Add mouse-over text to photos in keynote '09

Hi,
I'm creating a presentation, and I would like additional text to appear when a user slides their mouse over the photo in the slideshow. For example, when I'm editing the slides, when I hold the mouse over the photo it says, "This image is a placeholder. Drag a new media file here to replace it". Is this possible? Can I change that text so that when a user plays a presentation, they can hold their mouse over the photo and see additional information?
thanks,
Ali

how can i point out something on the keynote lecture - no mouse action at all?
zoroo

Similar Messages

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

Photo Gallery with Mouse over text

I would like to extended the photo gallery concept and the
general phot effects so when you mouse over an enlarged image you
get formatted text drawn from the XML file.
Like blockbuster does on its site when you mouse over an of
the DVD images.

We released the
Spry
Tooltip preview to have an early feedback to this feature from
the community. You can use it experimentally to solve your need.
Cristian

Mouse-over Text Viewing doesn't work

When I go to my hosting company's webmail site in Internet Explorer, I can run my mouse over an e-mail subject listing and the first few lines of that e-mail will show up without clicking on the link. When I do it using Safari, nothing pops up so I have to click on each message to see any of the text in the e-mail. (Same thing with Firefox, by the way.) Is there anything I can do, or is it the website's fault (and if it's their fault does anyone know what's wrong)? I have tried both enabling and disabling pop-ups in my preferences, to no avail. I'm pretty sure it's not a pop-up thing, because it's not a new window that opens, rather it's like a flash thing appears.
One thing I noticed, when I mouse-over an e-mail subject in IE, everything works fine. But when I mouse-over in Safari, nothing opens AND the status bar shows the following text:
Run script "openmsg('21','Inbox',%20'message')"
I tried searching the forums and knowledge base but couldn't find anything. Thanks in advance!
Mac OS X (10.4.8) Macbook Pro

Hi!
Ok, now I'm a little bit confused
For testing, I deleted all Mouse InputDevices out of my xorg.conf. In ServerLayout I specified the following:
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Dell Notebook Keyboard" "CoreKeyboard"
EndSection
Now it works all perfectly.
On my laptop I have synaptics touchpad and a external usb wheel mouse. Is it deprecated to specifiy all devices (for example mouse devices) in xorg.conf? I'm consfused, because I thought the synaptics touchpad is a special device which needs complicated configuration ;-)
Best regards,
Flasher

Hover mouse over a group photo & individual image pops up?

My project is to do a mouse hover over individual faces on a group photo and display an image of what that person looked like back in high school.
So far I am able to display the persons name as I hover over their face but don't know how to also display their individual image.
I set up an image map with circular hotspots for each face.
Please visit www.phsclassof1956.com/50th_group.html
Any help would be appreciated.

You could do this very easily with Tooltips on an Image Map. See example below and mouse over Image Map of South America.
http://alt-web.com/testing.html
Scripts and documentation here:
http://www.walterzorn.com/tooltip/tooltip_e.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Mouse over text color change

I have just type the Black color text when mouse over it should be change red color.
How can do this?

You can also use the Infosemantics Hyperlink widget to mimic a normal hyperlink rollover colour change.
http://www.infosemantics.com.au/catalog/widgets/interactive/wdgt_hyperlink_01

Mouse over text/ image appears

Does anyone know if you can create text in dreamweaver that
when the mouse "rolls" over the text an image appears? The text
stays in place and the image would appear in the center of the
screen... I know this is possible in Javascript, but I'm not
advanced enough to code. Is there a technical name for this type of
text effect? Any help is appreciated! Thanks.

> You could also consider using css positioning
techniques. By using
> absolute
> positioned elements, Dreamweaver calls them 'layers',
you can achieve the
> same
> effect. Gooling will reveal plenty of tutorials for
using this approach.
You can achieve this effect without using absolute
positioning. DW versions
earlier than CS3 required the AP for the show/hide UI to find
the element.
DWCS3 does not.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Nick Barling" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> There are a number of ways in which you can create the
effect you
> describe.
>
> The technique is called a 'disjointed rollover' and
fairly easy to create
> on
> your own without being a JavaScript guru.
>
> I would recommend learning enough JavaScript to build
your own custom
> functionality because that way you know exactly what
your code is doing
> and you
> can also make use of the latest JavaScript coding
practices. However, to
> get
> you started you could use the built in functionality
within Fireworks, if
> you
> have it, to create your disjoined rollover. Once the
disjoined rollover
> is
> built you can publish an html page and the requisite
images and then
> manipulate
> the code within Dreamweaver. One warning about
Fireworks; the code
> generated
> is not the best and can be quite daunting when you try
and workout what is
> going on. I have used the CS3 disjointed rollover
functionality in
> Fireworks
> and I was disappointed not to see any improvement in the
way Fireworks CS3
> handles the code over Fireworks MX.
>
> There is a tutorial macrochat here that gives a rough
idea of how to
> achieve
> disjointed rollovers:
>
>
http://www.adobe.com/devnet/fireworks/articles/fw_macrochat.html
>
> As I said before though, I would recommend writing your
own more semantic
> JavaScript that uses the DOM approach and separates the
scripting from the
> html. A good book that covers several options is the
visual quick start
> guide,
> JavaScript and AJAX, Sixth Edition, by Negrino and
Smith. It is a good
> beginners guide and is full of great examples of common
JavaScripting
> techniques. You can also 'Google' for lots of online
tutorials for
> disjoined
> rollovers.
>
> You could also consider using css positioning
techniques. By using
> absolute
> positioned elements, Dreamweaver calls them 'layers',
you can achieve the
> same
> effect. Gooling will reveal plenty of tutorials for
using this approach.
>
> regards
>
> Nick Barling
> www.barkingweb.com
>

Mouse over text is incorrect

Hello,
I'm not sure what is happening, but when I place the cursor over a link on a web page the text is incorrect. For instance, in the picture below, when I hold the cursor over the Google image, the text ebay shows up. I've run a virus scan and the only thing it found was some quarantined phising emails, and messages with trojans in them. I deleted these, and reset safari, but it hasn't helped. Any thoughts?
Thanks

Quit Safari.
Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder.
Move the cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari.

While using firefox, when mouse over link causing monitor to crash

Windows 7; Dell studio xps
On mouse over a link/photo link and/or click on a link and my monitor goes into standby mode. Monitor still on (as is my computer) but cannot reestablish visual on monitor. Have used Explorer in the past and never had this problem. This error happens almost every time when I perform an image search with Google then mouse over a resulting image.

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].

Mouse over of detailed navigation nodes?

Hello EP Development Gurus,
I am in need of displaying some text on the mouse over of the detailed navigation nodes. How can I achieve this? Where can i find the java script code relating to it?
Helpful answers will definitely be rewarded. please help me.
Thank you all in advance.
best regds,
Alagammai.

Hi Harish,
Thank you for your immediate reply.
I think even if I create a full paged iView, the navigation panel will be there.
I don't want the left side navigation inside the content area.
In the existing default navigation panel, i need to display some mouse-over text.
To be exact, I need the par file that contains the javascripting relating to the detailed navigation part. I checked in par files like <b>com.sap.portal.navigation.detailedtree</b> and <b>com.sap.portal.layouts.framework</b>. But no use. I am not able to find the relevant code there.
If I am not clear, please get back to me.
best regds,
Alagammai.
Message was edited by: Alagammai Arunachalam

Links visible over text

In mail messages I am getting more and more annoyed by the url's of links that show up. I get a yellow coloured rectangle with sometimes extreme long url's that show when I move the mouse over text with embedded links.
Is there someway to turn this off?
Thanx

I didn't say I don't want their links, I said I didn't want the url's visible in the yellow rectangle that shows up when I move the cursor over the links.
I posted the question on the Dutch Macworld forum where I was able to post an example:
http://macwereld.nl/index.php?option=commwforum&task=showpost&postid=66520#66520
Message was edited by: Bonneveu

I need to add text over a still photo in iMovie. Following directions that always worked before but not this time.

I am running OS 10.6.8, an upgrade that I did after Christmas. A couple of times a year, I need to make a video of my students' performances, and have always been able to add text over the still photos before, using the directions in iMovie "help." However, this time, I am not able to choose a title style; no amount of clicking makes anything show up on the selected still photo. And no amount of trying to choose the font style makes anything show up either.
This is iMovie 09; is it possible that it is not compatible with my OS upgrade?
I've been able to insert still photos into the video footage, but can't add any titles or acknowledgements. Thank you so much for your help! Since I only do this a couple of times a year, it always takes me forever to accomplish, which is why I printed off the Help directions to follow.

just to make thing clear (sorry for sounding impudent!)
you do .... :
create a New Project
make a selection of an Event and add it to the Project
select a title and drag it onto the clip?
iM does work with your OS ...

Pop Up Text in an applet on mouse over event

Can anyone help me to design a pop up text message to be displayed in an applet on moving your mouse over a particular control. Plz. Its urgent

To show a pop-up use javax.swing.Popup. Add a mouse listener to button. When mouse enters the button pop-up shows and when mouse exited the button, pop-up disappears. This pop-up is capable of displaying simple message to any swing component. Sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
* @author mrityunjoy_saha
* @version 1.0
public class AppletWithPopup extends JApplet {
    private Popup popup;
    private JButton button;
    private JLabel message;
    @Override
    public void init() {
        setLayout(new FlowLayout());
        button = new JButton("Hello");
        message = new JLabel("This is a JLabel. It can be any swing component.");
        button.addMouseListener(new MyMouseListener());
        add(button);
    private class MyMouseListener extends MouseAdapter {
        @Override
        public void mouseEntered(MouseEvent e) {
            System.out.println("Mouse entered.");
            PopupFactory factory = PopupFactory.getSharedInstance();
            popup = factory.getPopup(AppletWithPopup.this, message, (int) button.getLocationOnScreen().
                    getX() - 20, (int) button.getLocationOnScreen().getY() + 40);
            //popup = factory.getPopup(AppletWithPopup.this, message, 50, 10);
            popup.show();
        @Override
        public void mouseExited(MouseEvent e) {
            System.out.println("Mouse exited.");
            if (popup != null) {
                popup.hide();
}If you are talking about alert box (where some message can be displayed), in above example instead of javax.swing.Popup use javax.swing.JOptionPane. In case you are using JOptionPane, make it visible in mouseEntered() method and hide it in mouseExited() method.
Thanks,
Mrityunjoy

Meta text not showing on mouse over

Certain sites (such as [http://xkcd.com/789/]) use meta text to add more information, etc. when you run the mouse over the picture. This feature isn't working for me.

Do those image have a title attribute?
Firefox only displays a tooltip with the ''title'' attribute and not with the ''alt'' attribute that is meant to show descriptive text in case the image can't be displayed.
Popup ALT Attribute: https://addons.mozilla.org/firefox/addon/1933
Tooltip Plus: https://addons.mozilla.org/firefox/addon/11481

Behaving erratically when mousing over the text

Hi all,
I have a very strange problem. I am trying to do a simple photo-gallery using edge animate without using the timeline as much as possible.
Let's say I have a thumbnail, and I want to mouse over the thumbnail and it goes semitransparent and a text pops up.
Now, what I had done is I have gone to the compositionready and set the codes to sym.$("caption1_txt").hide(); to hide the text. Next, I have gone to the mouseOver and set the codes to
sym.$("thumb1").animate(
"opacity":"0.2"
}, 500
to set the opacity to 20% for the thumbnail. And then I set the text caption to show like so :
sym.$("caption1_txt").show();
Conversely, I have gone to mouseOut and do the reverse as shown :
sym.$("thumb1").animate(
"opacity":"1"
}, 500
sym.$("caption1_txt").hide();
The strange thing happens when I mouseover the text, it seems to flicker repetitively. May I know how to solve this? It seems the program is trying to execute an event for the text block but there is none. Is there a way to nullify or 'ignore' the mouseover effect for the text?
Thanks, greatly appreciate!

Thanks for the prompt response again!
Yes, I realised I have to go to the symbols and then set that to %. Didn't know that can be done
Thanks heaps! It is working!
Another question, which I have posted in another post, I do have problems working with the jQuery animate() function. I have tred to implement CSS3 filters using the animate() function in jQuery but it does not seem to be working. I know presently only Chrome supports this sets of filter. An example of what I had done for the mouseOver handler :
sym.$("thumb1").animate(
"-webkit-filter":"sepia(100%)"
}, 250
Is there anything that is missing?
Thanks and greatly appreciate!

Add mouse-over text to photos in keynote '09

Similar Messages

Maybe you are looking for