Add Network process pattern error

Hello,
I am setting up a lab environment to test the CIAC Starter Edition 3.0.1 and have been working on the products for monthes now.
When I run the "Add Network" query, I get this error near the end of the process:
The remote server returned an error: (500) Internal Server Error.
<nsapi-error-response>Internal Error: Illegal pattern character 'j'</nsapi-error-response>
Here is the global execution view:
And the error box:
Has any of you ever seen such an error? It ends the process and no network is created.
Thanks by advance.
David

Hello,
I had heard that the Starter Edition was not compoatible with Windows "locales" other then US.
I made my portal installation on a US Windows 2008 R2, under US locales, but the system was provisioned from a template where initial locales where "french".
So the system was under french and the admin user (me) under US.
I tried to launch the RC and SL services manually from the cmd scripts instead of running them as services:
it solved my problem.
So be careful, no-US citizens! Even the system locales of your OS must be US!
Best Regards
David

Similar Messages

Can't add network printer to my PC

I have an HP Color LaserJet 2605dn connected thru a USB port to a 5-year old computer running XP Home Edition with SP-2. The printer is designated a shared computer. I also have a Linksys wireless home network that operates flawlessly in every respect except for the problem below.
When I try to add the printer to my new HP Pavilion running Vista Home Premium with SP-1 (64-bit), I get a message saying the server for the printer does not have the correct printer driver installed. When I pursue the "add printer" process to the bitter end, I get a Printer driver setup error (error Ox800f0214).
Can anyone tell me the name of the driver file that is missing, where I can find it, and how I can install it?

ON the Vista Home Premium x64 system go to Control Panel -->Printer --> select add printer and select network printer. Stop there. Now Click on the driver you downloaded from here. Once you begin the install with the exe file the wizard(that is already running) should see the driver and install it. Alternatively you could browse for it with \\computername\printername (substituting your own relevant network names for the devices)
Have you tried physically moving it and installing the printer at the x64 system and then phyically moving it back to the other system where you already have it installed? I know that beast is heavy.
Another option; Use universal extractor and extract the drivers from the.exe files. Then you can easily see which one will work when you extract themto a folder and browse there when you add the printer and the location of the driver is needed.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Web-Disk on OSX 10.9 Give me this error: "Finder got an error: Network file permission error."

Previously I was using OSX 10.8 and Web Disk was working great.
Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
FInder got an error: Network file permission error.
When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
And I did:
To force all connections to be SMB1:
Open A terminal window
paste in the following line followed by the return key(should be all on one line):
echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
What the command does:
Creates a file called nsmb.conf in your home directory at the path ~/Library/Preferences/nsmb.conf.
Adds directives to force SMB connections to use the SMB1 protocol. This is slower but stable.
Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
FInder got an error: Network file permission error
After trying 100 times it attaches 1 time but then show this ERROR:
Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
Now Im stuck How can I solve this? All help is highly appericated..
Thank you so much...

Hi,
Make sure to chmod the app, something like this :
chmod -Rf 777 secure_site_WebDisk.app
(in my case the CPanel provided the app for my OSx version.)

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

"Network host busy" error

Hi, everyone. I have trawled this discussion list and followed all the advice available to no avail. Any help would certainly be appreciated.
The background is as follows:
MacBook Pro, 2.33GHz Intel Core 2 duo, 2GB RAM, currently running OSX 10.6.2. Software up to date. Previously on OSX 10.4.11 until 4 weeks ago. Printing to a networked HP 4100 with a fixed IP address in the office worked fine until last week, when a "Network host busy error, trying again in 30 seconds" error arose. Printing from the other workstations (iMacs on 10.6.2) on the network continues to proceed normally. Steps I have taken include deleting the HP4100 print queue and re-installing (several times) as IP>HPJetDirect socket to 192.168.1.100. Clearly the printer is online (it says so) and is identified as the correct printer driver is selected automatically (HP LaserJet 4100 series v 3010.107) and all the configurable options are correctly selected (trays 2,3 & 4, envelope feeder and duplex option) and toner supply levels are correctly read. Still get network host busy error. Rebooted the printer. No avail. Rebooted the router. No avail. Reinstalled HP printer drivers from here: http://support.apple.com/downloads/#printer%20drivers%20mac%20os%20x%20v10.6. No avail. Have also reset the printing system (losing all the other print queues in the process!) to no avail. Checked the printer setup on the iMacs that can print, and it is identical to that which I am attempting to install. Have I missed something? Anyone with any clues, please?

Hi there,
If you have your HP printer queue configured exactly the same as other Mac's that are working fine, and with all the steps you have taken thus far, then I can only suggest that you either have a network issue or something blocking the path.
So first thing is to check that you are set to the same subnet as the other Mac's. This can be confirmed via the Network Utility under the Info pane. You may have to change the drop menu from Ethernet (en0) to Airport (en1) depending on what you use. Typically the first three sets of numbers of your IP address is your subnet, while the last number is your network address. So, based on the printers address of 192.168.1.100, your Mac should have a subnet of 192.168.1 and a network address other than 100.
If the IP address for your Mac is set to the same subnet as the HP then while Network Utility is still open, select the Ping tab, enter the IP address of 192.168.1.100, set the number of Pings to 4 and press the Ping button. You should get a response from the printer.
If you do get a response then it is safe to assume that the network setup on your Mac is okay. At this stage I would check that your Firewall is disabled (located in System Preferences > Security).
If the firewall is not enabled then my last suggestion is to create another printer queue to the HP, this time selecting IP > LPD for the protocol. Since HP wrote Socket then it is odd that it would not be working, but a network host busy would indicate that the Mac cannot either communicate with the IP address or the Port of the selected IP address. By changing the protocol from HP Socket to LPD you are basically setting the Mac to connect on port 515 instead of 9100.
Note that if the other Mac's show the print queue URL as "socket://192.168.1.100/" then they are using HP Jetdirect also so it would make no sense that your connection to the same port would fail. But it can't hurt trying an alternate protocol when you have tried everything else...
HTH and reply if needed.
Pahu

Windows 8.1 Network Share 0x8007003b Error Copying Files

Hi All,
I'm having an issue when copying files from a Windows network share. If the file is above 5MB it will start copying and then after a minute or two I will get an error such as:
Interrupted Action
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x8007003B: An unexpected network error occurred.
The network share is in a different office and is accessible over a point-to-point VPN, so the connection is not that fast.
But before everyone tells me to start diagnosing the router and or VPN please take note of the following:
My colleague who is running Windows 7 can copy files from the network share fine
If I run a Windows 7 VM on my Windows 8.1 laptop I can copy the files across fine
I also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client
VMs to a similar speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
There is also a noticeable difference visually when copying using Windows 8.1 and Windows 7:
Windows 7 - The progress bar progresses smoothly giving the current speed and estimated time remaining
Windows 8.1 - The progress bar progresses in a jumpy fashion. E.g. it shows no progress, then after a minute it jumps and shows 16% progress, then shows no further progress, then jumps by another 18%. There is no estimated time remaining.
I ran Wireshark to investigate what was going on at the network layer. I see the following behaviour:
Windows 8.1 - The file is copying fine then all of a sudden there are a lot of TCP dupack packets. After which the Windows 8.1 client sends a RST packet and then the error pops up.
Windows 7 - The file is copying fine then you also see a load of TCP dupack packets, however no error is displayed and it continues copying fine.
I'd appreciate any help with this I'm hoping there are some settings I can change to make Windows 8.1 behave more like Windows 7!
FYI originally posed here (but was advised to ask on Technet) - https://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-81-network-share-0x8007003b-error-copying/300bc9a4-597b-402a-b885-9dd6f6fb51a2
Thanks,
Zak

Hi MeipoXu,
Sorry, it has taken me so long to reply. I thought I had subscribed to receive updates on this thread, but I didn't see anything!
I've ran the commands you gave but some of them did not work, I got the following error:
Set global command failed on IPv4 The parameter is incorrect.
However, output of current settings are below.
TCP Global Parameters
Receive-Side Scaling State : disabled
Chimney Offload State : disabled
NetDMA State : disabled
Direct Cache Access (DCA) : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
Initial RTO : 3000
Receive Segment Coalescing State : disabled
Non Sack Rtt Resiliency : disabled
Max SYN Retransmissions : 2
To answer your original questions.
Do you mean the file below 5 MB will copy fine ?
5MB is not a hard limit. If the file is small enough it will copy before it errors out. A file of around 5MB or so fails with an error.
Have you tried to copy the files from another Windows 8.1 machine (This will help us to verify whether the issue is casued by the specific machine)?Have you tried to copy another file from the network share to have a check ?
Yes I've tried from another Windows 8.1 machine and have the same behaviour. It is the same with different files from the network share. And the same with different network shares.
I am seeing nothing in the event viewer when the error occurs. I do not believe this to be a VPN issue because I can recreate this situation perfectly. As I mentioned in the original post- I
also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client VMs to a similar
speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
Basically, I had virtual machines all on the same local network. One virtual machine was hosting a file share with files on it. I created one Windows 7 VM and one Windows 8.1 VM. Using VMWare Workstation you can limit the network bandwidth to the VMs. When
I did not limit the network bandwidth I could copy all files of all sizes fine. However, when I limit the network bandwidth to a speed of around 30-50KBps, the Windows 8.1 VM fails to copy files with the same error. But Windows 7 VM copies the files fine.
The point of limiting the bandwidth in this way is to create a similar scenario to that I see when connecting over the VPN.
This all leads me to believe there is some sort of issue with copying files from fileshares over slow connections using Windows 8.1.
Cheers,
Zak

Process Flow Error

I ran into a problem with one of my process flows, within my staging area. I have not had this problem before. My process flow looks as follows:
--- > Map2
--- > Map3
--- > Map4
Map1 --- > Fork --- > Map5 --- > AND --- > Map 9 --- > Map10 --- > Map11 …
--- > Map6
--- > Map7
--- > Map8
Mappings 1 through 8 ran successfully and populated their staging tables. The process flow showed success of mappings 9 through 16 (the last one) and successful completion of the process flow. However Mapping 9 was still extracting data and had not yet loaded its staging table. I was watching the execution in OEM. Mappings 10 through 16 did not execute after completion of Mapping 9.
This is a weekly large data load into our data warehouse so I will not be able to run this process flow again until this weekend. Map 9 was running with a degree of parallelism of 16, if it matters, and did not fail.
Has anyone run into this issue before?
Thanks.
Scott

user10483084 wrote:
I ran into a problem with one of my process flows, within my staging area. I have not had this problem before. My process flow looks as follows:
--- > Map2
--- > Map3
--- > Map4
Map1 --- > Fork --- > Map5 --- > AND --- > Map 9 --- > Map10 --- > Map11 …
--- > Map6
--- > Map7
--- > Map8
Mappings 1 through 8 ran successfully and populated their staging tables. The process flow showed success of mappings 9 through 16 (the last one) and successful completion of the process flow. However Mapping 9 was still extracting data and had not yet loaded its staging table. I was watching the execution in OEM. Mappings 10 through 16 did not execute after completion of Mapping 9.
This is a weekly large data load into our data warehouse so I will not be able to run this process flow again until this weekend. Map 9 was running with a degree of parallelism of 16, if it matters, and did not fail.
Has anyone run into this issue before?
Thanks.
Scottperhaps there's an error at MAPPING before MAPPING10, but it's not detected
I suggest you to add 2 transitionto COMPLETE ERROR and COMPLETE WARNING
from MAP1; AND; MAP9, MAP10, MAP11, ...
and fill the transition; enumerate ERROR for ERROR, enumerate WARNING for WARNING,
and the other line; enumerate SUCCESS
--- > Map2
--- > Map3
--- > Map4
Map1 --- > Fork --- > Map5 --- > AND --- > Map 9 --- > Map10 --- > Map11 …
--- > Map6
--- > Map7
--- > Map8
so you can know what MAPPING that doesn't success, and you can test it manually with control center, to know the error message
Thanks

Processing Pattern Example not working?

I am trying to run the Processing Pattern example for the first time. I'm using the .cmd files provided with the example.
The server starts up without error and its logs show loading some Processing Pattern TaskProcessor classes:
2010-09-28 14:30:47.616/4.839 Oracle Coherence GE 3.5.2/463 <Info> (thread=Thread-4, member=1): Starting dispatcher Task Dispatcher Class:com.oracle.coherence.patterns.processing.dispatchers.AbstractDispatcher
2010-09-28 14:30:47.632/4.855 Oracle Coherence GE 3.5.2/463 <Info> (thread=SimpleEventDispatcher:Thread-2, member=1): DefaultTask Processor Definition Manager starting Class:com.oracle.coherence.patterns.processing.internal.task.DefaultTaskProcessorDefinitionManager
2010-09-28 14:30:47.632/4.855 Oracle Coherence GE 3.5.2/463 <Info> (thread=Thread-4, member=1): Starting dispatcher Local Dispatcher Class:com.oracle.coherence.patterns.processing.dispatchers.AbstractDispatcher
2010-09-28 14:30:47.632/4.855 Oracle Coherence GE 3.5.2/463 <Info> (thread=ReplicatedCache:ReplicatedServiceForProcessingPattern:EventDispatcher, member=1): Registering TaskProcessorDefinition TPD:{Identifier{GridTaskProcessor},Grid Task Processor,GRID} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$1
2010-09-28 14:30:47.663/4.886 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:DistributedServiceForProcessingPattern:EventDispatcher, member=1): TaskProcessorMediator inserted TPSK:{Identifier{GridTaskProcessor},1} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$2
2010-09-28 14:30:47.663/4.886 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:DistributedServiceForProcessingPattern:EventDispatcher, member=1): TaskProcessorMediator inserted TPSK:{Identifier{SingleTaskProcessor},0} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$2
2010-09-28 14:30:47.679/4.902 Oracle Coherence GE 3.5.2/463 <Info> (thread=ReplicatedCache:ReplicatedServiceForProcessingPattern:EventDispatcher, member=1): Registering TaskProcessorDefinition TPD:{Identifier{SingleTaskProcessor},Single Task Processor,SINGLE} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$1
However, when I attempt to run the example I'm getting a runtime error:
"C:\Java\jdk1.5.0_14"\bin\java -Dtangosol.coherence.clusterport=COH_OPTSCLUSTER_PORT -Dtangosol.coherence.cacheconfig=coherence-processingpattern-cac
he-config.xml -Dtangosol.pof.config=file:/C:\temp\coherence-incubator-examples-1.1.1.14471\resource\processingpattern\examples-pof-config.xml -Dtangos
ol.coherence.log=C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\log\PiCalculationSample-9001.log -Dtangosol.coherence.cacheconfig=C:\temp\coh
erence-incubator-examples-1.1.1.14471\resource\processingpattern\processing-cache-config.xml -Dtangosol.coherence.distributed.localstorage=false -cp C
:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-common-1.6.1.14470.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\li
b\coherence-commandpattern-2.6.1.14471.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-functorpattern-1.3.1.14471.jar;C:\tem
p\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-messagingpattern-2.6.1.14471.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\
..\lib\coherence-pushreplicationpattern-2.6.1.14471.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-processingpattern-1.2.1.
14471.jar;"C:\tools\Coherence-3.5.2"\lib\coherence.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\classes -Xms256m -Xmx256m com.oracle.c
oherence.examples.incubator.processingpattern.task.PiCalculationSample
Testing PI calculation
Using the Incubator Extensible Environment for Coherence Cache Configuration
Copyright (c) 2010, Oracle Corporation. All Rights Reserved.
java.lang.RuntimeException: Storage is not configured
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.addMapListener(DistributedCache.CDB:59)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.addMapListener(DistributedCache.CDB:1)
at com.tangosol.coherence.component.util.SafeNamedCache.addMapListener(SafeNamedCache.CDB:12)
at com.tangosol.coherence.component.util.SafeNamedCache.addMapListener(SafeNamedCache.CDB:47)
at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.<init>(DefaultProcessingSession.java:218)
at com.oracle.coherence.examples.incubator.processingpattern.task.PiCalculationSample.executeSample(PiCalculationSample.java:75)
at com.oracle.coherence.examples.incubator.processingpattern.task.PiCalculationSample.main(PiCalculationSample.java:56)
The server log shows an error also after I attempt to run the example:
*2010-09-28 14:32:54.322/131.545 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:DistributedServiceForProcessingPattern, member=1): Service DistributedServiceForProcessingPattern joined the cluster with senior service member 1*
*2010-09-28 14:32:57.740/134.963 Oracle Coherence GE 3.5.2/463 <Info> (thread=ClientLeaseCoordinator:Thread-5, member=1): Restarting NamedCache: coherence.patterns.processing.taskprocessormediator*
*2010-09-28 14:32:58.614/135.837 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
*2010-09-28 14:33:06.232/143.455 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
*2010-09-28 14:33:13.850/151.073 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
*2010-09-28 14:33:21.452/158.675 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
*2010-09-28 14:33:29.054/166.277 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
*2010-09-28 14:33:36.656/173.879 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
*2010-09-28 14:33:44.258/181.481 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
*2010-09-28 14:33:51.766/188.989 Oracle Coherence GE 3.5.2/463 <Error> (thread=PacketListenerN, member=1): Stopping cluster due to unhandled exception: com.tangosol.net.messaging.ConnectionException: Unable to refresh sockets: [UnicastUdpSocket{State=STATE_OPEN, address:port=10.100.153.51:8088}, MulticastUdpSocket{State=STATE_OPEN, address:port=224.3.5.2:8087, InterfaceAddress=10.100.153.51, TimeToLive=4}, TcpSocketAccepter{State=STATE_OPEN, ServerSocket=10.100.153.51:8088}]; last failed socket: MulticastUdpSocket{State=STATE_OPEN, address:port=224.3.5.2:8087, InterfaceAddress=10.100.153.51, TimeToLive=4}*
*     at com.tangosol.coherence.component.net.Cluster$SocketManager.refreshSockets(Cluster.CDB:91)*
*     at com.tangosol.coherence.component.net.Cluster$SocketManager$MulticastUdpSocket.onInterruptedIOException(Cluster.CDB:9)*
*     at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:33)*
*     at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)*
*     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)*
*     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)*
*     at java.lang.Thread.run(Thread.java:595)*
Caused by: java.net.SocketTimeoutException: Receive timed out
*     at java.net.PlainDatagramSocketImpl.receive0(Native Method)*
*     at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)*
*     at java.net.DatagramSocket.receive(DatagramSocket.java:712)*
*     at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)*
*     at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)*
*     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)*
*     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)*
*     at java.lang.Thread.run(Thread.java:595)*
Has anyone had similar experiences? Any advice to help me understand and get this going would be appreciated.
Thanks !!

I have same problem.
Midi trigger patern correctly. When trying idividual souds, it works but running sequencer do not trigger sound.
HW MacBook Pro (model 2008)
Soudcard: MOTU 828, M-Audio ozonic, internal speaker
Midi: Korg nanoPad, Roland Fantom, m-audio Ozonic,
I invesigate and i found out this:
1)
When open MainStage and automaticaly load Concert, pres midi key - no sound
Then I close just concert not MainStage, open recent concert (same), press midi key - seq playing, soud works
2)
Switch of automatic loading last opened Concert, quit and start MainStage, open Concert manualy and no sound.
Close concert, open again, soud works
3)
Switch automatic concert loading on, open MainStage - no sound
Open preferences, audio / change buffer size, hit applay - sound works
4)
Setup previous buffer size, change routing to buffer
Restart MainStage, no sound, change routing back to output - no sound
Change audio driver to System Setting - sound works - system setting goes to same soundcard
Restart MainStage - no sound
Change system sound output to Internal Speaker - no sound
Change system sound output to soundcard - sound works
5)
Preferences - change audio to System settings, switch off I/O Safety Buffer - below Buffer Size setting
Restart Mainstage - SOUND WORKS
Restart MainStage again - SOUD WORKS

Network message format error on Site Studio Designer

Hi all,
I am facing a very wierd issue in Site Studio. I have enabled accounts on the content server. When i use the content server User interface, i can check in any content using the standard check in form with or without specifying the account for it. In the case of Site Studio Designer, when i try to create a new asset/ content( basically check in anything) , it checks in the content successfully when the account metadata field is left blank. If the account field is specified, it gives me an error sayin :
Failed to check in file from location "".
(Network message format error).
When i checked the content server logs, it says:
The request was not processed by the Service handler because of a protocol error.
The request headers parsed from the request are:
{HTTP_USER_AGENT=Site Studio Designer, REQUEST_METHOD=POST, IdcAuthChallengeType=http, SERVER_NAME=punitp97194d.ad.infosys.com, SERVER_SOFTWARE=Apache/2.2.2 (Win32), HTTP_CGIPATHROOT=/idc/idcplg, HTTP_HOST=punitp97194d.ad.infosys.com, GATEWAY_INTERFACE=CGI/1.1, REMOTE_ADDR=10.76.135.190, SERVER_PROTOCOL=HTTP/1.1, SERVER_PROTOCOL_TYPE=NONE, IDC_REQUEST_AGENT=webserver, REMOTE_HOST=10.76.135.190, HTTP_CONNECTION=Keep-Alive, SERVER_PORT=80, HTTP_COOKIE=viscnt=3; IntradocLoginState=1; IdcTimeZone=Asia/Calcutta; IdcLocale=English-US; IntradocAuth=Internet, CONTENT_TYPE=text/hda, CONTENT_LENGTH=617, IDC_REQUEST_CTIME=1250602911, HTTP_INTERNETUSER=eBiz_Designer, SCRIPT_NAME=/idc/idcplg, PATH_TRANSLATED=D:/oracle/ucm/server/weblayout/idcplg}
Network message format error. Unable to parse browser environment or content item. Unable to parse properties. Name-value pairs are missing an '='. Unable to parse properties. Name-value pairs are missing an '='. [ Details ]
An error has occurred. The stack trace below shows more information.
!$The request was not processed by the Service handler because of a protocol error.<br>The request headers parsed from the request are:<br>{HTTP_USER_AGENT=Site Studio Designer\, REQUEST_METHOD=POST\, IdcAuthChallengeType=http\, SERVER_NAME=punitp97194d.ad.infosys.com\, SERVER_SOFTWARE=Apache/2.2.2 (Win32)\, HTTP_CGIPATHROOT=/idc/idcplg\, HTTP_HOST=punitp97194d.ad.infosys.com\, GATEWAY_INTERFACE=CGI/1.1\, REMOTE_ADDR=10.76.135.190\, SERVER_PROTOCOL=HTTP/1.1\, SERVER_PROTOCOL_TYPE=NONE\, IDC_REQUEST_AGENT=webserver\, REMOTE_HOST=10.76.135.190\, HTTP_CONNECTION=Keep-Alive\, SERVER_PORT=80\, HTTP_COOKIE=viscnt=3; IntradocLoginState=1; IdcTimeZone=Asia/Calcutta; IdcLocale=English-US; IntradocAuth=Internet\, CONTENT_TYPE=text/hda\, CONTENT_LENGTH=617\, IDC_REQUEST_CTIME=1250602911\, HTTP_INTERNETUSER=eBiz_Designer\, SCRIPT_NAME=/idc/idcplg\, PATH_TRANSLATED=D:/oracle/ucm/server/weblayout/idcplg}<br>--------------<br>Network message format error.!csUnableToParseBrowserEnvironment!syUnableToParsePairs!syUnableToParsePairs
intradoc.data.DataException: !csUnableToParseBrowserEnvironment!syUnableToParsePairs
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:187)
Caused by: java.io.IOException: !syUnableToParsePairs
     at intradoc.serialize.DataBinderSerializer.readProperties(DataBinderSerializer.java:625)
     at intradoc.serialize.DataBinderSerializer.parseProperties(DataBinderSerializer.java:601)
     at intradoc.serialize.DataBinderSerializer.parseReaderData(DataBinderSerializer.java:493)
     at intradoc.serialize.DataBinderSerializer.parsePost(DataBinderSerializer.java:1806)
     at intradoc.serialize.DataBinderSerializer.parseRequestBody(DataBinderSerializer.java:1065)
     at intradoc.data.DataSerializeUtils.parseRequestBody(DataSerializeUtils.java:112)
     at intradoc.server.ServiceManager.init(ServiceManager.java:128)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:167)
Please advice.
Thanks in advance,
Nithya

The config .cfg entries are:
<?cfg jcharset="UTF8"?>
#Content Server System Properties
IDC_Name=EBIZ
IdcProductName=idccs
SystemLocale=English-US
InstanceMenuLabel=EBIZ
InstanceDescription=STAGING SERVER
SocketHostAddressSecurityFilter=*.*.*.*
#Database Variables
IsJdbc=true
JdbcDriver=oracle.jdbc.OracleDriver
JdbcConnectionString=jdbc:oracle:thin:@localhost:1521:EBIZ
JdbcUser=EBIZ_admin
JdbcPassword=ZS5CtJYdpcn2mEVqKVQAZ7LKQqacsT+XLnX3PZ/EKqo=
JdbcPasswordEncoding=Intradoc
DatabasePreserveCase=true
#Internet Variables
HttpServerAddress=punitp52975d.ad.infosys.com
MailServer=192.168.170.26
SysAdminAddress=[email protected]
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=
WebProxyAdminServer=true
#General Option Variables
IsOverrideFormat=false
DownloadApplet=false
MultiUpload=false
IsAutoNumber=true
EnableDocumentHighlight=false
EnterpriseSearchAsDefault=false
IsJspServerEnabled=false
JspEnabledGroups=
#Additional Variables
UseAccounts=True
IdcAdminServerPort=4440
SearchIndexerEngineName=DATABASE.FULLTEXT
IntradocServerPort=4444
DatabaseType=oracle
WebServer=apache
and httpd.conf entries are:
LoadModule IdcApacheAuth C:/Oracle/ucm/server/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB EBIZ "C:/Oracle/ucm/server/data/users/userdb.txt"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity EBIZ
</Location>
<Location "/">
IdcSecurity EBIZ
</Location>
EBIZ is our content server instance name.
Thanks and Regards,
Nithya

Question on Processing Pattern Sessions - not behaving as expected

I have implemented some schedulable jobs in my extensible cache configuration that are scheduled at a fixed rate and then use the processing pattern to submit work to the grid.
However I am seeing some unexpected behaviour which does not seem to make much sense. My jobs are submitted to the grid as follows (some code edited for brevity):-
@Override
     public void run() {
          ProcessingSession session = null;
          try {
          session = new DefaultProcessingSession(StringBasedIdentifier.newInstance("MySession"));
          SubmissionOutcome outcome = session.submit(this, new DefaultSubmissionConfiguration(),
     new TaskSubmissionCallback(taskName));
          catch (Throwable t) {
               log.error("Failed to Submit Process Pattern Task [{}] For Session [{}]", taskName, nodeName);
          finally {
               try {
                    session.shutdown();
               catch (Throwable t) {
                    log.error("[{}] Failed to Shutdown Processing Pattern Session [{}]", this, nodeName);
My tasks get scheduled and then submiited and executed in the grid. I am currently only running a single node through eclipse for testing.
But after the task has excecuted my TaskSubmissionCallback class gets invoked and the onDone() gets called and returns my result:-
public void onDone(Object oResult)
     log.debug("[{}] Submission done - Result = [{}]", m_sTaskName, oResult);
So all is working. However a couple of milliseconds later I see the following in the logs:-
2012-04-03 17:15:50.407/19.274 Oracle Coherence GE 3.6.0.4 <Error> (thread=DistributedCache:DistributedServiceForProcessingPatternSubmissionResults:EventDispatcher, member=1): The following exception was caught by the event dispatcher:
2012-04-03 17:15:50.407/19.274 Oracle Coherence GE 3.6.0.4 <Error> (thread=DistributedCache:DistributedServiceForProcessingPatternSubmissionResults:EventDispatcher, member=1):
java.util.concurrent.RejectedExecutionException
     at java.util.concurrent.ThreadPoolExecutor$AbortPolicy.rejectedExecution(ThreadPoolExecutor.java:1760)
     at java.util.concurrent.ThreadPoolExecutor.reject(ThreadPoolExecutor.java:767)
     at java.util.concurrent.ScheduledThreadPoolExecutor.delayedExecute(ScheduledThreadPoolExecutor.java:216)
     at java.util.concurrent.ScheduledThreadPoolExecutor.schedule(ScheduledThreadPoolExecutor.java:366)
     at java.util.concurrent.ScheduledThreadPoolExecutor.execute(ScheduledThreadPoolExecutor.java:438)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.removeCacheObjectsAsynch(DefaultProcessingSession.java:313)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.handleResultChange(DefaultProcessingSession.java:288)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession$1.onMapEvent(DefaultProcessingSession.java:204)
     at com.tangosol.util.MultiplexingMapListener.entryUpdated(MultiplexingMapListener.java:42)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:557)
     at com.tangosol.coherence.component.util.SafeNamedCache.translateMapEvent(SafeNamedCache.CDB:7)
     at com.tangosol.coherence.component.util.SafeNamedCache.entryUpdated(SafeNamedCache.CDB:1)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap$ProxyListener.dispatch(PartitionedCache.CDB:22)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap$ProxyListener.entryUpdated(PartitionedCache.CDB:1)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.coherence.component.util.CacheEvent.run(CacheEvent.CDB:18)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onNotify(Service.CDB:26)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Thread.java:619)
I have managed to solve this by removing the session.shutdown() call in the class that submits the job for processing using the Processing Pattern. However this seems odd to me
as the submitter should not need to hang around until the job completes (as that is surely the point of the Callback handler). I can of course code around this by having a Singleton
class which keeps the Processing session alive constantly and stores this in the Environment. But the question is why ???
This is running Coherence 3.6 and coherence-processingpattern-1.3.423238.
Would be grateful to know if this is a bug or my understanding is somehow confused !
TIA
Martin

I agree, believe me. However, one goes to war with the army one has, not the army one wishes one had, to quote somebody who, um... okay, failed miserably. Hmm...
It's a flat-rate project, so the troubleshooting isn't costing them any more, and their IT department wags the rest of the company and won't buy stuff. Eventually they'll have CS4 and these problems will go away, but probably not until next year.
If I were willing to give up the CS4-specific features (which I'm not; maximum efficiency in long documents is the core competency of my business), working in CS3 still wouldn't be an option because I don't own it. I'm also not likely to be able to talk the client into the idea that I'll take care of the last-minute tweaks instead of their having to do it all.
(Keep in mind, too, that there's more behind the scenes than I'm necessarily sharing in a quick forum post. If I can keep the typesetting from shifting in the .inx for now, I'm good.)
I filed that bug report--thanks!
UPDATE: Client says it looks right. Off we go...

Could not enumerate processes (1) error=-1073738819

Hi guys,
I have deployed a WAR file on to my managed server.
While my managed server is up and running. and the application was deployed successfully and is in the active state, I am unable to test the application.
When i try to test the client url of the application, it gives me a "FORBIDDEN 403.....you do not have permission to access" error.
I checked the logs and this is what i got.
[WARN ][osal ] Could not enumerate processes (1) error=-1073738819
[WARN ][osal ] Could not add counter (null)\ for query
[WARN ][osal ] Failed to init virtual size counter
This is strange coz, I am able to deploy and test applications on other machines.
When I did some googling around, I found out that...the issue might have occurred due to some oracle provider might be disabled.
I followed this blog to change the setting. But did not resolved the issue.
http://hirt.se/blog/?paged=2
please help.
Thanks,
salil

Any leads on this issue?
thanks,
salil

An Error Occurred While Processing Your Request We're sorry. While processing your request, we encountered a system-related error. Your request was not processed. Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23

Every time i log out of my Bank email after getting a copy of transactions, I get the following:
An Error Occurred While Processing Your Request
We're sorry. While processing your request, we encountered a system-related error.
Your request was not processed.
Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23
If the error continues or you need to contact support, please provide them with the Error ID Code above.
That's what I am doing. contacting support.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Bugs in BC CRM web service need to be fix (Server was unable to process request ERROR: A server error has occured)

I'm using the following code to retrieve order list is working fine but it give me an error Server was unable to process request ERROR: A server error has occurred when I trying to retrieve order total paid with same code: and the output when retrieve order total paid is [object Object]
var wsUrl = "https://mysite.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx?WSDL";
                      var RetrieveTotalPaidXML =
                      '<?xml version="1.0" encoding="utf-8"?>\
                      <soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">\
                      <soap12:Body>\
                      <Order_RetrieveTotalPaid xmlns="http://tempuri.org/CatalystDeveloperService/CatalystCRMWebservice">\
                      <username>user</username>\
                      <password>pass</password>\
                      <siteid>111222</siteid>\
                      <orderId>112345</orderId>\
                      </Order_RetrieveTotalPaid>\
                      </soap12:Body>\
                      </soap12:Envelope>';
                       $.ajax({
                        type: "POST",
                        url: wsUrl,
                        Host: "mysite.worldsecuresystems.com",
                        contentType: "application/soap+xml; charset=utf-8",
                        data: RetrieveTotalPaidXML,
                        dataType: "xml",
                        success: processSuccess,
                        error: function(){alert("Error: Something went wrong");}
                       function processSuccess(ResData) {
                       var RetrieveTotalPaidParse = $.parseXML(ResData);
                       var $xmlRetrieveTotalPaidParse = $(RetrieveTotalPaidParse);
                       var $Order_RetrieveTotalPaidResult = $xmlRetrieveTotalPaidParse.find('Order_RetrieveTotalPaidResult');
                               $Order_RetrieveTotalPaidResult = $(this).find('Order_RetrieveTotalPaidResult').text();
                               $('#RetrieveTotalPaidResult').text(Order_RetrieveTotalPaidResult);
I think there a bug in BC CRM Web Service when trying to make a request for Order_RetrieveTotalPaid using soap need to be fix

Perhaps it would be good to update the sample request as shown on the Developer reference page for this method (and, actually ALL of the SOAP samples)
The sample shows siteid (all lower case)

Process Chain Error while activating DSO

Hello.
1st, let me say that I'm pretty new to BI so I apologize for the stupid question :-S
I have a process chain (Warehouse Mangement) that failed this morning at the DSO data activation step. It's simply because some entries have lowercase value in a field that should not. I know how easy this is to fix in the transformation but my problem is more on how to fix the actual fail of the process chain. Can I edit the "non-activated" data in the DSO (only 2-3 records that I need to put in uppercase) and "repair" my process chain or should I proceed another way?
Thanks for your help.

Hi John.
If guess your Process Chain process ended in "Red color". Once you fix the error you can try to make "right-click" on the process with error and select "Repair". If this operation is "supported" by the activation process you won't have error.
But I really believe that you'll have to erase the request and launch the complete process (o set of related processes) once again. It's possible that the data you want its already in the NEW-DATA table of your ODS.
This tables is the following. /BIC/A<your ods tech-name>40
Hope it helps
gdmon.-

While installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Add Network process pattern error

Similar Messages

Maybe you are looking for