.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/RemotingMessage.java

Im not sure what's the problem, but let's try to figure it out. First of all explain what do you mean by "it works very bad". Doest it hang, is it slow, is quality unacceptable.
Myself, I have one problem with JMF. When i run video & audio on my Centrino 1.4 GHz, it just takes 100% CPU! And of course quality becomes degraded. Check if you have something like this.

Smart mailbox for Unread messages doesn't update automatically.

Hello everyone.
I've set up a smart mailbox in Mail to show only my unread messages. But, it doesn't update automatically in that when I read a message, that message remains visible in the list until I leave and then return to the "Unread Messages" smart mailbox.
Any thoughts as to how I can get it to update automatically?
Thanks very much.....

Thanks for the note, Jeffrey and trust me when I say I'm a die-hard Apple believer. But, at work I support Windows machines and Outlook has views to show only unread messages. As soon as a messages is read and we move on to the next messages, the read message drops out of the list. This is what I'm look for so that I can apply it to the few Macs I also support at work.
What Apple's Mail gives us is good, but what we were hoping was to have the smart mailbox work the same way that Outlook's feature does. However, I still much prefer working with Mail rather than with Outlook. So, we will adjust.
Thanks again.

How can I make the message date appear with the time for unread messages?

Mail systems I am moving from display the date & time with the messages. I need this displayed to determine aging and importance of received mail. When archiving/saving old mail it helps filing mail off and not duplicate archived messages.

Thunderbird displays time and date for all messages except for the present day messages. The time only is displayed for today and the date is appended at midnight.

My 4S battery died as a message was incoming, "Unread message" icon not going away

My phone battery died as a message was incoming. Now when I charged it and turned it back on, the little red 1 on the message icon was there. I opened the message, read it, then went back to the home page..but the icon is still showing one unread message. I rebooted my phone, it went away until i opened the message icon, when I closed it again the 1 came back. Whenever I receive a new message, it just adds to the total, showing 2 even though there is only one!
Any help?

You could simply clean out any muck in there with a soft brush.

Message Tracking for Rejected Messages

We are using Exchange 2013, trying to use message tracking to determine if a message that was sent to us was rejected, I can run the messagetracking powershell command and I get reslults. would there be a "reject" event id for these messages?
Thanks
Pat

Hi ,
Below command will be used on the exchange management shell to have a grid-view on the output.
Get-TransportService | Get-MessageTrackingLog -recipients "[email protected]" -ResultSize unlimited -MessageSubject "test" -eventid "fail" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
| Out-GridView
(or)
Below command will be used on the exchange management shell to have the output on the csv file.
Get-TransportService | Get-MessageTrackingLog -recipients "[email protected]" -ResultSize unlimited -MessageSubject "test" -eventid "fail" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
| Export-csv c:\nithya.csv
Reference
Link for message tracking : http://exchangeserverpro.com/exchange-2010-message-tracking-log-search-powershell/
Thanks & Regards S.Nithyanandham

Modify the message type for the Message no. CK239

Hi,
I would like to change the message type E to W for the message CK239.
Is it possible?
Thanks.
Jean-Marc

Hi,
yep, agree with Eli. Please check this [thread|Re: T-code SE91 queries ??; on the issue of changing messages.
Rgds
Karl

Is it possible to disable New Message sound for SPAM messages?

I inherited a role email account which receives an incredible amount of spam. Mail's SPAM filters do a good job or routing these messages to the SPAM box and keeping them out of my inbox, but I still receive a "New Message" sound notification every time a new SPAM message arrives. Is it possible to disable the "New Message" sound alert for SPAM messages while still receiving the alert for new messages that arrive in my inbox?
Thanks,
jason

Try this:
Go into Preferences -> General and uncheck the box that says "Play sounds for other mail actions".
I'm not sure if it will work since that's really still "new" mail, but it might be worth trying.

Mail, unread message issue/phantom unread message. Help!

Hi,
I deleted an unread message from one of my mailboxes on Mail, but even though it deleted the message and I have emptied the trash, it is still telling me I have an unread message. Does anyone know how to get rid of this? I have deleted the account and recreated it. Marked all messages as unread and then read, but still no luck. Can anyone help me?
Thanks

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
Try reindexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages

IPhone displays Arabic in message preview but not message body

Hi,
I have an iPhone 3GS and it used to support Arabic just fine, however lately when I get e-mails with Arabic in the message body I can see some of the Arabic in the message preview until I open the message where everything is then displayed in gibberish. Typing in Arabic is still OK, and Arabic is displayed fine in Safari; the problem is just in Mail. Any help on this matter would be much appreciated.
Thanks

Ok try this kennylebouef,
Open multitasking by double tapping the home button (at the bottom), a row of apps you've recently used should appear, tap and hold the photos app until it wiggles and displays an x, tap the x to close and then reopen the camera roll app. Let me know if it works. It's odd and frustrating, I know.

Giveing 3rd parties access to message tracking for their messages?

Hello,
Before I go looking at documentation to see how I would like to find out if it is possible, with Oracle SOA Suiet 11g R1 PS2/3 B2B, to configure the B2B Web Console in such a way that a 3rd party can be given view access to message tracking and/or KPIs for partnerships that involve their messages only?
The purpose of this is to selectively provide visibility to 3rd parties and minimise the effort the hosting infrastructure support needs to go to to help troubleshoot messaging issues.

Hi Michael,
Now the question on what is the Enterprise Identiry storeAn Enterprise Identiry store is a store which maintains authentication information of all the users of an enterprise and categorizes (or groups) them into particular roles, for e.g. a LDAP system. By default, each weblogic domain has an embedded LDAP server which stores the information of all the users of that domain. The Default Authentication, Authorization, Credential Mapping, and Role Mapping providers of Weblogic use the embedded LDAP server as their data store.
and where do I look to find out how to created the users, the roles and the assignments So if you are working with default Weblogic LDAP, then you have to just create a user on Weblogic and assign it to appropriate group. Then assign a specific role to this user on B2B console (because B2B uses the Weblogic's security framework for authentication & authorization). I have written a short blog on the same which you may refer (here I have added a user in Host TP so it belongs to Host Admin/Monitor, you may perform same steps to add a user in remote TP user's tab to make it remote admin/monitor) -
http://anuj-dwivedi.blogspot.com/2010/10/enabling-weblogic-user-to-login-on-b2b.html
You may also refer section "5.3 Adding Trading Partner Users" in B2B user guide -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/b2b_tps.htm#BABHCGFJ
To understand Weblogic's security framework, you may refer -
http://download.oracle.com/docs/cd/E17904_01/web.1111/e13707/toc.htm
http://download.oracle.com/docs/cd/E17904_01/web.1111/e13747/secroles.htm#i1206135
Regards,
Anuj

PI 7.1 SOAP Adapter - Message Payload for Failed Messages - Where to find

We are exposing a webservice through SAP PI. Occassionaly we have customers calling our webservice and some failure occurs. The error is usually the way that the customer is calling the webservice (missing elements, misnamed tags, bad content in the WS payload..). Generally in these cases we can see the error in communication channel monitoring.
Here is an example:
12/12/11 4:39:07 PM com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: cvc-complex-type.2.4.b: The content of element 'SupplierInvoice' is not complete. One of '{"":Invoice}' is expected. at line 1, column 227
12/12/11 4:39:06 PM request received for a channel
I understand the issue, but it would be extremely helpful to have the full SOAP Envelope and Payload of a request when it fails. The communication channel will show a SUCESSFUL message payload with a link to it. But it does not show a failed one.
Where can I find the FAILED payload that accompanies this message? These failures occurs before any mapping or being seen in RTWB Adapter Engine message monitoring... I did some searching around, but did not find anything offhand. I would greatly appreciate any pointers from anyone who has crossed this bridge.

Hi,
When the web service is being called by external application, the first point of contact would be the sender communication channel which converts the SOAP message into XML message and pass to integration engine ( In case of success )
But if the web service call fails due to WSDL validation, Authentication issue, Bad content, invalid content type, you would not see the payload in the sender communication channel or in Adapter engine. You can just see error message in the sender communication channel . I have experienced this many times and i always ask the web service team to provide the SOAP message for validation/investigation purpose.

Add message preview for unread messages

Similar Messages

Maybe you are looking for