Add new field in the Create Support Message Popup Screen

Hi Experts,
I need to create Project Code Field in the standard popup screen Create Support Message
Suggest me any Badi or FM or Bapi or Enhancement to create a new field and update the field value to the Support Message created.
Please let me know if this is possible or not?
Thank You,
Sowjanya Sreekrishna

Dear Abhijit
Even after doing PGI, there are some fields which are in editable mode in delivery.  For example, in VL02N, if you select "Goto --> Header --> Shipment, you can see fields like Bill of Lading are in editable mode.
If you specify what your requirement is, then probably, a better option can be given.
Thanks
G. Lakshmipathi

Similar Messages

  • How to add new fields in the Create Suppport Message Screen

    Hi experts,
    I have a requirement which is to add 3 selection fields in the Create Support Message Screen. The 3 fields are Category, Subject and Solution. The value of these 3 fields must aurtomaticallly populate the same fields in the Support Message screen in the Solution Manager for each message sent.
    Is this functionallity possible? If yes, please give me some ideas how to do it..
    Points will be rewarded for helpful answers.

    Hi Eric,
    Yes it is possible. Use statements SET and GET parameters in your program.
    1. Get parameter ID for the fields Category, Subject and Solution from the data element. or Set parameter ID.
    2. Use GET Statement in the PBO of the Support Message screen .
    GET PARAMETER ID 'XYZ' FIELD <field-name>.
    "XYZ is the parameter ID
    "<field-name> - field should have the field . not in quots
    3. Use SET statemet in the PAI of the Create Support Message Screen or where the value is available for the 3 fields.
    SET PARAMETER ID 'XYZ' FIELD <field-name>.
    "XYZ is the parameter ID
    "<field-name> - field should have the field . not in quots
    4. Parameter ID : Double click on the data element of the specified field->Select Further Characteristics TAB -> u can see the parameter ID or U can set the parameter ID there .
    It works. Try it.
    Regards,
    Venkat.O

  • How to add new fields to the system form (Ex.expenses to a/r invoice form)

    hi
    can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
    i want to add expenses field to system a/r invoice form and connect data base also.
    i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
    reply soon plz..
    thankQ

    If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

  • How to add new fields to the DME file in F110

    Hi,
    We have a requirement add new fields to the file that is used in  F110.
    .I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
    Can anybody please help me in resolving the issue.
    Thanks
    Venkat
    Edited by: Venkat R on Jun 8, 2009 8:45 AM

    Hi,
    There is no function module for that, We have created our own function module and attached to that field.
    Refer the below code. This will fetch the document number.
    DATA: lwa_item   TYPE dmee_paym_if_type,
            l_fpayp   TYPE fpayp,
            l_fpayhx TYPE fpayhx,
            first_flag TYPE c,
            lv_lifnr   TYPE lifnr,
            voucher_id TYPE string,
            voucher TYPE string,
            invoice_id TYPE belnr_d,
            voucher_len1 TYPE i,
            voucher_len TYPE i.
      TYPES:
      BEGIN OF lt_regup,
            xblnr TYPE xblnr1,
            belnr TYPE belnr_d,
      END OF lt_regup.
      DATA: lt_regup TYPE STANDARD TABLE OF regup,
            lv_regup TYPE regup.
    Hope this helps.
    Raja.A
    Edited by: Raja.A on Feb 16, 2011 7:17 PM

  • MM-SUS:You can add new fields in the BSP?

    Hi Gurus,
    I wonder if you can add new fields in the BSP of invoice in SUS.
    I need to enter new fields and then to perform validations using these new fields.
    know how to work toward a solution?
    Cristian

    Hi Cristian,
    As Akash has mentioned go to BSP application SRMSUS in SE80. Here you can copy standard invoice views and controler to z and then change them.
    You can then create Z tables to store all values entered in this screen. You can ask your programmer to put validity checks accordingly.
    Regards,
    Nikhil

  • CRM  IC Winclient - How to add new fields in the BP Search of TRX CIC0

    Hello Experts,
    I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
    Can you help me?
    Thanks in advance.
    Caíque Escaler

    Hi
    make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
    in spro in Define customer-specific search control -> mark fields with X.
    and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
    you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
    Regards
    Radek

  • Add new fields in the header of  RFITEMAR

    hi,
      i want to add new fields in the header of RFITEMAR report ,so first i copy i to zRFITEMAR ,then i want to add
                           " Total Quantity "   in the header after City field .
    can any one help me????????
    please ,, i waiting your answers..
    thank you......

    hi ,
       thanks for your response , but first i try to copy the function then it give an error as it is reserved for sap , so i change it's name and copy it and change function group to z also then it  relese an error for function pool , any way.
    where can i make change in that function .
    and how can i copy it . please tell me every think in more detials.
    waiting
    thanks.

  • Add new field infotype "z" in logical database selection screen pnp

    Can add new field infotype "z" in logical database selection screen pnp
    I could explain how to realize
    Thanks

    In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
    u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
    u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
    "Allocation operative area to optional delimiter
      IF NOT p_aroper IS INITIAL.
        DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
              wa_texpr TYPE rsds_expr,
              lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
              wa_rsds_expr_tab LIKE rsdsexpr.
        REFRESH lt_rsds_expr_tab.
        wa_rsds_expr_tab-arity = '0'.
        wa_rsds_expr_tab-fieldname = 'OBJID'.
        wa_rsds_expr_tab-option = 'EQ'.
        wa_rsds_expr_tab-low = p_aroper.
        wa_rsds_expr_tab-high = '00000000'.
        MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
        APPEND lt_rsds_expr_tab.
        REFRESH lt_texpr.
        wa_texpr-tablename = 'PA9004'.
        wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
        MOVE-CORRESPONDING wa_texpr TO lt_texpr.
        APPEND lt_texpr.
      pnpdynse[] = lt_texpr[].
      ENDIF.
    English is the forum language.
    Edited by: Rob Burbank on May 18, 2011 11:41 AM

  • How do I add new fields to the 'Customer Data' tab under the BP

    I had previously found a screen in the SAP GUI to add fields so that they would show up on the 'Custmer Data' tab under the Business Partner screen. I thought it had been somewhere in se80 but I cannot find it again. Does anyone know where this is? Thank you!

    Hi Mark,
    You can do this using transaction EEWB. This is the Easy Enhancement Workbench.
    within this, you can use the wizard which will guide you through a step by step process to add the fields you need. Basically, there are 2 ways to add new fields  :
    1. Add new fields - this adds fields to table BUT000, but places the fields on a new tab called 'Customer Data'
    2. Add new attributes table - creates a new table and links it to BUT000 using the partner number.
    Hope this helps you.
    Cheers,
    Rishu.

  • Addition of new field in the "Create limit item" shopping cart

    Hello Gurus,
    I have a request in my project to add the company code field to the basic data for the  "create limit item" shopping cart.
    Thanks

    Hi Kedar
      Here are the steps....
    1. Create a Custom field in SRM and append it to SC table structures in SRM
    2. Add this field to the Custom field config for meta data at Item level in IMG>SRM Server> Cross application basic settings> Extensionsand and field control> Configure field control --> Configure control of fields at item level
    3. THen find the respective web dynpro application and component for the shopping cart portal UI screen where you want the field to appear. You can do this by right click on the screen area and then select More Field Help
    4. Go to SE 80 and enhance the respective webdynpro view by adding the custom field to the Context of the VIew and then adding it to the layout of the view at respective location. After doing this create a binding between the layout field and the context.....
    More information around ABAP UI Flexibility can be found at:
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=%22abapUIFlexibility%22
    Regards
    Virender Singh

  • How to add new fields in the EBP front end..

    Hi All,
    Can any one let me know the process of how to add new fileds in the shopping cart creation screens by using the "Tag Browser" option in the Object navigator.
    Best Regards,
    Mahesh. J

    Hi
    <b>Please go through the following links for more details and examples -></b>
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/8c6eeb2d8911d596a000a0c94260a5/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/d3/5ecbe22a8a11d5991f00508b6b8b11/frameset.htm
    This will definitely help.
    <u>For adding customer fields to the Shopping cart, you need to refer SAP OSS Bote 672960 and 485891.</u>
    Do let me know, incase you need any other details.
    Regards
    - Atul

  • Add new fields on the header screen of COR1

    Hi Experts,
    I am new to this type of work, please help me in doing....
    My requirement is, to add one field on the header details of the COR1 from a Z table.
    Can anyone please tell me how to handle this.
    I searched the regarding this in SDN but i had not got any solution.
    Can any one please tell me how to handle this(screen shots will be more helpfull).
    Please take it as priority.
    Thanks in advace,
    Kruthik
    Edited by: kruthik_06 on Jun 20, 2011 9:04 AM

    Hi all,
    I need to know if is it possible to add a custom field in COR1 for process order. I searched forum for something about this, but cannot find anything.
    can anybody please suggest me something ?
    thanks
    Kruthik

  • Add new field in the report VL06O - List outbound deliveries

    Hi,
    In the report VL06O -> List outbound deliveries, we have to add a new column that will show the INCOTERM (KNVV-INCO1). How can I do that please? using User Exit or a BADI? Which one?
    Thanks in advance.
    Saida.

    Hi,
    Exactly, this is the solution. Thanks a lot.
    In fact, we have to add this field to the structure LIPOV, use the user exit EXIT_SAPLV50Q_001 to get this field. But we must also execute the program BALVBUFDEL to set the system Buffers. Then the field will appear in the list of Hidden fields in the transaction VL06O.
    Saida.

  • Can we add new fields to the seeded AdvanceTable

    Hi,
    I wanted to add new fields like LOV's to the seeded Advance Table AccountsDistsAdv Table in the page CheckoutDistdPG. This table is associated to the View Instance PoReqDistributionsVO. I am planning to add 6 LOVs to this table. How can I take the view attributes if I add these fields to the seeded Advance Table as I can be able to take from PoReqDistributionsVO only which are not available in this case.
    Can you please let me how can I do this.
    Thanks,
    HC

    Hi
    See data is coming from LOV VO that is fine. But as you want to save this data as well while navigating from this page to other and back to this page. In that case There must be a
    VO based on which all columns of the advance table be based on. So you have to attach your fields with that VO then you should be able to navigate as well.
    More precisely i will say that for LOV field there will be two VO one that will populate the data of LOV and second that will save the value that has been picked from the LOV.
    Hope i make it clear!!!
    Thanks
    AJ

  • Add new field in the delivery document

    Dear Guru ,
    I want to add one Field  in the delivery document and that should be open after PGI done .Can you please help how to create one additional field in the delivery document.
    Thanks in advance ..
    Regards,
    Abhijit ...............

    Dear Abhijit
    Even after doing PGI, there are some fields which are in editable mode in delivery.  For example, in VL02N, if you select "Goto --> Header --> Shipment, you can see fields like Bill of Lading are in editable mode.
    If you specify what your requirement is, then probably, a better option can be given.
    Thanks
    G. Lakshmipathi

Maybe you are looking for