Add new Oracle VM 3.0.2 server & network, SAN configuration

Hi,
I'm installing an Oracle VM 3.0.2 cluster with 4 Oracle VM servers.
The cluster has been installed with 2 servers, the network has been configured (3 VM Network and 1 admin network).
The storage has been configured, some VM has been created.
And live migration has been realized.
Perfect
When i'm connecting on the server, I can see the network configuration on linux (bridge, vlan, etc...), storage (pool and repository,)
Now, i have two other servers and i'm installing one with Oracle VM Server 3.0.2.
The installation is OK, i discovered the server in oracle VM Manager without problem.
When I'm adding the servers in the pool, the operation is successfull, and now I have a pool with 4 servers.
In Oracle VM Manager, i can see these new servers in Network, VLAN Groups tabs, Storage Arrays.
But, on the server, the network configuration is not configured, I don't have the configuration like other server.
No bridge, no new vlan.
And the ocfs2 repository filesystem is not mounted.
And I don't know why
Do you have any idea ?

We fixed a bug in 3.0.3 where the networks are not created on the new server correctly. 3.0.3 is busy being uploaded to the Oracle Software Delivery Cloud, so it should be available in a few days. In 3.0.3 we automatically configure the network on-the-fly as guests that require each network component are started.I have upgrade to 3.0.3 :
- the Oracle VM Manager
- these 2 servers already in the pool
- and the new server
I add it in the pool, and the network are not configured.
I make an new install from scratch of the new server, and same problem.
I create a new VLAN segment in the pool, and this segment is configured on all servers, including the new one.
I copied the network configuration from a active server on the new server
I rediscover the server
Ok, the 3.0.3 seem to be available on Oracle Delivery, i will download it as soon as possible.
The repository needs to be presented to the new server that's joined the pool. Can you explain me ?I find the present/unpresent repository on the repository tab, it's ok now.
Now I can migrate a VM to the new server, all works fine.
I'm waiting the last server to be available (san connection problem).
I will see if the problem is the same.
Best regards

Similar Messages

How add new Oracle Report server

Dear All
I need to add new Oracle Report Server on my oracle application server beside server exists
it is applicable and how?
also i need to change database using by this report server
i'm using oracle application server 10.1.2.0.2
on windows server 2008
Edited by: Hshihadah on Jan 19, 2011 12:49 AM

hi,
Go to ORACLE_HOME/bin
Open AddNewServerterget.sh ---------for unix
and AddNewServerterget.bat ---------for windows
$./AddNewServertarget.sh <reportserver name>
$dcmctl updateconfig
$dcmctl resyncInstance
$opmnctl status
Thanks,
Santosh
Edited by: user12045405 on Jan 19, 2011 1:50 AM

How to install a new oracle 9i in the same server where a 8i is installed

Hello and sorry for been an inexperience dba.
Now I need to install 9i oracle version in the same server (solaris os-5.9) where is previously installed a 8i. I'm reading the installation guide and I know that I have to make two different oracle home, and then two different owners .
My problem is when I've seen the kernel parameters and their permissions and of course all of them have the owner the old oracle user.
Do you know if I have to change some of this parameters?
How to do that, and where can I find some guide to follow ?
thanks in advance

and then two different owners .Not necessarily, you can use the same OS user, of course on a different Oracle Home.
where can I find some guide to follow ?http://download-uk.oracle.com/docs/html/A96167_01/pre.htm#sthref106
http://download-uk.oracle.com/docs/html/A96167_01/pre.htm#CHDCEHBG

Automatically add new SQL data sources on secondary server

Hi there.. I have found an issue that I cannot resolve.
We have two DPM servers set up to be secondary servers for each other.. it has worked well for months and I was very happy with the setup.
What I had not realized was if a new SQL database was created and was picked up by the local DPM server, the secondary server did not pick up the new data source.
Is there a way to get a secondary server to refresh the list of data sources it should be backing up without having to manually updating the Protection Group once a week.
Many thanks
Chris
Chris

Hi,
Have you attempted the following? From the secondary DPM Server modify the protection group in question.
From the select group members step expand the needed SQL server.
Select the SQL instance (ensure the check box is checked off next to the SQL instance) then right click.
Now click on Turn on auto protection (Figure 1) to enable.
Figure 1:Enabling SQL auto protection from Secondary DPM Server.
Figure 2:After SQL auto protection is enabled.
Also the below may assist.
https://technet.microsoft.com/en-us/library/hh758042.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

Creating New Oracle Database on Windows 2000 server

These are the steps I am going to take. Are these correct?
1.) Set the Environment Variable. Do you need to use Oradim or is "SET ORACLE_SID=EGWASDEV" OK?
2.) Create a INIT.ORA file placed in a separate directory from EGOVDB.
3.) Create DATABASE Script. (See Attached)
4.) Create Tablespace Script. (See Attached)
5.) svrmgr1
6.) Connect Internal
7.) startup nomount pfile="E:\oracle\admin\egwasdev\pfile\initegwasdb.ora"
8.) Run CREATE DATABASE Script
9.) Connect Internal
10.) Run Tablespace script
11.) Run E:\oracle\ora81\Rdbms\admin\catalog.sql
12.) Run E:\oracle\ora81\Rdbms\admin\catproc.sql
13.) Change Password for SYS
14.) Change Password for System.
15.) Modify Listener
16.) Modify Tnsnames
17.) Setup Dbstart (to automate)

When I connect internal I get a TNS:protocol adapter error. If I reference the SID of the existing database then I will be logged into that database. I thought I shouldn't be connected to any database in order to.....
startup nomount pfile="E:\oracle\admin\egwasdev\pfile\initegwasdb.ora"
How should I connect and what do I do to avoid the TNS errror?

I want to add new mac to existing wired and wireless network

I have a imac 400mz connected (ethernet) to a network - CABLE Modem to Balkin 5.4 G Wire/Wireless router. I have 2 wintel machines hard wired, plus 1 via Motorola PCIMA wireless. I want to add either of the following new Apple products -
mini mac or imac 17 - both have Airport extereme installed. OK how do I get the new apple on to the existing network.
Please advise

On the Mac - click on the Airport menu icon located near the right side of the MacOS menu bar at the top of the screen. A list of all in-range wireless networks will appear. Click on the name of your wireless network to connnect to it. If your wireless network is protected by WEP or WPA security, the Mac will prompt you to enter the key. That's it!

Add new Alerts to system monitoring

Hi,
My Name is Tomas Piqueres and I'm working with Solution Manager. I'm monitoring one of my systems and I'm setting up some alerts.
The problem is when I'm trying to add some alerts that are outside the last node (the corresponding with the server name).
For example, I want to activate an alert to see the free disk space in database, at satellite system I select the alert and set properties. Here I found the full name of the properties:
<SID>\Microsoft SQL Server\Space management\DB:PRO\N:/MSSQL/PRODATA1/PRODATA1.mdf\PRODATA1 Free Disk Space
With the full path, I go to my Solution Manager> transaction DSWP>Select my solution>Operation setup>Setup System Monitoring
Here I only can add new User Defined Alerts for my server and my SAP System. If I select User Defined Alerts for my database I get the error No properties can be maintained for the selected node (MTE).
If I try to add an alert for the server, the path for all of the alerts possible is <SID>\<server name>\.....
So I can't add the alert I've got from satellite system.
Is there any way to add more alerts?
Please, could you help me?
Thanks and regards,
Tomas.
Edited by: Tomas Piqueres on Mar 27, 2009 2:01 PM

Hi Nesimi,
That was exactly what I did but it didn't work.
I've solved it changing the CCMS context.
Thanks,
Tomas.

ORA-01034: ORACLE not available with oracle 10.2 in Ubuntu server 11.10

Hi all,
I have this error message with my new installed oracle-xe 10g (10.2):
luc@cuba:~$ sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:25:43 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Or if I try with SYSDBA:
luc@cuba:~$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:34:34 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
If a did the status command:
luc@cuba:~$ sudo /etc/init.d/oracle-xe status
[sudo] password for luc:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-JAN-2012 23:29:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 09-JAN-2012 22:44:12
Uptime 0 days 0 hr. 44 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cuba)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
What I did wrong?
Regards,

user13538830 wrote:
Hi all,
I have this error message with my new installed oracle-xe 10g (10.2):
luc@cuba:~$ sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:25:43 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Or if I try with SYSDBA:
luc@cuba:~$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 9 23:34:34 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
If a did the status command:
luc@cuba:~$ sudo /etc/init.d/oracle-xe status
[sudo] password for luc:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-JAN-2012 23:29:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 09-JAN-2012 22:44:12
Uptime 0 days 0 hr. 44 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cuba)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
What I did wrong?First, you installed on an unsupported OS.
Second, you apparently did not Read The Fine Manual, Installation Guide
post results from following OS command
env | sort

Add new printer driver

Hi,
We need to add new printer driver in SAP application server , how to add new driver?
Actually we have some graphics and fonts which is not supporing SAPWIN .we have different printers ,these printers I could not see in SPAD .
I foung many notes which did not help me . Can you please suggest step by step how to add new driver.
Please dont suggest help.sap.com , It will not help me .
- Lisa

First, you need to download the sap driver of your printer model from the manufacturers websites, usually the file has an extension *.pri this is different from windows drivers. Next, save the file to a any directory (e.g. c:\temp) then logon to your System. In TCODE spad > goto Utilities > For Device types > select Import. A window will be opened > tick Device Type >
Object name: type the exact filename of your downloaded file (xxx.pri) to be imported
Mode: IMPORT
F8/Execute
Select the Local Object button and browse to the location of downloaded file and select open, this will start the import process. When import process is complete a pop message will be shown "Object successfully imported"
Note: For alternative drivers try to use ZSAPWIN.
Hope this helps.
Braille

Need help setting up DB Link from my Oracle 11g XE to SQL Server.

Hi,
I'm trying to create a DB Link from my Oracle 11g Express Edition in a Windows XP machine to an SQL Server. Here are the steps I've done so far.
1. Created and setup an ODBC Connection for the SQL Server DB. Named it SQLSERVER. Windows Authenticated.
2. Modified listener.ora. See below.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = SQLSERVER)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)3. Modified tnsnames.ora. See below.
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSERVER =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT=1521))
    (CONNECT_DATA =
      (SID = SQLSERVER)
(HS = OK)
)4. Copied C:\oraclexe\app\oracle\product\11.2.0\server\hs\admin\initdg4odbc.ora to C:\oraclexe\app\oracle\product\11.2.0\server\hs\admin\initSQLSERVER.ora and modified it. See below.
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = SQLSERVER
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>5. Restarted listener.
C:\>lsnrctl stop
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2012 11:33
:51
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2012 11:33
:54
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\11.2.0\server\network\ad
min\listener.ora
Log messages written to C:\oraclexe\app\oracle\diag\tnslsnr\PHAILORTD000012\list
ener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date                18-SEP-2012 11:33:57
Uptime                    0 days 0 hr. 0 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\PHAILORTD000012\li
stener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLSERVER" has 1 instance(s).
Instance "SQLSERVER", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully6. Created database link using the following command.
create database link sqlserver using 'SQLSERVER';7. Test using
select * from "dbo.mytable"@sqlserver;
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
select * from dbo.mytable@sqlserver;
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
select * from mytable@sqlserver;
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVERI followed the steps provided in this link but not sure where I went wrong. Can someone help me.
http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm
Thanks,
Allen

Here's more information on the machines.
Machine where the Oracle Database 11g Express Edition: IP Address is 10.162.128.67
Machine where the SQL Server database: IP Address is 142.120.51.30.
I've modified the tnsnames.ora to the following:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.162.128.67)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSERVER =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 142.120.51.30)(PORT=1433))
    (CONNECT_DATA =
      (SID = SQLSERVER)
(HS = OK)
)But now I'm getting the following error:
C:\>tnsping sqlserver
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2
012 14:52:59
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 142.120.51.30)(PORT=1434))) (CONNECT_DATA = (SID = SQLSERVER)) (HS = OK)
TNS-12541: TNS:no listener
C:\>Regards,
Allen

Oracle XE connection to SQL Server 2000

Hello everybody,
I need to make a connection to a table in SQL Server 2000. I am using Oracle XE with Apex 3.0.1.
SQL and XE are on the same server(windows server 2003).
I need to make an application that uses some data of the SQL Server and for the rest it uses data from Oracle XE.
How can I make this connection to SQL Server from Oracle XE? Some suggestion where I should start, would be great.
It would be great if the Apex developers would not notice that the data is retrieved from SQL Server, is this possible?
For 10g there is a gateway for this I believe, but not for XE.
Thank you for your time!

Thanks, after searching some information about Heterogeneous Services.
I came accross this site http://www.databasejournal.com/features/oracle/article.php/10893_3442661_1
I followed the instructions but I get the following error:
SQL> create database link sqlxe connect to testuser identified by testuser USING
'SQLXE';
Database link created.
SQL> desc employess@sqlxe
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLXE
I searched for the error ORA-28545 and followed some suggestions but I cannot find a solution.
Here some information that might be usefull (sqlxe is the connectionname):
C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\Listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SQLXE)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
LISTENERSQLXE =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
DEFAULT_SERVICE_LISTENER = (XE)
C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = win2003)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
SQLXE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522))
(CONNECT_DATA =
(SID=SQLXE)
(HS=OK)
lsnrctl start listenersqlxe
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 08-NOV-2007 10:46
:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\ad
min\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log
\listenersqlxe.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
STATUS of the LISTENER
Alias listenersqlxe
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 08-NOV-2007 10:46:34
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listenersqlxe.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
The listener supports no services
The command completed successfully
lsnrctl status listenersqlxe
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 08-NOV-2007 10:47
:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
STATUS of the LISTENER
Alias listenersqlxe
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 08-NOV-2007 10:46:34
Uptime 0 days 0 hr. 0 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listenersqlxe.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
The listener supports no services
The command completed successfully
Thanks in advance

Oracle XE installation in Windows Server 2008

Hi all,
I need to install the Oracle XE version on a Windows Server 2008 but I'm not beeing successfully... I already reinstalled it 3 times, tried all solutions I could find all over the internet but still it doesn't work so I was hopping that someone out there could help me.
This is my current configuration:
===========
LISTENER.ORA:
===========
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = VALKYRIE.rhdevelop.local)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
===========
SQLNET.ORA:
===========
SQLNET.AUTHENTICATION_SERVICES = (NONE)
===========
TNSNAMES.ORA:
===========
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = VALKYRIE.rhdevelop.local)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
===========
result of "lsnrctl services" command:
===========
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-NOV-2010 00:59:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
===========
result of "tnsping xe" command:
===========
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-NOV-2010 01:00:29
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = VALKYRIE.rhdevelop.local)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NA
ME = XE)))
OK (10 msec)
When I try to access it thru the web (http://127.0.0.1:8081/apex) it gives a unable to connect error page.
When I try to connect to sqlplus using "sqlplus / as sysdba" it says:
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Nov 4 01:03:45 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
I don't know what else to do and any hint would be very much appreciated.
Thank you!

C:\>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
CG_BOOST_ROOT=C:\Program Files (x86)\Embarcadero\RAD Studio\7.0\include\boost_1_39
CLIENTNAME=ROSS_01-PC
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=VALKYRIE
ComSpec=C:\Windows\system32\cmd.exe
DXVCL=C:\Dev\Vcl\Developer Express.VCL
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
lib=C:\Program Files\SQLXML 4.0\bin\
local=LISTENER
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\VALKYRIE
NLS_LANG=American_America.we8iso8859p15
NUMBER_OF_PROCESSORS=8
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
ORACLE_SID=xe
OS=Windows_NT
Path=C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Program Files (x86)\Embarcadero\RAD Studio\7.0\bin;C:\Users\allaccess\Documents\RAD Studio\7.0\Bpl;C:\W
indows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft\Exchange Server\bin;C:\Program Files\
Microsoft\Exchange Server\Scripts;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;c:\Progr
am Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;c:
\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\M
icrosoft SQL Server\90\DTS\Binn\;C:\Dev\Vcl\Developer Express.VCL\Library\Delphi14;C:\Program Files (x86)\Java\jre6\bin\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 26 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1a05
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
PUBLIC=C:\Users\Public
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Administrator\AppData\Local\Temp\2
TMP=C:\Users\Administrator\AppData\Local\Temp\2
USERDNSDOMAIN=RHDEVELOP.LOCAL
USERDOMAIN=RHDEVELOP
USERNAME=administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows

I have working Netgear network. Want to add new Time Capsule and run 2nd network for new apple TV and Imac, and keep the netgear network for my PC and Canon printer.

I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T. I have an IMac on order but don't have it here yet.
My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
Where do I start?
Which device connects to my modem first, the TC2 or the Netgear?
Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
Thanks.

It is pretty simple..
Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
v6 will be as
With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard.

Can not add new server

Hi,
I install Oracle Workshop for WebLogic 10.3 on Windows Vista and I create new remote server without problem but I can not see server state.
So I delete server and try add new one. Unfortunately when new server popup window is open and I click next (to Specify a WebLogic domain directory/Specify a remote host name) I can not type connection data because all fields but Re-enter password are disabled for remote server type.
Next I try reinstall Oracle Workshop and this takes no effect.
Thanks for answer.
Peter

In new installation BEA2 I create new domain and start it. After configuring WebLogic Runtime Oracle WebLogic Server connection start to live.
Same procedure with old installation doesn't work.

500 Internal Server Error when trying to add new members

My Workspace is working correctly but when I try to add new users, I get the following error:
500 Internal Server Error
Thanks
Michel C.

Hello Michel,
How are you processing to add new members?
You should be manager of your workspace and
- go to http://beehiveonline.oracle.com
- click on buttom "Create Group or Add New Members"
- Choose your group
- CLick on the link "Add new member"
regards
Fred

Add new Oracle VM 3.0.2 server & network, SAN configuration

Similar Messages

Maybe you are looking for