Add new customer  fields on Basic Data Header of Bid Invitations

Add new fields on Basic Data of Header  of BID INVITATIONS  and other screens. I found many notices sap that it indicates that I can use badi BBP_CUF_BADI_2, both how does it?
I understand that method  MODIFY_MODE_QUOT is due to implement because he is the one that  allows to use in way edition the screen. In this method only   CV_MODE  ='E'.
In which method  I assign the structure with the new fields or customer fields?
In where I indicate to him in that screen must add the new fields or customer fields?
I need to implement more methods to add the new fields the headed one of  basic data of BID INVITATIONS.
Thank you.

Perhaps some answer for you can be found here:
in this forum thread: Bidding Engine general questions :-(
I have moved your thread from the general Business Process Expert forum to here as I think it has a better chance of being answered.
cheers,
Marilyn

Similar Messages

  • Custom field in Basic data screen of invoice entry screen

    hello,
    I want to add custom fields in basic data screen of Invoice entry in SRM 5.0.
    As invoice Entry screen is divided into three parts:
    1. Basic data Screen
    2. Header data screen
    3. Item data screen
    Now according to OSS Note number 672960 we are able to add Custom fields in the header as well as item data screen of invoice entry without any difficulty.
    but our requirement is to add custom fields in the basic data screen.
    Is there way available to add custom fields in the basic data screen.
    Thanks
    Sarabjeet

    hi
    check this spro path
    Financial Accounting (New) --> Travel Management --> Business Add-Ins and User Exits in Travel Management --> Entry --> Screen Modifications: Adjustment of "User Data" Screen

  • Add new custom fields in tcode VA05

    In order to add new custom fields in tcode VA05, i need to change V05TZZMO which is a exit to populate the new fields.
    But how can I edit V05TZZMO ? I must have development key to change that ?

    Hi,
    As u have to modify the standard program directly not any customer exit or badi , for sales order transactions like va01 va02 , va03 , va51 etc..., so u need a developer key as a developer that is common for any program u write for the first time witha new userid + u need a standard sap access key also .
    Regards

  • Add new custom field in FITV_POWL_TRIPS

    Dear All,
    I would like to add my custom field in FITV_POWL_TRIPS Application. The program basically having 5 tabs in output. i have added my custom field in PTRM_POWL_WEB_TRIPS_EXT_T Structure. Now i wanted that field to be displayed in the tab of All My Travel Plans Tab ,  Can any one suggest me how to make display of that field.
    i have seen the Application.configuration FITV_POWL_TRIPS . But i could not able to see the field names list anywhere.
    Please put on some light.

    In Webdynpro Component,  FITV_POWL_TRIPS ......i would like to add one more field in the output of this application under "All My Travel Requests" tabstrip .
    Access path for this application.
    Go to SE80 -> Webdynpro Component -> FITV_POWL_TRIPS ->  Test...
    Under the All My Travel Requests Tabstrip i want to add one more field in the below table control. Right this tab control is displaying 8 Columns.
    My Findings:
    1. The above fields are retrieved from PTRM_POWL_WEB_TRIPS_EXT_T structure. So i have added a Append field in the structure.
    2. In debugging i am able to see my field in the above mentioned structure.
    3. The Tab Strib is calling from POWL_UI_COMP application.
    4. The Table Control is from SALV_WD_TABLE
    Need:
    1.Where is the 8 fields layout are creating by the sytem
    2.How can i add one more field ?
    3.Where to add and how ??
    Please help me...
    Regards,
    Prakash.N
    +91 9980742974

  • ADD New Customized Field to Tcode F-43

    Hi All,
    I want to add a new selection field to the Transaction F-43 .
    Please suggest me the Field Exits/User Exits/BADI for doing the same along with the steps involved.
    Thanks in Advance.
    Regards,
    Bhavika

    Hi,
    Indeed you might be need to use the standard user-exits available in program SAPMV45A. here they would have specifed various userexits comprising with screen and function exits namely:
           U S E R - E X I T S
           U S E R - E X I T S
           U S E R - E X I T S
           INCLUDE MV45ATZZ.            " Data definitions in MV45ATOP
             INCLUDE MV45AOZZ.             " User-modules PBO
             INCLUDE MV45AIZZ.             " User-modules PAI
             INCLUDE MV45AFZA.             " User-forms < 3.0
             INCLUDE MV45AFZB.             " User-forms
             INCLUDE MV45AFZC.             " User-forms < 3.0D
             INCLUDE MV45AFZD.             " User-forms   3.0E
             INCLUDE MV45AFZF.             " User-forms   3.0F
           include mv45afzg.             " User-forms   3.1G
             include mv45afzh.             " User-forms   4.6B
             INCLUDE MV45AFZZ.             " User-forms
             INCLUDE MV45AFZ4.             " User-forms   4.0
    Indeed for header you might be requied to use screen 8309 and the following screen exit MV45AFZZ along with the PBO and PAI screen include MV45AOZZ and MV45AIZZ.
    Regards,
    Jagath

  • Where can I find info on how to add CRM custom fields and import data to them?

    Hi all,
    I am looking at the Extend CRM option in the V3 view.
    Is this new? Or have I just never noticed it before!
    Also is there a tutorial on it and info on how to import Customer data into these extra data fields?
    Thanks,
    Mary

    I'm just getting a good reply from online chat about this.
    Parikshit: First, go to customers -> Import Contacts (Advanced).
    Parikshit: http://rickynath.tk/jing/2012-06-07_0744.png
    Parikshit: Next, Scroll down and choose this option: http://rickynath.tk/jing/2012-06-07_0745.png

  • Adding new custom fields in t code - MIR7

    Dear Experts ,
    I have the following requirement .
    In MIR7 t code under the tab - basic data - i have to add new custom fields like
    Billing document no and billing doc item along with multiple selection option .
    i have found the  BADI - BADI_FDCB_SUBBAS04  . i dont know how to get the custom fields in that .
    Regards
    Prabhu

    I have designed a MODAL SCREEN which contains a table control for multiple entries for  Billing document nos .
    I want to design a PUSHBUTTON on the MIR7 screen and then once i will press the pushbutton the MODAL screen should get called from that .
    When the MODAL screen will be called in the back end the MIR7 screen should also be present in the
    back end .
    If any queries on understanding the requirement then please revert .
    If any body has any idea on this then please suggest .
    Regards
    Prabhu

  • New Customer Field in Shopping Cart (SRM) with default value

    We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
    We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
    /people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
    KR Jaideep,

    Dear Poster
    Your thread has had no response since it's creation over
    2 weeks ago, therefore, I recommend that you either:
    - Rephrase the question.
    - Provide additional Information to prompt a response.
    - Close the thread if the answer is already known.
    Thank you for your compliance in this regard.
    Jason Boggans
    SAP SRM SDN Moderator

  • Addign new customer field in Shopping cart SRM with default value

    We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
    We have added the custom field and also assigned default value  'X' to it using BADI  BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
    [/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm|/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm]
    KR Jaideep,

    Hi,
    In badi BBP_CUF_BADI_2, method MODIFY_OUTPUT,
    are you doing something like this?
    CASE IV_FIELDNAME.
      WHEN 'YOUR_CUSTOM_FIELD'.
        IF IV_VALUE IS INITIAL.
          MOVE 'YOUR_DEFAULT_VALUE' TO EV_VALUE.
        ENDIF.
    ENDCASE.
    Best regards.
    Edited by: Pablo Casamayor on Jul 23, 2009 12:32 PM

  • Add a new field in basic data tab in PPOME for a position

    Hello Evryone,
    I want to display a Job ID field in Basic Data tab when displaying a position. Is this something to do in config? If yes, could anyone please guide me how to do it? Right now I can see only the Job description, but no ID.
    Thank you,
    Rush

    Hi
    Job ID field will not be displayed in Basic Data Tab.  That you can see in the top hald of the portion under <-- Mark.
    The details you can see are
    Task Assignment - Executive
    Code-Exe
    ID C 50000084
    Valid from 30.03.2007
    Valid to Unlimited
    First select the Job "Executive" and press enter, then you can find the details in the first half of the screen.
    Please reward the points without fail.
    Regards
    Venu

  • Add a custom field to Business Partner(master data screen)

    Hi MM experts,
    My requirement: Basically have to pass special accounting number (from FI module to MM module ). For that, we need to create new custom field in the standard screen (master data) of business partner.
    How to achieve this?
    Is that by creating field exit (create a new field in the standard screen and updating business partner master data with this special accounting number)? IF so, could you please explain how to achieve this little bit clearly?
    THANKS IN ADVANCE... YOUR INPUT IS HIGHLY APPRECIATED.

    Hello Solemn,
    You should catch the FormLoad event of form 134 (Business Partner), and add a static text and editbox. In addition, you need to do the data binding right after adding the item.
    Or, you just use the standard UDF function of B1.
    Hope this helps,
    Nick

  • Need new custom field in header of FV60

    hi guys, i need to be able to add a custom field to the header of FV60. how can i do this? its a date field i need added.
    thanks
    Brian

    done

  • How to add new custom SOAP header when generate webservice?

    Hi
    When invoke an external webservice, SOA Gateway provide a method to add new customized SOAP Header, via extending seeded java function "WebServiceInvokerSubscription".
    And in case of generating a new webservice in EBS, is there some similar method to add new customized SOAP header in the webservice?
    Thanks
    James

    Look at your Payment Process Profile. THere should be a reporting subtab and within that subtab is a Separate Remittance Advice region. I believe that is where you specify the format for the remittance advice document (which is built in XML Publisher). Take a look at that.
    John Dickey

  • Add a custom field in output tab of po header SRM 7.0

    Hello All,
    Please let  me know How to add a custom field in output tab of po header SRM 7.0.
    Regards,
    Neelima

    Hello Neelima,
    Have you already check the note 458591, which help to custom fields creation? I think this note can be relevant for you.
    Best regards,
    Denise Zanuz

  • Add a new tab next to "Basic data 2" in MM01

    Hi All,
    I have to create a new custom tab after u201CBasic Data 2u201D view of Material master Tcode (MM01), I could successfully add the new tab (Using SPRO), but it is being created at the end of all views i.e. after u201CCosting 2u201D tab.
    Kindly help me out in inserting this tab exactly next to u201CBasic Data 2u201D view.
    Thanks in advance !

    Hi,
    You can maintain the order of the views of material master in SPRO under the below path:
    Logistics - General=>Material Master=>Configuring the Material Master=>Maintain Order of Main and Additional Screens Or in  transaction OMT3R
    Note - Before doing any modification first go through the documentation.
    Regards
    DKS

Maybe you are looking for

  • Help me see MR MAGOO...

    About two years ago my daughters iMac, MA199LL/A model A1173, blew its video card. It starts up with the Apple three chord chime followed by the apple logo but then huge different coloured bars/boxes show. . No desktop except those coloured bars/boxe

  • Mass change of the Original System

    Hello Experts!!! We need to do a massive change of the original system to avoid repair tasks. I know that thru SE03 or SM30->TADIR is possible, but we need to do it to all objects in the system.... I think It might exist a standar tool for that... wh

  • Multicast IP address keep changing on music on hold

    Hi I am trying to set up multicast for music on hold on the cucm 9. on the cucm, I enable multicast audio sources on MOH server, using base IP 239.1.1.1, and set increment multicast on " ip address" however the multicast IP address keep changing, som

  • Blu Ray export is corrupted, help!

    When exporting as Blu ray, FCP burns the disc allright, but when I view it with my blu ray player, all the video clip parts of thw movie are replaced with one 2second loop from the beginning of the movie. All photos show correctly though, and the sou

  • I am trying to cancel my annual membership, how?

    However there doesn't seem to any way to cancel an annual membership online. I tried the chat button but it takes me in a loop, and there's no phone number.