Add new fields to Coding Block using OXK3

Hi Friends
I need below clarification in addition of new fields to Coding block from transaction code- OXK3.
1) Which approach is adivsable either EXPERT MODE or BASIC MODE.
2) In Expert mode access key will be required to add field manually into BSEG table.
    In Basic mode approach do we need access key?
I found below statement from SAP HELP during BASIC MODE, correction number is TR number does repair number say as access key for table BSEG.
SAP HELP STATEMENT- In the production run, you are asked to enter a correction number and a repair number for table BSEG. Both specifications must be contained in the same transport request in order to import the enhancement correctly into the EDI subsystem.
Thanks & Regards
Lavanya

Can you advise how this was resolved?

Similar Messages

  • Add new fields to coding block-transaction code-OXK3

    Hi Friends
    I need below clarification in addition of new fields to Coding block from transaction code- OXK3.
    1) Which approach is adivsable either EXPERT MODE or BASIC MODE.
    2) In Expert mode access key will be required to add field manually into BSEG table.
    In Basic mode approach do we need access key?
    I found below statement from SAP HELP during BASIC MODE, correction number is TR number does repair number say as access key for table BSEG.
    SAP HELP STATEMENT- In the production run, you are asked to enter a correction number and a repair number for table BSEG. Both specifications must be contained in the same transport request in order to import the enhancement correctly into the EDI subsystem.
    Thanks & Regards
    Lavanya

    i got solution

  • How to add new fields in sap scripts using itcsy structure

    hi guys,
               could u provide the screen-shots for adding field in scripts. copied standard forms .
    thanks& regards
    eswar.

    Hi,
    you cannot add new fields using ITCSY. It is the interface structure between a SAPscript an a value-changing form-routine.
    Need example anyway?
    Good luck!
    Jo

  • Help!!! error after add new field use EEWB

    Hello,
    I add a new field through EEWB. The new field is add on Complaints header called Internal Reference.
    I use wizard of EEWB to add new field , business object: CRM business transaction, then in the wizard, I choose complaints as the type of the transaction, and I check the "search" box for the field, because I also need to use it as search criterial.
    Then I go into the BSP_WD_CMPWB, the new field is already available for component BT120H_CPL, view Details. And it is also available for the search view.
    So far, everything looks fine.
    But when I go into the UI for testing, when I perform the complaints search and click one record to go into the complaints view, it gives me a exception on header. I use SAAB to check the details, it like following:
    BTExtRefSet.BTEXTREF/MainWindow
    An exception has occurred Exception Class  CX_BSP_WD_INCORRECT_IMPLEMENT - Define Application Component 'BTExtRefSet'. 
    Method:  CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF 
    Source Text Row:  9
    Is there anything I missing to do so I get such error message???
    Edited by: SAP-Basis on Dec 1, 2008 5:12 PM

    Hi All,
    I have the same error but I am not usig EEWB.
    I am trying to display my custom set types as assignment blocks in the Web UI on 'objects' view. I able to see my set type as assignment block, but when I click on it, I have this error:
    ZXXX.PRDGENSET/SLSetOVE
    An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - Define Application Component 'ZXXX'.
    Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
    Source Text Row: 9
    ZXXX - set type name.
    I doubt my enhancement set is not getting loaded.
    Could you please let me know how do I solve this error.
    Thanks,
    Aditya.

  • Add new fields using BADI DNO_EVENT_SAVE in Solution Manager

    Hi,
    I would like to add new fields using BADI DNO_EVENT_SAVE. How can I add new fields? Thanks.

    Hi,
    This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
    Please check this thread:
    Reg : CRM_DNO_MONITOR
    Regards,
    Sanjai

  • Add new Fields to Opportunity ( TCODE : CRMD_BUS2000111 ) using EEWB

    Hi...
    I am trying to add new field to Opportunity, TCODE : CRMD_BUS2000111 ) using EEWB.
    I am using ...
    Business object BUSINESS_TRANSACTION,
    Extension type ADD_NEW_FIELDS
    Business Transaction Type : CRM Opportunity
    Assigned to : Customer Header data.
    I am able to generate project and extension successfully. But don't see any new field or custom tab added to transaction for Opportunity ( TCODE : CRMD_BUS2000111 ).
    WHEN I CHECKED BACK IN EEWB, DON'T SEE ANY SCREEN OBJECT IN OBJECT LIST.
    I can see Tables, Function group, Function Module, Data Element in object list but Screen object is missing. I believe that's the reason why new screen field not has been added. But not able to find out the reason for that.
    Your help will be highly appreciated. my e-mail id : [email protected]
    Thanks in advance.
    Minal

    Hi Minal,
    I would suggest to create a new extension with the following:
    Create new extension, but use the Enhancement type: "Extend Opportunity"
    When you create just two new fields with "ADD_NEW_FIELDS" you have to manually add them into the existing screens.
    Hope this helps
    Martin

  • How add new field in layout in RDF using XML report definition

    Hi, ALL
    Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

    hello,
    in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
    regards,
    the oracle reports team

  • Adding new fields to assignment block, what are the steps to do this.

    CRM 7.
    Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
    My understanding is that I need to use transaction EEWB and then somehow use the component  "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost.  I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
    I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
    I wondered if anyone has a link to any guide docuemnt about how to do this?.
    Any help would be very much appreciated.
    I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
    On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
    Jason

    Hi Jason,
    You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
    Best Regards,
    Gobinda

  • ADD new fields Who's WHo

    Im trying to add new fields to Advanced search in WHO's Who settings which are customs fields Z from infotype 1008; I customized new infoset copy from standard adding this infotype, but im getting error when i run de query on ESS, anyway Who's who don't Show fields from infotype 1008 on output field details, Anybody Knows How I can add custom fields in Who's who infoset and how the hell can I read infotype 1008 from infoset on  PCH DataBase?
    Thanks in advance

    Hi,
    Here is the catch, when you add the custom infotype make sure it has the primary key same as other infotypes used in the Query.
    For example make Pernr as the primary key in the custom infotype.
    I tried the same in our landscape and it worked fine.
    The steps I did are as below:
    In SQ02 - EDIT - Change Info-Type Selection - Add the Custom Infotype to the Query
    In SQ03 created a custom user group and assigned Infoset to the User Group.
    In SQ01 create the query and click on Change - From the top selected Basic List and added the fields which I want to see in list and also the selection criteria.
    Once done with this execute the Query and see if the data is populated from the Custom Infotype.
    There is no coding needed to populate the data.
    Make sure the join is right and it should get the data. And the above link shows how to include the Custom Info-type fields in WHO'S WHO search.
    Hope this helps.
    Cheers-
    Pramod

  • PLz Help me its urgent, how to add new field in mm01 basic data screen

    Hi everyone,
         plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
    Thanks,
    murali.

    Hi Murali,
    when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
    reward if useful.
    thanks
    abdulsamee.

  • Not able to add new fields in Content cube

    Hi all
    I think I had this post earlier too, but I haven't been able to add new fields in a Business content cube. I added them in the cube but I am not sure how to update the datasource, infosource, update rule etc. in proper manner.
    Please write me the details or send me in my email at
    [email protected] , I would be so happy for your help.
    Thank you in Advance.
    Sajita

    Roberto;
    I am doing the third options. feeding data from source system and I tried to add them into the infosource it didn't work. In this case, do you think I need to update the data sourece too, if so how do I do that it's function module. data source I am using is '0ME_ISM_AM_REV_1'. So please give me some more details. Thank you.
    Sajita

  • IDOC - add new field in in existing segment definition

    Hi,
    For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
    Thanks in advance.
    Rajeev

    Varma,
    I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
    Thanks
    Rajeev

  • I want to add new field to this list

    hi all,
    i want to add new field to this list.
    kostenstelle from table zfmkstel
    *& Report  ZFM_MOBLIST                                                 *
    REPORT  ZFM_MOBLIST.
    TABLES: zfm_handy , pa0002.
    TYPE-POOLS : slis.
    DATA: g_repid LIKE sy-repid,
          gs_print            TYPE slis_print_alv,
          gt_list_top_of_page TYPE slis_t_listheader,
          gt_list_end_of_page TYPE slis_t_listheader,
          gt_events           TYPE slis_t_event,
          gt_sort             TYPE slis_t_sortinfo_alv,
          gs_layout           TYPE slis_layout_alv,
          gt_fieldcat         TYPE slis_t_fieldcat_alv,
          fieldcat_ln LIKE LINE OF gt_fieldcat,
          col_pos TYPE i.
    *DATA : BEGIN OF it_moblist OCCURS 0.
           INCLUDE STRUCTURE zfm_handy.
    *DATA :  nachn  TYPE  pa0002-nachn,     
           vorna TYPE  pa0002-vorna,
         END OF it_moblist.
    DATA : BEGIN OF IT_MOBLIST OCCURS 0,
           TELNUM TYPE ZFM_HANDY-TELNUM,
           KARTNR TYPE ZFM_HANDY-KARTNR,
           ZUTART TYPE ZFM_HANDY-ZUTART,
           PERNR TYPE ZFM_HANDY-PERNR,
           nachn  TYPE pa0002-nachn,
           VORNA TYPE pa0002-vorna,
           ZDATE TYPE ZFM_HANDY-ZDATE,
           PINNR TYPE ZFM_HANDY-PINNR,
           PUKNR TYPE ZFM_HANDY-PUKNR,
           TARIF1 TYPE ZFM_HANDY-TARIF1,
           TARIF2 TYPE ZFM_HANDY-TARIF2,
           TARIF3 TYPE ZFM_HANDY-TARIF3,
           GTYPE TYPE ZFM_HANDY-GTYPE,
           IMEI TYPE ZFM_HANDY-TARIF1,
            twincard type zfm_handy-twincard,
            twinbill type zfm_handy-twinbill,
            einbau type zfm_handy-einbau,
            beschr type zfm_handy-beschr,
            text1 type zfm_handy-text1,
             text2 type zfm_handy-text2,
              text3 type zfm_handy-text3,
              end of it_moblist.
    DATA : BEGIN OF IT_zfm_handy OCCURS 0,
         TELNUM TYPE ZFM_HANDY-TELNUM,
         KARTNR TYPE ZFM_HANDY-KARTNR,
         ZUTART TYPE ZFM_HANDY-ZUTART,
         PERNR TYPE ZFM_HANDY-PERNR,
         ZDATE TYPE ZFM_HANDY-ZDATE,
         PINNR TYPE ZFM_HANDY-PINNR,
         PUKNR TYPE ZFM_HANDY-PUKNR,
         TARIF1 TYPE ZFM_HANDY-TARIF1,
         TARIF2 TYPE ZFM_HANDY-TARIF2,
         TARIF3 TYPE ZFM_HANDY-TARIF3,
         GTYPE TYPE ZFM_HANDY-GTYPE,
         IMEI TYPE ZFM_HANDY-TARIF1,
          twincard type zfm_handy-twincard,
          twinbill type zfm_handy-twinbill,
          einbau type zfm_handy-einbau,
          beschr type zfm_handy-beschr,
          text1 type zfm_handy-text1,
           text2 type zfm_handy-text2,
            text3 type zfm_handy-text3,
            end of it_zfm_handy.
    *DATA : BEGIN OF it_zfm_handy OCCURS 0.
           INCLUDE STRUCTURE zfm_handy.
    *DATA END OF it_zfm_handy.
    DATA : BEGIN OF it_pa0002 OCCURS 0,
            pernr TYPE pa0002-pernr,
            nachn   TYPE pa0002-nachn,     
           vorna     TYPE pa0002-vorna,
           pernr TYPE pa0002-pernr,
           END OF it_pa0002.
    INITIALIZATION.
      g_repid = sy-repid.
      PERFORM print_build USING gs_print.      "Print PARAMETERS
    START-OF-SELECTION.
      PERFORM data_selection.
      PERFORM build_fieldcat.
      PERFORM eventtab_build CHANGING gt_events.
      PERFORM comment_build  CHANGING gt_list_top_of_page.
      PERFORM call_alv.
    *&      Form  TOP_OF_PAGE
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = gt_list_top_of_page.
      WRITE: sy-datum, 'Page No', sy-pagno RIGHT-JUSTIFIED.
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  END_OF_PAGE
    FORM end_of_page.
      WRITE: /.
      WRITE AT (sy-linsz) sy-pagno CENTERED.
    ENDFORM.                    "END_OF_PAGE
    ### PRINT SETTINGS
    FORM print_build USING ls_print TYPE slis_print_alv.
      ls_print-print              = ' '. "PRINT IMMEDIATE
      ls_print-no_print_selinfos  = 'X'. "NO SELECTION INFO
      ls_print-no_coverpage       = ' '. "NO COVER PAGE
      ls_print-no_new_page        = ' '. "NO NEW PAGE
      ls_print-no_print_listinfos = 'X'. "NO PRINT LIST INFO
      ls_print-reserve_lines      = 2.   " FOOTERLINE
    ENDFORM.                    "PRINT_BUILD
    *&      Form  data_selection
          text
    -->  p1        text
    <--  p2        text
    FORM  data_selection .
      data : n(8) type n.
      SELECT * FROM
                 zfm_handy
           INTO CORRESPONDING FIELDS OF TABLE it_zfm_handy where pernr ne space.
      IF NOT it_zfm_handy[] IS INITIAL.
        loop at it_zfm_handy.
          n = it_zfm_handy-pernr.
          it_zfm_handy-pernr = n.
          modify it_zfm_handy.
        endloop.
        SELECT  pernr  nachn        
               vorna     
         FROM  pa0002
         INTO TABLE it_pa0002
         FOR ALL ENTRIES IN it_zfm_handy
         WHERE pernr = it_zfm_handy-pernr and endda = '99991231'.
       SELECT  pernr  nachn        
              vorna     
        FROM  pa0002
        INTO TABLE it_pa0002
        FOR ALL ENTRIES IN it_zfm_handy
        WHERE pernr = it_zfm_handy-pernr and begda le sy-datum and endda ge sy-datum.
      ENDIF.                              " not it_zfm_handy
      LOOP AT it_zfm_handy.
        MOVE-CORRESPONDING  it_zfm_handy TO it_moblist.
        clear it_pa0002.
        READ TABLE it_pa0002  WITH KEY pernr = it_zfm_handy-pernr.
        if sy-subrc = 0.
          move it_pa0002-nachn to it_moblist-nachn.
          move it_pa0002-vorna to it_moblist-vorna.
          move it_pa0002-pernr to it_moblist-pernr.
        ENDIF.
        APPEND  it_moblist.
        CLEAR   it_moblist.
    *endif.
      ENDLOOP.
    ENDFORM.                    " data_selection
    *&      Form  BUILD
          text
    -->  p1        text
    <--  p2        text
    FORM build_fieldcat .
    Explain Field Description to ALV
      DATA: fieldcat_in TYPE slis_fieldcat_alv.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname = 'TELNUM'.
      fieldcat_ln-tabname   = 'IT_MOBLIST'.
      fieldcat_ln-no_out    = ' '.
      fieldcat_ln-seltext_l = 'TELNUM'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname = 'KARTNR'.
      fieldcat_ln-tabname   = 'IT_MOBLIST'.
      fieldcat_ln-no_out    = ' '.
      fieldcat_ln-seltext_l = 'KARTNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname = 'ZUTART'.
      fieldcat_ln-tabname   = 'IT_MOBLIST'.
      fieldcat_ln-no_out    = ' '.
      fieldcat_ln-seltext_l = 'ZUTART'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'PERNR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'PERNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'NACHN'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l =  'NACHN'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'VORNA'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'VORNA'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'ZDATE'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'ZDATE'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'PINNR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'PINNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'PUKNR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'PUKNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TARIF1'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TARIF1'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TARIF2'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TARIF2'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TARIF3'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TARIF3'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'GTYPE'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'GTYPE'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'IMEI'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'IMEI'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TWINCARD'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TWINCARD'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TWINBILL'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TWINBILL'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'EINBAU'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'EINBAU'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'BESCHR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'BESCHR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TEXT1'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TEXT1'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TEXT2'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TEXT2'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TEXT3'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TEXT3'.
      APPEND fieldcat_ln TO gt_fieldcat.
    DATA SORTING
      DATA: gs_sort TYPE slis_sortinfo_alv.
      CLEAR gs_sort.
      gs_sort-fieldname = 'TELNUM'.
      gs_sort-spos      = 1.
      gs_sort-up        = 'X'.
    GS_SORT-SUBTOT    = 'X'.
      APPEND gs_sort TO gt_sort.
    CLEAR GS_SORT.
    GS_SORT-FIELDNAME = 'KARTNR'.
    GS_SORT-SPOS      = 2.
    GS_SORT-UP        = 'X'.
    *GS_SORT-SUBTOT    = 'X'.
      APPEND gs_sort TO gt_sort.
    ENDFORM.                    " BUILD
    *&      Form  EVENTTAB_BUILD
          text
         <--P_GT_EVENTS  text
    FORM eventtab_build  CHANGING lt_events TYPE slis_t_event.
      CONSTANTS:
    gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
    gc_formname_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
      DATA: ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type = 0
        IMPORTING
          et_events   = lt_events.
      READ TABLE lt_events WITH KEY name =  slis_ev_top_of_page
                               INTO ls_event.
      IF sy-subrc = 0.
        MOVE gc_formname_top_of_page TO ls_event-form.
        APPEND ls_event TO lt_events.
      ENDIF.
    define END_OF_PAGE event
      READ TABLE lt_events WITH KEY name =  slis_ev_end_of_page
                               INTO ls_event.
      IF sy-subrc = 0.
        MOVE gc_formname_end_of_page TO ls_event-form.
        APPEND ls_event TO lt_events.
      ENDIF.
    ENDFORM.                    " EVENTTAB_BUILD
    *&      Form  COMMENT_BUILD
          text
         <--P_GT_LIST_TOP_OF_PAGE  text
    FORM comment_build  CHANGING gt_top_of_page TYPE slis_t_listheader.
      DATA: gs_line TYPE slis_listheader.
      DATA: today_date(10) TYPE c.
      CONCATENATE
      sy-datum+6(2) '.'
      sy-datum+4(2) '.'
      sy-datum(4) INTO today_date.
      CLEAR gs_line.
      gs_line-typ  = 'H'.
      gs_line-info = 'MOBLIST DETAILS'.
      APPEND gs_line TO gt_top_of_page.
      CLEAR gs_line.
      gs_line-typ  = 'S'.
      gs_line-key  = 'Date:'.
      gs_line-info = today_date.
      APPEND gs_line TO gt_top_of_page.
    GS_LINE-KEY  = 'User:'.
    GS_LINE-INFO = sy-uname.
      APPEND gs_line TO gt_top_of_page.
      CLEAR gs_line.
      gs_line-typ  = 'A'.
      gs_line-info = 'ACTION'.
      APPEND gs_line TO  gt_top_of_page.
    ENDFORM.                    " COMMENT_BUILD
    *&      Form  CALL_ALV
          text
    -->  p1        text
    <--  p2        text
    FORM call_alv .
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
       i_callback_program = g_repid
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = ' '
       is_layout =  gs_layout
       it_fieldcat = gt_fieldcat
         it_sort = gt_sort
         it_events = gt_events
         is_print = gs_print
       TABLES
         t_outtab = IT_MOBLIST
       EXCEPTIONS
         program_error = 1
       OTHERS = 2.
    ENDFORM.                    "CALL_ALV.

    Hi,
    add:
    1) to IT_MOBLIST
    text3 type zfm_handy-text3,
    kostl type csks-kostl,
    end of it_moblist.
    2)...
    CLEAR fieldcat_in.
    fieldcat_ln-fieldname = 'KOSTL'.
    fieldcat_ln-tabname = 'IT_MOBLIST'.
    fieldcat_ln-no_out = ' '.
    fieldcat_ln-seltext_l = 'KOSTL'.
    APPEND fieldcat_ln TO gt_fieldcat.

  • How to add New field in SMART forms.

    How to add new field in the SMART FORMS. Please know me the step.
    Please help me soon.
    Moderator message: Welcome to SCN!
    Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

    How to add new field in the SMART FORMS. Please know me the step.
    Please help me soon.
    Moderator message: Welcome to SCN!
    Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

  • Need to add extra fields in Custom tab  using EEWB.

    hi ,
    I extended business partner with 10 custom fields using EEWB by creating an custom tab. I would like to add 2 more fields in the same custom tab . I am unable to find the provision to add new field to the existing project. so i am deleting the existing project and creating new project and adding all the =and new fields.
    Now when I am creating new project  i am loosing the old field names. It creating the new fields with new field names.
    My requirement is I should create a new fields without changing the old field names.
    So Please can any one help me as how to approach these without deletion or changing the existing field names.
    Finally my custom tab should contain 12 fields.
    Thanks
    viswa

    Hi viswa,
    I have a requirement to add 2 new fields to the Standard Transaction (called <b>BP</b> ).
    I have gone through various concepts like <b>EEWB and BDT</b> tools. But, still I am not able to get the things well.
    So please provide me with the procedure to explore things and work on the requirement.
    Thanks in advance.
    Regards,
    Vishnu.

Maybe you are looking for

  • How to handle the extended vo in the extended controller

    Hi, I want to know how to handle the extended vo attributes in the extended controller. I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2. Here i want to pass value according based on some cond

  • Problem with JDBC resultset

    Hello everyone: I'm using JDBC to connect to SQL Server, normally after executeQuery();, it should return me a opened BaseResultSet in order that i can read datas by stream(next(), getColumn(),etc...) but sometimes it returns a BaseResultSet closed.

  • I lost my cd and i now need to install my hp printer. How do i go about it?

    I have been having problem with the installation of my printer. Kindly assist, please.

  • Table Control Scrolling issue in Module Pool

    Hi, I've done table control. From Selection screen i've 3 buttons, if we'll press on one button one table control is visible. There if i do scrolling up to 10 records and i come back to selection and press another button again in table control scroll

  • Can't Open file--and then ALL backups also will not open. SEVERE BUG

    After losing 2 FULL day's work to files that inexplicably and suddenly would not open, I read discussion board questions and rebuilt the entire presentations from Keynote, instead of starting with PowerPoint imports. However the same thing happened.