Add new fields to selection screen for standard billing dule list in CRM

Hi ,
I have one issue with standard  program ,tcode is /BEA/IPMI01.
SUB: Adding  few new fields like IP  to selection screen AND few fields to output list.
As this is a standard program (tcode: /bea/ipmi01) , i searched for BADI,EXITS but couldn't .
Can any one help me how to handle this with out cloning the standard one.
I got some information but succeed.
in SPRO.
/CRM/BILLING/SYSTEM ENHANCMENTS/access billing  engine navigator. you will find selection design in the path
/CRMB/OBJECT/DL/REPORT/SELECTION GROPS/DLA/SELECTION FEIDLS.
we can find selecton at this place but i couldnot find how to add new fieds.
Note: i found whatever we do ,  it willl reflect once we regenerated the program.

Hi,
You may be able to create an append structure to the standard output structure/table. Go to SE11, open the structure and click on append structure.
Regards
Prasenjit

Similar Messages

  • How can I add a new field in selection screen for this report

    *& Report  ZGS_BARKODLA_HIZLI_GIRIS
    report  zgs_barkodla_hizli_giris.
    tables: mara,
            mseg,
            mch1,
            *mch1,
            mkpf,
            mchb ,
            makt.
    type-pools: esp1.
    data: i_message_tab  type esp1_message_tab_type,
          wa_message_tab type esp1_message_wa_type ,
          sc_count type i.
    ALV
    type-pools: slis, kkblo.
    data: gs_layout   type slis_layout_alv                     ,
          gt_fldcat   type slis_t_fieldcat_alv with header line,
          gt_header   type slis_t_listheader   with header line,
          gt_sortin   type slis_t_sortinfo_alv with header line,
          g_repid     like sy-repid                            .
    define add-fieldcat.
      gt_fldcat-fieldname     = &1.
      gt_fldcat-ref_tabname   = &2.
      gt_fldcat-seltext_s     = &3.
      gt_fldcat-seltext_m     = &3.
      gt_fldcat-seltext_l     = &3.
      gt_fldcat-reptext_ddic  = &3.
      gt_fldcat-ddictxt       = 'M'.
      append gt_fldcat.
      clear  gt_fldcat.
    end-of-definition.
    types: begin of titab,
            sel   type xfeld,
            matnr type matnr,
            maktx type maktx,
            charg type charg_d,
            menge type menge_d,
            erfmg type erfmg,
           end of titab.
    data : witab type titab.
    data : itab type table of titab.
    data : ok_code type sy-ucomm.
    controls: tc_itab type tableview using screen 0100.
    data: gv_header like bapi2017_gm_head_01,
          gv_code   like bapi2017_gm_code.
    BAPI export parameters
    data: gv_headret type bapi2017_gm_head_ret,
          gv_matdoc  type bapi2017_gm_head_ret-mat_doc,
          gv_matyear type bapi2017_gm_head_ret-doc_year.
    data : lv_objek like inob-objek .
    data : ls_inob  like inob .
    data : imseg type ty_t_mseg.
    data : wmseg type mseg.
    data : answer.
    data : count type i.
    data : v_atinn type atinn.
    BAPI movement details
    data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
          with header line.
    data: i_return type bapiret2 occurs 0 with header line.
    start-of-selection.
    call function 'CONVERSION_EXIT_ATINN_INPUT'
       exporting
         input  = 'Z_ORAN'
       importing
         output = v_atinn.
      call screen 100.
    *&      Module  status_0100  OUTPUT
    module status_0100 output.
      set pf-status '100'.
      set titlebar '100'.
      mseg-werks = 1000.
      mseg-umwrk = 1000.
    **added
      sc_count = sc_count + 1.
      if sc_count eq 1.
        mseg-bwart = 313.
      endif.
      mkpf-budat = sy-datum.
    **added
      describe table itab lines tc_itab-lines.
    endmodule.                 " status_0100  OUTPUT
    *&      Module  user_command_0100  INPUT
    module user_command_0100 input.
      data field(20).
      data: line_t like sy-index.
      data: lines  like sy-index.
      data line_count like sy-loopc.
      data: begin of cols,
             screen      like screen,
             index       type i,
             selected(1) type c,
             vislength   like icon-oleng,
             invisible(1) type c,
           end   of cols.
      case ok_code.
        when 'DELE'.
          delete itab where sel eq 'X'.
        when 'ENTE'.
          check *mch1-charg is not initial.
          read table itab into witab with key charg = *mch1-charg.
          if not sy-subrc is initial.
            witab-charg = *mch1-charg.
            select single matnr from mch1 into witab-matnr
                               where charg eq witab-charg.
            if not syst-subrc is initial.
              set cursor field '*MCH1-CHARG'.
              message e115(12) with *mch1-charg.
            endif.
            select single maktx from makt into witab-maktx
                               where matnr eq witab-matnr
                                 and spras eq syst-langu.
            witab-erfmg = 1.
            concatenate witab-matnr witab-charg into lv_objek .
            clear ls_inob .
            select single * into ls_inob
                            from inob
                            where objek = lv_objek and
                                  klart = '023'    and
                                  obtab = 'MCH1' .
            select single atflv from ausp into witab-menge
                     where objek = ls_inob-cuobj and
                           klart = '023' .
            append witab to itab.
    **added
            clear *mch1-charg.
    **added
          endif.
        when 'SAVE'.
          if mkpf-budat is initial.
            set cursor field 'MKPF-BUDAT'.
            message e055(00).
          endif.
          if mseg-lgort is initial.
            set cursor field 'MSEG-LGORT'.
            message e055(00).
          endif.
          if mseg-umlgo is initial.
            set cursor field 'MSEG-UMLGO'.
            message e055(00).
          endif.
          if mseg-bwart is initial.
            set cursor field 'MSEG-BWART'.
            message e055(00).
          endif.
          refresh imseg.
          loop at itab into witab.
            move-corresponding witab to wmseg.
            append wmseg to imseg.
          endloop.
          call function 'ZMM_POPUP_WITH_DATA'
            exporting
              imseg  = imseg
            importing
              answer = answer.
          if answer eq 'Y'.
            perform create_goods_movement.
          endif.
        when 'P--'.
          clear ok_code.
          perform paging using 'P--'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P-'.
          clear ok_code.
          perform paging using 'P-'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P+'.
          clear ok_code.
          clear lines.
          perform paging using 'P+'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P++'.
          clear ok_code.
          perform paging using 'P++'.
          set cursor field 'MARA-MATNR' line 1.
        when 'SORA'.
          read table tc_itab-cols into cols with key selected = 'X'.
          if sy-subrc is initial.
            field = cols-screen.
            field = field+5(10).
            sort itab ascending by (field).
          endif.
        when 'SORZ'.
          read table tc_itab-cols into cols with key selected = 'X'.
          if sy-subrc is initial.
            field = cols-screen.
            field = field+5(10).
            sort itab descending by (field).
          endif.
        when 'PRNT'.
          perform write_alv.
      endcase.
    endmodule.                 " user_command_0100  INPUT
    *&      Module  read_table  OUTPUT
    module read_table output.
      mara-matnr = witab-matnr.
      makt-maktx = witab-maktx.
      mch1-charg = witab-charg.
      mseg-menge = witab-menge.
      mseg-erfmg = witab-erfmg.
      line_count = sy-loopc.
    endmodule.                 " read_table  OUTPUT
    *&      Module  write_table  INPUT
    module write_table input.
      witab-matnr = mara-matnr.
      witab-maktx = makt-maktx.
      witab-charg = mch1-charg.
      witab-menge = mseg-menge.
      witab-erfmg = mseg-erfmg.
      modify itab from witab index tc_itab-current_line.
    endmodule.                 " write_table  INPUT
    *&      Module  exit  INPUT
    module exit input.
      leave to screen 0 .
    endmodule.                 " exit  INPUT
    *&      Form  create_goods_movement
    form create_goods_movement .
      clear : gv_header, i_return[], i_goodsmvt_items[].
      gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
      gv_header-pr_uname = sy-uname.
    GM with reference to reservation
      loop at itab into witab.
        i_goodsmvt_items-material   = witab-matnr.
        i_goodsmvt_items-entry_qnt  = witab-erfmg.
        i_goodsmvt_items-entry_uom  = 'ST'.
        i_goodsmvt_items-move_type  = mseg-bwart.
        i_goodsmvt_items-plant      = mseg-werks.
        i_goodsmvt_items-stge_loc   = mseg-lgort.
        i_goodsmvt_items-move_plant = mseg-umwrk.
        i_goodsmvt_items-move_stloc = mseg-umlgo.
        i_goodsmvt_items-batch      = witab-charg.
        append i_goodsmvt_items.
      endloop.
    find BAPI processing transaction
      if gv_code is initial.
        perform determine_bapi_code using mseg-bwart
                                 changing gv_code.
      endif.
      call function 'BAPI_GOODSMVT_CREATE'
        exporting
          goodsmvt_header  = gv_header
          goodsmvt_code    = gv_code
        importing
          goodsmvt_headret = gv_headret
          materialdocument = gv_matdoc
          matdocumentyear  = gv_matyear
        tables
          goodsmvt_item    = i_goodsmvt_items
          return           = i_return[].
    cancel blocking process
      loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
        exit.
      endloop.
      if sy-subrc ne 0.
        refresh i_message_tab.
        call function 'BAPI_TRANSACTION_COMMIT'
          exporting
            wait = 'X'.
        wa_message_tab-msgid = 'M7'..
        wa_message_tab-msgty = 'S'.
        wa_message_tab-msgno = '060'.
        wa_message_tab-msgv1 = gv_matdoc.
        wa_message_tab-msgv2 = ''.
        wa_message_tab-msgv3 = ''.
        wa_message_tab-msgv4 = ''.
        append wa_message_tab to i_message_tab.
      else.
        refresh i_message_tab.
        call function 'BAPI_TRANSACTION_ROLLBACK'.
    write a message as there is an unexpected error.
        loop at i_return.
          wa_message_tab-msgid = i_return-id.
          wa_message_tab-msgty = i_return-type.
          wa_message_tab-msgno = i_return-number.
          wa_message_tab-msgv1 = i_return-message_v1.
          wa_message_tab-msgv2 = i_return-message_v2.
          wa_message_tab-msgv3 = i_return-message_v3.
          wa_message_tab-msgv4 = i_return-message_v4.
          append wa_message_tab to i_message_tab.
        endloop.
      endif.
      call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
        tables
          i_message_tab = i_message_tab.
    endform.                    " create_goods_movement
    *&      Form  determine_bapi_code
    form determine_bapi_code using p_bwart type bwart
    changing p_code type bapi2017_gm_code.
      data: lt_t158b type table of t158b with header line.
      clear p_code.
      select tcode from t158b into corresponding fields of table lt_t158b
      where bwart eq p_bwart.
      loop at lt_t158b.
        select single gmcode from t158g into p_code
        where tcode eq lt_t158b-tcode.
        if sy-subrc is initial.
          exit.
        endif.
      endloop.
    endform. " determine_bapi_code
    *&      Form  paging
    form paging using code.
      data: i type i,
            j type i.
      case code.
        when 'P--'. tc_itab-top_line = 1.
        when 'P-'.
          tc_itab-top_line = tc_itab-top_line - line_count.
          if tc_itab-top_line le 0.
            tc_itab-top_line = 1.
          endif.
        when 'P+'.
          i = tc_itab-top_line +  line_count.
          j = tc_itab-lines -  line_count + 1.
          if j le 0.
            j = 1.
          endif.
          if i le j.
            tc_itab-top_line = i.
          else.
            tc_itab-top_line = j.
          endif.
        when 'P++'.
          tc_itab-top_line = tc_itab-lines - line_count + 1.
          if tc_itab-top_line le 0.
            tc_itab-top_line = 1.
          endif.
      endcase.
    endform.                    " paging
    *&      Form  write_alv
    form write_alv .
      perform find_list_header.
      perform fill_field_cat.
      perform fill_sortinfo.
      g_repid = sy-repid.
      gs_layout-colwidth_optimize = 'X'.
      gs_layout-zebra             = 'X'.
      answer = 'Y'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_buffer_active        = ''
          i_callback_program     = g_repid
          i_save                 = 'A'
        i_callback_top_of_page = 'TOP_OF_PAGE'
          is_layout              = gs_layout
          it_fieldcat            = gt_fldcat[]
         it_sort                = gt_sortin[]
        tables
          t_outtab               = itab[].
    endform.                    " write_alv
         Form  find_list_header
    form find_list_header.
      data : v_datum(10),
             v_datlo(10),
             v_dathi(10),
             v_uzeit(8).
      clear: gt_header, gt_header[].
      gt_header-typ  = 'H'.
      gt_header-info = sy-title.
      append gt_header.
      clear gt_header.
      gt_header-typ  = 'S'.
      gt_header-key  = 'Çalıştırma Zamanı : '.
      write syst-datum to v_datum.
      write syst-uzeit to v_uzeit.
      concatenate v_datum '/' v_uzeit into gt_header-info.
      append gt_header.
    endform.                    " find_list_header
         Form  fill_field_cat
    form fill_field_cat.
      refresh gt_fldcat.
      clear   gt_fldcat.
      gt_fldcat-key = 'X'.
      add-fieldcat 'MATNR'  'MARA' ''.
      add-fieldcat 'MAKTX'  'MAKT' ''.
      add-fieldcat 'CHARG'  'MSEG' ''.
      gt_fldcat-do_sum = 'X'.
      add-fieldcat 'MEINS'  'MARA' 'Olcu Birimi '.
      gt_fldcat-do_sum = 'X'.
      add-fieldcat 'ERFMG'  'MSEG' 'Adet'.
    endform.                    " fill_field_cat
         Form  fill_sortinfo
    form fill_sortinfo.
      gt_sortin-up            = 'X'.
      gt_sortin-fieldname     = 'MATNR'.  append gt_sortin.
    endform.                    " fill_sortinfo
         Form  top_of_page                                              *
    form top_of_page.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        exporting
          i_logo             = 'ZKUTAS'
          it_list_commentary = gt_header[].
    endform.                    " top_of_page

    HI,
    if it is a normal report program then you can directly create a Selection screen field.
    After the Type-pool you can use Parameters or Select-options to create the selection screen field..
    If it is a Modulpool program then you can create a selection scren field like
    SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
    PARAMETERS: p1(10) TYPE c.
    SELECTION-SCREEN END OF SCREEN 1100.
    defines a selection screens – 1100 – as subscreens.
    The next screen number of screen 100 is 100 (statically-defined).
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      CALL SUBSCREEN area INCLUDING sy-repid number.
    PROCESS AFTER INPUT.
      MODULE cancel AT EXIT-COMMAND.
      CALL SUBSCREEN area.
      MODULE user_command_0100.
    look at the below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
    Regards
    Sudheer

  • Add new field in selection-screen and output dynamically

    hi gurus,
      i need to add field in selectio-screen.
    i need to validate the field with existing fields.
    i need to add this in alv grid output list dynamically.
    thanks & regards,
       kgn9.

    Hi
    Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
    FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
    ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
    IF SY-SUBRC = 0.
      <BKTXT> = <.....>.
    ENDIF.
    Max

  • Add custom fields on selection screen  and ouput in Transaction QM11

    Hi All,
       i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
      i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
    please requeting the help asap if it is possible.

    Have a glance in below thread.
    Enhancing transaction QM10
    Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

  • Transaction DP97: Need to add 2 fields on selection screen...

    Hi,
    I am using ECC6.0. I need to add 2 extra fields on selection screen of transaction DP97. Program name is RVPKMASS97. i did not find any screen-exit for this. Please can anybody suggest any other way to add fields on selection screen... I think i can use enhancement points. please help if anybody has previously worked on this. I need to know following things:
    1) how to add 2 fields on selection screen ( 2 fields are : MATNR-Service product and FFPRF-DIP profile)
    2) where to add programming logic for this
    Thanks in advance,
    Minal

    Hi,
    Go to program RVPKMASS97.
    Go inside INCLUDE rvpkmasspar.
    (When you double click on the include a pop up screen will come up and in that select the RVPKMASS97)
    Click on spiral icon there on the tool bar.
    right click on the '
    ENHANCEMENT-POINT RVPKMASSPAR_01 SPOTS ES_RVPKMASSPAR STATIC INCLUDE BOUND .' line and select enhancement-> create. and give some implementation name and text.
    now you can declare ur fields in this implementation.
    After declaring save it and activate it.
    Now go back to ur txn and run. you are able to see the custom fields on the screen.
    Reward me points if it is helpful.
    I think it will help you out.
    Thanks,
    Prasanna

  • Process to add  new field to Account screen and update value from R/3...

    We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
    What exactly is involved in this process?.
    I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
    Any help would be much appreciated.
    Jason
    Edited by: Jason Stratham on Apr 14, 2010 1:11 PM

    Jason,
    If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
    May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
    you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
    Thats it...
    Regards, Sudeep..

  • Add a New Field to Selection Screen of VL10 Transactions problem

    Hello,
    i have tried to add a selection field in the VL10G. I have used the docu from Gaurav Jagya (Thanks to Gaurav) an followed the steps. Here you can find the docu: Link: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07c282f-e2b4-2c10-e4b3-a314fc17b6a1]
    In the Step 2 , Point 4 i declare the Select option ST_MTART and use it later in Step 5  in the form USEREXIT_SELECT_OPTIONS_TRANSF.
    Step 2.
    4. Write the declaration of new select-option inside include ZV50RSEL_MTART.
    DATA: V_MTART TYPE MARA-MTART.
    SELECT-OPTIONS: ST_MTART for V_MTART.
    Step 5. Transfer values from selection screen to range.
    For this step, again an access key is required to modify include V50R_USEREXIT_TRANSF.
    1. Open include V50R_USEREXIT_TRANSF in change mode. It will ask for an access key. Enter the same and proceed.
    2. Write following line of code inside form USEREXIT_SELECT_OPTIONS_TRANSF:
    CX_SELECT_OPTIONS-MTART = ST_MTART[].
    When i start the VL10G it works fine, but when i start another VL10* transaction i get a dump. Example VL10:
    Runtime Errors         SYNTAX_ERROR
    Date and Time          20.04.2010 13:54:00
    Short text
         Syntax error in program "RVV50R10C ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLV50R_PRE" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "RVV50R10C " in include
          "V50R_USEREXIT_TRANSF " in
         line 18:
         "field "ST_MTART unknown. .."
    It dumped, because the form V50R_USEREXIT_TRANSF is used in EVERY VL10* transaction and the select-option is declared ONLY in my Z-include.
    Is the someone out there, who has solved the problem? Is the an error in the docu or am i wrong?
    Thanks!
    Andreas

    Has there been any further information on this issue in this or any other threads. I am encountering the same issue as identified by Andreas.
    Thanks,
    Brian

  • Add a New field in Selection Screen of Transaction CNS0

    All,
    I need to create a new field in the selection screen of CNS0. Its a transaction (dialog) not a report.
    Please find the image (will give more info on where to add)
    http://img18.imageshack.us/img18/5319/cns0.gif
    What are the options Any exits of Badi's ? any other options
    a®

    hi
    look at this scenario:
    1.  RCNSHSEL modifications:
    ENHANCEMENT-POINT RCNSHSEL_G7 SPOTS ES_RCNSHSEL.
    *$*$-Start: RCNSHSEL_G7-------------------------------------------------------------------------$*$*
    ENHANCEMENT 4  MGV_GENERATED_RCNSHSEL.    "active version
      LOOP AT mgv_matnr_selopt_tab.
        CONCATENATE mgv_matnr_selopt_tab-name'[]' INTO
        mgv_matnr_selopt_tab-name.
        ASSIGN (mgv_matnr_selopt_tab-name) TO <mgv_matnr_selopt_conv>.
        IF sy-subrc IS INITIAL.
          CALL FUNCTION 'MGV_SELOP_AFTER_START_OF_SEL'
               EXPORTING
                    SELOPT_NAME = mgv_matnr_selopt_tab-name
               TABLES
                    RANGE       = <mgv_matnr_selopt_conv>.
        ENDIF.
      ENDLOOP.
    ENDENHANCEMENT.
    ENHANCEMENT 6  ZNEWENH1.    "active version
    *>> ds
    if sy-tcode = 'CNS0'.
    submit z_report_with_selscr and return.
    endif.
    *<< ds
    ENDENHANCEMENT.
    *$*$-End:   RCNSHSEL_G7-------------------------------------------------------------------------$*$*
      TABLES: ACT01,
              AFFL,
              AFKO,
              AUFK,
              PROJ,
              PRPS_R,
              RESB01,
    2. new program: z_report_with_selscr
    REPORT  Z_REPORT_WITH_SELSCR.
    parameters: lgort like vbap-lgort obligatory.
    start-of-selection.
    export lgort to memory id 'ZZLGORT_IN_MEMORY'.
    3. code in BADI: DLP_COMPONENT_FILTER
    import lgort from memory id 'ZZLGORT_IN_MEMORY'.
    regards,darek

  • Adding a new field to selection screen -Effect on variant

    Hello,
      If we add a new (non obligatory) field to a slection screen, is there any impact on existing variants? Does SAP regenerate each variant when the screen change transport get applied? We had a DB lock jam situation in our PRD system for VARI table and the previous day some program changes with a added selection screen parameter ( a check box) had moved).
    Regards,
    Hari.

    Adding a field to the selection screen shouldn't affect existing variants (but the field will be blank for all variants). However, if there is a problem, you should be able to retrieve variants with program RSVARDOC_610.
    Rob

  • QM01 - Add new fields under SUBJECTS tab for notification type Q2

    Hi Experts,
    My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
    I followed the following steps to achieve this :
    [ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
    Now I arrived on the screen where we have to define the custom screen area and  screen number.
    But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
    Please refer to below screen shot for better understanding :
    Please help ! Thanks in advance.
    Kind Regards,
    Ashish Goyal

    Dear narendra bora 
    You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split. 
    But it is not possible to enter two users in reported by field.
    I hope this will resolve your issue.
    Regards

  • Add new field to a screen

    Hi,
    I am trying to add a new check box to a custom screen. This check box must be connected to a new custom field of KNA1 table.
    I have created a new z data element (CHAR) and a new z field on KNA1.
    I have created the check box on the custom screen using screen painter.
    When I change the value directly to the table I can see the change to the check box.
    The problem is that I can't make changes through the check box (I change the value from the checkbox but after saving, the value doesn't cange to the table).
    Is something more that I have to do?
    Thanks in advanced.

    In our custom screen there are other check boxes that are not defined on FIELD statement and they functioning (when I change them, the contents of the table field changes). One of these checkboxes
    is called ZZDATA_PUBLIC.
    I have noticed that there is a subroutine called batch_input_0200 that has among other the following statements:
    DATA: my_bdc LIKE bdcdata OCCURS 10 WITH HEADER LINE.
    PERFORM bdc_field TABLES my_bdc USING 'KNA1-ZZDATA_PUBLIC'
                                    kna1-zzdata_public.
    there are PERFOM statements for every field on the screen.
    The problem is that when I add a new PERFORM statement for my check box the program does not save the changes (When I change the value of the screen fields and save the values does not pass to the table)
    the code of the form bdc_field is the following:
    form bdc_field tables pt_bdcdata structure bdcdata using pw_fnam pw_fval.
      clear pt_bdcdata.
      pt_bdcdata-fnam = pw_fnam.
      pt_bdcdata-fval = pw_fval.
      append pt_bdcdata.
    endform.    
    can anyone help me?
    Thanks
    Edited by: Odysseas Spyroglou on Jun 10, 2009 8:08 AM

  • Adding Field on Selection Screen in Standard program

    Hiiii,
    We have a requirement to add a field Business Place (BUPLA) on the Selection Screen.
    TCode - S_ALR_87012082, Program Name - RFKSLD00
    Please give me some idea, so that i can modify this program !!
    Nitin Garg

    Hii Klaus,
    Okay, If as per your aspects there is no need of modify logical database, so Plz let me know how can i enhance  RFKSLD00 to add Business Place.
    I try to find Badi for it, but i think there is no suitable Badi findings . Plz give solution soon .
    Nitin Garg
    Edited by: Suhas Saha on Oct 19, 2011 2:22 PM

  • Need to add date field on select screen of report RM06INP0.

    Hi All,
    I have to create a new report ZRM06INP0 as a copy from RM06INP0 and add a field in the selection.
    When the selection "Price Determination w/o PO" is not picked then we need a maintainable field from the info record. The default for the date is 9999.12.31 and should manually maintained. This date shoulde be written in the info record.
    How to achieve this?
    Please see OSS Note 392 988 Solution to 2 for more info.

    Hi Akash
    What kind of date is you wanted? You can try to find it in dynamic selections.
    regards,
    Archer

  • "MAXIMUM NO OF HITS" field in selection screen for Product Search

    Hi all,
       We are  running on SRM 4.0.I have a query regarding the Selection screen which appears for the Product Search when we click on the "inetrnal Goods/Servcies" link...
        I have developed a Z-serch help for the Product search wherein i have control of  all the other fields lik "Product ID"," Product description " etc..But not "Maximum no of hits" (since it is  a part of the std functionality)...In the selection sceen field " Maximum  no of hits" ,whatever value i enter  that value is not considered...So is there any way that this field is not diplayed on screen/can be disabled(made an O/p field)...
      All suggestions are  welcome....Please  help...
    Thanks & Regards,
    Disha.

    Well,
    You're talking about COLLECTIVE search help. You won't definie Max No of hit at this level.
    Define an elementary search help and assign to this one a dialog mode (retriction or set of values).
    Regards,
    Bertrand
    PS : Don't forget reward points

  • User exit or Badi to add custom fields in selection screen of tcode CATS_AP

    Hi Guys,
    I want to add a custom field to the selection screen of report RCATS_APPROVE_ACTIVITIES (tcode CATS_APPR_LITE).
    I also want to display filtered by this custom fields.  Please let me know the user-exit (prefebly) or BADI.
    I will appreciate if somebody can share the steps.
    Thanks,

    Hi,
    Yes there is, the BADI name is CATS_REPORTING.
    It can be views in transaction SE17.
    thanks.
    JB

Maybe you are looking for