Add multiple transitions on the timeline?

Is there a way to add multiple transitions on the timeline. I edit 200 clips to music and I need to add a transition (the same transition, a dissolve) between each clip. I cannot add the transition when I pull them from the bin because they need to be edited to a soundtrack first.

1. Select your video clips.
2. Disconnect the a1 & a2 tabs on your destination controls (left side of the timeline.)
3. Move your playhead to the beginning of your timeline, or at the start of the first clip that is selected.
4. Drag the selected clips to the Canvas and drop the clips on the overlay for Overwrite w/ Transition.
This will overwrite your video clips on your timeline with the same video clips but will add your default transition between each edit point.

Similar Messages

How do I add multiple songs to the iPod library at the same time?

Before the iTunes update, I was able to add multiple songs to the library. Now I must add one song at a time. How can I get enable my iTunes to allow me to "add file to library" with more than one song?

I use add folder option when adding more than one file. Never tried to add more than one file with the add file option. Long ago when I started with iTunes, I made a folder to use when importing files when I was not ripping in directly.

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Add multiple scans to the same pdf file scan at time of scanning

Hello, HP Officejet Pro 6830 How do I get it to add multiple scans to the same pdf file? I need to scan multiple documents and have them all end up in one pdf. Some may be double-sided and it is fine if I have to scan them individually. At present it will only do one scan or a double-sided scan then it wants to save the scan and not ask if there are any more pages. The only option is to save or not. Thank you.

After your first scan you need to click the + sign at the 7 o'clock position.

How to Add multiple entry to the group policy security filtering

How to Add multiple entry to the group policy security filtering
Is there any way we can add multiple entry to the Domain group policy Security filtering tab.Currently its not allowing to add more then one entry at a time.
Getting Error like "only one name can be entered,and the name cannot contain a semicolon.Enter a valid name"

Hi
Are you trying to add more users or groups through Group Policy Management Security Filtering tab?
Try right clicking on the policy and then edit
Then in Editor Right click on the name of the policy and Properties
Security tab and add user or group from this tab. Just make sure if you are adding user or groups "Select this object type" has
the correct option also "From this Location" is set to your entire directory not the local server.
Update us with the above.
Thanks

Please add the ability to add multiple folders to the assets folder in order to better organize large numbers of files.

Please add the ability to add multiple folders to the assets folder in order to better organize large numbers of files.

Hello KDLadage
Thank you for your recommendation. I understand the challenges of managing large numbers of files on the My Files page. I also understand the need to preserve project files.
Perhaps a compromise would be to create an Archive tab under My Files. Previous versions and retired project files could then be automatically moved into this holding area when a new version is published, thus preserving the files in a separate area that is still accessible to the author.
I will submit this suggestion to our product management team to consider as a future enhancement.

I can't drag a video transition into the timeline...a small x appears near the cursor

I can't drag a video transition into the timeline...a small x appears near the cursor

Sounds like you don't have enough handles.
http://www.fcpbook.com/Effects1.html

I have put several clips with transitions into the timeline in final cut pro. There are two clips which are followed by transitions which do not play at the right speed. It is extremely frustrating, can anyone help?

I have put several clips with transitions into the timeline in final cut pro X. There are two separate clips which are followed by transitions which do not play at the right speed. I'm at a loss as to why this is happening - any thoughts/help?

The two HD clips were purchased from itunes (MPEG - 4) and converted to .mov for use in Final Cut Pro. Project properties - 720p HD 1280x720 (60p)
Is this enough information?

Adjusting audio of multiple clips in the timeline simultaneously

Is there a way to adjust the audio volume of multiple clips in the timeline simultaneously?

Or you can send the whole things over to Audition and work in multitrack there.
I like to get everything edited in Prmiere and then send the audio (I never bother with a refernce video) to Audition for finish work. There you can apply effects to individual clips, individual tracks or the entire mix. I always put a hard limiter on the Master track at -3dB to prevent clipping. Since this is the last filter in the chain I can boost other clips first and still know that my audio will never be too loud

Why is it, if i have one video clip in the timeline, i can't just add a transition at the end of that solo clip to fade to black!?! please help!

hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!

Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

Unable to apply transitions in the timeline

Have copied 4 video clips into the timeline and am unable to create any video transitions between them. I have tried to selecting the area between the two. I am able to this, but when I try to use the Effects/video transitions/cross dissolve I get the message:
"There was insufficient media for the requested transition at one or more edit points. Would you like to accept the others?"
Video transitions worked without a hitch in my earlier versions of FCP?

I'm not having the same problem, but it's definitely not a handle/media problem. I can't even apply transitions to text clips... *or to a Through Edit* where I know there's continuous media. I've tried Command-T, dragging the transition icon from the Browser, copying and pasting, and right-clicking on the edit point and selecting "Add Transition... ".
I've also tried repairing permissions, trashing my preferences, starting a new project and moving all of the elements into the new project, and starting a new Sequence. NOTHING WORKS.
Please advise, thanks.
FCP 7.0.3 running on OS 10.6.8.

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

How do I add multiple songs to the iCloud at the same time?

I have several songs that are not getting matched to imatch and getting uploaded to the cloud. I tied highlighting all the songs that have a cloud with an x through it indicating that the song was deleted from the cloud and that it was not on any device. I can add it mannually, but only one at a time. How do I do this for hundreds of songs with a xcloud?

For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud."

How to add multiple tasks to the worklist view?

Hi,
We are creating a view based on our BPM process and we are using OBPM 11.1.1.4. We do have 2 human workflow tasks in the process.
While creating views in the worklist we are able to add only one task is there a way to add multiple tasks to one view?
Thanks a lot for the help in advance.

Hi Mikael,
First of all, which Project Server version do you use?
I'd like to be sure to correctly understand your concern. You would like to have more than 1 task list in your project site, am I right? I'm a bit confused since you talk about both project site and project center.
First notice that the default task list is related to the project Schedule, ie when a task is updated in the project, the list will be updated accordingly.
With Project Server 2013, I could open a project site, navigate to "site content", select the task app and create a new task list. This new list will be created as a blank list not related to the schedule neither the default task list.
Note that there is a list setting which triggers wheither or not the list link will be added to the navigation menu of the left side (list settings, List name, description and navigation).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Adding transitions in the timeline

Why would FCP not allow me to add a transition between 2 clips.
I have enough media to support the transition, but everytime
I drag it down, it's showing me an "X" in the transition I'm trying to move down.

It sounds like you are trying to put the wrong type of transition at on the wrong track. It happens if you try to put an audio trans on a video. Stuff like that. Probably something simple you over looked

Add multiple transitions on the timeline?

Similar Messages

Maybe you are looking for