Add name and page number to document

Is there a built in way to add your name and page number to each page in a pages document?

Hi Faynus! You can put it in the header or footer. Use Insert Page number in the menu. You need to have the insert point in the footer if you want it there. you can get the PAges User Guide by going to the menu > Help > Pages User Guide. YOu have the info about headers and footers there

Similar Messages

Can I print the File name and page number

When printing a file, I would like to print the File Name and the page number also...something like a header, in every page printed. Is this possible in Acrobat? Please advise.
Thanks

Sure. Did you look under Tools - Pages - Header & Footer ?

Why would Framemaker add an extra page to my document ?

Hi everyone,
I have a mif file here that is used to generate a ONE PAGE pdf and for a reason that I don't know, when I open this .MIF file in FRAMEMAKER, there is a second page using default masterpage that is automatically added by FrameMaker.
The .Mif file itself only specifies one BodyPage statement so I really don't know why FrameMaker adds an other page to the document.
So the question is : Why whould FrameMaker add a supplementary page to a document by itself ?
thanks for any information.
Alex

Thanks for the quick answer Van. I had a look to my document and it seems that the pagination is OK, I also thought that maybe I had some "TextRect" that took a little bit to much space but they seem OK too.
Now I'm trying to track every "TextFlow" to see if one of them is printing outside of my "TextRect" at the bottom of the page, that may cause FrameMaker to add a new page I guess.
Thanks again

Vendor name and Vedor number in FAGLL03

Hi All,
My Client is running report for GR/IR, T-code FAGLL03, they want to see Vendor name and Vendor number columns in the report. I searched forums and got the answer for Vendor number but not clear
My questions are
1. I added field LIFNR in BSEG table in the SPRO and am able to see the vendor colum. If I transport to Test system, will I be able to see the vendor column? (in forums some one mentioned that they are not able to see the vendor column when they transport to Test system) they have been asked to run this program BALVBUFDEL, So I am concerned about this issue and want to know exactly what are the things that need to be done, what programs have to be run before transporting to Test system?
Also we are using ECC 6.0 and the highest support package present in the system is SAPKGPAD15. So I dont think I need to install the OSS note 1034354, I checked the OSS note and the highest APPL level is 604? but just making sure about this Patch level and OSS note.
2. Second, how to get the Vendor name cloumn in the report?
Could someone give me solution? your help will be really appreciated.
Thanks,
Harter
Edited by: Harter21 on Nov 8, 2009 2:57 AM
Edited by: Harter21 on Nov 8, 2009 2:58 AM

Hi Sanjay,
Thanks for the reply. I understood that we get Vendor number from the Function module ITEM_STRUC_EXTENSION and when you run that FM it updates the vendor number in the Structure FAGLPOSYEXT. I want to have Vendor name side to Vendor number field. Can I get vendor name also from the same FM?
I have tried in BSIS table and other OSS notes that are mentioned in that forum link but none of the OSS notes mentioned about the Vendor name and the vendor name is coming from LFA1 table and that has no connection with FAGLL03 report as far as I understand (correct me if I am wrong).
If you have any idea please throw some light.
Thank you very much,
Harter.

How do i add a second page to a document in Pages 5.2.2

How do I add a second page to a document in Pages 5.2?

Hello jeddi17,
You can insert a page break with the Insert (menu) > Page Break.
Note if your typing overflows the first page, then a new page is automatically created.
Pages for Mac 5.0: Change the flow of text
http://support.apple.com/kb/PH15334
Force text to the next line or page
A line break, also called a soft return, starts a new line without starting a new paragraph. A page break moves the next line of text to the top of the next page.
Click where you want the break to occur.
Do one of the following:
For a line break: Press Shift-Return.
For a page break: Click Insert in the toolbar, then choose Page Break.
Take care,
Nubz

TA38622 how do you delete a contact name and phone number from this? i have deleted it from my regular contacts, but it remains in a text memory when i begin to type the beginning of a name

How do I delete a contact name and phone number from my texting memory? I have deleted this contact from my regular contact information; however when I text and begin to text a contact beginning with the 1st letter of the name I had deleted, it brings up the old, deleted contact information in my texting history only.

You would have to restore as new.

I have a question about extracting pages. When I do the function, adobe saves the individual files as " file name space page number ", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I a

I have a question about extracting pages. When I do the function, adobe saves the individual files as "<file name><space><page number>", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I am using excel to concatenate some data to dynamically build a hyperlink to these extraced files. It casues me problems, however, for the space to be the the file name. Is there any way to change the default behavoir of this function to perhaps use a dash or underscore instead of a space?

No, you can't change the default naming scheme. You can do it yourself if you extract the pages using a script instead of using the built-in command.

Replacing Host Name and Port number throughout Environments

So I am currently working on a project that have several classes using simple JDBC code. I'm switching all of it to use JNDI instead of what is currently being used. I'm using Weblogic and the plan is to have the code run in a cluster.
Here is a code Snippet of some of the code.
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://hostname:port");
My problem lies in the the "t3://hostname:port" String. I don't want to hardcode that since I know its bad code practice but my question is what is the best way to replace that with the Host Name and Port number as I move environments. Should I have a Class with a Static Variable and just reference that through the other classes or should I put it in some Property file and read the value from there? Any insight into this would be greatly appreciated.
Thank you.

would it be something like this?
Properties properties = new Properties();
          try {
     properties.load(new FileInputStream("src/jndi.properties"));
     String url = properties.getProperty("url");
     System.out.println(url );
     } catch (IOException e) {
     }

"File with specified name and version number already exists. Result code= -48." ...????

Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48." WHAT IS THE PROBLEM?????? It's making me furious!

Hi
As the message says, there is a file at the recording directory that has the same name:
http://support.apple.com/kb/ht1618
Try changing the name of the track (this sets the filename in later versions of Logic 9
CCT

How to find proc/func name from package name and line number?

Hi,
We are using the pl/sql call stack dump (dbms_utility.format_call_stack) for some debugging purposes. But in the case of a package body execution, the dump does not return the name of the procedure/function that is being executed, but only the name of the package and the line number being executed. So, we have a requirement wherein we need to extract the type and name of a package subunit from the package name and line number.
e.g.
From the information package 'A', line number 739
we should be able to deduce that line 739 is a part of *'function A.f'*
Does the oracle database provide any native mechanism (PL/SQL packages or otherwise) to support such functionality? If it does not, how can we achieve the desired result?
Thanks in advance,
Shashank

The approach we are currently planning to take up is this :
1. Write PL/SQL code to parse the entire source (user_source) and build a database table with a structure like this :
PACKAGE_NAME | UNIT_TYPE | UNIT_NAME | START_LINE | END_LINE
=============================================
A | PROCEDURE | P1 | 20 | 345
A | FUNCTION | F1 | 347 | 629
etc..
2. Start PL/SQL package execution.
3. Keep dumping call stack snapshots whenever a custom debug procedure is called.
4. Dump the package name and line number to a log file.
5. Using the package name and line number, query the table built in step 1 and build the final report which shows the control flow in a readable form.
What we want is to get rid of step 5 and by some means get the logic to extract the unit type and name in step 4 itself.
Keep them coming..
Thanks and regards,
Shashank

Getting host name and port number from application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Getting host name and port number from an application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Aperture keeps asking for my name and serial number

Aperture keeps asking for my name and serial number, but only on one of my Macs. This is a new Mac that I restored from my old Mac. It made sense to have to put in the documentation the first time, but the program keeps asking for it. Any thoughts?

Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise the serial number cannot be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library; this requires read/write access for administrators. Do you enter your serial number using an administrator account?
SInce you migrated your system from another mac, you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppsSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see ProAppsSystemID there, move it to its proper location in /Library/Application Support/ProApps.
Aperture must be running, and you will have to wait a few minutes to be seeing the file appearing the /tmp directory.
Regards
Léonie

Need dissociation street name and street number from one column?

Hi all,
I have one table A with one column with Street name and street number.
And I was adding second column and now need update this second column with street number
and delete street number from first column.
How can unpluging street name and street number from one column?
(street name are 90% char, number is 100 numeric, in 10% street name name
starts with number (1.HEROES 223, 1.HEROES 224...)
Gordan

Hi,
Solution of Mr. Wijk come first, however I like to post (it's very similar and incomplete, I know...). Supose you have a table call address (use position -1 like Mr. Wijk to look backward). It's better in cases like '1.My Street 123' (the space before the number is very important)
SELECT substr(a.street_name,
              1,
              instr(a.street_name,
                    -1) - 1) street_name,
       substr(a.street_name,
              instr(a.street_name,
                    -1) + 1) street_number
FROM address a;Regards,

Procedure to display the employee name and employee number

Dear All
can any one has the procedure to display the employee name and employee number from per_all_people_f.
Regrads
xyz

can any one has the procedure to display the employee name and employee number from per_all_people_f. https://forums.oracle.com/forums/search.jspa?threadID=&q=per_all_people_f+AND+last_name+AND+employee_number&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Add name and page number to document

Similar Messages

Maybe you are looking for