Add New Transaction code at OMBR - Version Print Indicator

Hello
I need to add one transaction in the Version Print Indicator List. I know it can be done.
Can any one guide me  how to do, as "New entries" is grey there. ( To best of my knowledge it is done through some other route or means)
Regards

Hi,
Use t.code SE16.
Enter table name T158 and press F5.
This will allow you to add new transactions to the table.
Nir

Similar Messages

  • How to add new T Code FB01L in OBU1

    Dear Expert,
    How to add new T Code FB01L in OBU1
    Regards,
    Alok

    Hi, Alok.
    It is not possible to add new entries to table TSTCP via transaction OBU1 (you can only modify the default parameters for the existing transactions).  However, new default parameters for other transactions can be created via transaction SE93 (trans F-44).  You can review notes 19798 and 310587 for further information.
    I hope this helps.
    M Trein

  • HOW to create new transaction code in SAP

    Dear All
    Thanking you for your cooperation
    Pls help,
    how to create a new transaction code and link with the process??????????
    Thanking you

    Hi
    you can crete Transaction code in Transaction SE93.
    To create a transaction code:
    Enter a transaction code (up to 20 characters).
    Choose Create.
    A dialog box appears. Enter a short text and choose the transaction type.
    The transaction type can be as follows:
    Dialog Transactions
    Report Transactions
    Object-Oriented Transactions
    Variant Transactions
    Parameter Transactions
    In a report transaction, you use a transaction code to start an executable program (type 1). An executable program usually has three steps - data entry (selection screen), data processing (often using a logical database ), and data output (list).
    To create a report transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and selection screen (report transaction).
    When you define a report transaction, you can specify the selection screen and variant with which you want it to start.
    You can also protect the report transaction against unauthorized use. To do this, enter the name of an authorization object in the corresponding field.
    Dialog Transactions
    In a dialog transaction, the flow of the program is determined by a sequence of screens. The screens that are called within a transaction should belong to a single ABAP program, usually a module pool (type M program).
    To create a dialog transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and screen (dialog transaction).
    You can create transaction codes for Custom query;s created using SQVI also
    Thanks & Regards
    Kishore

  • Need to add Standard transaction code to User Menu.

    Hi All,
    I need to add Standard transaction code to User Menu. How this can be accomplished?
    Thanks

    Your Security and/or Basis team probably have control of the user menu settings.  On the other hand, if this is for YOUR user menu, you could choose to simply adjust your favorites.

  • To add new transaction key

    All SAP Gurus,
    We want  to add new transaction key in account determination (OBYC).
    How to add it?
    Regards,

    Hi Rajan,
    If you are talking about the transaction key at Materials Management postings (MM) group (RMK),
    it is merely not advisable to create a transaction key.
    You have General modification like BSA, INV etc for differentiating the postings.
    The transation key mentioned in the earlier mail is for below purpose:
    To enable the system to find the relevant account for provisions (
    accrued delivery costs or miscellaneous provisions, for example),
    must assign a transaction/event (internal processing) key to each
    condition type that is relevant to provisions in the step Define 
    Calculation Schema.                                              
    Cheers
    Arun.

  • How to add a transaction code in SAP?

    Hello,
    i just installed SAP NetWeaver Application Server ABAP 7.03 SP04. but when i login with a admin user that i created, i dont see any transaction codes under acoounting folder.
    1-) how can i add transactions codes to SAP? ( to add invoice, order information etc..)
    2-) how can i see these tables in database in SAP
    thanks you
    Regards...

    Notice that there are no application tables, transaction, data for modules like FI,SD, MM...
    Purpose of trial/demo version available on store.sap.com is to practice ABAP and Basis skills.
    For this you have SFLIGHT model and its tables available.
    cheers
    m./

  • New transaction code similar to UPSPM / UPSPL

    Hi,
    IS there any way to create new Z transaction codes similar to UPSPM / UPSPL.
    Thanks

    Hi,
      That is called as Dialog programming.Find the "Program (screen)" for that transaction UPSPM/UPSPL under System --> Status menu and in Transaction SE80 Choose Programs in the dropdown and put this program and hit enter and find the details of the transaction and copy it.
    thank you
    arun

  • Add new Location code in Investment Management

    Hi Gurus,
      Please Suggest How to create new  Location Code in Invest Management .
    Thanks in advance..
    Ramanjaneyulu

    Hi,
    you can create it in the master data or copy from the order; check the link: http://help.sap.com/erp2005_ehp_04/helpdata/EN/2a/f9f273493111d182b70000e829fbfe/frameset.htm
    BR, Tomislav

  • New transaction codes?

    Hi experts,
    any listing provided by SAP?
    regards
    M.M

    Hi,
    I dont thnik there are many significant transaction codes in BI 7.0, except few like RSA1OLD (to access old administrator workbench).
    Thanks & Best Regards,
    Rajani

  • Transaction code MB02 - Issue with Printing and Process overload SM50

    Hello Experts,
    We are actually having a problem when trying to print a smartform in tcode MB02. Also, when verifying transaction SM50 for that process then we noticed that there was a timeout after a big data load.
    Here is the scenario:
    1. Entering a material doc 9999 and Press enter
    2.Select and double click a line item for that material doc
    3. Click on Messages
    3. Select an output type and click on Repeat output
    4. Click Save
    5. Click Save again.
    In a normal case, a screen would appear for printing but this time nothing seems to happen. And then when we go to tcode SM50 and check that process there is 2-3 dumps.
    As a newbie programmer I do not understand any of these procedures properly. If anyone can shed any light on this, i would be grateful.
    Regards,
    Thyaga

    Hi everybody,
    Thanks for your answers.  Actually after a lot of time spent on debugger i found that the variable returncode is 999 and then a subroutine is called which in turn calls my program to trigger the smartform. 
    The problem is throughout my program i do not change the value of the returncode .i.e it remains 999.  What i did then is change the returncode 999 before my smartform-program is called then after testing i see that the output is printed without any error.
    The program and subroutine i am talking are as follows:
    1. Program: RSNAST00
    2. Subroutine: programm_aufrufen
    3. Line 1297 returncode is 999
    4. Line 1318 - my smartform program is called
    5. Then at 1324 - on control is done on returncode.
    Please advice if these steps are conform/ethical.  Also, can you suggest any other steps i can do without the need to modify my own program.
    Thank you very much for your replies.
    Kind regards,
    Thyaga.

  • How to call a new transaction code after GR/GI is done in MIGO ?

    Hi Guys ,
       I have a requirement  like Whenever GR /GI  is done the material documnet will be created. so here i need to excute my report programe . whenever the  material document created  my report needs to excute and generate a report in background?  so  i need  to find badi   or exit for this.. can any help me about   migo  transaction  how to exute my report  in back ground?
    Thanks in Advance .

    Hi
    Try to use the BADI MB_DOCUMENT_BADI, probably the method MB_DOCUMENT_UPDATE is gooed for you
    Max

  • How to create a new transaction and add it to Area Menu

    Hi.
    I have to create a report and run the report using the Tcode and Tcode has to be added in the Area Menu at the initial screen.
    Please tell me how can i do that.
    Thank you in advance

    You can add additional menu transaction in the SAP main menu without affecting the original SAP default area menu S000.
    For example, you have created a transaction code called ( z123 - ABC Own Report ) and you want to insert it under Logistics.  The specific user will be able to access ABC Own Report by clicking Logistics -> ABC Own Report.
    Steps :-
    Goto Transaction SE43 - Area Menu
    Click the copy button.  Copy from S000 to ZXXX
    After copying, click Change (area menu ZXXX)
    Double click on Logistics and add in your transaction code in the AreaMenu.
    Remembers to Activate it.
    Next Goto Transaction SU01 - Maintain users
    Type in the user name and click the Defaults button
    Type in the area menu (ZXXX) in the Start Menu field.
    Click Save
    The user will be able to see the additional transaction on the next logon.
    The CUA area menus are converted to tree navigation in Release 4.6A. The menu contents are automatically copied into a new data structure in Upgrade to Release 4.6A or higher. You can edit Area Menus with a new maintenance interface (Area Menu maintenance transaction: SE43 ).
    Reporting Tree Integration - Only transactions could previously be put in Area Menus. From Release 4.6A you can also put all the types of reports which are in reporting trees, in Area Menus. The system automatically assigns a transaction code to call the report from the menu. If you have already put the report in another Area Menu, no new transaction code is generated, the unique transaction code already assigned is used.
    You can create Area Menus from complete reporting trees with the migration transaction RTTREE_MIGRATION . The report transaction codes are generated automatically.
    Reporting trees can only be displayed. They cannot be maintained. To modify the contents of reporting trees, you must convert them with the migration transaction. You can then modify the contents with the Area Menu maintenance.

  • Transaction Code Comparion in Different Versions

    Hi Folks,
        I have an requirement to compare transaction codes of different version and download it if there is any change.
    For example: lets say there is a transaction code XYZ in sap R/3 4.7 version the same XYZ transaction exists in SAP ECC also.
    But there are some changes in the tranction in the SAP ECC version. The changes are like they have added a new screen to it.
    I need to how to find out the changes if there is any.
    Thanks & Regards
    <LOCKED BY MODERATOR - DUPLICATED THREAD>
    Edited by: Alvaro Tejada Galindo on Dec 14, 2009 4:07 PM

    Hi, 
    you can use comparing function in version management. it will tell you every change.
    good luck.
    Peter

  • New Tr.Code In ECC 6.0

    Hi All.
    Please let me know the new transaction codes added in ECC 6.0
    Treat it as most urgent.
    Thanks in Advance.
    Regards,
    Syed

    Dear Soniya,
    Release Info:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
    Regards,
    Naveen.

  • Adding new company code

    Hello!
    I am not sure if this is the correct thread for this question but I think this is the most appropriate.
    My inquiry is how can I configure another system company code? For example, we are now Company A1B1 and would like to add A1B2.
    Also, how do I add it to table T043G (Tolerances for Groups of Customers/Vendors)?
    Thanks a lot! _

    Hello Ricardo,
    If you want to add new company code then it is suggested to consult with your FICO consultant, because it will require some of the financial settings for that company code i.e. chart of account, posting period etc.
    To add Entries in Table T043G you need to do add your company code in OBA3 transaction code.
    Hope this helps.
    Regards
    Arif Mansuri

Maybe you are looking for

  • How to see the change logs for billing document

    Dears, Could you please how to see the change logs for billing document. My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made. Thanks in advance Ranjan

  • Best way to ensure my library is safe.

    Any clues to ensure my library in iTunes is safe? I am assuming a backup to DVD, sorted by dates added. I have heard that sometimes external firewire hard drives can lose files at the same time as my laptop will, or something like that (providing the

  • Downloading files in ONE CLICK

    I was wondering if there is a way on my MBP to set it up so I can click on a file (picture, link, etc ) to download, and instead of having the "save image as" dialogue box pop up, (after hitting Control-Click) it just immediately downloads without ha

  • Where is the JavaFX runtime jar file in jdk7u4

    So I find jdk 7u4 release notes: The JavaFX SDK is installed with Java SE 7 update 4 for both the Windows and Mac OS X platforms. The JavaFX Runtime is installed with the JRE for the Windows platform.But I can't find the javafx runtime jar file, jfrt

  • Time Machine and Enternals

    What is the best external hard drive to hook a new macbook(black) up to Time Machine? What is the best portable external hard drive for the new macbook (speed for size, biggest one without slowing the computer down)? Thank you in advance, JW