Add new fields in SAP transaction IW22

Hello,
I want to add 2 new fields in SAP standard transaction IW22. I checked the package for this transaction and it is IWOC. I searched the exits for package IWOC but was not able to find any screen exits for it.
Kindly help me on how I should proceed with it.
Regards,
Parag

Please check these
User exit/ Business Add-in              Description
User exit
IWO10026                                User check on setting status 'Do not perform'
IWO10027                                User exit: Generate user-defined settlement rule
IWOC0001                                Create PM/SM notification: Determine reference object
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
Business Add-in
IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample

Similar Messages

How to add new fields to j1is transaction

hi,
i need to add new fields to the entry screen transaction j1is, or at least i want to change the discription which is showed in aditional data screen line data1,data2,data3.
is it possible to change those with out having access key.
thanq,
rajesh.k

hi,
yes, i was poor in exits side i heard their is no need of accesskey if user exit was available for that transaction but hear i didn't find any screen exits, did u know any screen exits.
did any one know where the additional data in j1is was effect?
thanq,
rajesh.k
this was placed as answer but my qustion not answered please consider it as un answered and send ur valuebul suggessions.

Add New Fields in MB1A transaction

Hi ,
I need to add new fields (GOITEM-HSDAT, GOITEM-VFDAT) for some mov. types in the MB1A transaction, I´ve looked in OMJJ transaction but I couldnt find theses fields in order to add them.
Thnks
Luis G.

better go into your material master and maintain shelf life data in storage location view.
This will do trick and the fields will show up in the movments

How to add new fields in SAP-Query

Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.

hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
         matnr like mara-matnr,
         erdat like mara-erdat,
         end of itab_mara.
data : begin of itab_marc,
         matnr like marc-matnr,
         werks like marc-werks,
         end of itab_marc.
data : begin of itab_final,
         matnr like mara-matnr,
         erdat like mara-erdat,
         werks like marc-werks,
         date like sy-datum,
         status(10) type c, * new fields
         end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
        Vinutha YV

How to add new fields in sap copied standard form using itcsy structure

hi guys,
i want add some fields in sap script copied standard form using itcsy structure.
let me know the procedure with any example.
thanks,
anitha.

Hii anitha
plz c code below
Syntax goes like this
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
Example:
In script form
/: PERFORM READ_TEXTS IN PROGRAM 'Z08M1_FORM_EKFORM1'
/: USING &EKKO-EKORG&
/: USING &EKPO-WERKS&
/: USING &EKKO-EKGRP&
/: USING &EKKO-BSTYP&
/: CHANGING &COMPNAME&
/: CHANGING &SENDADR&
/: CHANGING &INVCADR&
/: CHANGING &COMPADR&
/: CHANGING &COVERLTR&
/: CHANGING &SHIPADR&
/: CHANGING &REMINDER&
/: CHANGING &REJECTION&
/: CHANGING &POSTADR&
/: CHANGING &LOGO&
/: ENDPERFORM
In program
FORM Read_texts - To extract the standard texts from the table *
FORM READ_TEXTS TABLES IN_PAR STRUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA : L_EKORG TYPE EKORG,
L_WERKS TYPE WERKS_D,
L_BSTYP TYPE BSTYP,
L_EKGRP TYPE BKGRP.
READ TABLE IN_PAR WITH KEY 'EKKO-EKORG' .
CHECK SY-SUBRC = 0.
L_EKORG = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKPO-WERKS' .
CHECK SY-SUBRC = 0.
L_WERKS = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-EKGRP' .
CHECK SY-SUBRC = 0.
L_EKGRP = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-BSTYP' .
CHECK SY-SUBRC = 0.
L_BSTYP = IN_PAR-VALUE.
CLEAR Z08M1_ORG_TEXTS.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = L_BSTYP.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = SPACE.
ENDIF.
READ TABLE OUT_PAR WITH KEY 'COMPNAME'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COMP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SENDADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_ADRS.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'INVCADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_INVC.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COMPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_CPAD.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COVERLTR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COVR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SHIPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_SHIP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REMINDER'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RMDR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REJECTION'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RJCT.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'POSTADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_POST.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'LOGO'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_LOGO.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
reward points if useful
regards
Jaipal

How to add new fields in sap scripts using itcsy structure

hi guys,
could u provide the screen-shots for adding field in scripts. copied standard forms .
thanks& regards
eswar.

Hi,
you cannot add new fields using ITCSY. It is the interface structure between a SAPscript an a value-changing form-routine.
Need example anyway?
Good luck!
Jo

Add new field in standard transaction

Could ou please tell me that can we add material field in standard transaction VF04 selection criteria.
if yes then how?
regards,
Amar

hi Amar,
check this thread
Re: Additional Fields in Selection Screen of VF04 - Billing Due List
it might be helpful to you.
thanks
Sachin

How to add new fields for FB01 transaction both at Header and Line item

Hi Guys,
I would like to add the new fields at header and item level in FB01 transaction. Can I acheive this by using transaction EEWB....please help me on this.
Thanking you

Hi,
We are trying to copy a work flow objects from ECC6.0 to 4.6C...where we found the following Select statement.
*Determine Top WorkItem Instance
if im_top_wi_id is initial.
   select wi_id top_wi_id wi_rh_task into lw_top_id from sww_wi2obj
     up to 1 rows
     where wi_rh_task = im_wftask and
           catid      = 'BO'      and
           instid     = l_instid and
           typeid     = 'FIPP'.
   endselect.
   endif
As table sww_wi2obj can't be found in 4.6C, can any one help how to replace or implement the same logic as above statements.
Thank you....

Add new field in CMP9 transaction report output

Hi,
I want to add a new field in the CMP9 transaction report output. Is there any way ?
Thanks,
Fract

Hi,
BADI: CYMP_MODIFY_DISPLAY Change of Work Distribution to Personnel Resource Output

Enquiry about adding new field in SAP transaction vl10c

Hi,
requirement:
I want to add additonal field after executing SAP transaction vl10c.
help me
pooja

Hi,
You acn add extra fields with the help of a screen exit.
Try the following Exits:
V50R_USEREXITS
V50R_USEREXIT_PREPARE
V50R_USEREXIT_TRANSF
Related to the program RVV50R10C.
Regards,
Anji

Add new fields to VA01 Transaction

Hi,
I have to add two new column next to 'Quantity' under 'SALES' tab .( Item level ).
Customer is not accepting for adding those fields under the additional data screen.
Can anyone help me with a solution to do this. Thanks!

No Luck. Let me explain in detail.
First I will get the popup - ' You do not have authrizations to make the changes'. When I click the 'Help' on this window I get the following message. psl help.
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
Procedure
Comsult your system administrator.

Adding new custom fields in SAP transaction - PSOBWORK?

Hi,
System - ECC 6.0
I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
I highly appreciate your help on this.
Thanks.
Rajesh

Hi ,
There are options like screen-exits ,badis
the best option would be to find screen exits for the transaction and you code ur logic in the exit and create the screen with your requirement .

Adding new custom fields in SAP transaction?

Hi,
System - ECC 6.0
I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
I highly appreciate your help on this.
Thanks.
Rajesh

Hi,
Find the link below which has step by step process of adding custom fields:
goto site saptechnical-tutorials-ExitsBADIs-EEWB
Hope this would be helpfull.
Regards,
Sharath

Want to add new field in QA32/QA11 transaction under inspection lot stock

Dear Experts,
I want to add new field in QA32 transaction under inspection lot stock tab or under characteristic tab.
The reason behind is: Depends upon UD decision i want to assing customer name. So already we are having one Z Report for all the lots against this lot we have to display customer name.
So in order to fetch customer name in the Z report we want to assing customer through F4 selection in the usage decision screen.
I know this is possibe for Make to order scenario, but our senario is make to stock.
Please advice your valuable inputs.
Regards.

Hi Sujit,
Can you please elaborate it,coz i'm using the same but if i place the break-point in PBO of sub screen,the break-point won't be triggered.and is there any additional step to get the data from function group? if yes, please explain me indetail.
If possible please provide the sample code for this.
Thanks Inadvance.
Madan
Edited by: Madan.ngt on Mar 3, 2011 7:16 AM
Edited by: Madan.ngt on Mar 3, 2011 7:17 AM

Need to add new fields in transaction UDM_DISPUTE.

Hi Friends,
This is regarding UDM_DISPUTE transaction in FSCM.
I need to add new fields (drop down lists) in transaction UDM_DISPUTE.
Program Name: SAPLSRMCLFRM2
Screen Number: 100
Can any one please suggest me with the name of exit using which I can add these new fields.
Or another way through which I can add these new fields viz., BADI or classes.
Thank You in Advance!
Regards,
Tejaswini

Execute the below code to find the userexits the t-code is using
REPORT yuserexit_vin NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct. DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'PROG' AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'FUGR' AND obj_name EQ enlfdir-area.
      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab WHERE pgmid = 'R3TR' AND object = 'SMOD' AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ', 20(20) p_tcode, 45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline, 2 'Exit Name', 21 sy-vline , 22 'Description', 95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt WHERE sprsl = sy-langu AND name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline, 2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
* *---End of Program

Add new fields in SAP transaction IW22

Similar Messages

Maybe you are looking for