Add new Office 365 to Azure after removing existing Office 365

Hi All,
A little convoluted, but I am struggling here.
First, some history.
I created an initial Office 365 account (via Telstra). The tenant domain for this is initialO365.onmicrosoft.com. I added a custom domain my-domain.com.
Sometime later, I created an Azure Subscription. Access to the Azure subscription was via my Microsoft Account.
Via support, I had the Office 365 my-domain.com associated with (I guess, via the Active Directory Directory) the Azure Subscription.
The end result was that I was able to logon to both Office 365 and Azure via the my-domain.com domain.
All was well.
Recently...
Due to some limitations with Office 365 via Telstra, I signed up for a new Office 365 account directly with Microsoft. The tenant for this domain is newO365.onmicrosoft.com.
I manually migrated the mailboxes between Office 365 accounts, and I also moved the domain from the old Office 365 to the new Office 365.
In terms of the new Office 365, all is well. I can logon via my-domain.com without issue.
What I now want to do is remove the association of the old Office 365 account from Azure, and add the new Office 365 account.
The end result will be that the old Office 365 account (initialO365.onmicrosoft.com) is cancelled and deleted, and I am then able to logon to Azure and the new Office 365 via my-domain.com.
I simply cannot get this to happen
I've tried to just add the my-domain.com domain to the existing directory in Azure (I've added the TXT record to the domain) but when I verify I get the following error:
Could not verify this domain because it was previously configured for your tenant or for another tenant.
I think I need to add a new Directory linked to the Office 365 tenant, but I am unable to do this (anytime I go to add a new Directory, I DO NOT get the option to select an existing one).
I do have a current support ticket, but it's taken over a week now and I'm not really getting far - I don't believe that they understand what I want to do.
My previous experience with getting this done lead me to believe that this was a simple-ish type of exercise, but I am stuck.
Any ideas?

Hi Brendan,
Thanks for posting here!
1. My-domain.com is still associated with initialO365.omicrosoft.com. You would like to add this domain with with newO365.onmicrosoft.com.
A1: First logon to old tenant "initialO365.onmicrosoft.com" and remove any association for "my-domain.com" from any objects (users/groups/applications) and then remove the domain "my-domain.com" from the directory. Once you
remove it, you will be allowed to add it back to the second tenant "newO365.onmicrosoft.com" after verifying the same using a TXT entry.
2. You would like to link the Azure Subscription to the new AAD tenant newO365.onmicrosoft.com
A2: First add the MSA to Newo365.onmicrosoft.com as a Global Admin (GA). Then under Settings on Azure Management Portal, click edit directory and select the new directory to link the Azure subscription to. Add GA for newo365.onmicrosoft.com as a co-admin
on the Subscription before they attempt to login.
Hope this answers your query.
Best Regards,
Sadiqh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful.

Similar Messages

Cannot add new songs in iTunes 9 after switching to media organization

Hey all, I'm using iTunes 9 and can't seem to add any new mp3s to my library. I've always had iTunes manage my library files and it keeps the mp3s in the default location (~/iTunes/iTunes Music). When I try to add mp3s, I see the error:
'Attempting to copy to the disk "" failed. The required folder cannot be found.'
I can still listen to all of my other music and my iTunes library folder is still intact. I just can't seem to get rid of this problem... I checked the permissions on all the folders and it's all kosher. I even tried rebuilding my iTunes library but still no dice.
The only change I made recently was to use the 'Upgrade to iTunes media organization' feature so that I could use the 'automatically add to itunes' folder. Does anybody have any guesses why that might trigger the error I'm getting?
Thanks!
David

After much fiddling, I discovered that this was caused by an alias inside my iTunes Music folder called “Music,” which simply linked back to the iTunes Music folder itself. This must have been causing iTunes to not be able to find the correct place to put its files. Simply removing this alias fixed the problem for me.

Re: Need Help! Dell poweredge T630 cannot reboot after trying to add new memory

It fail to initialize the iDRAC

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

What errors are you seeing on the screen?

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Change value of a control in a list item new or edit form depending on the page level view Add New Item being clicked.

I have a list which has a underlying infopath form for insert and edit a record.
The list has various views spread across different pages .
Now depending on different pages "New Item", a value for the form will have a corresponding value.
If there is a single line of text control in the list, and depending ona page name, the value for the single line text should be autofilled when Add new item is clicked.
How do i achieve that?
Thanks...

Hi,
According to your description, there are several list views in your list, there is a textbox control which holds the “Single Line of Text” type of data in your custom
form. When users click the “Add new item” button in one of the existing list views, you want the textbox control in the custom form to be populated automatically.
By default, when user clicks the “Add new item” button in a list view, the URL of the custom form page will contain the name of that list view page, thus, a workaround
which requires custom code can be like this:
After the form page loaded, we can extract the name of the list view page from the URL, then populate it into the textbox control immediately. This can be achieved
using jQuery.
About how to
get URL parameters of current page using jQuery:
http://www.jquerybyexample.net/2012/06/get-url-parameters-using-jquery.html
About
adding jQuery into InfoPath form:
http://riteshudupak.blogspot.com/2010/09/add-jquery-to-browser-enabled-infopath.html
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
Sendil

I got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE

How to remove Emoji keyboard from Add New Keyboard?

I already remove the App ... but the keyboard still work and some symbol stay together .. they change into faces .. dose anyone know how to completely remove this keyboard??? remove it from Add New Keyboard...

I think you are missing the point here. There is no known problem with the keyboard and it's functionality on the iPhone. You do not need to remove the keyboard to fix it. I have it installed and use it, it does not make symols appear when using other English keyboards. If you are seeing symbols entered unintentionally there is a problem with your iPhone's software. To see symbols you must add the Emoji keyboard to the keyboard list. Even then you must select this keyboard when typing a message and physically select the icon you want. It may be possible if you have a different keyboard selected, other than US English, that has some built in short cuts for symbol. The US English keyboard does not.
If you jailbroke and modified the iPhone's software in any way it may have messed up the keyboards functionality. I suppose any app you installed to enhance keyboard function may have effect it, but I don't believe Apple would allow it intentionally. Any chat app you use may come with it's own keyboard, changing the system keyboards will probably not fix them. Restore will fix any software issues the iPhone may have although if caused by an app it may come back when it is installed. Restore will erase media files which are not included in the iPhone backup files.
Discussing jailbreak procedures of iPhones here is prohibited and I do not recommend it to fix any issue. I only mention it since some people have problems with iPod/iPhones after they have jailbroke them but fail to mention it in their initial post. It gets futile trying to help someone with a very rare issue such as this and after many attempts to fix it you are told the iPhone is jailbroke which caused the problem.
Again the best fix here is to Restore it back to a clean iOS install using a back up. If it still does it Restore it as new and add apps till you see the problem appear.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

Export to Excel format changed after update to new Office

Post Author: Ceraq
CA Forum: Exporting
I am using the XL export format as an intermediate step to some complex calculations and ties that are not supported in my legacy system. To get what I want I simply used a CR XI report to create a mid way data file and then used a second report to crunch the final numbers from the data file. Its a long painful story as to exactly why I have to do it this way... not my choice.
Prior to the update when I exported more than ~65k lines to an XL format they remained in one sheet. So the second report would grab all the data and go... Now, after the update of office, the report gets split into seperate sheets each of ~65k records long and the second report sees each sheet as a seperate data table! I'm pushing over 1.25 million records into less than 400k in the mid data file so I'm getting about 7 sheets instead of the original 1.
I have a lot of work and time invested in this method so I would like to fix it so it still works in the previous manner... I have tried to export to a different format, but it seems that CR XI cannot export to a format that it can also read in... at least that I have found and not without creating a whole new DB for it to export into (Access). I cannot unroll the new office either as it is already enterprise wide...
Reomendations? Suggestions? Should I simply go get a few cases of Dr. Pepper and tell my wife I wont be home this week and re write everything (no plan on how I'd do that either...)?
Best regards,
Michael

Hi Debbei
I think u have to use microsoft office 2003
Regards Reeha

Hi, My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC

Hi,
My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC that's missing the photos.
When I open the iCloud control panel, I cannot turn on the photos. That option is ghosted. I'm running on Windows 7 with iCloud 3.0. Any ideas on how I can fix this? All help is appreciated! Thanks!

Hi Kevinmvb,
Welcome to the Support Communities!
The article below may be able to help you with this. It sounds like you may have moved your photos out of the Uploads folder where they need to reside.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Cheers,
- Judy

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

After update, Contacts does not allow me to edit or add new. What am i missing?

After completeing iOS 5 update, I can not access Contacts. Can't add new, can't edit. How do i fix this?

If you have a gmail, yahoo, or even iCloud, etc. account go into settings>mail, contacts and make sure you're not syncing through yahoo for example.. Turn that off, if that still doesn't work delete the yahoo account and simply set up the account again..will add the + & edit functions again..

How to remove songs/albums from Iphone 5 S and itunes library inorder to add new songs

I have an Iphone 5, 7.1.2 model. I have been attempting to add new songs onto my phone but do not have any available space. Although I have deleted and removed apps and other space eating products from my phone, I still do not have enough space to add the new songs that I would like to include on my phone. The final option would be for me to remove some songs from my phone that I no longer listen to. Problem is, I can't seem to find a way or any direction on just how to do that. Wonder if anyone has successfully removed songs from their phone and/or library as a way to free up space to replace them with new songs?

Hello there, LeowenRich.
The following Knowledge Base articles review how to sync and manage content, respectively, on your iOS device. This will allow you to choose what content you want on your iPhone:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
and
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Add new Office 365 to Azure after removing existing Office 365

Similar Messages

Maybe you are looking for