Add New Keyfigure In Cube

Hi Bw Experts I have simple question, I have a FIAP cube when i go to key figures tab in Infocube I see list of key figures on left and Right, I have a key figure "Number of Invoices" which is not in cube and it does not appear that in ODS which shich spply data to cube and also not there in datasourceOFIAP_C03, Now i see that I went Infoobject screen in RSA1 and found that its a part of SRM APPlication Infoobject catlog and it does not appear in Account payable catlog, I am wondering can I be able to still include the "Number of Invoices" key figure in Account payable CUBE and does it will show me value,"Number of Invoices" key figure is active but our company did not implement the SRM, so will it be of any use to add the "Number of Invoices" key figure in Account payable CUBE AND WILL IT GET THE VALUE
[pLEASE REPLY VERY SOON
SONIYA

Hi Soniya,
You can surely add any KF to any cube, but you need to see if you will get a value for it as well. Since your cube is supplied with data from an ODS, either you need to add the KF to the ODS and fill it with values from the source of the ODS, or you need to do some calculation in the update rules from the ODS to the cube.
Hope this helps...

Similar Messages

Add new keyfigure in SNP PB

Hello,
I need to add a new key figure in SNP PB to input values manually.
I was trying to use a standard KF that is already in PA and that we are not using but when I try to change this KF in tcode /SAPAPO/SDP8B to set an input/output row, system gives me this message when saving:
"Key figure <Aggregated distribution receipt (plnd)> must not be set to ready for input".
I only have a few KF left to use and all gives me this error except 9AAFCST, but this one does not allow negative values (system set to 0) and the row I need is to input values than with a macro should change the Total Demand (to add or diminute).
Anyone knows how can I do this?
Thanks,
Teresa

Hi,
what do you mean by a Z Time-series keyfigure, how can I do that?
We can create a new keyfigure Z and add it to PA and PB? I just want a simple input keyfigure to use in a macro to sum to the real standard forecast that comes frm DP.
Regards,
Teresa

How can i add fields to a cube which is in production support

hi,
how can i add fiels to a cube which is in production support.

Hi Maruthi
You need to add new fields to cube in Development system and then transport it to production after testing.
Edit cube in RSA1. Add the new infoobjects from right hand directory to left hand pane and assign these new infoobjects to suitable dimensions. Save and activate the infocube. Now go to change update rules for this infocube and do proper mapping of these infoobjects.
Save & activate the update rules.
RSA1-> Transport connection-> select cube, update rules and related objects and create transport request.
After testing is done, give the transport request number to your Basis person and he will do the transports for you.
Regards
Pradip

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

Not able to add new fields in Content cube

Hi all
I think I had this post earlier too, but I haven't been able to add new fields in a Business content cube. I added them in the cube but I am not sure how to update the datasource, infosource, update rule etc. in proper manner.
Please write me the details or send me in my email at
[email protected] , I would be so happy for your help.
Thank you in Advance.
Sajita

Roberto;
I am doing the third options. feeding data from source system and I tried to add them into the infosource it didn't work. In this case, do you think I need to update the data sourece too, if so how do I do that it's function module. data source I am using is '0ME_ISM_AM_REV_1'. So please give me some more details. Thank you.
Sajita

To add new key figure in existing info cube (BI 7.0)

I m using BI 7.0
How can I add new Key figure in my existing info cube?
Thanks
KS

hi,
check the following the links
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
thread's regarding remodeling
Remodeling Toolbox
Remodelling option in 7.0
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=remodeling+&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
hope this help you
happy new year 2008
regards
harikrishna N

Add new key figure and characterstic into cube without touching historical

Hi ,
I have cube in prodcution which has historical data of last 4 years .
Now buisisness is asking me to add one keyfigure and and one characterstic to cube without tcouchingand next load these 3 fileds to be populated .
is it possible to this ?
Please let me know

check the blog by Nagesg Ganisetty regarding remodelling option available in 7.0.
thats a good blog and very informative.
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm

How to add new Measures in WEBOSA (Measures are already present in Mviews but needed to be mapped to cube)?

Hi
I am using WEB OSA (Oracle Sales Analyzer) cubes.
Now we had a requirement to add new measure to the existing cube. In the materialized views we successfully added the new column. But coming to cubes we are unable to map the new measure to View. We are using Express Relational Access Administrator for modelling the cubes.
In Cubes I created the measure. and in view also i added the new measure in data base. but in administrator i am not seeing the newly added column.
need ur help on the same.
Thanks in Advance
Sravan.

Hi Sravan,
My memory of these Oracle products are a little fuzzy since we stopped doing development on RAA/RAM back in the year 2000 - exactly 15 years ago!
I recall that the Relational Access Administrator i.e. the RAA admin tool stores the sources i.e. Tables or Views that you include in your project as a set
of metadata in the Warehouse Metadata tables or known as the "WH" tables. I believe your issue is one that the definition of the view as stored in the
WH metadata tables does not include your new measure view column. I believe there is a way to "update" the definition of the view as stored in the
WH metadata tables. I believe there is a wizard that you can run that will show the current and new version of the source table or view and allow the
RAA to update the source definition to the new definition. At this point, you can hopefully map your model measure to the source view column and then
run a new build.
Out of curiosity, please provide the versions you are running for:
1) The windows O/S that you are running the Express Relational Access Administrator
2) The version of the Express Relational Access Administrator
3 The Oracle database version
Finally, please send me a note as to why you are still using this very old (but good) technology. Another words, do you feel the
more recent offerings from Oracle do not satisfy your business requirements or some other reasons for not modernizing your
applications?
Thanks,
David

No new data in cube after a incoming maintenance job

Hi,
I thought I had read about this topic before, so I tried searching the forum but I didn't find any relevant threads.
Anyways,
I have a cube(partitioned along month) that I want to add new data to every day. I maintain the cube using AWM and accept all the default values for the maintenance job except for in the "cube data processing options" where I select "aggregate the cube for only the incoming data values".
But after I do this, none of the new data is shown.
I have mapped the cube to a view where I only have the data from the last couple of days to limit the load. When I do a select count against the view i get the result 150961 rows. When I check the xml_load_log I see this: Processed 150961 Records. Rejected 0 Records.
Some of the data in the view already exists in the cube, and some are new and its the new data that's not there.
I used OX to check the prt_topvar and the data isn't here either.
When I do the maintenance it takes about 15-20 minutes so everything seems normal.
Anyone have any ideas what might be wrong? any suggestions would be appreciated.
regards Ragnar
edit: I just did a similar maintenance, but this time I limited the view to only new values and the time it took was just 15 seconds from it started the load of measures and until it was done with the solve.
Message was edited by:
rhaug

Once again, thank you for your reply.
Regarding the 10.2.0.3A patch: Unfortunately the only access I have to the server is with developertools like AWM, OWB, sqlplus etc. so I'm not able to check out whats located in the home of the DB(I guess this is where the executable objects would be). Whenever support wants me to apply a new patch I have to ask my DBA, but he is on vacation at the moment and that makes it a bit more difficult. Hopefully he still has the log file and I can check it out once he gets back. So for now I'm not doing anything more with checking if the patch is properly installed.
Regarding maintenance of incoming values: I found a nice workaround for this one.
To describe a little more how it was when it wouldn't work. The cube is partitioned along months in the timedimension, and for every new day I would add that level in the timedimension as well. If I was to create a report today, the highest date I would see would be wed July 18. Then after a new maintenance of incoming values tomorrow, the highest value would be thu July 19, and so on. The logic in the source views for this works perfectly for me, but would easily be a source for error as well if you are not 100% sure on how this would work for you.
What I had to do in order to make the cube load the incoming values: On my first initial load of the cube, I loaded every day up until 31-12-2007. After I did this maintenance of incoming data works fine, and I suspect it will throughout the year. This might be the way it should be as well, I'm not sure. Seems like you have to include all the days in the partition when you do a full aggregation in order for the maintenance of the incoming values to be updated. What I noticed was that it would update days that was already partially loaded, but not days that was added from the incoming maintenance.
Hope this made some sense to read.
regards Ragnar

Adding new characteristics to cube with data

Hi Gurus,
i need to add some characteristics to a cube already in production, this cube is customized version of material stocks/movements cube (0ic_c03).
i am looking for a way to add the new characteristics without having to do reinitialisation (opening stock,...), i am thinking about a loopback process but how do i manage to get the new characteristics populated for the historical data?
Thank you.

Hi,
If you want to load historial data, you must take ECC down time and re-intialization is required.Becasue you are adding new object in Cube and for that you need to change the Update rules, then need to load historical data, so without down time and reinitialization it is not possible.
Check like below.
You have data in PSA, so try to delete data from Cube and then load from PSA. Because you may write code in Update rules on;y I think. So in that case, it may work.
Thanks
Reddy

How To Add New Key Figure in Manual Planning

Dear All
Please Help
I Already implement BPS for 2 year.
Now user want to add new key figure in Cube.
I already add new key figure to cube and activated it.
But in Manual Planning, The new key figure not show in selection
what I must do?
Please Help.
Thanks

Hi,
not all key figure types are supported in BPS.
1. All key figure types must have aggregation SUM, SUM.
2. Supported key figure types:
- amout
- quantity
- number (integer, float, dec)
- time, only type DEC
- datum, only type DEC
All other key figures are filtered out and are not available in BPS.
Regards,
Gregor

Hi Gurus, To Add New key figure in BW 3.5 flow ODS- Infoset

Hi Gurus ,
I have rquerimennt to add a new keyfigure in ODS and then into Infoset . The histrorical data for this keyfigure is not needed . Can you please let me know what the are changes needed to be done in Transfer structure -> cs->updaterules->ods->infoset.
should i delete data from dso before I add keyfigure?
Rehards
sriram

Hi
are going to get the values for the new key figure from source or is it going to calculate in BW side?
If yes, then add that key figure in source DS, replicate the same BW system.
Now add this key figure to your ODS and activate.
create transformation for this. and activate.
as this is key figure, you will get data for this in info set automatically.
Regrads,
Venkatesh

Add new key figs or characteristics and "Repair full request"

Hi Gurus, here are my questions
1.If I add new key figs or characteristics(which are not Key fields) to ODS and Cube containing tons of data, Will the transport for structure changes fail due to presence of data?
2.The extractor to the ODS which inturn is feeding the cube, is delta enabled. So the newly added objects wont have entries for historical records. If I change this extractor to "Repair full request" after adding the new fields, will the new fields then get populated?
3. After the "Repair Full Request" activity, Can I change the Infopackage setting back to delta update mode?
Thanks for the help in advance!!
Simmi

Hello Simmi,
1. Transport should go fine. As you are not changing the key fields, it should not cause any problem even if data is present.
2. Yes. But make sure what data you want to laod. As with full repair, system is not going to check for duplicate data. The responsibility lies with you.
3. Sure. if you mark the full load as repair, the delta settings will be unaffected.
Hope it helps.
Regards,
Praveen

How to add new column to COPA datasource?

Dear all,
It seems we have to delete the COPA datasource and regenerate it when we need add new column, if so,we should regenerate the initialIzation for the delta.
Beacause only the new delta data need have value for new column,so I do not want to reextract the historical data,do you have any solution?
Best regards
Simon

Hi Simon
You are correct, COPA DS need to be regenerated.
Initialize without Data Transfer might help you. But was thinking how do you manage the 'lost' delta in between the processes?
I m not sure about your flows i.e how data moves from PSA to cube but I think at least you should
Initialize the delta for the current fiscal year ( with Data Transfer) and then continue with delta.
Which type of COPA you are using? Account based or Cost Based? For Acc Based delta initialization starts from summarization level , so you also need to fill up summarization level at least for the current year.
Regards
Anindya

How to add new product in interactive demand planning(IDP)

Hi gurus,
How to add new product in interactive demand planning(IDP), can you suggest me, when i click data view in IDP, it will show new product.
Regards
babu

Hi Raj,
Since the New Product is already in MPOS what you need to do in your Data view is to go to "Selection Window" on the left side of the screen(make sure you dont click on the existing selection ids). Select Product at the top, the planning version will come in the next row and then you again select the Product as charateristic and enter the New product name against the Product(Characteristic) and then save it in case you want it to use for your future references. When you will double cilck on the newly made selection id you will be able to see you product with the keyfigure details in right side.
Please let me know if it works.
Thanks,
Anand.

Add New Keyfigure In Cube

Similar Messages

Maybe you are looking for