ADD NEW CHARACTERISTIC: MAKTX (material text) in Profitability Report_CO-PA

Hello,
I have a CO-PA report (ZINTEGR...), when I run (KE30 tr.), I check the report by the Navigation fields (charact.) Company Code and Product, with drill down of material numbers and text.
This text is the "Product Hierarchy" (MARA-PRDHA), field in the Material Master and also I have the Material number (RMMG1-MATNR), but I need a long text to see all the material details descrip., so I will need the material description (short text-->MAKT-MAKTX) instead of the text that I have in the Product Hierarchy field in the material master data.
It is possible to add, (i suppose like a charact.) in the Z CO-PA report?
I try to edit charact. (KEA5 tr.) and I can´t see the MAKT-MAKTX in the characteristic overview list.
It is possible if I create a new charact. (WW...)?
B.Regards
Francisco

Hi,
If the problem exists only in KE30, please goto KE30 -> execute the report (e.g. drilldown) -> select the column -> goto SETTINGS -> CHARACTERISTICS DISPLAY -> select name + key. Also check the other options available here
regards
Waman

Similar Messages

Is it possible to add new columns with format "Text" once a table is linked to a form

Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.

Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps!

How to add new columns in materialized view

We are using Oracle 10g Release2.
We need to add new columns to a prebuilt fast refresh materialized view. We want to add 4 new columns in this table and make them part of select statement in the materialized view. We can drop the view but we cannot do complete refresh after that because the paymentsInfo table has a creation_timestamp column which is populated by before row insert trigger with systimestamp. If we did the complete refresh, all values in this column shall be changed.
CREATE MATERIALIZED VIEW paymentsInfo
ON PREBUILT TABLE
REFRESH FAST
ON DEMAND
START WITH SYSDATE
NEXT SYSDATE+5/1440
WITH PRIMARY KEY
DISABLE QUERY REWRITE AS
SELECT PAYMENT_ID,BATCH_REFERENCE, TRANSACTION_REFERENCE, NO_OF_TRANSACTIONS, DEBIT_ACC_NUM,... from payment@dblink
I want to know is there any other way to add new columns without losing any changes from the master table.
Thanks.

There is no way to add new Columns to Materialized view. To add new columns, it has to be dropped and re-built again.
Extract from Oracle Documentaion:
Use the ALTER MATERIALIZED VIEW statement to modify an existing materialized view in one or more of the following ways:
To change its storage characteristics
To change its refresh method, mode, or time
To alter its structure so that it is a different type of materialized view
To enable or disable query rewrite
If you have a problem of Complete refresh, then It may be beneficial to get the backup of the MView; Drop and re-create it with modified definition; Restore the backup data leaving the new columns untouched (assuming they are to be kept as fetched from the Master site).

Add new tab of long text to production order

Hi all
i need to add new tab of long text to production order, which will be blocked for changes.
anyone can help with this?
thanks.

Yossi,
The purpose of long text is so that business users can add additional information while processing the order so that everyone can check the text.
Please tell us why do you want to block the production order text? Also why do you need a new tab for long text? and where do you want that information to be stored?
-Swapnil

Is it possible to add new characteristic to CCM catalog SRM_EXTRACTED_CTLG?

Hi Experts,
Any idea if I can transfer new extra data from the SRM product master into CCM? (via program BBP_CCM_TRANSFER_CATALOG)
So I want to add a new characteristic (e.g. ZVALUEPRICE) to the catalog SRM_EXTRACTED_CTLG and fill it with the valuation price.
According to BAdI BBP_CCM_CHAR_MAINT it should be possible:
"When you transfer SRM product data to SAP Catalog Content Management (SAP CCM), this BAdI enables you to also transfer additional item characteristics contained in the product master data in SAP Enterprise Buyer. These characteristics are then available in the SRM product catalog in SAP CCM."
But I'm getting errors like: "Value assigned to ZVALPRICE is not valid-locale NL/ is not possible".
Any idea how I should set this up? Or if I'm doing anything wrong?
I know the valuation price is also filled in /CCM/PRICE, but I want to map the content into a different field. And change the mapping of original created field is not possible.
Thanks in advance.
Kind regards,
Marius Hartman
Edited by: Marius Hartman on Mar 4, 2009 1:39 PM

Hi All,
Turns out that when we don't add a language code to the code, the problem is resolved. So currently I'm able to add the information to a new field in CCM catalog SRM_EXTRACTED_CTLG
Marius Hartman

Add new characteristic in the currency translation method

Hi All,
I would like to know if it's possible to add a characteristic in the currency translation method in order to use it in the exchange rate determination.
Currently the available characteristic are: Country, Segment, Cons. Group, Profit Center, Company, Trading Partner, Investees, Document Type, Posting Level, Translation Indicator and Local Currency.
Thanks in advance.
Best Regards
João Anastácio

One way to accomplish this is to change the method layout to explicitly include the desired characteristic. Another is to make the characteristic in the breakdown category for the items where it is to be included.

How to add new Characteristic in Report painter?

Hi All,
My requirement is Create/Modify a Report in Report Painter/Writer which should generate cost information in Controlling Area Currency for all sites (domestic & international) associated to the Project. Earlier same Report is fecthing Object Currency Values for the given Project.
When i tried to add "Controlling Area currency" in place of "Object Currency" characteristic, then from the available characteristics of the FORM/Report, i am unable to find the "Controlling Area urrency".
Please let me know how to get this "Controlling Area currency" characteristic.
Note: This Report is intially developed in Report painter So no ABAP code is present , So People who knows Report painter/Report Writer concepts with Currency translations can helpme out.
Please do the needful as i am new to Report Painter please Give T-codes and any useful links regarding this Multiple Currency handling /Currency conversion concepts of Report Painter.

I am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT table.
I want to know how this can be achieved in the same report in report painter.
I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
Thanks and let me know if you want to know more on the issue I am facing.

Add New Characteristic to Info Cube

Matez,
 Relating to Standard Info Cube 0PCA_C01 - PCA: Transaction Data
 I added 2 Info Object[0COSTELMNT,0COSTGRP] to this Info Cube
 I modified the Info Source 0EC_PCA_1, to include this 2 Info Object[0COSTELMNT,0COSTGRP].
 However, in my Transfer Rule I get the following error message when I attempted to map these Info Objects in my Transfer Rule

 InfoObject 0COSTELMNT does not exist in the InfoSource 0EC_PCA_1

Hi John,
You get this error because you have no such fields in your data sources. Though, you included them into cube and infosource, you cannot map infoobject with null. You have to enhance your datasource including there these two fields, write user exits to populate them etc.
But, IMHO, the whole idea of bringing into profit center cube such cost parameters as cost element and cost group is very very bad. The principles of splitting costs and profits are very different. Its something like comparing apples and oranges. The link between these two areas is a profit cost centers relationship.
If you want to match your profits and costs Id recommend the following:
1. Use CO-PA.
2. Bring all cost relevant data into cube for costs. To put into profit cube a cost center char (or a profit center char - into costs cube) and build multiprovider on those two cubes.
Best regards,
Eugene

How to add new "text" field in GL item fast entry?

Hi Gurus,
Is that possible to add "text" column or field in GL item fast entry. For example, if i go to Txn F-04, i enter all the details then i go to: "Goto>GL item fast entry (shift+F8). Now you will see layout (GL item fast entry). So back to my question before, is that possible to add new field or column (text field) in this layout? If the answer is Yes, appreciate Gurus help and guide me in configuration, if any.
Thank you
Regards,
Nazrul

Hi Sreehari Annavaram,
Thank you for your kind reply. Based on the answer from the link you have given me (as per below quote), there's no "DEM03" in my selection screen. We only have SAP01, SAP02 and GL001 (customised layout). That's why i had created new customised layout GL002 and try to add the "text" field in layout as per my first question. But system still won't allow it.
*"In F-02 under editing option screen screen templates and line layout variant for document entry will be there in that
GL accounts items for fast entry select DEM03 u will get the text item"*
Appreciate help.
Thank you
Regards,
Nazrul

Drill down reporting - add new field

Hi experts,
                   we have created drill down reporting for vendor line item using FKI4. we need to add new characteristic (new field - assignment column- zuonr) for form and reports.
guide me.
Regards,
Ravi

Hi
For columns select 'key figure with characteristics' . There   give Key figure - balance c/f' and select the characteristic from the   left side list.
Then for rows select ' characteristic'    and   again select from left hand side list.
You define the total where required.   Save this form .
You can also   create report in GRR1 using the form created.
I   am sending   you a document in you contact details.
Thanks
kamala

When I sync my ipod to add new material, sometimes itunes will automatically rearrange the song order of my pre-existing albums by number of plays. Why does it do this? And is there a way to stop it?

When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing material by songs with the greatest number of plays to least (though sometimes it seems to be completely random). When I check itunes on my computer, everything still appears to be in order but the way it appears on the device often is in the previously mentioned disorder. Why does it do this? Is there any setting that I can adjust to make it stop because the only way I've found so far is to delete the rearranged material and re-import the cd and then re-sync. It might sound picky, but I prefer that my music be in order by track number as the artists themselves intended for various reasons the foremost being that I often listen to whole albums from start to finish and this glitch makes such problematic. I have found some settings in preferences that focus on how material is arranged but this seemed to be focused on the actual folders where the music is located on my hard drive and not the way it appears on the ipod. If anyone knows the reason it does this or has suggestions on fixing it, I would be greatly appreciative. Thanks.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

How can i add a new characteristic to Sap standard InfoObject?

Hi Experts,
Please anyone let me know how can I add a new characteristic or a key figure into an SAP standard InfoObject in order to add it to the standard InfoCube? The situation is I would like to add region and business unit to the characteristics of the Industrial Hygiene and Safety. After that, I would like to add them to the InfoCube called Accidents: Person Involved [0EIH_C02] that is located in the MultiProvider called Accidents: Complete View [0EIH_MC01]. Is it feasible to do this way?
I just learned the BW/BI, so please help me with this. I would really appreciate your responses.
Thanks,
-Napadol

Hi Napadol,
To add a attribute in a char:
1) Go to info object/char in change mode and add the additional attribute you want and select navigational attribute in attribute tab if you want. (Create these additional attribute first in info object catalouge)
2) Activate the Object/Char
3) open info cube in change mode and pick the characteristic from left panel to info cube dimension.
4) Activate infocube.
5) Go to multi provider add the char in one of the dimension and do identification for this char and activate.
Regards,
Kams

How to add new text and an empty space before a file name with Automator

I can create a new service to add to multiple files some text before the file name but I need to add even an empty space; e.g. file name original becomes: new text(space)file name original. The aim is to add this text and space to multiple files.
I hope to be understood. Please can somebody help me?
Thanks

This is an old Apple-supplied AppleScript that will do the job.
IMPORTANT: note the conditions of use: it will choose the frontmost Finder window to operate on. Therefore, open the folder you want to change the names of and make it the front finder window BEFORE running the script.
Add to File Names
This script is designed to add a prefix or suffix to files in the front window of the desktop.
If no folder windows are open, the script will affect items on the desktop.
Copyright © 2001–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
--March 2014: Changes by Phil Stokes to make the script work on 10.9
--these changes are simply reversing the order of parameters in the lines that have "copy" in them
-- The following line is disabled due to a Menu Manager bug
--set the source_folder to (choose folder with prompt "Pick the folder containing the files to rename:")
try
          tell application "Finder" to set the source_folder to (folder of the front window) as alias
on error -- no open folder windows
          set the source_folder to path to desktop folder as alias
end try
set the prefix_or_suffix to ""
repeat
          display dialog "Enter the prefix or suffix to use:" default answer the prefix_or_suffix buttons {"Cancel", "Prefix", "Suffix"}
          copy the result as list to {button_pressed, prefix_or_suffix}
          if the prefix_or_suffix is not "" then exit repeat
end repeat
set the item_list to list folder source_folder without invisibles
set source_folder to source_folder as string
repeat with i from 1 to number of items in the item_list
          set this_item to item i of the item_list
          set this_item to (source_folder & this_item) as alias
          set this_info to info for this_item
          set the current_name to the name of this_info
          if folder of this_info is false and ¬
                    alias of this_info is false then
                    if the button_pressed is "Prefix" then
                              set the new_file_name to the (the prefix_or_suffix & the current_name) as string
                    else
                              set the new_file_name to the (the current_name & the prefix_or_suffix) as string
                    end if
                    my set_item_name(this_item, the new_file_name)
          end if
end repeat
beep 2
on set_item_name(this_item, new_item_name)
          tell application "Finder"
--activate
                    set the parent_container_path to (the container of this_item) as text
                    if not (exists item (the parent_container_path & new_item_name)) then
                              try
                                        set the name of this_item to new_item_name
                              on error the error_message number the error_number
                                        if the error_number is -59 then
                                                  set the error_message to "This name contains improper characters, such as a colon (:)."
                                        else --the suggested name is too long
                                                  set the error_message to error_message -- "The name is more than 31 characters long."
                                        end if
--beep
                                        tell me to display dialog the error_message default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                                        copy the result as list to {button_pressed, new_item_name}
                                        if the button_pressed is "Skip" then return 0
                                        my set_item_name(this_item, new_item_name)
                              end try
                    else --the name already exists
--beep
                              tell me to display dialog "This name is already taken, please rename." default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                              copy the result as list to {button_pressed, new_item_name}
                              if the button_pressed is "Skip" then return 0
                              my set_item_name(this_item, new_item_name)
                    end if
          end tell
end set_item_name

MM50 : add new column in the material view

Dear guru.
I need to add a new column of material master in the material view of MM50.
Do you have a solution (exit) in order to solve my problem ?
Thanks.

> I need to add a new field in the MM50 transaction not in MM02.
Der Friend,
Pls be specific about your query. As you know MM50 is for material view extension which is a std SAP trxn to help extend the views set by standard SAP pack and if you are referring new field as a new view then it is not so easily approachable.
Shiva

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

ADD NEW CHARACTERISTIC: MAKTX (material text) in Profitability Report_CO-PA

Similar Messages

Maybe you are looking for