Add new status values to "documentation tab" in solar02

HI,
I want to add new status values for the documentation tab in solar02.
can anyone tell me the process for the same?
thanks,
basis admin

Hi,
If you're reffering to the documents status you can define custom ones at:
Transaction SPRO
button "SAP Reference IMG"
    Navigate through:
-SAP Solution Manager Implementation Guide
-SAP Solution Manager
    -Cross-Scenario Settings
      -Document Management
        -Status for Documents
options:
*Define Status Values for Documents
*Assign Status Values for Read Authorization
*Define Document Status Schemes
*Assign Status Scheme to Documentation Type
Please read these Steps and you'll be able to configure these status.
Kind regards,
Fabricius

Similar Messages

How to add New status values in product

Hi,
In product master COMMPR01 presently system is shwoing only two vaues Blocked (ERROR), Blocked (Warning), even I have downaloded the sales staus from ECC to CRM using R3AS object 'DNL_CUST_PROD3' but on the screen system is not shwoing thos values.
How to add new values in staus field.
Regards,
zafar

Hi,
Refer these links
Re: GR for a production order
status profile
Regards,
Vishal

Add new fields in Additional data tab B in Inquiry,

HI,
I want to add additional new fields in inquiry on the addition tab -B, like
Architect Name
Contractor name
followed By
referenced by like this, and want to capture the report on these fields
plz guide
thanks in advace

Dear Rishi,
Please Don't post multiple threads for same issue(i.e Add new fields in Additional data tab B in Inquiry).
Try with these User Exits,
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

Add new fields incu stomer data tab ( transaction BP)

Hello,
I need to add three new fields in the standard transaction BP. I need the three new fields show in the customer data tab when you have introduced a determinated value in control tab before.
Is it possible?
Can you tell me the way?
Thanks

Hello,
I was changing the customer fields of transaction BP with transaction eewb.
I was working in a specific project (ZBUPA) as you can see in the following images. I don´t know what I've changed but now the icon of the enhancement of the project is like a red broken box (Errors occurred if you look for it at the legend), and the task has got a prohibit icon (Processed with Errors). Like this:
[[IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg]http://img329.imageshack.us/my.php?image=errorpp1.jpg][IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg | http://img329.imageshack.us/my.php?image=errorpp1.jpg]
I am very interested in recover the system to the initial state of the screen, like this image shows.
[[IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg]http://img329.imageshack.us/my.php?image=okzv3.jpg][IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg | http://img329.imageshack.us/my.php?image=okzv3.jpg]
Thanx!

Can we add new logical system in Entitlement tab in SAP Authentication.

Hi ,
We already Installed and configured sap integration kit and every thing works fine. My question is as of now we connected our sap BW Dev system to BOBJ but we would like to connect to BW Prod System to same BOBJ System. What are the steps we need to follow to do this.
Can we just add the new logical system in entitlement tab of sap authentication in BOBJ 3.1? and import the roles and login to BOBJ USING THE Newly added SYSTEM Credentials. Thanks in Advance.
Thanks,
SK.

Hi Ingo,
Thanks for the information.
Are there any specific steps you need to follow when you are adding one more system to sap authentication. can you please give the steps we need to follow to setup this in right way. Thanks in advance.
Is there any thing we need to configure on sap side other than sap logon ticket parametre. If you can please provide the steps it will be great. Thankyou very much In advance.
Thanks,
SK.
Edited by: Vallabhaneni SK on Jul 14, 2009 8:53 AM

Add new dropdown value in search criteria for Invoices

Hello,
I want to add one more value in Drop-Down box of the search criteria of invoices.
As on now there are 2 DropDown boxes
in Your Referance No
in Transaction No
(New)
in Order No (This will have search value as "Sales Order No")
Can anyone tell how to add this inw value?
I have created YDocumentListSelectorForm.java extending DocumentListSelectorForm.
public static final String INORDERNO = "inorderno";
if("inorderno".equals(attribute))
          documentListFilter.setId(attributeValue);
YBillingStatusCRM.java is created which extends BillingStatusCRM.class
com.sap.mw.jco.JCO.Function billingListJCO = connection.getJCoFunction("YCRM_ISA_INVOICE_LIST_GET");
if(billingList.getFilter().getExternalRefNo() != null && !billingList.getFilter().getExternalRefNo().equals(""))
          importParams.setValue(billingList.getFilter().getExternalRefNo(), "ORDERNO_FROM");
Accessing it in JSP organizer-content-doc-search.jsp
YDocumentListSelectorForm yform =
    (YDocumentListSelectorForm)pageContext.findAttribute("YDocumentListSelectorForm");
<option value="<%=YDocumentListSelectorForm.INORDERNO%>" <%=form.isAttribute(form.INORDERNO) ? "selected" : ""%>> New Value</option>
Regards,
Shaun
Edited by: Shaun07 on Aug 5, 2010 7:29 AM

Hello,
I want to add one more value in Drop-Down box of the search criteria of invoices.
As on now there are 2 DropDown boxes
in Your Referance No
in Transaction No
(New)
in Order No (This will have search value as "Sales Order No")
Can anyone tell how to add this inw value?
I have created YDocumentListSelectorForm.java extending DocumentListSelectorForm.
public static final String INORDERNO = "inorderno";
if("inorderno".equals(attribute))
          documentListFilter.setId(attributeValue);
YBillingStatusCRM.java is created which extends BillingStatusCRM.class
com.sap.mw.jco.JCO.Function billingListJCO = connection.getJCoFunction("YCRM_ISA_INVOICE_LIST_GET");
if(billingList.getFilter().getExternalRefNo() != null && !billingList.getFilter().getExternalRefNo().equals(""))
          importParams.setValue(billingList.getFilter().getExternalRefNo(), "ORDERNO_FROM");
Accessing it in JSP organizer-content-doc-search.jsp
YDocumentListSelectorForm yform =
    (YDocumentListSelectorForm)pageContext.findAttribute("YDocumentListSelectorForm");
<option value="<%=YDocumentListSelectorForm.INORDERNO%>" <%=form.isAttribute(form.INORDERNO) ? "selected" : ""%>> New Value</option>
Regards,
Shaun
Edited by: Shaun07 on Aug 5, 2010 7:29 AM

Need to add new status to the resource

Please let me know how can I add the new status to the resource record in resource maintenance screen.

Ok Thanks for the reply
Is it possible to create the copy of that activity (Resource Maintenance)
and add the status as required?
And use this copy instead of standard Resource Maintenance?
Please suggest?
Thanks

User status Profiles - Add new status

Hi Experts,
We're working in cProjects 4.0, and we want to customize the status profile for some objects in the project, trying to add a new status "in evaluation" between standard status "release" and "completed".
It is very important that you <b>cannot change to this status unless the item is released</b>. And we want to define that you can come back to the status only from defined statuses.
We tried to define that under customizing point "Create/Change User Status Profile" but we don't get to have the discrimination criteria just mentioned above.
Any help/hints on this?
Thanks in advance!!
Kind Regards,
Isabel

Isabel,
You should be able to accomplish this by setting them as below. You could set up the influence like the below
Created /initial - System status REL Disallowed
Released/Initial - System status Completed Disallowed
Released /inEvaluation - System status Completed Disallowed
Completed /InEvaluation - System status Completed allowed or No restriction
and set the Next action to No action.
By setting them as above When you are in create system status, you can only have the created/Initial User status active. In order to release the object the user will have to propogate to the Released /initial user status .
After the system status Release has been set, depending on the completion of your activity you can set the released/inevaluation user status.Only after you set this status can set the system status to complete.
Hope this helps.
Thanks
Narasimhan

How to add new picklist value to states and countries to Address object

Hi,
I like to query and update picklists, state and country, in the address. What're the record type and filed name for them?
I tried record type, Address and field name, State and Country, with no luck.
Thanks

Hi,
As far as I know you cannot modify the address object at this point of time.
If you want to add values or modify the picklists for State & Country, you would need to use custom fields and add all required values and then use those fields. (You can remove the Addres Object completely from the layout and then substitue it with the custom picklists that you have designed - possibly cascading picklists with Country as parent and State as child )
Hope it helps.

Add new fields to additional data tab in customs declaration

Hello friends,
My requirement is to add Z fields in the additional data tab in transaction /SAPSLL/CL_CUS_02 of GTS. I would also like to know If its possible to create a new tab all together in /SAPSLL/CL_CUS_02 where in we can add fields from a custom table.
Thanks a lot in advance. Your help will be highly appreciated.
Regards,
Koustubh

Hi Koustubh,
As Dave pointed out, there is a BadI for extra tab on declaration Item and Header.
There is an example implementation already available in the System. I believe that 1 BadI will no be enough for what you need.
UI enhancement BadI uses standard CUHD and CUIT tables to store the extended data ( via table APPEND ), in order to save content to Z* table you will need a separate BaDI.
Also, If you intend to use this extra data in outbound message / declaration Idoc, extra BadI has to be used and also the basic IDoc type will need to be extended with your Z* segment. Thats probably 2-3 BadIs working in tandem.
Can you tell what is the purpose of the extra data / extra tab ?
Best Regards,
Branislav Petricek

New status values for credit

We needed to define new values of the status of the credit like "document OK, document not OK...." located in table VBUK (field CMGST) to use standard transaction VKM1.
It is this possible one? As we can obtain it.
For your information we have 4.6B release.
Thanks to all.

Hi
The values for the field VBUK-CMGST are derived from the domain CMGST. You can check the available value range by running the transaction SE11 for Domain CMGST.
For your requirement, you will have to enhance the value range for this domain. However, doing this would mean that you will have to carry out SAP Core code changes.
Please reward points if this helps you
rgds
Nageshwar

Add new Place to Time Zone tab in Sys Prefs

I have seen a couple of posts on other forums, plus a similar request, here on the iPhoto09 forum, but not had any success with this yet. I want to do this for the same reason as the OP on the iPhoto forum...so iPhoto Places defaults to an area local to myself
The procedure I have seen ( see links below) seems to refer to OS ver 10.2. I have tried it on my system (10.5.8) and I can't seem to get it to work.
Basically it involves editing
MacintoshHD/System/library/PreferencesPanes/DateandTime.prefpane
--- Show package Contents
Contents/Resources/TimeZone.prefPane
--- Show package Contents
Contents/Resources/allcitiesadj.plist
Contents/Resources/English.lproj/Localizable_Cities.strings.
Needed to change read /write permissions to edit the file(s), then changed them back after editing.
The original article in http://www.macosxhints.com/article.php?story=20020831074937191 refers to changing ownership of the files, from System to User and then back again. I cant see an option to change ownership, but could see red write attributes so I changed that to allow editing of the files. I do notice now that the two files, now show user as owner of the files not System. maybe this is why this procedue is not working
I added the new Place in allcitiesadj.plist
<array>
<string>49.120000</string>
<string>-2.070000</string>
<string>11</string>
<string>Europe/London</string>
<string>GB</string>
<string>Jersey</string>
<string>England</string>
</array>
And added an entry to Localizable_Cities strings for Jersey:
"Jakarta" = "Jakarta";
"Jerusalem" = "Jerusalem";
"Jersey" = "Jersey";
"Kabul" = "Kabul";
"Kampala" = "Kampala";
Restarted the machine, but Jersey still does not appear in the Time Zone tab.
Anyone give me any pointers here?
Here are the links I have seen so far:
http://discussions.apple.com/message.jspa?messageID=9961503#9961503
http://forums.macrumors.com/showthread.php?t=643917
which links to
http://www.macosxhints.com/article.php?story=20020831074937191

Solved.
It was because editing the files in Text Edit changed the file ownership. Had to use Terminal and chown to revert ownership back to system.
Using TextMate would have done it without changing the file ownership.
Neil

Is it possible to add new files to the aplication tab in Settings? How do I do this?

Well, I'm trying to download 7-zip file from Rapidshare and I use SkipScreen. But I can't really leave my computer, though I want, because Firefox doesn't support those files and I have to wait till SkipScreen make the file available, so I could just press one button (!!). Gosh, I'd like so much to add 7-zip files to Firefox aplication tab, so they downloaded automatically.

No. Use DropBox. *lol*
Mylenium

Want to add new status while searching PO in EBP

Hi All,
While in EBP, I want to search for POs at link: PURCHASE ORDERS>>PROCESS PURCHASE PRDERS>>FIND.
At this position i want to search for the POs with some statuses like: ordered,awaiting approval,in your inbox etc..
I want to add 2 more statuses while searching POs. These statuses are "Transaction Completed" and "Error in Process".
Please tell me how to add these 2 extra statuses there.
Reg,
Bis

Hello Bis,
You can find PO in status 'Error in process' using status drop-down list with wording 'Transfer Failed': this is standard.
Regarding status 'Transaction completed', why do you want to make a difference with standard status 'Ordered' ?
Regards.
Laurent.

How can i change or add new default optiom in su01 tab

Dear Experts ,
here oe End user Required some Requirments in SU01 -> Default tab
su01 --> Default tab -->Decimal Notation having different styles (1,234,567,89)
but my END user wants like 12,34,56,789 this format
how can we get this type ...is it possible to change decimal notation format
Regards

Hi,
Check below thread which is related to your problem:
How to convert decimal notation to comma notation
Thanks
Sunny

Add new status values to "documentation tab" in solar02

Similar Messages

Maybe you are looking for