Add new characteristics in the ReleaseStrategies to PO in the PRD system

Dear all ,
We need to create 2 new characteristics and add it to our Release strategies in production systems.
we have more or less 2500 opened POs.
Can I add directly in the Production system ?
Does anyone knows the impacts on the system if we do that directly in the PRD ?
Someone have a list of things to do prior this change and a list to do after this change ?
Impacts ?
best regards,
Ale

Hi,
Try the same in Quality server and check for few POs.
If a new characteristic is added to a CLASS eg. in ur case Pur group is added as a new characteristic to CLASS then Release strategy tab gets triggered only to those POs for which all conditions are met.
In ur case if olds POs purchasing group is different from the one mentioned in the values of Pur Group characteristic then u will not be able to release POs once u go to change mode to old POs since release strategy tab itself disappears.
Hope its clear
Regards,
Uzair

Similar Messages

Cannot add a new characteristics from the system catalog

Hi,
I am trying to pull and add a new characteristics from the existing characteristics catalog. However when i save and activate the new char, the system throwing a yellow warning message as "Field KMKDGR has the same name as field KDGRP". When i proceed to save it since its just a warning message the system says all fields are saved. However when i quit and come to the characteristics list of the op concern, i notice the new characteristic is not added into the list of characteristics. Why is it so?
Is it because of the warning message?

Hi
The warning message can be ignored...
Once you save the char, you need to reactivate your data structure in KEA0... Ideally, when you save and press the back button, system itself gives a pop up message to reactivate the data structure...
1. Push the char from right to left
2. There will be a "match-stick" icon at the top left of the screen.. Click it
3. Then press back button
4. Whether with our without pop up message, activate your data structure in KEA0
Regards
Ajay M

I wnat to add new fieldtext in the alv list output plz tell me

hi,
i whant add new fieldtext in the list output, plz tell me where can i modify it.
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001 L9CK045451 0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
22.04.2004 S6BK024775 730486 PS     Too many selection parameters in
                                     header
19.06.2006 S6BK035494 956731 JF     No sorting by qualification
REPORT RHPK_FIND_PERS_WITH_EXPIRED_QU MESSAGE-ID PQ.
DATA AUFRUF(8).
TABLES : OBJEC, GDSET.
DATA LIST.
DATA MARKFIELD(1) TYPE C.
ALV_POOL
TYPE-POOLS SLIS.
INCLUDES
INCLUDE .
INCLUDE RHPEINI0.
TABLES
DATA: orgeh_BUFFER like hrobject OCCURS 1 WITH HEADER LINE.
DATA: OBJECTS    LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
DATA: h_OBJEC    LIKE objec    OCCURS 0 WITH HEADER LINE.
DATA: pers_objects LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
DATA: QUALI_TAB LIKE QUALI_PROF OCCURS 1 WITH HEADER LINE.
DATA: PERSONS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: H_PERSONS LIKE HRPE_PROFL OCCURS 1 WITH HEADER LINE.
DATA: LIST_OUTPUT LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: BOOK_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: PLAN_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA H_SUITED LIKE DYNP_PCRIT-SUITED.
DATA: O_COLOR LIKE STREEATTR-COLOR.
DATA: O_INTENSIV LIKE STREEATTR-INTENSIV.
DATA SHOW_KEY.
DATA EVENT.
DATA: HTEXT LIKE P1000-STEXT.
DATA: EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: COLLECTED_EVENTS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: SUBTY_TAB LIKE HRPE_OTYPE_SUBTY OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF HIDE_STRU,
        PERSTYPE LIKE HROTYPE-OTYPE,
        PERSOBID LIKE HRSOBID-SOBID,
        PERSTXT LIKE PERSQ_PROF-STEXT,
        SCALE_ID LIKE HRPE_PROFQ-SCALE_ID,
        TRAININGTYPE LIKE HRP1000-OTYPE,
        TRAININGID   LIKE HRP1000-OBJID,
        TRAININGSTXT LIKE HRP1000-STEXT,
        QUALID LIKE QUALI_PROF-QUALID,
        QUALTEXT LIKE QUALI_PROF-QUALSTXT,
      END OF HIDE_STRU.
DATA: BEGIN OF EXTAB OCCURS 10,
         FCODE LIKE RSMPE-FUNC,
      END OF EXTAB.
DATA: CURRENT_QUALID LIKE QUALI_PROF-QUALID.
DATA: CURRENT_TRAININGSID LIKE HRP1000-OBJID.
DATA: CURRENT_TRAININGTYPE LIKE HRP1000-OTYPE.
DATA: SUBRC LIKE SY-SUBRC.
VARIABLES
DATA: OBJID LIKE P1000-OBJID.
DATA: H_LINE_COUNT TYPE I.
DATA: H_TABIX1 LIKE SY-TABIX.
ALV-Variables
DATA: alv_events_line    TYPE slis_alv_event.         "header line
DATA ALV_EVENTS TYPE SLIS_T_EVENT.
DATA GT_ALV_LIST_TOP_OF_LIST TYPE SLIS_T_LISTHEADER.
DATA: gt_events TYPE SLIS_T_EVENT.
DATA G_REPID LIKE SY-REPID.
DATA G_VARIANT LIKE DISVARIANT.
DATA ALV_USERCOMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA G_USERCOMMAND_FOR_RANKINGLIST TYPE SLIS_FORMNAME VALUE
'USER_COMMAND_FOR_RANKINGLIST'.
DATA ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
DATA: Help_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
begin of Dynpro 5020 - POPUP: WEITER
DATA: OK_CODE_5020   LIKE SY-UCOMM.
DATA: NO_ORG.                          "if no org selected
DATA: H_TABIX LIKE SY-TABIX.
begin of Dynpro 20nn - Header
TABLES: DYNP_RHPP.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-005.
PARAMETERS:
   H_EVENTS LIKE DYNP_RHPP-GEN_TRAIN, "with training sugg
   H_QUAL   LIKE DYNP_RHPP-EXPIRED_QUAL. "with Qual
SELECTION-SCREEN END OF BLOCK B3.
INITIALIZATION
INITIALIZATION.
PERFORM READ_T77S0_PARAMETERS_FOR_PE.
get user parameters/Planvariante und Beginndatum setzen:
PCHOTYPE = $ORGEH.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            FILL_IF_INITIAL = 'X'
       IMPORTING
            PLVAR           = PCHPLVAR
            BEGDA           = PCHBEGDA
            endda           = Pchendda    "Correction 0410219
            WITH_KEY        = SHOW_KEY
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            ORG_UNIT        = PCHOBJID-LOW
      EXCEPTIONS
            OTHERS     = 0.
PCHBEGDA = LOW_DATE.   "Correction note: 0410219 / AL0K023393
get menu text for key on/off
PERFORM USER_MENU_TEXT_KEY(SAPLRHP0) USING G_MENU_TEXT_KEY.
start-of-selection
START-OF-SELECTION.
terminate the selection if objid isn't given
READ TABLE PCHOBJID INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0
AND PCHOBJID IS INITIAL.
    PCHOBJID-SIGN   = 'I'.
    PCHOBJID-OPTION = 'EQ'.
    PCHOBJID-LOW    = '00000001'.
    APPEND PCHOBJID.
    NO_ORG = TRUE.
ELSE.
    NO_ORG = FALSE.
ENDIF.
GET OBJEC.
terminate the selection if objid isn't given
IF NO_ORG = TRUE.
    EXIT.
ENDIF.
OBJECTS-PLVAR = PCHPLVAR.
OBJECTS-OTYPE = PCHOTYPE.
OBJECTS-SOBID = OBJEC-REALO.
APPEND OBJECTS.
Für das lesen der Organisationseinheit
h_OBJEC-PLVAR = OBJEC-PLVAR.
h_OBJEC-OTYPE = OBJEC-OTYPE.
h_OBJEC-OBJID = OBJEC-objid.
append h_objec.
Read table h_objec index 1 transporting no fields.
if sy-subrc = 0.
Fill Buffer
    orgeh_BUFFER = h_OBJEC.
    orgeh_BUFFER[] = h_OBJEC[].
    CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
      TABLES
        OBJECTS = orgeh_BUFFER.
    Loop at h_OBJEC.
      H_TABIX = SY-TABIX.
Read text of organisation
      CALL FUNCTION 'RH_READ_OBJECT'
           EXPORTING
                PLVAR     = h_OBJEC-plvar
                OTYPE     = h_OBJEC-otype
                OBJID     = h_OBJEC-OBJID
           IMPORTING
              OBEG      = h_objec-begda
              OEND      = h_objec-endda
               SHORT     = short
                STEXT     = h_OBJEC-stext
          EXCEPTIONS
                NOT_FOUND = 1
                OTHERS    = 2.
      IF SY-SUBRC = 0.
        modify h_OBJEC index H_TABIX.
      ENDIF.
    endloop.
endif.
end-of-selection
END-OF-SELECTION.
read objects of the organizational unit
OBJID = OBJECTS-SOBID.
CALL FUNCTION 'RHPH_PICK_UP_PERSONS'
      EXPORTING
           BEGDA      = PCHBEGDA    "Correction 0410219
           ENDDA      = PCHENDDA    "Correction 0410219
         STATUS     = '1'
           WITH_STEXT = 'X'
       TABLES
            OBJECTS    = OBJECTS
            PERSONS    = H_PERSONS
      EXCEPTIONS
           UNDEFINED = 1
           OTHERS     = 2.
IF SY-SUBRC = 0.
prepare objects !
    objects-otype = h_persons-ttype.
    objects-sobid = h_persons-tobid.
    append objects.
ELSE.
    EXIT.
ENDIF.
CLEAR OBJECTS. REFRESH OBJECTS.
prepare sel_objects !
pers_objects-PLVAR = PCHPLVAR.
LOOP AT H_PERSONS.
    pers_objects-OTYPE = H_PERSONS-TTYPE.
    pers_objects-SOBID = H_PERSONS-TOBID.
    APPEND pers_objects.
ENDLOOP.
sort objects and delete adjacent duplicates
SORT Pers_OBJECTS BY PLVAR OTYPE SOBID.
DELETE ADJACENT DUPLICATES FROM Pers_OBJECTS COMPARING PLVAR OTYPE
SOBID.
CALL FUNCTION 'RHPK_FIND_PERS_WITH_EXPIRED_Q'
       EXPORTING
           PLVAR            = PCHPLVAR
           CHECK_BEGDA      = PCHBEGDA
           CHECK_ENDDA      = PCHENDDA
           SUBTY            = $ownsb                        "'B032'
         only_essential   =
         target_otype     =
         target_ap_iea    =
       TABLES
            IMP_PER_TAB     = pers_objects
            QUALI_TAB       = QUALI_TAB
            PERSONS         = LIST_OUTPUT
        altq_tab          =
      EXCEPTIONS
           NO_QUALIFICATION = 1
           NO_PERSON_FOUND = 2
           OTHERS           = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
100% case
READ TABLE pers_objects INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC = 0.
    sort pers_objects by otype sobid.
check the selected persons: if org.unit was selected !
    Loop at pers_objects.
      H_TABIX = SY-TABIX.
      READ TABLE LIST_OUTPUT WITH KEY OTYPE = pers_objects-OTYPE
                                       SOBID = pers_objects-SOBID
                                       BINARY SEARCH.
      IF SY-SUBRC <> 0.
      person doesn't belong to the selected org.unit
      DELETE LIST_OUTPUT INDEX H_TABIX.
      ENDIF.
    ENDLOOP.
ENDIF.                               "org.unit check needed ?
end-of-selection.
sort h_objec by otype objid.
sort list_output by otype sobid.
sort h_persons by ttype tobid.
ALV-Liste aufbauen
loop at h_objec.
    loop at h_persons where otype = h_objec-otype     "XSC
                      and   sobid = h_objec-objid.    "XSC
      Read table list_output with key
                             otype = h_persons-ttype
                             sobid = h_persons-tobid
                             binary search.
      if sy-subrc = 0.
        h_tabix1 = sy-tabix.
        while sy-subrc = 0.
          clear alv_output.                            "XSC
          ALV_OUTPUT-otype    = h_objec-otype.
          ALV_OUTPUT-sobid    = h_objec-objid.
          ALV_OUTPUT-stext    = h_objec-stext.
          ALV_OUTPUT-Ptype    = LIST_OUTPUT-otype.
          ALV_OUTPUT-pobid    = LIST_OUTPUT-sobid.
          ALV_OUTPUT-pshort   = LIST_OUTPUT-short.
          ALV_OUTPUT-ptext    = LIST_OUTPUT-stext.
          ALV_OUTPUT-qualid   = LIST_OUTPUT-qualid.
          ALV_OUTPUT-qualstxt = LIST_OUTPUT-qualstxt.
          ALV_OUTPUT-expbegda = LIST_OUTPUT-vbegda.
          ALV_OUTPUT-expendda = LIST_OUTPUT-vendda.
      PERFORM FIND_TRAINING TABLES QUALI_TAB EVENT_TAB COLLECTED_EVENTS
                USING $PLVAR $GDATE H_EVENTS H_QUAL.
          IF NOT EVENT_TAB[] IS INITIAL.
            READ TABLE COLLECTED_EVENTS WITH KEY
                                 QUALID = LIST_OUTPUT-QUALID.
            IF SY-SUBRC = 0.
              ALV_OUTPUT-ICON_S_EVENTS = ICON_BOOKEVENT.
            endif.
          ENDIF.
          Append ALV_OUTPUT.
          h_tabix1 = h_tabix1 + 1.
          READ TABLE list_output INDEX h_tabix1
                     COMPARING otype sobid.
        endwhile.
      endif.
    endloop.
endloop.
check if indicator for qualification view is set
IF h_qual = 'X'.                                          "note 956731
    SORT alv_output by qualid OTYPE SOBID ptype pobid       "note 956731
    expbegda expendda.                                      "note 956731
ELSE.                                                     "note 956731
    SORT alv_output by OTYPE SOBID ptype pobid qualid expbegda expendda.
ENDIF.                                                    "note 956731
DELETE ADJACENT DUPLICATES FROM ALV_OUTPUT COMPARING OTYPE SOBID ptype
    pobid qualid expbegda expendda.
stext_AQ und icon-Feld noch nicht gefüllt
    perform PREPARE_TOP_OF_LIST.
    perform Build_FIELDCAT using GT_FIELDCAT[] H_EVENTS.
    perform ALV_LAYOUT USING alv_layout.
    G_REPID          = SY-REPID.
    G_VARIANT-REPORT = G_REPID.
    PERFORM EVENTTAB_BUILD USING GT_EVENTS.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
    I_INTERFACE_CHECK        = 'X'
        I_CALLBACK_PROGRAM       = G_REPID
    I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
        I_CALLBACK_USER_COMMAND = ALV_USERCOMMAND
        I_STRUCTURE_NAME         = 'HRPDV_EXPIRED_Q'
        IS_LAYOUT                = ALV_LAYOUT
        IT_FIELDCAT              = GT_FIELDCAT[]
    IT_EXCLUDING             =
    IT_SPECIAL_GROUPS        =
    IT_SORT                  =
    IT_FILTER                =
    IS_SEL_HIDE              =
        I_DEFAULT                = 'X'
        I_SAVE                   = 'A'
        IS_VARIANT               = G_VARIANT
        IT_EVENTS                = GT_EVENTS
    IT_EVENT_EXIT            =
    IS_PRINT                 =
    IS_REPREP_ID             =
    I_SCREEN_START_COLUMN    = 0
    I_SCREEN_START_LINE      = 0
    I_SCREEN_END_COLUMN      = 0
    I_SCREEN_END_LINE        = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER =
      ES_EXIT_CAUSED_BY_USER   =
      TABLES
        T_OUTTAB                 = ALV_OUTPUT
      EXCEPTIONS
          PROGRAM_ERROR            = 1
          OTHERS                   = 2 .
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
*&      Form FIND_TRAINING
      text
     -->P_QUALI_TAB text
     -->P_EVENT_TAB text
     -->P_$PLVAR text
     -->P_GDATE text
     -->P_H_EVENT text
     -->P_H_QUAL text
FORM FIND_TRAINING TABLES P_QUALI_TAB STRUCTURE QUALI_TAB
                           P_EVENT_TAB STRUCTURE EVENT_TAB
                           P_COLLECTED_EVENTS STRUCTURE COLLECTED_EVENTS
                   USING   VALUE(P_$PLVAR) LIKE P1000-PLVAR
                           VALUE(P_GDATE) LIKE P1000-GDATE
                           VALUE(P_H_EVENT) TYPE ANY
                           VALUE(P_H_QUAL) TYPE ANY.
IF NOT P_H_EVENT IS INITIAL.
    READ TABLE EVENT_TAB INDEX 1 TRANSPORTING NO FIELDS.
    IF SY-SUBRC <> 0.
      CLEAR P_EVENT_TAB. REFRESH EVENT_TAB.
      CLEAR P_COLLECTED_EVENTS. REFRESH P_COLLECTED_EVENTS.
      IF EVENT = FALSE.
        EVENT = TRUE.
      ELSE.
        EVENT = FALSE.
      ENDIF.
      CALL FUNCTION 'RHPH_FIND_TRAINING_FOR_QUAL'
           EXPORTING
                PLVAR            = PCHPLVAR
                GDATE            = SY-DATUM
              GET_NAME         = 'X'
           TABLES
                QUALI_TAB        = QUALI_TAB
                TO_Q_TAB         = EVENT_TAB
          EXCEPTIONS
               NO_QUALIFICATION = 1
               NO_OBJECT_FOUND = 2
               TECHNICAL_ERROR = 3
               OTHERS           = 4.
      IF SY-SUBRC = 0.
the found qualifications are picked up into table event_tab
      ENDIF.
      IF SY-SUBRC = 1.
        MESSAGE S015.   "Zu den Eingaben wurden keine Daten gefunden
      ENDIF.
      IF SY-SUBRC > 2.
        EXIT.
      ENDIF.
collect events when there are double.
Veranstaltungen kollektieren, Können mehrfach auftauchen, da
verschiedenen Qualifikationen von gleichen Veranstaltungen vermittelt
      LOOP AT P_EVENT_TAB INTO P_COLLECTED_EVENTS.
        APPEND P_COLLECTED_EVENTS.
      ENDLOOP.
      SORT P_COLLECTED_EVENTS BY QUALID STEXT.
    ENDIF.
ENDIF.
ENDFORM.                               " FIND_TRAINING
*&      Form PREPARE_TOP_OF_LIST
      text
--> p1        text
<-- p2        text
FORM PREPARE_TOP_OF_LIST.
DATA ALV_TOP_OF_LIST TYPE SLIS_LISTHEADER. "typ, key, info
DATA STEXT LIKE HRPDV_SUCCESSOR_VIEW-TTEXT.
DATA P_SUBRC LIKE SY-SUBRC.
DATA P_STEXT LIKE T777O-OTEXT.
DATA l_tabix like sy-tabix value 0.
DATA: h_counter TYPE i.                             "note 730486
ALV_TOP_OF_LIST-TYP = 'H'.
ALV_TOP_OF_LIST-INFO = TEXT-REQ.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
Organisationseinheit
ALV_TOP_OF_LIST-typ = 'S'.
Read text for organisationunit
PERFORM READ_TEXT_OTYPE_T777O(SAPLRHP0) USING SY-LANGU $ORGEH
                                                P_STEXT P_SUBRC.
ALV_TOP_OF_LIST-key = P_STEXT.
fill buffer for read organisation-text
CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
     EXPORTING
          CHECK_STRU_AUTH = 'X'
          WITH_EXTINT     = ' '
       TABLES
            OBJECTS         = OBJECTS.
loop at objects for multipleselection
clear h_counter.                          "note 730486
LOOP AT OBJECTS.
    $OBJID = OBJECTS-SOBID.
    CALL FUNCTION 'RH_READ_OBJECT'
         EXPORTING
            PLVAR           = OBJECTS-PLVAR
            OTYPE           = OBJECTS-OTYPE
            OBJID           = $OBJID
         IMPORTING
          SHORT           = short
            STEXT           = STEXT
         EXCEPTIONS
            NOT_FOUND       = 1
            OTHERS          = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF h_counter >= 15.                               "note 730486
      MOVE '( ... )' TO ALV_TOP_OF_LIST-INFO.         "note 730486
      APPEND ALV_TOP_OF_LIST TO gt_alv_list_top_of_list.
      "note 730486
      EXIT.                                           "note 730486
    ENDIF.                                            "note 730486
    CONCATENATE $ORGEH OBJECTS-SOBID STEXT INTO
    ALV_TOP_OF_LIST-INFO SEPARATED BY SPACE.
    APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
    CLEAR ALV_TOP_OF_LIST.
    ALV_TOP_OF_LIST-typ = 'S'.
    l_tabix = l_tabix + 1.
    ADD 1 TO h_counter.                         "note 730486
ENDLOOP.
CLEAR ALV_TOP_OF_LIST.
ALV_TOP_OF_LIST-TYP = 'S'.
ALV_TOP_OF_LIST-key = TEXT-003.
WRITE PCHBEGDA TO ALV_TOP_OF_LIST-INFO.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
clear ALV_TOP_OF_LIST-INFO.
ALV_TOP_OF_LIST-key = TEXT-004.
WRITE PCHENDDA TO ALV_TOP_OF_LIST-INFO.
Append ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
ENDFORM.                               " PREPARE_TOP_OF_LIST
*&      Form BUILD_FIELDCAT
      text
     -->P_GT_FIELDCAT[] text
FORM BUILD_FIELDCAT USING P_GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
                           P_H_EVENTS.
DATA: WA_FIELDCAT LIKE LINE OF P_GT_FIELDCAT.
DATA: P_REPNAME LIKE SY-REPID,
        L_TABIX LIKE SY-TABIX.         "local variable for sy-tabix.
P_REPNAME = SY-REPID.
Erstellen des Feldkataloges
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
     EXPORTING
           I_PROGRAM_NAME         = P_REPNAME
           I_INTERNAL_TABNAME     =
           I_STRUCTURE_NAME       = 'HRPDV_EXPIRED_Q'
           I_CLIENT_NEVER_DISPLAY = 'X'
           I_INCLNAME             = PRONAME
     CHANGING
           CT_FIELDCAT            = P_GT_FIELDCAT
     EXCEPTIONS
           INCONSISTENT_INTERFACE = 0
           PROGRAM_ERROR          = 0
           OTHERS                 = 0.
LOOP AT P_GT_FIELDCAT INTO WA_FIELDCAT.
    l_tabix = sy-tabix.
    CASE WA_FIELDCAT-FIELDNAME.
      when 'OTYPE'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'SOBID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'STEXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'PTYPE'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'POBID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'PSHORT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'PTEXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'QUALID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'QUALSTXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'EXPBEGDA'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'EXPENDDA'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'ICON_S_EVENTS'.
        IF P_H_EVENTS IS INITIAL.
          WA_FIELDCAT-NO_OUT = 'X'.
        else.
          WA_FIELDCAT-DDICTXT = 'X'.
        endif.
    ENDCASE.
    MODIFY P_GT_FIELDCAT FROM WA_FIELDCAT INDEX l_tabix.
ENDLOOP.
ENDFORM.                               " BUILD_FIELDCAT
*&      Form ALV_LAYOUT
      text
     -->P_L_ALV_LAYOUT text
FORM ALV_LAYOUT USING    P_ALV_LAYOUT TYPE slis_layout_alv.
build layout
P_LAYOUT-BOX_FIELDNAME = 'MARK_X'.   "fieldname for checkbox
P_ALV_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
P_ALV_LAYOUT-BOX_TABNAME   = ALV_OUTPUT.   "tabname for checkbox
p_ALV_layout-info_fieldname = 'ALV_COLOR'.
ENDFORM.                               " ALV_LAYOUT
FORM eventtab_build USING
FORM EVENTTAB_BUILD USING RT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
APPEND LS_EVENT TO RT_EVENTS.
ENDFORM.                    "EVENTTAB_BUILD
*FORM TOP_OF_PAGE
FORM TOP_OF_PAGE.                                           "#EC CALLED
NEW-PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = GT_ALV_LIST_TOP_OF_LIST[].
ENDFORM.                    "TOP_OF_PAGE
      FORM USER_COMMAND                                             *
USER_COMMAND for the list of successor view                         *
--> r_ucomm                                                       *
--> rs_selfield                                                   *
FORM USER_COMMAND USING ALV_UCOMM LIKE SY-UCOMM
      RS_SELFIELD TYPE SLIS_SELFIELD.                       "#EC CALLED
DATA: SELECTED_LINE LIKE HRPDV_expired_q.
DATA: SOBID_QUA LIKE P1000-OBJID.
DATA: LT_PERS_TAB LIKE HRSOBID OCCURS 0 WITH HEADER LINE.
CASE ALV_UCOMM.
    WHEN '&IC1'.                       "per Doppelklick auswählen
      READ TABLE ALV_OUTPUT INDEX
      RS_SELFIELD-TABINDEX INTO SELECTED_LINE.
      CASE RS_SELFIELD-FIELDNAME.
        WHEN 'POTYPE' or 'POBID' or 'PTEXT' or 'OTYPE' or 'SOBID' or
'STEXT' or 'QUALID' or 'QUALSTXT' or 'EXPBEGDA' or 'EXPENDDA'.
          READ TABLE ALV_OUTPUT INDEX RS_SELFIELD-TABINDEX INTO
                Help_output.
          IF SY-SUBRC <> 0.
            MESSAGE S027.               "Bitte gültige Zeile auswählen
            EXIT.
          Endif.
     IF ALV_OUTPUT-SOBID IS INITIAL.
       MESSAGE S015. "Zu den Eingaben wurden keine Daten gefunden
     ELSE.
     converte the variable because of the different types
     SOBID_QUA = SELECTED_LINE-SOBID_QUA.
          CALL FUNCTION 'RHPP_SHOW_PROFILE'
            EXPORTING
              PLVAR        = pchplvar
              OTYPE        = SELECTED_LINE-PTYPE       "XSC
              OBJID        = SELECTED_LINE-POBID       "XSC
              BEGDA        = PCHBEGDA
              ENDDA        = PCHENDDA
              MAINTAIN     = ' '
            EXCEPTIONS
              NO_AUTHORITY = 1
              NOT_FOUND    = 2
              OTHERS       = 3.
          CASE SY-SUBRC.
            WHEN 0.
            All right.
            WHEN 1.
              MESSAGE S015.
            Zu Ihren Eingaben konnten keine Daten gefunden werden!
            WHEN 2.
              MESSAGE E000.
            Dazu haben sie keine berechtigung!
            WHEN OTHERS.
              MESSAGE E008.
            Es ist ein unvorhergesehener Fehler aufgetreten.
          ENDCASE.                     "sy-subrc.
          CLEAR ALV_OUTPUT.
   ENDIF.    "IF ALV_OUTPUT-SOBID IS INITIAL.
   CLEAR ALV_OUTPUT-SOBID.
        when 'ICON_S_EVENTS'.
          IF SELECTED_LINE-ICON_S_EVENTS IS INITIAL.
            MESSAGE S027.              "Bitte gültige Zeile auswählen
            EXIT.
          ENDIF.
          CLEAR LT_PERS_TAB.
          REFRESH LT_PERS_TAB.
          LT_PERS_TAB-PLVAR = pchPLVAR.
          LT_PERS_TAB-OTYPE = SELECTED_LINE-PTYPE.          "XSC
          LT_PERS_TAB-SOBID = SELECTED_LINE-POBID.          "XSC
          APPEND LT_PERS_TAB.
          SOBID_QUA = SELECTED_LINE-QUALID.
          CALL FUNCTION 'RHPP_SHOW_SUGGEST_EVENTS'
          EXPORTING
            P_PLVAR      = pchPLVAR
            P_SOBID_QUA = SOBID_QUA
          P_PROFCY_REQ = SELECTED_LINE-RATING_REQ
            P_GDATE      = sy-datum
          TABLES
          EVENT_TAB    =
            PERS_TAB     = LT_PERS_TAB.
      endcase.
      CLEAR SELECTED_LINE.
ENDCASE.                             "case sy-ucomm
CLEAR SY-UCOMM.
ENDFORM.                    "USER_COMMAND

Pls be more specific in your question. If you want to include an extra field in your alv output, then read the field catalog table you created through "Reuse_alv_fieldcatalog_merge" and then add an extra entry in it giving the details of the field you want to add.. and then call the "resuse_alv_grid_display",
Hope this helps. To be able to help you in a better way, kindly revert with any specific issue.
Reward if helpful,
Karan

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new fields to the DME file in F110

Hi,
We have a requirement add new fields to the file that is used in F110.
.I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
Can anybody please help me in resolving the issue.
Thanks
Venkat
Edited by: Venkat R on Jun 8, 2009 8:45 AM

Hi,
There is no function module for that, We have created our own function module and attached to that field.
Refer the below code. This will fetch the document number.
DATA: lwa_item   TYPE dmee_paym_if_type,
        l_fpayp   TYPE fpayp,
        l_fpayhx TYPE fpayhx,
        first_flag TYPE c,
        lv_lifnr   TYPE lifnr,
        voucher_id TYPE string,
        voucher TYPE string,
        invoice_id TYPE belnr_d,
        voucher_len1 TYPE i,
        voucher_len TYPE i.
TYPES:
BEGIN OF lt_regup,
        xblnr TYPE xblnr1,
        belnr TYPE belnr_d,
END OF lt_regup.
DATA: lt_regup TYPE STANDARD TABLE OF regup,
        lv_regup TYPE regup.
Hope this helps.
Raja.A
Edited by: Raja.A on Feb 16, 2011 7:17 PM

How to add new fields in the EBP front end..

Hi All,
Can any one let me know the process of how to add new fileds in the shopping cart creation screens by using the "Tag Browser" option in the Object navigator.
Best Regards,
Mahesh. J

Hi
<b>Please go through the following links for more details and examples -></b>
http://help.sap.com/saphelp_47x200/helpdata/en/a2/8c6eeb2d8911d596a000a0c94260a5/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d3/5ecbe22a8a11d5991f00508b6b8b11/frameset.htm
This will definitely help.
<u>For adding customer fields to the Shopping cart, you need to refer SAP OSS Bote 672960 and 485891.</u>
Do let me know, incase you need any other details.
Regards
- Atul

To add new record into the table Data Service client

When I am trying to add new record into the table Employeedetails using Data Service client it is giving a sql exception: "java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1."
Code:
DataService ds=DataServiceFactory.newDataService(getInitialContext(),"EmplDetApp","ld:EmplDetAppDataServices/EmployeeDetails");
EmployeeDetailsDocument edoc=EmployeeDetailsDocument.Factory.newInstance();
edoc.addNewEmployeeDetails();
//here I set the primary key value empid
edet.setEmpid("1212");
edet.setEmpname("manu");
ds.submit(edoc);
Error
EmpName 5 java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
com.bea.ld.dsmediator.DataServiceException: java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
     at com.bea.ld.dsmediator.update.JDBCAdaptor.save(JDBCAdaptor.java:247)
     at com.bea.ld.dsmediator.update.DataServiceMediator.submit(DataServiceMediator.java:528)
     at com.bea.ld.dsmediator.update.DataServiceMediator.submit(DataServiceMediator.java:245)
     at com.bea.ld.ServerBean.submit(ServerBean.java:529)
     at com.bea.ld.Server_ydm4ie_EOImpl.submit(Server_ydm4ie_EOImpl.java:910)
     at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
     at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:108)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
     at java.lang.Thread.startThreadFromVM(Unknown Source)
Caused by: java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
     at weblogic.jdbc.mssqlserver4.TdsStatement.processWarning(TdsStatement.java:1178)
     at weblogic.jdbc.mssqlserver4.TdsStatement.parseMsWarning(TdsStatement.java:1089)
     at weblogic.jdbc.mssqlserver4.TdsStatement.getMoreResults(TdsStatement.java:756)
     at weblogic.jdbc.mssqlserver4.TdsStatement.execute(TdsStatement.java:210)
     at weblogic.jdbc.mssqlserver4.TdsStatement.executeUpdate(TdsStatement.java:97)
     at weblogic.jdbc.mssqlserver4.TdsStatement.executeUpdate(TdsStatement.java:1455)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:147)
     at com.bea.ld.dsmediator.update.JDBCAdaptor.save(JDBCAdaptor.java:151)
     ... 15 more
But I am not sure why it is giving an exception as Violation of PRIMARY KEY.
The update method works fine for the same client.
The exception only happens when I am trying to insert a new record.
Please help me to figure out this problem.

If you are absolutely sure that you do not have such a row already in your table, open a case with customer support and reference CR321312. I believe the work-around is to put ld-server-core.jar in your client classpath.
Correction: put ld-server-app.jar in the client classpath
Edited by mreiche at 09/17/2007 3:28 PM

Add new line in the Flat file based on the field value

Hi,
Following is my Flat File -
Customer X Y
1001 1 2
1002 0 1
Based on the X and Y value I need to add new lines in the Flat file. If X>0 then add a new line with repeating row and Y>0 add again a new line with repeating row. If X or Y=0 then no need to add any repeating new line.
So, here for the above example I need output as-
Customer X Y
1001 1 2
1001 1 2
1001 1 2
1002 0 1
1002 0 1
Suggest how we can achieve this?
Regards,
Tridib Konwar

Hi Tridib,
I tried your scenario and You will have to use the custom xslt to get the expected result.
Please find bellow the xslt code which you can use in your map.
<?xml version="1.0" encoding="utf-16" ?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:var="http://schemas.microsoft.com/BizTalk/2003/var" exclude-result-prefixes="msxsl var" version="1.0" xmlns:ns0="http://PracticeAtul.XYFlatFileSchema">
<xsl:output omit-xml-declaration="yes" method="xml" version="1.0" />
<xsl:template match="/">
<xsl:apply-templates select="/ns0:XYComp" />
</xsl:template>
<xsl:template match="/ns0:XYComp">
<ns0:XYComp>
<XYComp_Child1>
<XYComp_Child1_Child1>
<xsl:value-of select="XYComp_Child1/XYComp_Child1_Child1/text()" />
</XYComp_Child1_Child1>
<XYComp_Child1_Child2>
<xsl:value-of select="XYComp_Child1/XYComp_Child1_Child2/text()" />
</XYComp_Child1_Child2>
<XYComp_Child1_Child3>
<xsl:value-of select="XYComp_Child1/XYComp_Child1_Child3/text()" />
</XYComp_Child1_Child3>
<xsl:value-of select="XYComp_Child1/text()" />
</XYComp_Child1>
<xsl:for-each select="XYComp_Child2">
<XYComp_Child2>
<XYComp_Child2_Child1>
<xsl:value-of select="XYComp_Child2_Child1/text()" />
</XYComp_Child2_Child1>
<XYComp_Child2_Child2>
<xsl:value-of select="XYComp_Child2_Child2/text()" />
</XYComp_Child2_Child2>
<XYComp_Child2_Child3>
<xsl:value-of select="XYComp_Child2_Child3/text()" />
</XYComp_Child2_Child3>
</XYComp_Child2>
<xsl:if test="XYComp_Child2_Child2/text()!=0">
<XYComp_Child2>
<XYComp_Child2_Child1>
<xsl:value-of select="XYComp_Child2_Child1/text()" />
</XYComp_Child2_Child1>
<XYComp_Child2_Child2>
<xsl:value-of select="XYComp_Child2_Child2/text()" />
</XYComp_Child2_Child2>
<XYComp_Child2_Child3>
<xsl:value-of select="XYComp_Child2_Child3/text()" />
</XYComp_Child2_Child3>
</XYComp_Child2>
</xsl:if>
<xsl:if test="XYComp_Child2_Child3/text()!=0">
<XYComp_Child2>
<XYComp_Child2_Child1>
<xsl:value-of select="XYComp_Child2_Child1/text()" />
</XYComp_Child2_Child1>
<XYComp_Child2_Child2>
<xsl:value-of select="XYComp_Child2_Child2/text()" />
</XYComp_Child2_Child2>
<XYComp_Child2_Child3>
<xsl:value-of select="XYComp_Child2_Child3/text()" />
</XYComp_Child2_Child3>
</XYComp_Child2>
</xsl:if>
</xsl:for-each>
</ns0:XYComp>
</xsl:template>
</xsl:stylesheet>
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.
Atul Toke

How can I add new songs to the top (not the bottom) of my playlist in iTunes?

How can I add new songs to the top of my playlist in iTunes?
I thought thats what it did before but now it automatically adds new songs to the bottom of the list.
Not a huge issue but an annoyance.

Go to your Music library
Then, Click Playlist
Then, Click the sort arrow until it points down.

MM-SUS:You can add new fields in the BSP?

Hi Gurus,
I wonder if you can add new fields in the BSP of invoice in SUS.
I need to enter new fields and then to perform validations using these new fields.
know how to work toward a solution?
Cristian

Hi Cristian,
As Akash has mentioned go to BSP application SRMSUS in SE80. Here you can copy standard invoice views and controler to z and then change them.
You can then create Z tables to store all values entered in this screen. You can ask your programmer to put validity checks accordingly.
Regards,
Nikhil

Can I add new job in the existing Job

Hi Gurus,
There is a job which loads data from 4 ODS to respective Infocubes. Now we are adding new infocube and new ODS to the existing layout so can we add 1 more job which loads data from that ODS to corresponding Infocube. If so how??? Can u give me detailed steps to add new job in the existing job...
Thanks in advance

is the previous loads done through a job or a process chains???
Go to RSPC > check what process chains are there and in case if you find one > log you will see when it was last run and stuff.
But if it is a job in SM37, it is a different story, u might have to create a variant of that job and create events to trigger the job in sequence depending on ur scenario..
give more details. like when is that job triggered, if any events used.

Add new fields in the header of RFITEMAR

hi,
i want to add new fields in the header of RFITEMAR report ,so first i copy i to zRFITEMAR ,then i want to add
" Total Quantity " in the header after City field .
can any one help me????????
please ,, i waiting your answers..
thank you......

hi ,
thanks for your response , but first i try to copy the function then it give an error as it is reserved for sap , so i change it's name and copy it and change function group to z also then it relese an error for function pool , any way.
where can i make change in that function .
and how can i copy it . please tell me every think in more detials.
waiting
thanks.

ADD new Column in the form

Is it possible to ADD new Column in the form like Sale Quotation, Sales Order and ...

It is possible.
go to tools >UDF > Manage UDF >choose marketing documents rows.
select the row and say add to add a new column in the documents.
Note: this will be applied to all documents \
ie.quotation,order ,invoice, PO ,GRPO etc.
U can hide these columns in form settings.
This will help u
Give points if helpful
Regards
Suresh Kannan

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

Add new characteristics in the ReleaseStrategies to PO in the PRD system

Similar Messages

Maybe you are looking for