"Add MMS APN" option?

Hi Verizon,
I'm looking to configure my Verizon HTC 8X (Windows Phone) to work with an international SIM I bought. I was told to configure the MMS APN settings from the Settings > Cellular menu, but I cannot find the "Add MMS APN" button. Am I missing something? Has it been removed from Verizon phones?
Thanks,
-Julien

Hey Arnett -- Unfortunately the international carrier has referred me to VZW once more. I'm currently in the US and I cannot get MMS to work on my 8X with this sim card. However, I can confirm that the sim card is not the issue -- I've plugged into other VZW phones and it worked fine only after I changed the MMS APN settings on these other phones.
The VZW 8X I have does not seem to have the option of changing the MMS APN settings (even though 8Xs on other carriers do, as I mentioned previously).
Thanks for your assistance,
-Julien

Similar Messages

Add MMS APN to Unlocked 8X

I bought a Verizon 8X because it's unlocked, and I took it with me overseas and put in another SIM card. I am able to make phone calls and go on the Internet; the only thing I cannot do is SMS and MMS. When I go into settings to add Internet APN or MMS APN, it does not save my settings. Can somebody help me figure this out? Am I missing something, or is there a Verizon restriction even though it's unlocked?

I'm in a similar situation excepting that I can't access the internet even though I'm using my old sim card here in Germany. Would be interested in knowing if anyone else has had the same problem.

UNABLE TO ADD MMS APN

Do anyone know why you are Verizon HTC 8X will not save your mms apn settings?

Hi spizza,
There actually should be no need to adjust your MMS APN settings. Are you having trouble with your picture messaging? Any error messages? You can also reach us on Twitter @vzwsupport for more immediate assistance.
Thank you
JenniferH_VZW

How to add mms and apn in ios 6.1.3

I can not figure out how to use the iphone configuration utility. Where and how do i enter the mms proxy, mms, apn and so on so i can fully use straighttalk. I know nothing about this stuff at all, it was so much easier on ios 4.3.5.

Once your device is already updated to iOS 7 you can no longer downgrade it from the previous version. If you have partially downloaded or it was just completed and prompting you to install if there will be option. Simply go to Gen>reset>erase all contents and settings. This will restore your device to its original factory settings activate your device using apple I'd via wifi or sync to iTunes using apple I'd.
<Edited By Host>

Lumia 900 MMS APN

Hello,
I am trying to help someone that is using a Lumia 900. They are not able to send or receive MMS messages. They are on an MVNO that operates on the ATT network. There is no place to add an MMS APN in the phone. I know that there are applications that people say will work. I would prefer to add the APN manually. I found posts that say that I can do the following.
Go to the phone app
Dial ##634# and click Send
When prompted for a password type 277634#*#
You should now be at "Factory Menu"
Choose "Engineer Menu"
Choose "Other Setting"
Verify that "Set ADC" is set to Enable
From the "Other Setting" page, choose "Set network profile"
You should now be on the "Set network profile" page and in the bottom half of the window you should see a list of *.xml files. These appear to be the network configuration files.
Choose "_PROV_ATT_US_310_410.xml"
Can anyone confirm that this method works? Does it change any settings other than the APNs?
Can someone post a copy of the xml text so that I can see if before making the change?
Thanks!

Settings > accesspoint should have the option to add the MMS access point. Provided the phone is at WP 7.8
Actually the last available accesspoint version should set this automatically without the need for tinkering with an inherently dangerous option such as the service menu which really is not intended for 'personal use'. If you choose to go that way you're basically on your own.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

MMS, APN, OS 3.0 for India

Dear All,
Just couple of day back I have installed OS3.0. I am using Vodafone India service.
After installing this new OS, I am not able to see either APN setting or MMS sending option in my device.
can you please guide for the same?
Waiting for the reply
Regards
Jiggy

mms on my airtel worked like a charm since i updated to 3.0 and airtel always had mms for other phones...
so i am assuming that vodafone also has mms service for their customers..
it'll be best to call customer care of vodafone and ask them how to activate your mms on your iphone...
maybe you will be asked to send sms to some number...

Text editing - can you add text editing options on the 'in-browser editing'

Text editing - can you add text editing options on the 'in-browser editing' tool?

You can only replace existing content, not edit the page structure. Refer to the respective help sections.
Mylenium

How to add a new option for group by in a excel report

Hi,
there is a enhancement in a excel report
I need to add a new option for group by
help me
Regards,
Raghu

k

Opening or saving photo attachment; add to iphoto option on save

On my computer, in the Mail application, I always see the "Add to iPhoto" option on the Save button when someone has sent me a photo regardless of whether it is one or several. Does anyone know if there's some way to make this option show or not? I was working with someone on their first version Intel iMac which we had just upgraded to Leopard, and on one e-mail with several photos, the option showed. However, on an e-mail with only one picture it did not. Does anyone know what makes the "Add to iPhoto" option show or not show?
My other question is regarding the contextual menu option "Open with" that shows when I right-click a photo received as an attachment in an e-mail. On my computer, when I right-click and then click this "Open with" option, I see a list of several options for opening the picture, one of which is "Import and View with iPhoto." When I looked at this on the person's computer referenced above, there were no programs listed, only the "other" option which opens a window for you to locate the program you want to use. I did not populate the list on my computer--the choices simply were there when I clicked "Open With." Does anyone know what makes these options appear in this list?
I ask because this person I am helping is not very computer savvy and these are the easiest ways for her to get pictures sent to her into her iPhoto library. I've tried searching Apple support and these boards, but haven't come up with an answer. Does it possibly have anything to do with the version of iPhoto you are running, or is it something to do with Mail? Thanks for any help on this.
Message was edited by: Barbara Batchelder

Ernie,
Thanks for your response. I took a look at the article you mention and will perhaps try replacing the preferences file mentioned if no other solution comes to light. I won't be able to try this right away as I won't be at the person's house right away. She is the main user of the computer and does have Admin privileges.
She had called me a week or so ago wanting to know how to get a photo someone sent her into her iPhoto library, and when I was explaining how to do it, the options available to me on my computer were not available on hers. So, when I was there yesterday, after upgrading her system to Leopard, I went into Mail and was going to show her how to get the photo into iPhoto. I thought maybe the difference was I already had Leopard and she was still using Tiger. However, the "Add to iPhoto" option wasn't listed on the Save menu in the mail with the picture nor was the "Open With" list populated. However, when I went to another message in her mail with several pictures attached, the "Add to iPhoto" option was there on the Save menu. That got me curious about why these things would be different. Why would the "Add to iPhoto" option show on a message with multiple pictures and not on the message with just one picture? On my computer, I get the message regardless if there is one picture or several in the message.
I see that article you referenced mentions the list getting populated based on programs that are used, so maybe I should try opening various programs and seeing if that gets them added.
Any other thoughts you have would be welcome.
Barbara

How to add a java option in oas 10g 9.0.4?

I need add a java option in my oas 10g...
I have an application implemented with jdeveloper 10g (10.1.2) and its need to use other jdbc libraries acording:
http://radio.weblogs.com/0118231/stories/2005/05/27/workaroundForDeployingAdf1012AppUsingIntermediaDomainsToOracleAs904.html
Using EnterpriseManager, i add a java option for the OC4J instance where my ADF 10.1.2-based application will be deployed:
[b]-Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar
but now, ths oc4j instance dont init
...my opmn.xml file contains:
<process-type id="ADF_050615" module-id="OC4J">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true
                         -Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
                         />
<data id="oc4j-options" value="-properties"/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true"/>
</category>
</module-data>
</process-type>
Help me please

Rigoberto, there should be no space between "-Xbootclasspath/p:" and the path "C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
By the way, one can always take a look at the logs at
  $ORACLE_HOME/opmn/logs
especially those files whose names start with OC4J~ if there is some wrong with oc4j processes. Those files are the default oc4j stout and sterr. If oc4j can not init, there should be some kind of error message in them.
By the way, the following line may be deleted since no property file is specified.
  <data id="oc4j-options" value="-properties"/>
Hope this helps.

How to add new payment Options in WEB SHOP

Hi all
We need to add new payment options in the B2C shop, but we don't find any customizing place to do it, we read about the BADI CRM_RISK_MGMT_BADI, but in the documentation said that we can set a Default payment option or exclude, but nothing about to add Customer Options.
Any info regarding would be very useful.
Best Regards

Look at your Payment Process Profile. THere should be a reporting subtab and within that subtab is a Separate Remittance Advice region. I believe that is where you specify the format for the remittance advice document (which is built in XML Publisher). Take a look at that.
John Dickey

How to add a new option to ADF dropdown

Hi,
I got a title field (#{bindings.title.inputValue}) which is pulled from AD, and ‘titlesList’ from a database. The problem is that if the title doesn’t exist on the selection, I will get a blank option. When it is saved, it becomes empty.
<af:selectOneChoice xmlns:af="http://xmlns.oracle.com/adf/faces/rich" id="ssoc2" value="#{bindings.title.inputValue}" simple="true">
<f:selectItems xmlns:f="http://java.sun.com/jsf/core" value="#{employeeBean.titlesList}" id="ssi2"/>
</af:selectOneChoice>
I’ve tried to use javascript to add the new item to the Selection. But when I save it, I got “Attribute value cannot be null”.
I’m thinking about when I create the titlesList in employeeBean, I can add the new title to the list. As long as I know the user ID inside the bean, I can get the title. But, I don’t know how to pass the user ID to the backend from Selection. In jdeveloper 11.1.1.5, I am not allowed to do this "#{employeeBean.titlesList(userID)}". So, how can I add a new option to Selection.
Thank you.
Edited by: 891549 on Jun 7, 2012 4:02 PM

how about adding
<af:selectItem label=" " value="" id="si21"/>to your existing selectonechoice

Lumia 1020 no add Internet APN menu

I have a Lumia 1020 and the current carrier in the ABOUT section of the settings is Australia Model 909 windows 8.1 When setting up for ATT's Consumers Cellular, when I try to edit the Internet APN their is no add Internet APN menu selection under SIM settings. The selection reads : Network selection and the choice is ethier automatic or search for networks. I need some help, can this device be used in the USA.

Hi, WmBill. When you say "windows 8.1", does it run with the Lumia Cyan update? You may see it under the Settings > extras+info. Make sure that all system apps are updated by scanning the QR codes from this link: Nokia Windows Phone 8 App Updates. About your next concern, is your phone locked to your network operator? Are you located in Australia? Check if both countries have the same frequency bands, see: http://www.worldtimezone.com/gsm.html. Also, it is best to coordinate with your network operator to inquire if they have partnered with the service provider in the US so that you may be able to use their services.
Keep us posted. BTW, we appreciate your visit here on our forum.

Add one Select-Options : LIKP-LGBZO into Shipment Transaction - VT02N

Hello,
Transaction - VT02N(Change Shipment) -- Now choose Select Deliveries(F6).
Now one Selection-Screen will come to Select Outbound Deliveries.
In this Screen I want to add one more Select-Options (LIKP-LGBZO)
How can I add this Select-Options into this Screen.
Please provide solution .
Edited by: Matt on Sep 22, 2010 10:04 AM - edit title - causing problems displaying in Firefox.

Hi,
we can not modify SAP Standard screen with out access key.
If you want any field validation try this Exit:
Enhancement V56BMOD Transportation processing: Field modification
Thanks,
AMS

How to add custom start options in VS package

I need to add custom start options in VS package.
Example:
Instead of showing "start", need to provide options like "Start in Firefox", "Start in Chrome" and handle their events on our own.
Any references would be helpful
Thanks in advance

Hi Daro,
the path to the billing module is "sap.com/wec/ecom/mc/billing". But nevertheless
1. you need only to enhance in your current modul the metadata.xml file with the link to your own myaccount.xml which you can create.
2. and then you can define within the new file the menu options you need.
3. the last step is to update your shop configuration with the new menu options.
Best regards,
Nico

"Add MMS APN" option?

Similar Messages

Maybe you are looking for