Add new partner function as a characteristic in structure PAPARTNER

Hello experts,
I have create 2 new partner functions (Z) in SD and have assinged in customer master. I need these 2 custom partner functions to be transfered to CO-PA during billing. I have followed OSS Notes 12682, 36557 and 36406.
I Have define 2 new domain/data elements in the new partner functions (ZFPZ1 and ZFPZ3) and have assign it in structure MCPARTUSR to the new partner fields (PPARTZ1 and PPARTZ3).
However when trying to add this new fields to the profitability analysis data structures using transaction KEA0, from the structure PAPARTNER, the new partner fields do not appear.
Can anyone tell me what is missing?
Best regards,
HP.

HI,
normally it should work fine if you followed SAPNET note 36557 + corresponding. If it is freight cost where the problem occurs, see SAPNET note 411032. See also 93658, maybe thats helpful.
Best regards, Christian

Similar Messages

  • New Partner Function in CRM (Solution Manager Service Desk)

    Hi CRM Gurus!,
      Even if this problem is present in my Solution Manager Service Desk I'm creating this thread here in CRM Forum because I thin'k I need the experience of one CRM Expert. Í´ve created this question in Solution Manager Forum also but I hadn´t solved my problem yet.
    We add the partner function called "Additional Partner", but I don't know why in the tab "Partners" in the CRM transaction we want to add a new partner but in the partners combo the new one does not appear in the list.
    The procedure that I did was: I created a new business partner function and I added this new function to my partner determination procedure, then in SPRO: "Define Partner Determination Procedures" -> I set the option "Only Functions Assigned in Procedure". 
    These are the values. fro my new function:
    Function: ZSLFN004
    Text: Additional Processor
    Abbrev.: ZAMS
    Function Cat.: 0008 Person Responsible
    Usage: CRM Customer Relationship Managem.
    Relatshp Cat: CRMH06 Is Responsible BP For
    The partner functions in my procedure are:
    00000001 Sold-To Party (CRM)
    00000046 Approved by (CRM)
    SLFN0001 System Administrator (CRM)
    SLFN0002 Reported by (CRM)
    SLFN0003 Support Team (CRM)
    SLFN0004 Message Processor (CRM)
    ZSLFN004 Additional Processor (CRM)
    But in the transactions when I try to add a new partner in the partners tab only the follow functions appears in the combo:
    00000001 Sold-To Party (CRM)
    00000046 Approved by (CRM)
    SLFN0001 System Administrator (CRM)
    SLFN0002 Reported by (CRM)
    SLFN0003 Support Team (CRM)
    SLFN0004 Message Processor (CRM)
    I don't know why my ZSLFN004 is not listed in the combo.
    By the way, my function was created as a copy of SLFN0004.
    Any help would be appreciated.
    Regards
    Gustavo Balboa

    Hi Vishant,
      Thanks for your answer, but some one in the Solution Manager forum gave me the answer few minutes ago :). The problem was that in some transaction types (I don't know wich ones or if it aplies to all) the category 0008 - Person Responsible can only appear once, my partner function was a copy of the function SLFN0004 - Message Processor and that function is defined with the category 0008, so I had 2 partner functions defined in the category 0008.
    To solve the problem I just adjust my Z function and put the category 0016 - Service Team and let the relationship empty. Then the partner function is now showing in the combo at partners tab.
    Again, thanks anyway for the time that you take to answer my question.
    Regards
    Gustavo Balboa

  • Creation of new partner function for VENDOR

    Hi,
    I've a requirement to create some Partner functions for vendors while creation of vendor. Some Partner functions are available by default and some we need to add. but while doing a BDC we are not able to find how many of them are available or where to put the new Partner function?
    Please let me know, if there is any BAPI availble..
    Regards,
    Anupam

    Try below LSMW batch input method its very esay to upload data
    Object               0040   Vendor master
    Method               0001   Standard
    Program Name         RFBIKR00
    Program Type         B   Batch Input

  • Adding a new partner function in va01 has to differ in item wise

    Hi all
    here by adding a new partner function by item level in va01
    i hav a z partner table , that has some values , each values differ from item level
    for eg : item 1 (posnr) 10 , has a new partner called buyers1
    posnr 20 has buyers 2
    what i am facing probs is , i cannot append into table xvbpa (using a program mv45afzz) & form save_docu_prepare.
    xvbpa table item is not storing
    partne rwill come default from the customization , but my partner will be add depends on item / material .
    i have tested a scenario for eg . when i creating a orders , as soon as entered a dealer , the default parner will be setting , then i entered manually a new partner , then it is reflecting in a table with item
    customization partner doesn't hve a  item , where as while creating when i put manually it is reflecting in item level .
    and 1 more things , when i try to append it also , its is reflecting to all item in orders
    tel me how to refresh the new partner item wise , that also O.K

    nO ANSWER FOR THE QUES. NEED TO RAISE MORE QUES. SO ONLY I AM CLOSING

  • VA01 - Add new partner automatically

    Hi all,
    in VA01, for every item I need to add a new partner function automatically, depending of a certain condition type.
    Does anybody tell me the correct user exit I have to use ? 
    Best regards

    Hi
    u need to set the partner for agent in the schema partner for sales document in your cutomizing, in the schema u need to assign X,Y or Z as source: that means the partener will be determined by a user-exit.
    Then u have to implement the user-exit EXIT_SAPLV09A_003
    Max

  • BAPI to add additional partner functions in customer master(KNA1)

    Hello All,
    I wanted to add additional partner functions(2) to the list of partner functions which gets added by default while creating a customer. I am currently using BAPI_CUSTOMER_CREATEDATA1 to create the customer master. There i do not find any option to add my partner functions.
    NOTE: I need to update KUNN2 field as well while adding my partner functions.
    Could anyone please help here?
    Regards,
    Jay

    Hi,
    No you should not feel confident with SD_CUSTOMER_MAINTAIN_ALL.
    It is used for only one very special case. The maintenance of consumer. And this should only be true from the transaction itself.
    There exists other cases, one of the oldest one is the BAPI_CUSTOMER_CREATEFROMDATA1. But is is exclusively reserved for SAP Online store.
    Despite the fact CMD_EI_API is quite difficult to use, it has the main benefit that is it supported if being triggered directly.
    For the maintenance of customers, there is NO BAPI and NO direct function module.
    There are some functions modules like the one above where the name is looking nice. But these should not be used.
    The only valid solutions are :
    Below ECC 2005 (6.00), the only solution was batch input and DEBMAS idocs. See note 384462
    Starting with ECC 2005 (6.00) and above: a synchronisation tool has been introduce. See class CMD_EI_API and VMD_EI_API
    Hope this helps
    BR
    Alain

  • A new partner function is been defined for a particular customer in r/3?

    Hi All,
    There is a new partner functions been defined for a customer apart from soldto,shipto,payer,billtoparty partner functions.
    The new partner functions is Sales head.
    And how to i bring the sales head information from the customer master from r/3 to bw?
    Do i need to create a new zobject nor enhance the customer master ? nor simply create an sales head object in bw and define the characteristics as Reference characteristics??
    pls help me !!
    Thanks
    Pooja

    Hi,
    You should enhance the standard Data source 0customer_attr with that additional partner function (sales head) as per the proper logic and replicate the same . if it is 3.5 that same object( related to that field length and data type) same object can be added as attribute at info object level and do the transfer rules   and activate that and try to the load.
    Thanks & Regards,
    Sathish

  • How to define a new partner function?

    Dear experts!
    Thank you for your attention!
    we are using ECC6.0, I just want to ask how we can define or create a new partner function?
    Best regard!
    Tangdark

    Hi
    Tang
    Use Tcode  VOPA
    Partner function
    Specify an alphanumeric key which can have up to 2 characters and a description for a partner function.
    Partner type
    The partner type is an indicator which informs you of the type of partner, for example, partner type customer "KU".
    Currently, you cannot change the partner types in customizing. You canonly select the partner types that are included in the standard SAP R/3 System.
    Error group
    Using the error group, you assign an incompletion procedure to a partner function (see section "Incompletion log").
    Higher-level function
    For a partner function, you can specify the higher-level partner
    function. In this way, you can portray an existing dependency between the partner functions.
    Unique in customer master record
    If you characterize a partner function as unique, you can specify it only once in the customer master record.
    The sold-to party has to be unique in the customer master record whereas you may specify several contact persons.
    Customer hierarchy type
    In this field you can specify whether a partner function can be used for a customer hierarchy. Enter the customer hierarchy type permitted
    for the partner function. Refer to the section "Define hierarchy types
    and assign to account groups".
    Convert functions
    If you work with several languages in the sales and distribution
    system, you can carry out a language-dependent function conversion.
    This means you can display the internal key definition, for example, AG, WE, and so on, differently on the screen depending on the logon language of the user. For example, you can display the key CU as AG when logged on in German. (The conversion is necessary because the partner functions such as AG, WE are partially hardcoded in the programs.)
    Thx.
    Edited by: DWARKESH THAKKAR on Oct 28, 2008 7:16 AM

  • Need a user exit to add custom partner function in sales order @ item level

    Hi,
    Need a user exit to add custom partner function in sales order at item level. Goto --> Item --> Partner.
    Thanks,
    Thiyagi

    HI Leo
      To add a condition price for a condition type, this has to be assigned in the <b>pricing procedure</b>. For each condition type in a pricing procedure, we will have <b>access sequences</b>. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
       Naren is right to point out on the same.
      If you need to change the price for a particular condition which already exists, you can go by <b>pricing routines</b>. Go through transaction <b>VOFM</b> for the same. 
       I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
    Kind Regards
    Eswar

  • Smartview 11.1.2.1 toolbar-Add new/modify functionality without VBA

    Please help me with below questions
    1. Is it possible to add new custom functionality (like add new button/modify the existing functionality) in Smart view 11.1.2.1 toolbar or anywhere in Smart view main menu without using VBA?
    2. Can above mentioned changes brought on the server side, which would reflect on client; in other words, maintain code on server side; no need of installation.
    3. Is JAVA code supported by Smartview 11.1.2.1 as VBA; if yes then how it can be achieved?
    Product version:
    11.1.2.1.000

    Hi Anku,
    1. Is it possible to add new custom functionality (like add new button/modify the existing functionality) in Smart view 11.1.2.1 toolbar or anywhere in Smart view main menu without using VBA?With a little research, you can expose the Smartview menus and functionality using a .net project in Visual Studio.
    2. Can above mentioned changes brought on the server side, which would reflect on client; in other words, maintain code on server side; no need of installation.The Smartview client UI elements are derived from local msoffice APIs, and not managed at the server. The server is a web service and the only thing it knows is how to dispatch requests in the form of XML to the appropriate API (E.g. Essbase) and return the results to the client as an xml stream.
    3. Is JAVA code supported by Smartview 11.1.2.1 as VBA; if yes then how it can be achieved?No.
    Regards,
    Robb Salzmann

  • New partner functions for datasource 0CRM_SRV_IBASE_ATTR

    Hello,
    in note 874267 is described how to implemention new partner function in datasource 0CRM_SRV_IBASE_ATTR. But i doesnt know how get the structure iba_partner in the badi. Is there are function modul simulare like CRM_BADI_GET_BDOC.
    Regards
    Sven Sende

    Hi Pramod,
    SMQ1 will only show an entry, when there are available data for the delta queue, i.e. someone has made a change or added new data.So checking RSA7 and SMQ1 will give the same result, if RSA7 shows more than 0 entries.
    The problem may be the init. What init did you do: an init with data, or an init without data, or an init with a filter. Experience with our CRM system tells me, best way to initialize any CRM data is to do a full data init (without filter) or a init without data (without filter). I wonder about the FULL load you mentioned ? When did you do it ?
    Kind regards,
    Jürgen

  • How to add a new partner function as a characteristics in COPA

    Hi There,
    Can you help please.
    I am trying to add an existing SD partner function called End Customer as a characteristic in CO-PA. End Customer is not defined in the CO-PA PAPARTNER structure.
    1 Sold To Party can have more than 1 End Customers. In such cases, during sales order creation, users will be prompted to select the End Customers. I need to extract the End Customer information into CO-PA as what is being specified on the sales order.
    Appreciate if anyone can shed some light on this..
    Many thanks in advance...
    Cheers
    HW.

    Hi Warwick,
    I've had a look at the SAP.Help Library - i am ok with the steps of adding the characteristics into COPA, no problems on this step.
    My question was around adding a partner function into a PA structure - PAPARTNER. The End Customer is not defined in the PAPARTNER structure - hence, I cant easily create a new characteristic using the transfer from SAP table or derivation rules.
    I need to find a way to extract the End Customers from the sales document, add that into the PAPARTNER structure and then create a new characteristics referencing that table.
    I've been looking at OSS 32878, 36557 and 12682 - and am slightly confused.
    Has anyone tried this before?
    The system is ECC 6.0.
    Thanks
    Cheers
    HW

  • Creation of new partner function through /AFS/BAPI_SALESORD_CHANGE

    Hi all,
    Can anybody help me to create partner functions through the bapi /AFS/BAPI_SALESORD_CHANGE ??
    In the selection-screen we will pass the vbeln, PARVW and kunnr values ??
    Any kind of little help is very much appreciated.

    thats all you need to pass to change the partner type like bill to or ship to.
    You dont create partner functions from this bapi. This is to change the sales order and the details in sales order. Creating partner function comes under SPRO.
    Ask you sales functional people to create new partner function

  • How can I add customer partner function entries in LSMW?

    I am using SAP ECC 6.0 with best practices installed. I am able to create sold-to customers using the batch input program RFBIDE00. 
    When I try to add partner function entries using structure BKNVP, it appears that the partner ID stored in KTONR is not populating SAPMF02D screen 324 after it is entered on screen 2324. I receive a “Data is incomplete; check” error.  I could not find an SAP note or other solution to correct this problem. 
    While searching for a solution, I found a few recommendations to use the IDOC message DEBMAS to create the partners function entries instead of batch input.  When I try to use this approach, I am receiving an error “Deletion is not allowed: SP is mandatory function”.  I was trying to add an SH (WE Ship-To) at the time. I found a reference that explained that all partners were replaced when this IDOC message is used.  It further explained that this should work if all partner references were included in the message.  This approach did not work either. I still receive this error if I omit or include an SP (AG Sold-To) record.
    Does anyone have a solution to either problem or another approach?

    Hi
       You can use LSMW :-
    1) Create a project , sub project and an object.
    2) execute it from 1 st screen to enter the object.
    3) You will find proces steps.
    4) In Maintain Object Attributes  choose Program Name RFBIDE00.
    or I-DOC or the way you want the input to be.
    5) You can proceed from there following the instruction..

  • Modify and create new partner function in MM

    Hello to everybody = )
    Recently I was asked to copy from one cliente to another most of the customizing for the MM module. When I arrived to the PF step for vendors I had a couple of problems.
    First, some of  the standard Partner Functions were modified and some other were created. When I try to delete and then save the PF
    AP     Contact Person     AP
    TO
    PC     Contact Person     AP
    The systems tells my that the PC value is not valid in the V_TPAR table.
    How should I change this PF in order to continue with the customization steps.
    Regards.

    I just find our the answer to my question = )
    Regards!

Maybe you are looking for