Add new Fields to Opportunity ( TCODE : CRMD_BUS2000111 ) using EEWB

Hi...
I am trying to add new field to Opportunity, TCODE : CRMD_BUS2000111 ) using EEWB.
I am using ...
Business object BUSINESS_TRANSACTION,
Extension type ADD_NEW_FIELDS
Business Transaction Type : CRM Opportunity
Assigned to : Customer Header data.
I am able to generate project and extension successfully. But don't see any new field or custom tab added to transaction for Opportunity ( TCODE : CRMD_BUS2000111 ).
WHEN I CHECKED BACK IN EEWB, DON'T SEE ANY SCREEN OBJECT IN OBJECT LIST.
I can see Tables, Function group, Function Module, Data Element in object list but Screen object is missing. I believe that's the reason why new screen field not has been added. But not able to find out the reason for that.
Your help will be highly appreciated. my e-mail id : [email protected]
Thanks in advance.
Minal

Hi Minal,
I would suggest to create a new extension with the following:
Create new extension, but use the Enhancement type: "Extend Opportunity"
When you create just two new fields with "ADD_NEW_FIELDS" you have to manually add them into the existing screens.
Hope this helps
Martin

Similar Messages

  • How add new field in layout in RDF using XML report definition

    Hi, ALL
    Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

    hello,
    in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
    regards,
    the oracle reports team

  • Requirment to add new field in kna1 and maintiane using XD02

    hi
    i have a requirment need suggestion on that
    1) the requirmen is to add a new field email id on kna1 standard table
    ( it can be done by append structure pls give me full steps to do it and complication involved in it)
    2) now is it possible that user able to maintiane this new field by using Tcode XD02
    will it be visible there if we use a new zappend structure and how the data will be populate in that field by Xd02 do any change required in Xd02
    3) we have to create another tcode for display of these threee fields kunnr name1 and email id that will be done by moudle pool again so is there any compication in thati method later is above steps are done
    main th ing is how data will be populated in kna1 using xd02
    regards
    ARora

    hi Seshu
    my main problem in this is that
    since we are using append structure how data wil be populated in the kna1 table in this new field email id?
    as we need to find some user exists to do so as it is a structre not a field so population of data is a problem in that?
    2) and wheter i should new ztable but customer is asking to add in the standard table and maintian by some xtransaction whetehr it is possible or not?
    #) also can us suggeest on the primary keys i should give for t his data types and records as pasted below if i create a new table and should i check init check box also?
    kunnr        email id                                       name1
    100400     [email protected]      TECHNOLOGY HONG KONG LTD
    100400     [email protected]      TECHNOLOGY HONG KONG LTD
    100400     [email protected]     TECHNOLOGY HONG KONG LTD
    100400     [email protected]               TECHNOLOGY HONG KONG LTD
    100550     [email protected]      INDUSTRIAL CO. LTD.
    100550     [email protected]      INDUSTRIAL CO. LTD.
    100550     [email protected]                      INDUSTRIAL CO. LTD.
    100550     [email protected]                      INDUSTRIAL CO. LTD.
    100550     [email protected]      INDUSTRIAL CO. LTD.
    100550     [email protected]                       INDUSTRIAL CO. LTD.
    regards
    Arora

  • How to add new fields in sap scripts using itcsy structure

    hi guys,
               could u provide the screen-shots for adding field in scripts. copied standard forms .
    thanks& regards
    eswar.

    Hi,
    you cannot add new fields using ITCSY. It is the interface structure between a SAPscript an a value-changing form-routine.
    Need example anyway?
    Good luck!
    Jo

  • Add new fields using BADI DNO_EVENT_SAVE in Solution Manager

    Hi,
    I would like to add new fields using BADI DNO_EVENT_SAVE. How can I add new fields? Thanks.

    Hi,
    This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
    Please check this thread:
    Reg : CRM_DNO_MONITOR
    Regards,
    Sanjai

  • Help!!! error after add new field use EEWB

    Hello,
    I add a new field through EEWB. The new field is add on Complaints header called Internal Reference.
    I use wizard of EEWB to add new field , business object: CRM business transaction, then in the wizard, I choose complaints as the type of the transaction, and I check the "search" box for the field, because I also need to use it as search criterial.
    Then I go into the BSP_WD_CMPWB, the new field is already available for component BT120H_CPL, view Details. And it is also available for the search view.
    So far, everything looks fine.
    But when I go into the UI for testing, when I perform the complaints search and click one record to go into the complaints view, it gives me a exception on header. I use SAAB to check the details, it like following:
    BTExtRefSet.BTEXTREF/MainWindow
    An exception has occurred Exception Class  CX_BSP_WD_INCORRECT_IMPLEMENT - Define Application Component 'BTExtRefSet'. 
    Method:  CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF 
    Source Text Row:  9
    Is there anything I missing to do so I get such error message???
    Edited by: SAP-Basis on Dec 1, 2008 5:12 PM

    Hi All,
    I have the same error but I am not usig EEWB.
    I am trying to display my custom set types as assignment blocks in the Web UI on 'objects' view. I able to see my set type as assignment block, but when I click on it, I have this error:
    ZXXX.PRDGENSET/SLSetOVE
    An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - Define Application Component 'ZXXX'.
    Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
    Source Text Row: 9
    ZXXX - set type name.
    I doubt my enhancement set is not getting loaded.
    Could you please let me know how do I solve this error.
    Thanks,
    Aditya.

  • CRM  IC Winclient - How to add new fields in the BP Search of TRX CIC0

    Hello Experts,
    I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
    Can you help me?
    Thanks in advance.
    Caíque Escaler

    Hi
    make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
    in spro in Define customer-specific search control -> mark fields with X.
    and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
    you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
    Regards
    Radek

  • Add new fields in CRM_DNO_MONITOR

    Hi,
    I have a requirement to add new fields to screen of transaction_code CRM_DNO_MONITOR. I found out the badi name "CRM_DNO_MONITOR" which uses interface "IF_CX_CRM_DNO_MONITOR" implemented in class "CL_EX_CRM_DNO_MONITOR".
    I tried to debug tcode CRM_DNO_MONITOR to check for which action the methods in the BADI is called, it looks like it is not calling at all and generates the screen.
    Please suggest how to add more fields in the screen using this BADI or any other way to add new fields.
    Thanks
    Prasad

    Hi,
    This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
    Please check this thread:
    Reg : CRM_DNO_MONITOR
    Regards,
    Sanjai

  • How to add new field at standard report,?

    Hi expert,
    How do i find an easy way to add new field using this tcode  s_alr_87012332 ?

    Hi,
    In order to add a custom fields , please chech the enhancement MM06E005.
    Here, you can get includes in which you can place ur field.
    Hope this helps.

  • Need to add new fields in transaction UDM_DISPUTE.

    Hi Friends,
    This is regarding UDM_DISPUTE transaction in FSCM.
    I need to add new fields (drop down lists) in transaction UDM_DISPUTE.
    Program Name: SAPLSRMCLFRM2
    Screen Number: 100
    Can any one please suggest me with the name of exit using which I can add these new fields.
    Or another way through which I can add these new fields viz., BADI or classes.
    Thank You in Advance!
    Regards,
    Tejaswini

    Execute the below code to find the userexits the t-code is using
    REPORT yuserexit_vin NO STANDARD PAGE HEADING.
    TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    TABLES : tstct. DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'PROG' AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'FUGR' AND obj_name EQ enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
      SELECT * FROM tadir INTO TABLE jtab WHERE pgmid = 'R3TR' AND object = 'SMOD' AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ', 20(20) p_tcode, 45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline, 2 'Exit Name', 21 sy-vline , 22 'Description', 95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt WHERE sprsl = sy-langu AND name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline, 2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    * *---End of Program

  • PLz Help me its urgent, how to add new field in mm01 basic data screen

    Hi everyone,
         plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
    Thanks,
    murali.

    Hi Murali,
    when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
    reward if useful.
    thanks
    abdulsamee.

  • Not able to add new fields in Content cube

    Hi all
    I think I had this post earlier too, but I haven't been able to add new fields in a Business content cube. I added them in the cube but I am not sure how to update the datasource, infosource, update rule etc. in proper manner.
    Please write me the details or send me in my email at
    [email protected] , I would be so happy for your help.
    Thank you in Advance.
    Sajita

    Roberto;
    I am doing the third options. feeding data from source system and I tried to add them into the infosource it didn't work. In this case, do you think I need to update the data sourece too, if so how do I do that it's function module. data source I am using is '0ME_ISM_AM_REV_1'. So please give me some more details. Thank you.
    Sajita

  • IDOC - add new field in in existing segment definition

    Hi,
    For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
    Thanks in advance.
    Rajeev

    Varma,
    I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
    Thanks
    Rajeev

  • I want to add new field to this list

    hi all,
    i want to add new field to this list.
    kostenstelle from table zfmkstel
    *& Report  ZFM_MOBLIST                                                 *
    REPORT  ZFM_MOBLIST.
    TABLES: zfm_handy , pa0002.
    TYPE-POOLS : slis.
    DATA: g_repid LIKE sy-repid,
          gs_print            TYPE slis_print_alv,
          gt_list_top_of_page TYPE slis_t_listheader,
          gt_list_end_of_page TYPE slis_t_listheader,
          gt_events           TYPE slis_t_event,
          gt_sort             TYPE slis_t_sortinfo_alv,
          gs_layout           TYPE slis_layout_alv,
          gt_fieldcat         TYPE slis_t_fieldcat_alv,
          fieldcat_ln LIKE LINE OF gt_fieldcat,
          col_pos TYPE i.
    *DATA : BEGIN OF it_moblist OCCURS 0.
           INCLUDE STRUCTURE zfm_handy.
    *DATA :  nachn  TYPE  pa0002-nachn,     
           vorna TYPE  pa0002-vorna,
         END OF it_moblist.
    DATA : BEGIN OF IT_MOBLIST OCCURS 0,
           TELNUM TYPE ZFM_HANDY-TELNUM,
           KARTNR TYPE ZFM_HANDY-KARTNR,
           ZUTART TYPE ZFM_HANDY-ZUTART,
           PERNR TYPE ZFM_HANDY-PERNR,
           nachn  TYPE pa0002-nachn,
           VORNA TYPE pa0002-vorna,
           ZDATE TYPE ZFM_HANDY-ZDATE,
           PINNR TYPE ZFM_HANDY-PINNR,
           PUKNR TYPE ZFM_HANDY-PUKNR,
           TARIF1 TYPE ZFM_HANDY-TARIF1,
           TARIF2 TYPE ZFM_HANDY-TARIF2,
           TARIF3 TYPE ZFM_HANDY-TARIF3,
           GTYPE TYPE ZFM_HANDY-GTYPE,
           IMEI TYPE ZFM_HANDY-TARIF1,
            twincard type zfm_handy-twincard,
            twinbill type zfm_handy-twinbill,
            einbau type zfm_handy-einbau,
            beschr type zfm_handy-beschr,
            text1 type zfm_handy-text1,
             text2 type zfm_handy-text2,
              text3 type zfm_handy-text3,
              end of it_moblist.
    DATA : BEGIN OF IT_zfm_handy OCCURS 0,
         TELNUM TYPE ZFM_HANDY-TELNUM,
         KARTNR TYPE ZFM_HANDY-KARTNR,
         ZUTART TYPE ZFM_HANDY-ZUTART,
         PERNR TYPE ZFM_HANDY-PERNR,
         ZDATE TYPE ZFM_HANDY-ZDATE,
         PINNR TYPE ZFM_HANDY-PINNR,
         PUKNR TYPE ZFM_HANDY-PUKNR,
         TARIF1 TYPE ZFM_HANDY-TARIF1,
         TARIF2 TYPE ZFM_HANDY-TARIF2,
         TARIF3 TYPE ZFM_HANDY-TARIF3,
         GTYPE TYPE ZFM_HANDY-GTYPE,
         IMEI TYPE ZFM_HANDY-TARIF1,
          twincard type zfm_handy-twincard,
          twinbill type zfm_handy-twinbill,
          einbau type zfm_handy-einbau,
          beschr type zfm_handy-beschr,
          text1 type zfm_handy-text1,
           text2 type zfm_handy-text2,
            text3 type zfm_handy-text3,
            end of it_zfm_handy.
    *DATA : BEGIN OF it_zfm_handy OCCURS 0.
           INCLUDE STRUCTURE zfm_handy.
    *DATA END OF it_zfm_handy.
    DATA : BEGIN OF it_pa0002 OCCURS 0,
            pernr TYPE pa0002-pernr,
            nachn   TYPE pa0002-nachn,     
           vorna     TYPE pa0002-vorna,
           pernr TYPE pa0002-pernr,
           END OF it_pa0002.
    INITIALIZATION.
      g_repid = sy-repid.
      PERFORM print_build USING gs_print.      "Print PARAMETERS
    START-OF-SELECTION.
      PERFORM data_selection.
      PERFORM build_fieldcat.
      PERFORM eventtab_build CHANGING gt_events.
      PERFORM comment_build  CHANGING gt_list_top_of_page.
      PERFORM call_alv.
    *&      Form  TOP_OF_PAGE
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = gt_list_top_of_page.
      WRITE: sy-datum, 'Page No', sy-pagno RIGHT-JUSTIFIED.
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  END_OF_PAGE
    FORM end_of_page.
      WRITE: /.
      WRITE AT (sy-linsz) sy-pagno CENTERED.
    ENDFORM.                    "END_OF_PAGE
    ### PRINT SETTINGS
    FORM print_build USING ls_print TYPE slis_print_alv.
      ls_print-print              = ' '. "PRINT IMMEDIATE
      ls_print-no_print_selinfos  = 'X'. "NO SELECTION INFO
      ls_print-no_coverpage       = ' '. "NO COVER PAGE
      ls_print-no_new_page        = ' '. "NO NEW PAGE
      ls_print-no_print_listinfos = 'X'. "NO PRINT LIST INFO
      ls_print-reserve_lines      = 2.   " FOOTERLINE
    ENDFORM.                    "PRINT_BUILD
    *&      Form  data_selection
          text
    -->  p1        text
    <--  p2        text
    FORM  data_selection .
      data : n(8) type n.
      SELECT * FROM
                 zfm_handy
           INTO CORRESPONDING FIELDS OF TABLE it_zfm_handy where pernr ne space.
      IF NOT it_zfm_handy[] IS INITIAL.
        loop at it_zfm_handy.
          n = it_zfm_handy-pernr.
          it_zfm_handy-pernr = n.
          modify it_zfm_handy.
        endloop.
        SELECT  pernr  nachn        
               vorna     
         FROM  pa0002
         INTO TABLE it_pa0002
         FOR ALL ENTRIES IN it_zfm_handy
         WHERE pernr = it_zfm_handy-pernr and endda = '99991231'.
       SELECT  pernr  nachn        
              vorna     
        FROM  pa0002
        INTO TABLE it_pa0002
        FOR ALL ENTRIES IN it_zfm_handy
        WHERE pernr = it_zfm_handy-pernr and begda le sy-datum and endda ge sy-datum.
      ENDIF.                              " not it_zfm_handy
      LOOP AT it_zfm_handy.
        MOVE-CORRESPONDING  it_zfm_handy TO it_moblist.
        clear it_pa0002.
        READ TABLE it_pa0002  WITH KEY pernr = it_zfm_handy-pernr.
        if sy-subrc = 0.
          move it_pa0002-nachn to it_moblist-nachn.
          move it_pa0002-vorna to it_moblist-vorna.
          move it_pa0002-pernr to it_moblist-pernr.
        ENDIF.
        APPEND  it_moblist.
        CLEAR   it_moblist.
    *endif.
      ENDLOOP.
    ENDFORM.                    " data_selection
    *&      Form  BUILD
          text
    -->  p1        text
    <--  p2        text
    FORM build_fieldcat .
    Explain Field Description to ALV
      DATA: fieldcat_in TYPE slis_fieldcat_alv.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname = 'TELNUM'.
      fieldcat_ln-tabname   = 'IT_MOBLIST'.
      fieldcat_ln-no_out    = ' '.
      fieldcat_ln-seltext_l = 'TELNUM'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname = 'KARTNR'.
      fieldcat_ln-tabname   = 'IT_MOBLIST'.
      fieldcat_ln-no_out    = ' '.
      fieldcat_ln-seltext_l = 'KARTNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname = 'ZUTART'.
      fieldcat_ln-tabname   = 'IT_MOBLIST'.
      fieldcat_ln-no_out    = ' '.
      fieldcat_ln-seltext_l = 'ZUTART'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'PERNR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'PERNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'NACHN'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l =  'NACHN'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'VORNA'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'VORNA'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'ZDATE'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'ZDATE'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'PINNR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'PINNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'PUKNR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'PUKNR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TARIF1'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TARIF1'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TARIF2'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TARIF2'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TARIF3'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TARIF3'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'GTYPE'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'GTYPE'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'IMEI'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'IMEI'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TWINCARD'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TWINCARD'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TWINBILL'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TWINBILL'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'EINBAU'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'EINBAU'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'BESCHR'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'BESCHR'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TEXT1'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TEXT1'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TEXT2'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TEXT2'.
      APPEND fieldcat_ln TO gt_fieldcat.
      CLEAR fieldcat_in.
      fieldcat_ln-fieldname     = 'TEXT3'.
      fieldcat_ln-tabname       = 'IT_MOBLIST'.
      fieldcat_ln-no_out        = ' '.
      fieldcat_ln-seltext_l = 'TEXT3'.
      APPEND fieldcat_ln TO gt_fieldcat.
    DATA SORTING
      DATA: gs_sort TYPE slis_sortinfo_alv.
      CLEAR gs_sort.
      gs_sort-fieldname = 'TELNUM'.
      gs_sort-spos      = 1.
      gs_sort-up        = 'X'.
    GS_SORT-SUBTOT    = 'X'.
      APPEND gs_sort TO gt_sort.
    CLEAR GS_SORT.
    GS_SORT-FIELDNAME = 'KARTNR'.
    GS_SORT-SPOS      = 2.
    GS_SORT-UP        = 'X'.
    *GS_SORT-SUBTOT    = 'X'.
      APPEND gs_sort TO gt_sort.
    ENDFORM.                    " BUILD
    *&      Form  EVENTTAB_BUILD
          text
         <--P_GT_EVENTS  text
    FORM eventtab_build  CHANGING lt_events TYPE slis_t_event.
      CONSTANTS:
    gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
    gc_formname_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
      DATA: ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type = 0
        IMPORTING
          et_events   = lt_events.
      READ TABLE lt_events WITH KEY name =  slis_ev_top_of_page
                               INTO ls_event.
      IF sy-subrc = 0.
        MOVE gc_formname_top_of_page TO ls_event-form.
        APPEND ls_event TO lt_events.
      ENDIF.
    define END_OF_PAGE event
      READ TABLE lt_events WITH KEY name =  slis_ev_end_of_page
                               INTO ls_event.
      IF sy-subrc = 0.
        MOVE gc_formname_end_of_page TO ls_event-form.
        APPEND ls_event TO lt_events.
      ENDIF.
    ENDFORM.                    " EVENTTAB_BUILD
    *&      Form  COMMENT_BUILD
          text
         <--P_GT_LIST_TOP_OF_PAGE  text
    FORM comment_build  CHANGING gt_top_of_page TYPE slis_t_listheader.
      DATA: gs_line TYPE slis_listheader.
      DATA: today_date(10) TYPE c.
      CONCATENATE
      sy-datum+6(2) '.'
      sy-datum+4(2) '.'
      sy-datum(4) INTO today_date.
      CLEAR gs_line.
      gs_line-typ  = 'H'.
      gs_line-info = 'MOBLIST DETAILS'.
      APPEND gs_line TO gt_top_of_page.
      CLEAR gs_line.
      gs_line-typ  = 'S'.
      gs_line-key  = 'Date:'.
      gs_line-info = today_date.
      APPEND gs_line TO gt_top_of_page.
    GS_LINE-KEY  = 'User:'.
    GS_LINE-INFO = sy-uname.
      APPEND gs_line TO gt_top_of_page.
      CLEAR gs_line.
      gs_line-typ  = 'A'.
      gs_line-info = 'ACTION'.
      APPEND gs_line TO  gt_top_of_page.
    ENDFORM.                    " COMMENT_BUILD
    *&      Form  CALL_ALV
          text
    -->  p1        text
    <--  p2        text
    FORM call_alv .
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
       i_callback_program = g_repid
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = ' '
       is_layout =  gs_layout
       it_fieldcat = gt_fieldcat
         it_sort = gt_sort
         it_events = gt_events
         is_print = gs_print
       TABLES
         t_outtab = IT_MOBLIST
       EXCEPTIONS
         program_error = 1
       OTHERS = 2.
    ENDFORM.                    "CALL_ALV.

    Hi,
    add:
    1) to IT_MOBLIST
    text3 type zfm_handy-text3,
    kostl type csks-kostl,
    end of it_moblist.
    2)...
    CLEAR fieldcat_in.
    fieldcat_ln-fieldname = 'KOSTL'.
    fieldcat_ln-tabname = 'IT_MOBLIST'.
    fieldcat_ln-no_out = ' '.
    fieldcat_ln-seltext_l = 'KOSTL'.
    APPEND fieldcat_ln TO gt_fieldcat.

  • How to add New field in SMART forms.

    How to add new field in the SMART FORMS. Please know me the step.
    Please help me soon.
    Moderator message: Welcome to SCN!
    Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

    How to add new field in the SMART FORMS. Please know me the step.
    Please help me soon.
    Moderator message: Welcome to SCN!
    Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

Maybe you are looking for

  • Photoshop CS4 won't open Crashes immediately. Out of ideas

    CS4, Windows 8.1 My graphics drivers are up to date. I've not installed any third party items for PS. I've uninstalled, used clean script, reinstalled several times. ran the repair license (multiple times), changed flexnet licensing from manual to au

  • Please suggest a correction in the code: Urgent

    I am capturing the Material Document No., Material No., Material Description, Quantity etc. into a main_table in my code so as to write/print labels containing GRN details (movement type '105') using se38. These labels are to be pasted on the materia

  • On the fly modification of an updated file

    Good Day, I have a SharePoint library which keeps word documents (docx) in document sets. These word documents can be co-authored which means that more than one user can use Word application and work with the file at the same time. Each time user sav

  • Embedded OC4J  - Web Service works... not OC4J!

    I have a very interesting issue here.. when I run my EJB 3.0 - Web service in Jdeveloper using the embedded OC4J, I am able to successfully test my services. But, When I deploy the Web service to an OC4J server, I get the folowing error when I try to

  • Plant specific status customization (MARC-MMSTA)

    Hi all, I want to be able to prevent creation of process order for a material (A) , whose BOM has a CO-blocked or Production-blocked material (B). I tried OMS4 transaction, from there i set it B, (error message) for CO-blockage and production-blockag