Add new email address button and tool bar no longer appears.

Was adding email addresses and for some reason the address tool bar and add new address button disappeared. Without them I can not add any more email addresses.

Thanks for the help. F-10 got the menu up so I could turn on the address book tool bar.
Best,
John

Similar Messages

  • Exchange 2010 add new email address space and additional smtp address to all recipients

    HI
    Our company is being bought and we need to change the email address for every recipient within the business group/user.
    I have added the new domain to the Accepted Domains and have confirmed that if I manually change a users smtp address that mail flow works and the postmaster account receives email.
    looking in the E-mail address policies section within the EMC we currently have 2 polices one for the current company policy call company.co.uk with a priority 1 and one called Default policy.
    when I try to edit these I get a warning message which states that this policy was created with an earlier version of exchange I have looked on our exchange 2003 environment and have found the polices and can edit them.
    Now my questions are 
    1. should I create the policy on the exchange 2003 environment or 2010
    2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
    3. I must be able to preserve the old addresses and must make the new address space the primary address?
    if anyone could help with the steps required or if there are any gotcha to avoid.
    thanks

     1. should I create the policy on the exchange 2003 environment or 2010
     You have to create in Exchange2010
    2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
    Email address policy will change the email address if applied immediately except for the users which has "Automatically update email addresses based on e-mail address policy" option turned on
    You will get the list of users with "Automatically update email addresses based on e-mail address policy" option turned off by the below command.
    Get-Mailbox -ResultSize Unlimited | Where {$_.EmailAddressPolicyEnabled -eq $False}
    3. I must be able to preserve the old addresses and must make the new address space the primary address?
    Yes but you can keep only one as replying address.
    Please keep both address in the email address policy to preserve old email address to the users.
    If you want an autoreply, then use a hub transport rule in Exchange an Outlook rule and allow auto-replies to the internet. (auto-replies to the outside network is not a good idea)
    Here is a similar case
    http://exchangeserverpro.com/email-address-policies-in-mixed-exchange-20032007-organisations/
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Unable to reset or add new email addresses on HP Officejet Pro 8600 Premium e-All-in-one N911n

    Unable to reset or add new email addresses on my HP Office jet J4680

    Hi johndavis196,
    Welcome to the HP Support forums.  I see that you are trying to add new email addresses to your Officejet J4680 printer.
    To better assist you, would you please provide some additional information:
    How is the printer connected (USB cable, ethernet, or wireless)? The Officejet J4680 supports all three methods.
    What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
    Where are you trying to update the email addresses?
    Are you encountering any error messages? If yes, what is the error message and where is it displayed (printer or computer)?
    What steps are you taking before you are stopped?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Add new email address question

    Hello,
    I want to add a new email address to my .mac account. When I tried to do that, a week ago, I was informed that I would have to delete one of the addresses I have already, so I did that. Then I was told I would have to wait until January 8th before I could add another address. OK, so I've waited. Not a huge problem at all.
    But today is January 8th (almost 6am PST) and I'm not being allowed to add the name. I suppose I can wait longer if need be, but does anyone know why this is happening? Will I have to wait until January 8th has gone by?
    Patrick

    Not answered but the question is no longer relevant

  • HT5621 I am having trouble with my Apple ID and AppStore Here are the steps I have taken and the results: 1.     Changed my Apple ID with new email address. 2.     Changed my iCloud with above new email address. 3.     NOW - Apple ID appears correct in Ap

    I am having trouble with my Apple ID and AppStore
    Here are the steps I have taken and the results:
    Changed my Apple ID with new email address.
    Changed my iCloud with above new email address.
    NOW - Apple ID appears correct in AppStore Settings, iCloud and AppStore*
    If I scroll to bottom of screen in *App Store/Featured, I can see that the Apple ID is my new email.
    Upon “updating” Apple ID reflects OLD email.
    Deleted accounts, re-added accounts.
    Signed out and signed in with new UN/Email
    Issue remains the same.

    To migrate your data to a new iCloud account go to Settings>iCloud and turn off all synced data (contacts, calendars, etc.), when prompted choose to keep the data on your phone.  After everything is set to off, scroll to the bottom and tap Delete Account.  Next, create the new iCloud account on your phone and turn on syncing for contacts, calendars, etc again.  If prompted, choose Merge.  This will upload your data to the new iCloud account.

  • Add new email address for alarm

    How do I add a new email address for alarms to be sent to?
    Thank you!

    Ming Ming Su-Brown,
    Read: iCal 3.0 Help: Inviting guests to an event. Post back if you have any questions on that help article.
    ;~)

  • How do I change my icloud account from my old email address to my new email address, the old one is no longer accessable!!

    Hi
    I changed my old email address over a year ago and my icloud still only recognises the old email address on my iphone 5, how do I go about changing it, if I do not have access to a password, to my new email address?  My iTunes is on my new email address but not my icloud account.
    For some reason it only recognises my daughter email, as we share iTunes account.
    Please could you help with what I could do to change it??

    Oops sorry, that doesn't make sense, I don't have access to my old email address, we closed the account!!  I obviously do have access to my new email address but its not letting me change to my new email address!!

  • Need more options to add new email address

    Most of my setup works perfectly.
    However, one of my email accounts requireds the [email protected] as a username for login rather than simply name. The result is that I get the error: "Unable to connect to the server. Please try again later." when I try to add the email account.
    The workaround I use at the moment is to use an incorrect domain.com part for the original email address. The setup process then allows me to enter the mail server names and ports specifically. I can now receive pushed email on my phone.
    However, when I try to send email from that account, the mail is rejected by the mail server since the "from" email address doesn't exist (since the domain.com I used is invalid.)
    I REALLY would like to be able to specify all settings manually right from the start of the setup process in an "advanced setup" step. Give me the control to enter what I want, and leave the simple automatic works-most-of-the-time-for-most-people approach for those who don't need to flexibility.
    Solved!
    Go to Solution.

    I enter in my correct details on the "add new account" page.  I get the same error "Could not connet. Please try later".  Then enter this address into the browser  https://email.nokia.com/account/addEmailMoreInfoNoCorpSupport.action
    (note, the first part of this link should be the same as the address in the bar BEFORE you type this.  If your address doesn't start with email.nokia.com then replace that with whatever you have)
    This takes you to the manual settings screen where you can enter all the settings, but with the correct email address in the annoying read-only field!
    Dear Nokia - can this have been so hard to allow in the first place? 
    Message Edited by dazz19 on 29-Aug-2009 08:44 AM

  • Cant add new email addresses

    I add anew email it stays there until I exit out of thunderbird

    The inability to make changes to an address book can indicate that the address book data file is corrupt.
    You can use '''Tools|Export''' to export the affected address book file (use the LDIF option) and then '''Tools|Import''' to re-import it. Give the file you export to a distinctive name, as it's all too easy to end up with two address books with the same name, such as "Personal Address Book".
    Two address books, '''Personal Address Book''' and '''Collected Addresses''' are hard-coded into Thunderbird and you're not allowed to delete them from inside Thunderbird. So, if the affected book is one of these,
    * Export it
    * Close Thunderbird, locate its profile, and delete ''abook.mab'' (for Personal Address Book) or ''history.mab'' (for Collected Addresses).
    * Restart Thunderbird, whereupon it will re-create the deleted address book
    * Use '''Tools|Import''' to import your LDIF file
    * Open the imported address book, select all (ctrl+a) and drag its Contacts to where you really want them.
    Other, that is, user-defined, address books can be freely deleted from within the Address Book window.

  • Firefox 4 was functioning well until two days ago. Browser will not open to my home page and tool bars do not appear. Was able to find toolbar but "back" button does not work. What changed?

    Firefox now opens to a blank page and the word Firefox appears in upper left hand corner in orange. It, apparently, contains a drop down menu. I can navigate from here but "back" button does not function in any website. How do I get it back to where it was previous to this change?

    You can change this if you don't mind peeking under the covers into Firefox's about:config preferences editor.
    (1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste newtab and pause while the list is filtered
    (3) Double-click the browser.newtab.url preference and enter the desired value:
    (i) Page thumbnails (default)
    browser.newtab.url = about:newtab
    (ii) Blank tab
    browser.newtab.url = about:blank
    (iii) Built-in Firefox home page
    browser.newtab.url = about:home
    (iv) Any other page
    browser.newtab.url = full URL to the page
    Press Ctrl+t to open a new tab and verify that it worked. Fixed?

  • Add new email header line and add Bcc recepient to this additional header.

    Hi Folks,
    iMS5.2p1, Solaris 8.
    Just after a few directions. I have a 'catch-all' mbox, that customer POP's. The customer then uses MDaemon to deliver email, based on rules to correct recepients, works fine until a Bcc comes in, as quoted below.
    Why doesn't MDaemon parse the BCC header?
    BCC only works with SMTP mail. By definition, the carbon copy is "Blind".
    There are no headers in the message which can be parsed using the POP3 method that would provide the address. The only hope for these kinds of messages is to get the ISP to stamp the message file with the delivery information from the SMTP session during delivery to the ISP. For example, when the person sends the BCC message to the ISP hosting the mail, some of them stamp a header called "Deliver-To:" into the message. MDaemon could pick up on such a header if it existed.
    I know I would have to tackle this with either a re-write/mapping/conversion, but not sure what the best approach, ie to add and rewrite the Bcc, recepient into the new 'Deliver-To:' header.
    Any good solutions/tips ?
    Cheers folks.

    Hi Jay,
    Sorry if there is any confusion. The customer at his premises has a server running this mail app. called MDaemon, which uses filters to deliver to local mboxes for their users. The customer in question just wanted a 'catch-all' mbox with iMS for his domain (which we host), to just POP3 this mbox and then the customer's MDaemon app, parses through filters to deliver to correct local mbox. They didn't want to have each user's mbox hosted on iMS....as yet anyway, thus the need for 'catch-all' delivery of email for the customer domain to one iMS mbox.
    The problem is with any Bcc email for customer's domain. As described POP3 as per definition hides the Bcc line, thus MDeamon filters at customer end will fail delivery to intended recepient. Thus the doco from MDaemon as explained to me from the customer can handle additional header lines and parse that way. Thus the need to add the recepient in the Bcc line to an additional header (ie. Deliver-To: [Bcc smtp recepient]). Then as MDeamon doco says it can be setup to parse and deliver to correct local mbox. I hope that my be a little clearer.
    So I need to on iMS rewrite any Bcc recepient for customers 'catch-all' mail domain and add another header line (ie. Deliver-To: [Bcc smtp recpient]). So when customer POP's iMS mbox, Mdeamon at customer's end will parse and deliver locally.
    Hope that makes sense and the best way to add an additional header and take the original Bcc line and add to to new header is.....hopefully a pointer from your good self.
    Cheers.

  • How can I get an invoice from the Apple store note that the original invoice may be burned with the house though Bamkmkm Send to Olga miles is my new (email address removed)and Thanks

    how can i get an invocce from the Apple store UK ?
    Message was edited by: Host

    Find the Apple Customer Support phone number for whichever country you're in and call them for assistance.

  • IMovie sound disappears and tool bar no longer works

    I was updating an existing iMove project, adding chapters, and this put the sound out of sinc. I deleted some of the music clips, then all of the music stopped playing. Now basically none of the tools are working except the "Help" link. I can't even export it to a new file. I does say that I can open "Open Recent" under File and it lists my current project. I'm afraid if I try that I'll lose all my recent changes.
    Any suggestons? I have 42GB available space, so I don't think that's the problem.

    Some follow up. I finally shut down the project, repaired permissions and threw away the imove.plist. Not sure which action helped, but when I reopened it I had music, but not my changes adding chapter titles. Not a big deal to fix.

  • What is the best way to notify all contacts of a new email address?

    I am changing my email address.  I had the previous one for many years, somewhere around 15.  What is the best way for me to let my contacts know about the new email address?  And is there anything else I need to do to smooth out this process?  Obviously I have to let merchants, websites and services know as well.
    Any hints or tips you have would be welcome.

    In Addrss Book make a Group of all your contacts.  Open Mail and in the To: field put the name of the Group. Write your text then click on Send button.
    Or send everyone a postcard.

  • When sending an email I used to be able to add a distribution list from my contacts, I now have to add each email address individually, does anyone know how I can add the whole list?

    When sending an email I used to be able to click on a distribution list in my contacts and it would add all the email addresses, I now have to add each email address individually and this takes a lot of time.  Could someone tell me how I can add a distibution list/group to my emails?

    Barney,
    I have four groups.
    I just typed the name of one of those groups in the To field on the iPhone's email, and received:
    Invalid Address
    "<group name>" does not appear to be a valid email address.  Do you want to send it anyway?
    I clicked continue and it remains in my outbox.
    Help is appreciated.
    Thanks,
    Michael

Maybe you are looking for