Add new depreciation to existing assets

hi experts
can we add new depreciation to existing assets , while creating new assets i can see the depreciation that i have created recently. but for the existing assets i want to add this new depreciation.
venkat

Hi
Yes u can change the depreication
but keep in mind note the date when u chnage the depreciation of existing asset
and check any invoice not pending of asset PO at the time of change the depreciation
Suppose u create a PO with asset, whc\ich is creatd ( suppose machinary rate is 10%)
then u comlete the cycle first this means invoce entry ( MIRO)
then u chnage the depreciation
if any query revert back
Regards
Roobal

Similar Messages

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

How to add new class to existing DC (Web Dynpro project)

Hi,
How can I add new class to an existing DC (Web Dynpro project)?
I tried adding it using File - New - Other - Java - Class, but after a build of the DC the new class (and its contents ) was completely removed.
Then I created a new DC (java project) and created a new class in that DC. This went fine, but I got into problems because of circular referencing between the new & the old DC, so no build was possible.
This can't be difficult, does somebody knows how to do it?
My temporary solution is to add the classdefinition to an exisiting .java file. Very ugly.
Thanks,
Jeroen

Hi Jeroen,
where did you create the class? If the *.java file is placed in the src/packages folder it should not be deleted by a build. (I suspect you created it in the gen_wdp folder?)
Regards,
Marc

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

LDAP: Recommended way to add new objectclass to existing entries?

Can anyone help me with the preferred way to add a new objectclass (with attrributes) to existing entries within a directory (via the javax.naming API)?
I have an application that uses a directory of users. Each user has objectclasses "top", "person", and "inetOrgPerson" with usual attributes.
The application needs to change to add a custom objectclass, say "ourAppClass" (and its attributes), to each existing entry within the directory. I have already successfully defined the schema for the objectclass within the directory.
I cannot find examples showing how to add an objectclass to existing entries. Creating brand new entries with custom objectclassess is straightforward.
When using DirContext.modifyAttributes must I define all the objectclasses again, or is there a way to send only the new objectclass and its attributes only?
Attributes attrs = new BasicAttributes();
Attribute classes = new BasicAttribute("objectclass");
classes.add("top"); // do I need these?
classes.add("person"); // do I need these?
classes.add("inetOrgPerson"); // do I need these?
classes.add("ourAppClass"); // in-house class
attrs.put(classes);
attrs.put("ourCustAtribute", "value1"); //
DirContext.modifyAttributes(dn, LdapContext.REPLACE_ATTRIBUTE, attrs);Does someone have a good example to follow?

I think I have answered my own question. I think I need to use a ModificationItem to add an attribute to the objectclass.
final ModificationItem[] classModification= new ModificationItem[1];
classModification[0] = new ModificationItem(DirContext.ADD_ATTRIBUTE,
new BasicAttribute("objectclass", "ourAppClass"));
dirContext.modifyAttributes(dn, classModification);

Add new Column to existing Primary Key

Hi,
I have a Primary key consisting of 6 columns. Now i want to add new 7th column to that existing key.
Do i need to drop the existing primary key and then recreate agian with 7th field or is there any other way?
Regards,
Jayesh

I think what Joel was really saying is that dropping/recreating a PK is the only way to change the PK column list in version 6 - 9. Who knows about in 10g? Though I doubt that this has changed.
If the table only has one or two more columns that are not part of the key you might consider converting the table to being an IOT (indexed organized table).
HTH -- Mark D Powell --

Maintenance view: add new entry under existing ones

Hi,
I would like to add a new entry in a maintenance view, but keeping the existing entries visible. That is, I want a new line to appear under the older ones, so I can see them, instead of opening a whole new screen with empty lines.
Thanks in advance,
Ivson

If you want to add new field in the view.
Goto SE54 and carry out the following steps:-
1) Enter the name of the table or view.
2) Choose Generated objects.
3) Choose Create/Change. You go to the generated objects maintenance screen.
4) Choose Change. A screen of reasons for changes appears.
Select option(s) and choose Continue.
The new field will appear in the view.

How to add Spare material to Existing Asset Material.

Hello Gurus,
I have a Problem that I made a Asset code of One material, Later On one spare of that
Asset material is Damage. i replace it with new one,
But what i do with new one spare?
Wheater i make new Asset code for it. and if yes then How i link the cost of it to Existing Asset code.
For Example,
I made a Asset code of Computer as
Main Number subnumber
100000 11
Now i replace a Hard disk of Computer to New one. so what I do with New Hard disk,
Wheater I Make new Asset code for it And if yes then How i link the cost of it to Existing Compuet asset code.
I am eagerly waiting your reply.
Regard,
Riten Patel

Hi,
MMAM is the Transaction.
Regards,
Satish

How to update the New Depreciation Area in Asset Master Data

Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
Srinivas

Hi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
   RAFABNEW :
3.1     Indicator: Leave values initial = not ticked.
           Do not set this indicator if you want the system
           to copy the values from depreciation area 01.
3.2     Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard

Adding new depreciation area to assets

Hi,
1.I created a new depreciation area 13( tax depreciation) . When I am executing the transaction AFBN for adding this depreciation area to all the assets, first I am getting the error message
+/- sign rule for the new depreciation area is too restrictive
Message no. AU 113 " and
" Closed fiscal years for areas 01 and 13 differ by more than 1 years ".
2. I am in 4.6C and in OAAR, for depreciation area 13 the closed fiscal year is 2002 and for all others 2007.
3. The OSS note 421549 is already implemented.
Any help for resolving this is highly appreciated.
thanks
Srinivasa Vepa

Hii
as u said the message says that the closed fiscal year for dep.area 01 and 13 is more than one year.
and u also state that the fiscal year close for dep area 13 is 2002 and for all others is 2007.
so first step u need to do is to close the fiscal year for dep. area 13 till 2006.
here the functionality of AA works like it allows only 2 fiscal year to be open at the same time.. so as the dep. area 13 is open since 2003 it will give u an error..
so please try to close all this and i m sure it will solve ur query......
thanks
sejal

How do you add new songs to existing playlist on iphone 5?

Before the update a few months ago I was able to add new songs to an existing playlist by hitting the Edit button. Now I can only delete songs off of a playlist. Has anyone figured out how to add new songs or do I just have to create a new playlist? I really hope I don't because they will all be the same then.

What could I do to be able to add more pages to a document?

How to add a new column to existing Asset history sheet version

Hi Experts,
I would like to one more column in the asset history sheet version for displaying ordinary depreciation and value adjustment in the standard report RAGITT_ALV01 (S_ALR_87011990).
Could you please let me the know the steps to perform this requirement.
Thanks in Advance...
Best Regards,
Chandra.

Hi,
Thanks for your reply.
I have got any help like customizg path in asset history sheet.
I have copied the standard SAP asset history sheet version and trying to add to new fileds according to the requirement.
But it's not saving at all.
Could you Please let me know is there any other method to do this.
Thanks in Advance..
Best Regards,
Chandra.

Is it possible to add new line to existing Blanket Agreement through interface?

Hi All,
I need to add a new line to exisitng list of blanket agreements.
I populated po_headers_interface and po_lines_interface and ran 'Import Price Catalogs' program.
But this is only trying to update existing line instead of creating a new one.
Please clarify whether it is possible to add just a line using the above process?
tried multiple scenarios:
action field in both tables - ORIGINAL - error, doc already exists.
action field in both tables - UPDATE - updates existing line.
action field - (UPDATE in hdr and ORIGINAL in line) - updates existing line.
Thanks in advance.
Girish

Hi All,
It's working now. populated action field as 'ADD' in po_lines_interface and it created a new line.

Can not add new VMS into existing clustered server pool

For some reason, we reinstall VMM (3.1.1-416) with existing UUID and rediscover all VMSs. The process went smooth and the whole system looks clean without dead objects any more. The guest VMs are all working fine. However, the new added VMS in unassigned servers are not displayed in the "Available Servers" when we want to add into existing clustered server pool, but it is shown when we add into unclustered server pool. Anyone has clue or possible way to debug what's wrong.
Thanks,
Shun-Jee Liu

The issue is resolved. The access group in shared iSCSI is not properly configured.

Disks not avialable and cannot add new disks to existing pools

I have a few disks that are RAW and I want to add them to existing pools. However, only 1 disk shows up as a Primordial disk and the others do not. I cannot add these drives to a new volume and when I try to add any drive to an existing
pool, the add disk option is greyed out. I have search everywhere to resolve this but no luck.
What is interesting is one of the drives that shows available for a volume is the drive I have associated to backing up the OS on the server itself and is initialized, i.e. not RAW.

Hi,
Please try to run the following commands in PowerShell to obtain the information about disks:
Get-physicaldisk
Get-disk
In additional, the physical disk added to a storage pool must be 4GB or larger. If the space is less 4GB, the disk will not appear in the storage pool window.
For more information, please refer to the thread below:
Storage Pool in WS2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d230ef80-8791-4eaf-84b5-a41b8f7fef10/storage-pool-in-ws2012?forum=winserver8gen
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Add new depreciation to existing assets

Similar Messages

Maybe you are looking for