Add new Location code in Investment Management
Hi Gurus,
Please Suggest How to create new Location Code in Invest Management .
Thanks in advance..
Ramanjaneyulu
Hi,
you can create it in the master data or copy from the order; check the link: http://help.sap.com/erp2005_ehp_04/helpdata/EN/2a/f9f273493111d182b70000e829fbfe/frameset.htm
BR, Tomislav
Similar Messages
-
How to add new T Code FB01L in OBU1
Dear Expert,
How to add new T Code FB01L in OBU1
Regards,
AlokHi, Alok.
It is not possible to add new entries to table TSTCP via transaction OBU1 (you can only modify the default parameters for the existing transactions). However, new default parameters for other transactions can be created via transaction SE93 (trans F-44). You can review notes 19798 and 310587 for further information.
I hope this helps.
M Trein -
Add new contact person in contact management
Hi All,
I have been created email in contact management(SRM).
in Tab "General", Contact person field, i cannot select new item/New contact person from combobox.
I have read at HELP file,then i found to add new contact person in contact management, go to SRM menu -> Customizing(UCUS0) ->in the left panel -> clik contact - > double clik contact person.I can direcly add new contact person.
but after i added new contact person.i still can't select new contact person in "General tab(Contact management)".
can u tell me how to solve this problem?
Thanks,
Siandari LimDear William,
There are some notes for enabling the b2b flag. E.g. 1263919 and 1263915 and likely some more. So, that might help you figure out if perhaps you have missing settings for this feature.
But based on the limited information you provided it seems that "Segmentation based on relationships" would be suitable. You can check [SAP help|http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/37/fc60e3bebf4a9ba7121c00e295b3fd/frameset.htm ] for this topic. I was not sure what you meant by "but how to replace the contact person function?"
Quick excerpt:
Segmentation based on relationships offers you maximum flexibility when modeling target groups, especially in business-to-business scenarios. You can select business partners using filters for both personal data as well as data relating to the business partner's organization. The system saves all required information on the business partner, such as contact person, organization, and relationship type, with the target group. In the campaign, the contact person is contacted using the address data of the contact person's organization.
Hope this helps!
Anik
SAP CRM Marketing Moderator -
Add New Transaction code at OMBR - Version Print Indicator
Hello
I need to add one transaction in the Version Print Indicator List. I know it can be done.
Can any one guide me how to do, as "New entries" is grey there. ( To best of my knowledge it is done through some other route or means)
RegardsHi,
Use t.code SE16.
Enter table name T158 and press F5.
This will allow you to add new transactions to the table.
Nir -
Maps 3.09 unable to add NEW location for check-in
3.09 no longer support Checkin, I re-flashed my phone and I totaly lost Checkin :-(
I just found this link, saying add place feature in Nokia Map may disabled in some country, what are the countries which had been disabled to use add place feature?
Anyone know does add place feature in Nokia Map was disable in Malaysia? If yes, why disables it? It's useless for check in if this add place featue is disabled, you cant even add a new place if your check in place not found in the list.
Anyone has clue for this?
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below -
Error - Overview Planning (T.Code IMAPL) - Invest Management
Dear All,
As i am entering the Planned values on the appropriation request using the T. Code IMAPL, i found the bellow shown error.
"Planning profile 000001 does not allow planning in controlling area currency"
I couldn't even unable to view the Approriation Request that i have created at the above mentioned screen (IMAPL)
Controlling Area Currency - USD
Company Code Currency - MYR
System has selected the MYR as default Currency in the Appropriation request that i has created.
So I would like to request you to provide me the solution to over come the above error ASAP.
Thanks in Advance
GopiCheck you configuration node OIP1, the Planning currency and set default object currency check box.
Regards
Sreenivas -
Add new file properties @ knowledge management
hi,
i wanna add new file properties to knowledge management.
but i cant find any source about it.
thanks for replies.
OrhanHi
Please follow below notes
Note 739829 - Central Note for Performance of EP KMC
regards
nag -
Is there any way to make location codes a user maintenance function?
Are volume of new location codes that the business adds to all company codes is taking too much development time. Is there any way to update the table to be handled by the business without transports?
you can set your strokes to not scale by using the properties panel when a stroke is selected.
-
Hi Gurus,
I have to add new company code 7000 to my daily data.
How to add new company code ?
All ready 2000 and 5000 comapny code is available.
That 2000 and 5000 is one info package and abap routine is written in that info package.
Kindly tell me procedure?
Thanks in advance
RamuRoutine changed and added 7000 company code to unfi pack with init with data then populated delta.
-
Hello!
I am not sure if this is the correct thread for this question but I think this is the most appropriate.
My inquiry is how can I configure another system company code? For example, we are now Company A1B1 and would like to add A1B2.
Also, how do I add it to table T043G (Tolerances for Groups of Customers/Vendors)?
Thanks a lot! _Hello Ricardo,
If you want to add new company code then it is suggested to consult with your FICO consultant, because it will require some of the financial settings for that company code i.e. chart of account, posting period etc.
To add Entries in Table T043G you need to do add your company code in OBA3 transaction code.
Hope this helps.
Regards
Arif Mansuri -
m_elensule asks: "Are you planning to add new locations for Skype-in available? Namely, Ukraine?"
Hello We are not currently able to support Skype Number in Ukraine, but we continue to look into how we can increase the list of supported countries. We don't yet have any specific timelines on those. We'll keep our website updated as to any changes in that regard. Thanks for your question
-
Add new Column in Admin Tool including SQL Code
Hi all,
I'm new at OBIEE and I already searched here in forum but didn't found an exact answer what could help me.
I have a table in Warehouse where I get the employee information. That is employee_id, manager_id and name.
Example:
Employee_ID Manager_ID Name
1 Mueller
2 1 Meier
Now I would like to create a new column in BI Admin Tool Business Mapping Layer and add a SQL there to select the name of the Manager.
Is that possible? And how can we do it? Will it work with a new logical column? Where can we add the SQL Code?
Hope somebody can answer my question!
Thanks a lot!
Regards,
DavidHi Alastair,
thanks for your answer. Unfortunately it was not exactly the answer to my question. I try to explain it again.
In phyiscal layer I have the table with Employee_ID, Manager_ID and Name. That I already draged to BMM.
Like I wrote before here is the example again:
Employee_ID: 1
Manager_ID: NULL
Name: Mueller
Employee_ID: 2
Manager_ID: 1
Name: Meier
If I create a report in Answers then it will show the following:
Name: Mueller
Manager: NULL
Name: Meier
Manager: 1
Instead of 1 (the manager ID) I would like to display the Manager Name. In this Example Mueller should be displayed as manager of Employee Meier.
To do this I think I need a query like "select name from TABLE where employee_id = manager_id"
My question is now: How can I create this logic in BMM? I don't want to do this in Answers.
I think there should be a possibility. My idea is to add a new logical column in BMM and add the SQL Code there. But I don't know how I can add the SQL and where I have to add it.
Please help me to solve that issue.
Thanks!
Regards,
David -
Add new manager field in SAP Query
Hi All,
I need to find manager for the employee. Is RH_GET_LEADING_POSITION right function module?
After finding the manager I need to add new field 'Manger' in the existing SAP Query. Please can anyone help me inserting additional code into the SAP Query.
Please kindly help me
Thanks in advance.
Archana.Thanks for the reply. But my question is there is no direct field called manager I need to write a piece of code to find the manager and insert in the existing sap query. I want to know is there any function module to find the manger where import parameters are pernr and export parameter I want manager objid or pernr.
Please help me...
Thanks, -
How Add new Bill to location for an existing Customer
Hi all :
Would you please let me know where can add a new Bill to location for an existing customer ?
OM Superuser > Order, Return > Order Organizer> New Sales Order
Thank youYou can add bill to location as follows
Order Management Super User> Customer > Standard >Find your customer
Add a new address if necessary
And then in Business Purpose area, enter BILL TO as the usage.
Hope this answers your question
Sandeep Gandhi -
Add new code in classification view under material master
Hi Experts!
I need to add new code in classification view, MM03 for class ZZLOCAL. Can anyone guide me to the path?
Please help..
Thanks.this is not customizing, this is standard master data maintenance.
Easiest way to find the menu path is by entering search_sap_menu into the command field.
then you are prompted for search text. here you can either enter a transaction code or a name of transaction.
SAP will give a list with all menues and paths to reach this transaction
Maybe you are looking for
-
How do I get my hotmail folders to show in my iphone mail, after upgrading to ios7?
My iPhone malfunctioned and so theservice providergave me a new iPhone, which already upgraded to ios7. Now I added my hotmail account and none of my hotmail foldersare available. I really need my hotmail email account to be linked tomy iPhone ,as it
-
Can´t play some DVD´s in Apples DVD player, that run well onmy machine(s) before i`ve installed lion. Even if I say in system Preference "when inserting DVD-start DVD player, it starts, but can´t even select the DVD´s. They appear in finder, I can pl
-
Dvi adapter doesnt match???!!!
I bought a mini-dvi to dvi adapter and a dvi to vga adapter (because they didnt have the mini-dvi to vga adapter in stock). Both are Apple adapters. I was going to display my screen on my LCD TV. the DVI end of the one adapter does not plug in to the
-
Unavailable Master Images are present
Trying to relocate masters to an external drive using Aperture 2.1. Project with many albums which I am relocating to folders with the same name as the album on an external drive. Most of the albums I was able to relocate. There are 4 where I get the
-
I'm on a network with 2 printers and want to uninstall only one. How do I do it?
I recently added a Lexmark E260dn printer to my network (still want to have my HP 8550 connected). The printer was faulty so took it back, but want to install another one. How do I "uninstall" just the old info for the Lexmark without losing my HP i