Add New Node - Adobe Director Microsoft Treeview Control 6.0 xtra?

Can some one help me on how to add new node to TreeView Control provided as xtra with Adobe Director. Tried using sprite(1).Nodes.Add but not working. Please assist

Right, I am accessing the control via Insert ->Controls -> ActiveX -> Microsoft Treeview. (unable to find any documentation)
I am actually trying to make a treeview and on selection do some stuff.
I have tried using CxtraPopup to create the same but when publishing it says unregistered version.
Can you please suggest any xtra that supports Menu.
Thanks

Similar Messages

Add new nodes to IDoc in IDoc-XML Schema Mapping with Java

Hello everyone, I'm not very sure if this is the right forum but I have a problem and I haven't being able to find the answer, my scenario is as follows:
-First of all our system characteristics: SAP ECC 6.0, SAP BASIS 700, PI BASIS 2005-1-700 and SAP APPL 600
-We are in Mexico and we are creating our own billing documents with digital signature and a digital certificate in XML format according to SAP Note 1303712 and all derived notes.
-Our actual schema is working fine: We generate our IDocs (one for SD and one for FI) in SAP and we send them to PI XI to be parsed by a JAVA program and then converted to XML.
Now we have the requirement to add new nodes (I might be wrong in the term, feel free to correct me) to the IDoc, it sounds very simple but I have only experience with ABAP and no experience with PI, also it's working only on our production landscape, so if I don't do it right it could be very dangerous.
I have already read the following notes that might help me: 1321680 and 1318342 but their configuration is just in the aplication server and don't mention anything about PI or the Java program.
So, if any one could provide me some kind of guide or important aspects that I should take care (like mapping, structures, etc) to enhance IDocs for this schema i would be very grateful.
I hope this post were clear enough, if it is not also feel free to ask me to clarify or provide more information.
Kind Regards
Omar

Hi Omar,
Since the structure of the IDoc is changing (adding a new node), you would need to do the following in PI:
1) Reimport the IDoc in ESR/IR of PI.
2) Change the mapping/transformation logic in the mapping parser defined. If it is a Java code, you would need to reimport it in the ESR/IR. Use link below to understand more on jave mapping.
http://wiki.sdn.sap.com/wiki/display/XI/BeginnersguidetoJavamappingusingDOMparserinSAPXI
3) Delete the IDoc cache using transaction IDX2, after the IDoc is reimported.
Regards,
Sanjeev.

Add new node on vehicle master

Hello experts,
We have many custom fields on vehicle master and we can't add more than 99 custom fields on same screen (SAP restriction)
Now I want to add new node (like we have data Entry, Service, Document flow)
Once I add new node, we know how to add new tab and fields. But How can we add new node no Vehicle master?
Do we need to use one of below mentioned BAdI or some other and how to do it step by step.
BAdI: Exchange Vehicle Data Screen in Vehicle Detail
Or
BAdI: Exchange Configuration Screen in Vehicle Detail
Please advice.
Thanks

Hi ,
do you want to enhance DBM vehicle master or VMS ?
Regards
Ganesh

SCCM 2007: SQL Clúster Add new nodes

We've installed SCCM 2007 with SCCM DB in a clúster SQL with two nodes (Node1, Node2)
We're going to add two new nodes Nodes3 and Node4. After, we'll remove Node1 and Node2 from Clúster...
I see that SCCM has two site system created (Node1 and Node2) and I don't know if SCCM will add the new nodes automatically when I add the new nodes to the clúster..
Any problem with this??

I have never done it and remote SQL is not best practice anyways.
http://technet.microsoft.com/en-ca/library/bb735870.aspx
So...
http://www.enhansoft.com/

XI 3.1 SR3 on Solaris SPARC - using ccm.sh to add new node ?

Hi,
I'm configuring the XI 3.1 SR3 Integration for SAP component on my newly built BOE 3.1 SR3 environment and have a question on the "configuring SAP server side trust" part of the configuration. On page 91 of the Int Kit for SAP guide it states that :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
The trouble is that the BOE S.1 SR3 administrators guide for "adding a node" on page 63 describes the process on windows where the ccm GUI tools is used. On unix however the ccm.sh command line tool needs to be used and looking at the "ccm.sh -help" options I can't see anything listed that could be used to perform this add node procedure.
Can anyone suggest to me how I can setup this new node that is required so I can continue with the XI 3.1 SR3 Integratrion for SAP setup.
Regards,
Brian.
I'm new to BOE so please accept my apologies if this is a basic task.

Hi Seb,
thanks for this. I suppose I'm unsure on this due to me only just becoming involved with BOE, the Integration for SAP document isn't very clear on this process for setting up a new SIA. I checked with the project manager and this needs to be setup to enable their planned usage. I'll take a look at using the serverconfig.sh utilility to create a new SAPProcessors "node".
I'm assuming I can then use the CMC as per step 2 in the XI3 SR3 Integration for SAP guide, page 91 :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
Regards,
Brian.

OIM-SOA CLUSTER add new node

Hi All,
i need to add a new node to my cluster OIM/SOA.
My env is:
1) cluster 6 nodes whit SOA and OIM
2) the first node have a console weblogic server admin
3) More patchs are installed on
Look at this picture: [https://dl.dropboxusercontent.com/u/9054488/OIM-SOA-CLUSTER.jpg]
I found the proc to doc.id [e10106 pag.523 - 8.9.3.20.1 Scaling Up Oracle Identity Manager] but I don't understand if it is applicable to systems already patched.
There is a procedure already proven and clearer?
Thanks.

In order to add a new node, you must first install all the applications/modules in your middleware home. Install the same patches on top of those. Then using the packEnv scripts to pack up the domain, and then unpack it to your new host.
From the weblogic console, use the option to clone your app server and create a new machine for your new machine instance. Startup your node manager on your new machine, and start your app server.
You just need to make sure to do all the same modifications, if you have any, to your new server, like deploy jar files, make changes to UI interface, etc.
-Kevin

XMLType - add new node (simple question?)

Help me, please. I've spent much time on trying resolve this problem with no result... Give sample code please.
The problem is:
declare
vxml XMLType;
begin
vxml := XMLType('<A><B><C></C></B></A>');
end;
What I have to do in "[...]" to add new child-node to <C> node?
As a result I whant vxml: '<A><B><C><new></new></C></B></A>'.
And please:
- don;t say about updateXML because it works only in SQL-DML
- if You think it necessity to use dbms_xmldom, let me show how (I tried to use xmldom in many ways)
Thank you in advance

Please post this message at:
Forums Home » Oracle Technology Network (OTN) » Products » Database » XML DB

RAC add new node

Hi everybody...
Maybe somebody Knows, any case in wich, add a new node to a RAC configuration different of the rest.
That means the new node have less memory less CPU, can cause degradation to the current configuration.
Thanks.

As long as the h/w specs meet the min requirements, it will not cause any degradation to current configuration. However, say you have two node RAC having different h/w spec and one of them is down, you will face perf degradation anyhow (although it may be more visible if high-end node goes down).

Add New Text - Adobe Acrobat 9.0 Pro

I have scanned in two documents to my Adobe Acrobat 9.0 Pro and now would like to add some text. When I try to select the TouchUp Text Tool it is "grayed out"; in fact the whole Advanced Editing Tool Bar is "grayed out".
I can go to the spot where I want to "add text" and hit control and right click and draw a box, but the New Font dialog box does not drop down?
Can anyone please help or shed some light on what I'm doing wrong?
Regards, June E. Hudspeth
Thank you so much.

I have just re-scanned my document unclicking the "PDA/A Compliant" box and "viola" everything appears to working just "wonderfully"!
Thank you so much for ending two days of total frustration!
I also talked with an instructor who taught the Adobe 8 class & he didn't have a clue as to what was wrong.
Again, I thank you very, very much!
Regards, June E. Hudspeth

HELP!!! add new node

Friends,
Suppose I have following xml
<?xml version="1.0" encoding="UTF-8"?>
<Organisation name="abc">
<employee>
<name>e1</name>
<age>20</age>
</employee>
<employee>
<name>e2</name>
<age>20</age>
</employee>
<employee>
<name>e3</name>
<age>21</age>
</employee>
</Organisation>
Suppose I have to add one more record to it at a particular location (not necessarily at the end)
<employee>
<name>e4</name>
<age>22</age>
</employee>
What is the preferred way to do it ?
XML file is very large in actual scenario.
Earlier I faced problems in reading my XML file using DOM (outOfMemory problem) so I used SAX. Now also I want to use SAX for this(JAXP). But I am unable to find any sample code for it.
Some people suggest to use JDOM in stead.
Pls suggest ASAP.
waiting
regards
Varun

Refer to
http://javaalmanac.com/egs/org.w3c.dom/AddNode.html

Add New Nodes

We have to add to our CW LMS 3.2 some WCS, WLS, ACS, FW.... but we only have HTTP or HTTPS credentials. Would that be enough to manage them? they appear as "?" and no configuration is downloaded...

No, this is not sufficient. You need at least SNMP read-only access to manage these devices. Note: Campus Manager will not support firewalls or the ACS appliance, so a '?' there is expected.

Using Microsoft's TreeView Control in Forms 5.0

I created the OCX item, assigned it the OLE class 'COMCTL.TreeCtrl.1', inserted Microsoft TreeView Control 5.0, imported the appropriate OLE packages and set the appropriate OCX specific properties. With all that done, I created a simple code to clear the nodes collection and then populate it with two dummy nodes. The following is that snippet of code:
PROCEDURE DO$TREE_INIT(
i_study_id IN VARCHAR2 DEFAULT NULL
) IS
v_inodes COMCTLLIB_CONSTANTS.INODES;
v_inode0 COMCTLLIB_CONSTANTS.INODE;
v_inode1 COMCTLLIB_CONSTANTS.INODE;
BEGIN
-- Get pointer to the treeview control's nodes collection.
v_inodes := COMCTL_ITREEVIEW.NODES(:item('CB_MAIN.OCX_TREE').interface);
-- Clear nodes collection
COMCTL_INODES.CLEAR(v_inodes);
-- Create initial tree structure when provided with a study.
IF (i_study_id IS NOT NULL) THEN
v_inode0 := COMCTL_INODES.OLE_ADD(
interface => v_inodes
,relative => OLEVAR_NULL
,relationship => OLEVAR_NULL -- TO_VARIANT(COMCTLLIB_CONSTANTS.TVWFIRST, vtype => VT_R8)
,key => TO_VARIANT('STUD|AA|123|BC|12', vtype => VT_BSTR)
,text => TO_VARIANT('Dursban MOR Study (12312123)', vtype => VT_BSTR)
,image => OLEVAR_NULL
,selectedimage => OLEVAR_NULL
v_inode1 := COMCTL_INODES.OLE_ADD(
interface => v_inodes
,relative => TO_VARIANT(COMCTL_INODE.OLE_INDEX(v_inode0), vtype => VT_R8)
,relationship => TO_VARIANT(COMCTLLIB_CONSTANTS.TVWCHILD, vtype => VT_R8)
,key => TO_VARIANT('FF+|AA|123|BC|12', vtype => VT_BSTR)
,text => TO_VARIANT('Facility Functions', vtype => VT_BSTR)
,image => OLEVAR_NULL
,selectedimage => OLEVAR_NULL
END IF;
END DO$TREE_INIT;
My form complies properly but during runtime I get this error:
FRM-40735: < ... > trigger raised unhandled exception ORA-100504.
This form is very simple. It contains only one control block, the tree control, OLE packages, WHEN-NEW-FORM-INSTANCE trigger, and this package. I have tried everything within my understanding. Do you have any suggestions?
Any help would be appreciated.
Thanks,
Rahul

I have the same situation too. The only solution
I could think of is to install "Additional ActiveX"
from custom VB5 installation. Besides there is
a problem when VB6 is installed, because the controls are
called "Microsft TreeView ... (SP2)".
If you find any progress , keep me in touch :) ...
Iain Sutherst (guest) wrote:
: I have spent sometime implementing ListView and TreeView
: controls (provided by COMCTL32.OCX, under VB 5) in Oracle
Forms
: 5.0, believing that the only files I would need to distribute
: when I came to implement on other machines were COMCTL32.DLL
and
: COMCTL32.OCX, followed by registering COMCTL32.OCX.
: This does not seem to be the case, since the control (ListView
: or TreeView) is not being activated during run-time, and when
I
: try to use 'Insert Object...' in the layout editor for the
: control, nothing happens.
: Unfortunately, I have loaded VB 5, and Oracle Objects for OLE
on
: to my original development environment, and so I cannot now be
: sure whether I need just COMCTL32.* or whether I need
something
: else as well.
: If anyone has had experience of using these controls and has
had
: to roll-out the developed applications to other machines, I'd
be
: grateful for any information.
: Thanks.
: Iain
null

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

How to add new row in KL02 trx - Activity type control data

Hi guys.
I am not a FI-CO consultant, but I want to add a row since KL02 transaction within a cost center, with a new fiscal year. When you access KL02 (change activity type), you set the activity type, then press Master Data and the basic screen appears. If you press the Display planning control button, you will see the "Display Activity Type Control Data" List. I wanna add a row for a specific cost center here, because the cost center I refer has not 2011 as fiscal year. I tried to use, since basic screen of KL02, use the Change planning control button, but when I set my cost center and 2011 as fiscal year, the Save button is inactive. Furthermore, I tried to press the Period screen and a message appeared "No data has been entered yet". So I dont know how to add one row for a cost center in the Planning control (Activity type control data) list of the KL02 transaction, specifically for an activity type. Do you know? Thanks in advance

Hi,
The list of cost centers in which the activity type is planned is given in KL02 under planning data. In order to add a new cost center to this, you need to enter the activity type in transaction KP26 for a particular year.
Goto transaction KP26
Give version - 0
from period 1 to 12
year - 2011
cost center - mention the cost center
Activity type - mention activity type
goto overview screen F5 and add the plan price for the activity in the cost center. This step will automatically add new row in the activity type control data.
Hope this helps.
Thanks,
Ram

How to add new signature in Control Recipe

Hi Friends
I am trying to add new signature/user id in control recipe. But I did not find any option. Can anybody guide me as how to add. Pls send me step by step procedure.
Thanks

Hi,
The list of cost centers in which the activity type is planned is given in KL02 under planning data. In order to add a new cost center to this, you need to enter the activity type in transaction KP26 for a particular year.
Goto transaction KP26
Give version - 0
from period 1 to 12
year - 2011
cost center - mention the cost center
Activity type - mention activity type
goto overview screen F5 and add the plan price for the activity in the cost center. This step will automatically add new row in the activity type control data.
Hope this helps.
Thanks,
Ram

Add New Node - Adobe Director Microsoft Treeview Control 6.0 xtra?

Similar Messages

Maybe you are looking for