Add new tab for sales transaction

Hi,
I want to add a new tab in sales transaction for bank detail, the data of this tab should be get from BP master data, and save to crmd_order transaction table.
what method should I implement?
thanks
Gang

Hi Gang,
Use EEWB to enhance the order. The fields shall be added to CRMD_CUSTOMER_H table.
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/43/04bede807721ece10000000a155369/frameset.htm">EEWB</a>
for populating these fields based on BP master data, use BADI COM_PARTNER_BADI method COM_PARTNER_MERGE.
This BADI gets called when you enter partners (sold-to-party). In the mentioned badi method, read bank details from BP master and set this to your Z-fiedlss using FM CRM_CUSTOMER_H_MAINTAIN_OW.
Hope this helps.
Regards
Kaushal

Similar Messages

How to add new tab screen in transaction BP

Hi,
   Please let me know How to add new tab screen in transaction ukm_BP. Is there any SPRO configuration needed for this?
Thanks,
Debi.

Hi,
You may also try the exits available with the MIGO transaction. To find exits you can use the fillowing code by giving tranasaction code as input.
REPORT zrmexitfinder                               .
TABLES: modsap, modact, tstc.
PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
            input2 LIKE modsap-typ DEFAULT ' '.
DATA: search1(6),
      search2(3),
      search3 LIKE modsap-member.
DATA : first_row VALUE 'Y'.
CONCATENATE: '%' input1 '%' INTO search1,
'%' input2 INTO search2.
SELECT * FROM tstc WHERE tcode LIKE search1.
first_row = 'Y'.
CHECK tstc-pgmna NE space.
CONCATENATE '%' tstc-pgmna '%' INTO search3.
SELECT * FROM modsap WHERE typ LIKE search2
AND member LIKE search3.
    SELECT SINGLE * FROM modact WHERE member = modsap-name.
    IF first_row EQ 'Y'.
      WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
             45 modsap-member, 70 modact-name.
      first_row = 'N'.
    ELSE.
      WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
    ENDIF.
    CLEAR : modsap, modact.
ENDSELECT.
IF sy-subrc NE 0.
    WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
ENDIF.
CLEAR tstc.
ENDSELECT.
END-OF-SELECTION.
CLEAR: search1, search2, search3.
Regards,
Renjith Michael.

Add new tab under 'Sales Area view/Data' of Customer Master TransactionXD01

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Add new tab in Sales Order(VA01/02/03)

Hi All,
Additional Tab A and Tab B in Sales Order (header) are already used for other developments so I need to add a new tab in Sales Order header/item. (I have already updated the table VBAK/VBAP with the include structure).
Could anyone give the steps as to how I could proceed ?.
Thanks,
Kushi

Hi Kushi,
You can use screen 4459 or 4462 in program SAPMV45A which are the item additional data A or B tab to add your custom fields. In order to capture the data from this custom fields you can use user exit USEREXIT_SAVE_DOCUMENT_PREPARE OR USEREXIT_SAVE_DOCUMENT in program MV45AFZZ.
Please check this link for more information on sales order user exits.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Ferry Lianto

How shall i add new tab in cgab transaction under property tree.

hi,
how shall i add new class tab under phrase-set-to-attribute assignment under industrial hygine & safety data in transaction cgab.
thanks and regards,
manish.

Hello Manish,
Based on your data input requirements, first create a characteristics in t-code ct04. Create a class (in t-code cl01) and assign the characteristics to the class. For characteristics, define "Values" by clicking on button "Other value check" and selecting "check values with function module". Input FM as "C14K_PHRASECHARACT_CHECK_F4".
Now, create phrases (t-code cg12) for the actual values which you wish to have as F4 values on your IHS screen for the custom fields. Then create phrase set (t-code :cg1b) and assign the phrases to the phrase set.
Go to spro>EHS>IHS>Basic settings>Assign value assignment types to classes..........define here the name of the tab under which custom fiellds should come. Assign the above created class here.
Now, go for master data match-up (t-code cgcz) , select first three checkboxes and execute.
Go to cgab now, and you should be able to see the value assigment type created in spro in IHS section . Double click it, and assign the phrase set against the created characteristics.
Regards,
Pavan

How to add new Tab in IW32 transaction ?

I need to add a new tab in the header tabstrip...
I found an enhancement IWO10018..
There are two exits in it.
EXIT_SAPLCOIH_018
EXIT_SAPLCOIH_019
I want to know if this enhancement will help me ?
if so please tell me all the steps of how to use these EXITs and creating screens etc... to get that tab.
Also suggest if there is better way.

Hi,
Goto SMOD Tcode, Give the Enhance ment name, IWO10018
Click on Test, and Click on Activate and Then goto Tcode IW32, and check wether a new Tab is created or not.
Deactivate and double click on the ScreenExit, it will take u to Screen Painter, design ur Screen like add fields etc., and do coding in PBO and PAI accordingly.
Regards
Bala Krishna
Edited by: Bala Krishna on Aug 26, 2008 5:13 PM

How to add new fields for FB01 transaction both at Header and Line item

Hi Guys,
I would like to add the new fields at header and item level in FB01 transaction. Can I acheive this by using transaction EEWB....please help me on this.
Thanking you

Hi,
We are trying to copy a work flow objects from ECC6.0 to 4.6C...where we found the following Select statement.
*Determine Top WorkItem Instance
if im_top_wi_id is initial.
   select wi_id top_wi_id wi_rh_task into lw_top_id from sww_wi2obj
     up to 1 rows
     where wi_rh_task = im_wftask and
           catid      = 'BO'      and
           instid     = l_instid and
           typeid     = 'FIPP'.
   endselect.
   endif
As table sww_wi2obj can't be found in 4.6C, can any one help how to replace or implement the same logic as above statements.
Thank you....

How to add a new Tab in XD02 Transaction

Hi all,
How to add a new Tab in XD02 Transaction. please explain step by step.
Thanks

Hi Anil
Goto T code OBD2 select your account type for which you want new tab. Click on details button above.
On next screen you can see "Field status" box.
Select (double click) on the view (i.e. General data or CC data or Sales data) in which you want to add new tab.
Again on next screen double click on the field present under "Select group" box.
On next screen go ahead with your settings, i.e. which fields you want and how.
Save the changes. Goto XD01 and test the same.
try and revert

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

How add new tab after reason for rejection tab using tcode va01 using badi

I want to add new tab in va01 using badi. I search badi -> badi_sd_update_plval at the time of implementation it ask about access key.
which is suitable badi for va01 enhancement.
Any screen exit is available for this enhancement.

You need to implement BADI through SE19. Refer below link for details
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm
Hope this helps..

How add new tab after reason for rejection tab using tcode va01

Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.

I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal.

What is the BADI to create a new tab in ME21N transaction

Hi,
I have created a new document type zbr with the transaction spro.
I wanted to add a new tab for the given document type zbr. How to create a new tab for the document type.
How to create a new tab using BADI. what is BADI used to create the tab

Hi,
Pls check BAdI 'ME_GUI_PO_CUST' for your reqmt.
Pravat.
<i>*Reward points if helpful</i>

How to add new tab under tansaction tab

Hi Team,
I would like to add a new customized tab to the "Transaction Data" screen in transaction CRM_DNO_MONITOR.
It currently has the following standard tabs:
Overview
SAP Attributes
SAP Notes
Solution Database
Partners
Actions
Status
Documents
and I would like to add a new one with 'My Data'
We want to add some Ztable fields on this separate tab - things like-
Fields Names :
1.     Change type
2.     Change Test Procedure
3.     Fall back option
4.     Impact Assessment
5.     Module
6.     Business Unit Impact
7.     Estimated Cost
8.     System Performance
9.     Risk
Can anyone give me any pointers on how to proceed ?
Thanks & Regards,
srikumar.anamala
Edited by: srianamala on Apr 30, 2010 6:57 AM

Hi,
I think for that you need a user exit or BADI. Like most of the standard transaction you will find user exit or BADI to add new tab.
For example MM06E005
You can create custom fields in the includes CI_EKKODB and CI_EKPODB . Create yours screen 0111.
EXIT_SAPMM06E_016, EXIT_SAPMM06E_018 use to export and import data.
See BADI: ME_PROCESS_PO_CUST
Thanks,
Abhijit

How to add new tab page to equiment ?

Dear Guru's
i created the new equipement category K by coping the standard S.when i am creating the equipment while using equipment category S i am getting tab pages General,Location,organization,structure,Sales and Distribution.
But while using the equipment category K for creating the new equipment i am getting the tab pages General,Location,organization,structure 4 only.
why the 5 one Sales and Distribution is not coming ?
how to add new tab page like Partners ?In that fields like sold to party,ship to party ?
Could anybody help me in this regards
Thank you
suribabu

In Equipment category creation config in IMG, check for the View Profile for both the equipment category S & K.
For adding new tab, follow the IMG path.
PM & CS => Master data => Technical Objects => General Data => Set view profiles for Technical objects
Select the View profile which has been assigned to your equipment category & click Activity & layouts of views. In that screen, under seq.no, select the Partners.
Do the same for other requried tabs based on your requirement.
If there are same profile assigned to both equipment category, go to equipment creation creation => Edit => view selection. There you will find the required tabs.

Add new tab for sales transaction

Similar Messages

Maybe you are looking for