Add new device to existing library

I just ordered a touch for my daughter Bday.
She has an ipod and associated itunes library now.
What do I need to do to add the touch to her existing library? Will there be a new or different itunes software?
She'll probably dump the old ipod for the touch, but my wife might want the old ipod, can the share the library, they will probably have a few differences in the music they like.
Thanks

What do I need to do to add the touch to her existing library?
Connect it and set it up when prompted.
Will there be a new or different itunes software?
Not if you're already using the current iTunes version.
She'll probably dump the old ipod for the touch, but my wife might want the old ipod, can the share the library, they will probably have a few differences in the music they like.
Yes. Click here for options.
(43961)

Similar Messages

Ever since downloading Itunes 11 I have not been able to add new cds to my library. I keep getting a message that an error occured while converting the file. An unknown error occured (-69).

Ever since I downloaded Itunes 11 I have not been able to add new CDs to my library. I keep getting this message: Error occured while converting the file "..." An uknown error occured (-69).

Did you already try to restore your device? Restoring iPod to factory settings
Other solutions for this errror are mentioned here: iTunes: Error 13019 during sync

Add new depreciation to existing assets

hi experts
can we add new depreciation to existing assets , while creating new assets i can see the depreciation that i have created recently. but for the existing assets i want to add this new depreciation.
venkat

Hi
Yes u can change the depreication
but keep in mind note the date when u chnage the depreciation of existing asset
and check any invoice not pending of asset PO at the time of change the depreciation
Suppose u create a PO with asset, whc\ich is creatd ( suppose machinary rate is 10%)
then u comlete the cycle first this means invoce entry ( MIRO)
then u chnage the depreciation
if any query revert back
Regards
Roobal

LMS 3.2 - Can't add new devices to RME 4.3.0

Hello,
since some days I get the error message
Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!No bean specified
if I want to add new devices to the RME.
The last change I did was to update the device packages directly over cisco.com.
But I can't tell if the problem persists since the update or not...
Thanks for any advice!
Sven

Hi,
thanks for the reply!
I checked it once again.
If I want to add the 2960S device to RME I will get this failure message:
Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!Cannot find bean dcrdeviceTable in scope null
The other message "Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!No bean specified" is a little bit strange...
Today I will get this if I want to add some other devices together with the 2960S device.
I think that I didn't mark the 2960S yesterday....but I can't be 100% sure.
It looks like that the problem is this unknown device.
Is there a package for this 2960S device or what can I do to get it in RME?
Thanks a lot!
Sven

Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do!thx

Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do?!thx

You purchased a gray market phone. The iPhone is not available for sale from any Authorized source in Ukraine. There are no authorized or supported carriers in Ukraine.
Take it ack and get your money back.
If you want an iPhone, go to a country where unlocked iPhones are available for legitimate sale and purchase one directly from Apple.

Add New Files To iTunes Library

Is it possible to set up a folder in the finder so that when new audio files are placed inside (either copied, created or downloaded), they will automaticly be added to the iTunes library? Is there a folder action or applescript I'm missing or something? Or another way?
Thanks in advance.
-- steph
MacBook Pro Mac OS X (10.4.8) 2.16 MHz, 1 Gb RAM

I've created a folder action for a folder (called it 'iTunes dropbox') on the desktop to do so.
This is how I've set it up:
• Create a new folder (on the desktop or whatever location)
• Run Automator
• Select 'Finder' in the Library (left) pane, then select 'Get Specified Finder Items' from the Action (middle) pane and drag it to the right pane.
• Select 'iTunes' in the Library, select 'Add Files to Playlist' and drag it below the 'Get Specified Finder Items' action in the right pane.
You can choose to add the file to the Library only, or also to an existing or new playlist.
• To save this workflow as an folder action, choose 'Save As Plug-in...' from the file menu.
• Choose an appropriate name (e.g. 'tunetolib').
• At 'Plug-in for:', choose 'Folder Actions'
• At 'Attached to Folder:', choose 'Other...' and navigate to the folder you created before.
• If you did not enable folder actions already, tick a checkbox that says so. If you already enabled it, you won't see this option.
• Click 'Save'
Now it's time to test the 'dropbox'.
Just drop an AAC, Apple Lossless, AIFF, WAV or mp3 file in the folder and if the exact file does not already exist in iTunes, it will be (should be) added to the library.
Hope this helps.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.1

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

How can I stop iTunes from duplicating and auto playing my Internet streams whenever I add new media to the library?

I have been a mac user for a good few years now and use iTunes regularly.
Since the recent updates to iTunes I have been experiencing an issue that is becoming extremely frustrating and annoying!
Whenever I add a new item to my library, iTunes starts to play the Internet streams that I have opened over the years and duplicates them in the library in a playlist called "Internet songs". While the library is updated I cannot stop the playback. I have a very large library and it takes some time for all of the organising etc to finish.
This was never an issue with previous versions of iTunes.
Has anyone else had this problem? I have searched but can't find any mention on the Internet.
I really don't want to listen to these tracks anymore!!!
Deleting from the library does not stop this issue from occurring either.
Many thanks
Matt

we could not complete your itune request An unknown error occurred (12002) pls solve my problam??

How to add new class to existing DC (Web Dynpro project)

Hi,
How can I add new class to an existing DC (Web Dynpro project)?
I tried adding it using File - New - Other - Java - Class, but after a build of the DC the new class (and its contents ) was completely removed.
Then I created a new DC (java project) and created a new class in that DC. This went fine, but I got into problems because of circular referencing between the new & the old DC, so no build was possible.
This can't be difficult, does somebody knows how to do it?
My temporary solution is to add the classdefinition to an exisiting .java file. Very ugly.
Thanks,
Jeroen

Hi Jeroen,
where did you create the class? If the *.java file is placed in the src/packages folder it should not be deleted by a build. (I suspect you created it in the gen_wdp folder?)
Regards,
Marc

Re: "How do I add a device to Firefox Sync?" There is no link for add new device.

The code for the new device is some 21 alpha numeric characters long. Only a few of the characters fit in the three boxes -- they do not all fit.

The sync key is 26 characters and needs to be entered on the account page (I don't have the device), but if you have the code supplied by another device then you only have a code of 12 characters.
* https://support.mozilla.org/kb/how-do-i-set-up-firefox-sync
* https://support.mozilla.org/kb/add-a-device-to-firefox-sync
* https://support.mozilla.org/kb/find-code-to-add-device-to-firefox-sync

LDAP: Recommended way to add new objectclass to existing entries?

Can anyone help me with the preferred way to add a new objectclass (with attrributes) to existing entries within a directory (via the javax.naming API)?
I have an application that uses a directory of users. Each user has objectclasses "top", "person", and "inetOrgPerson" with usual attributes.
The application needs to change to add a custom objectclass, say "ourAppClass" (and its attributes), to each existing entry within the directory. I have already successfully defined the schema for the objectclass within the directory.
I cannot find examples showing how to add an objectclass to existing entries. Creating brand new entries with custom objectclassess is straightforward.
When using DirContext.modifyAttributes must I define all the objectclasses again, or is there a way to send only the new objectclass and its attributes only?
Attributes attrs = new BasicAttributes();
Attribute classes = new BasicAttribute("objectclass");
classes.add("top"); // do I need these?
classes.add("person"); // do I need these?
classes.add("inetOrgPerson"); // do I need these?
classes.add("ourAppClass"); // in-house class
attrs.put(classes);
attrs.put("ourCustAtribute", "value1"); //
DirContext.modifyAttributes(dn, LdapContext.REPLACE_ATTRIBUTE, attrs);Does someone have a good example to follow?

I think I have answered my own question. I think I need to use a ModificationItem to add an attribute to the objectclass.
final ModificationItem[] classModification= new ModificationItem[1];
classModification[0] = new ModificationItem(DirContext.ADD_ATTRIBUTE,
new BasicAttribute("objectclass", "ourAppClass"));
dirContext.modifyAttributes(dn, classModification);

Synching new Ipod to existing library

Sorry if this is really basic.... I have a new Ipod classic (used to have a mini) and I want to start using it and synch it to my existing library. I have no idea where to start. I have got the most up to dtae version of itunes, but the synch option seems greyed out in the file menu. Do I have to de-install my old Ipod or is it possible to have 2 synched to the same library???
Thanks in advance.
Fiona

When you first connect the iPod, you see the set up assistant/licensing agreement and of course you must click "agree" in order to proceed.
Then you'll be prompted to name the iPod and choose a method of auto syncing your iPod. If you want to manually mange the content of your iPod, remove the check mark from the auto sync option. (It may be already set to manual and that's why the sync option is greyed out). Click "done" and that takes you to the registration screen. Then your done, and you can begin transferring music from your iTunes library.
You can have as many iPods as you like synced to one iTunes library.

Add new Column to existing Primary Key

Hi,
I have a Primary key consisting of 6 columns. Now i want to add new 7th column to that existing key.
Do i need to drop the existing primary key and then recreate agian with 7th field or is there any other way?
Regards,
Jayesh

I think what Joel was really saying is that dropping/recreating a PK is the only way to change the PK column list in version 6 - 9. Who knows about in 10g? Though I doubt that this has changed.
If the table only has one or two more columns that are not part of the key you might consider converting the table to being an IOT (indexed organized table).
HTH -- Mark D Powell --

Maintenance view: add new entry under existing ones

Hi,
I would like to add a new entry in a maintenance view, but keeping the existing entries visible. That is, I want a new line to appear under the older ones, so I can see them, instead of opening a whole new screen with empty lines.
Thanks in advance,
Ivson

If you want to add new field in the view.
Goto SE54 and carry out the following steps:-
1) Enter the name of the table or view.
2) Choose Generated objects.
3) Choose Create/Change. You go to the generated objects maintenance screen.
4) Choose Change. A screen of reasons for changes appears.
Select option(s) and choose Continue.
The new field will appear in the view.

Cannot add new files to iTunes library.

My itunes library is run through my external hard drive. This hasn't been a problem, but now iTunes will not let me add new music files to my library. How do I fix that?

Ditto. To compound the problem, I upgraded to Mountain Lion. I was trying to import videos and iTunes 10.6.3 starts, then the spinning wheel of death comes up about 1/2 way thru. After a couple hard boots to get the system back, I tried with a simple MP3 file. Tried ADD TO LIBRARY and drag and drop - Nothing.

Add new device to existing library

Similar Messages

Maybe you are looking for