Add New User to Site as new entry in List

Hi,
I want to provide access to my site to new users as soon as i entered his/her name in the sharepoint list.
Access should be specific to that list only.
This can be done in Sharepoint 2013 ?

Hi,
Do you want that the users who you type name in list items have permission to access the list items which you type users’ names? Which permission do you want to grant to users?
If you want to grant only view permission to users who you type names in the SharePoint list column to access the list items, you can create a workflow using SharePoint 2010 platform in SharePoint 2013 Designer.You can add
“Replace List Item Permissions” action and click these permissions to add permissions. The value steps are shown as figure below:
The workflow is:
Thanks,
Dean Wang

Similar Messages

IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

How can we add new entry to a XML file?

Hi All,
I'm having problem to add new entry (elements &
attributes) to an existing XML file. I have created an XML file.
Few entries are there which I'm showing in a datagrid. Now, in run
time I have provision for new entry. I'm gathering the whole
entered information & preparing a string in the same format
what I have in XML file. But when I'm trying to add that entry to
my existing XML it won't work. How can I will be able to do
so?

Are you using appendChild()?
Tracy
BTW, this forum is for Flex Builder questions. Language
questions should go in General Discussion.

Add new entry to HUSSTAT

Hi All,
How can i add new entry to HUSSTAT transparent table ?
for example :
I want to add this entry to HUSSTAT
200 HU0000007100 E0006 X ...
some suggested to use FM HU_HEADER_UPDATE but what inputs should i give to this FM its not clear .

Perhaps I'm not using the right terms. Let me try and restate my problem.
I am now using the "Notebook" theme. I have already created some entries where I've changed the default "My Blog" and associated Latin on the yellow header on top of the page to what I want them to say (i.e., "Bill's Blog" and associated text). You can see an example of such an entry here:
http://www.billmarksteiner.com/BillMarksteiner/Bills_Blog/Entries/2007/8/27_Dell_repair..._MUCH_better_thanexpected.html
When I click on the "Add Entry" button, I get a page with a yellow border on top with the words "My Blog" instead of what I'd like, which is "Bill's Blog". The Title field and its associated blog entry text (again, Latin) is lower on the page, and I understand that this is necessarily pulled from the standard template because that is the main body of the entry, which one would need to edit to make a relevant entry. But I'd like to at least automate the header material on the yellow strip at top to say "Bill's Blog" instead of "My Blog", and have standard text up there that I create, not Apple.
I guess what I'm asking is if there is a way to edit the template itself so that hitting the "Add Entry" button creates a templated entry of my design. Or at least a templated entry containing my text vs. Apple's.

How to add new entry, in table on button click.

i have 2 input ,witch i am taking from numeric controls. this 2 input are use to calculat my output.
on button click i want these 4 things should go in the table.
now my problem is when i click the button previous entry in the table get lost...
plz help me to slove this problem.

When you want to preserve the existing values in a table or array, you need to use "Array -> Build Array". Wire the local variable of the table or array to top entry, and wire your new entry to the bottom. Depends on the dimension of the array and the postion you want to add. You might need to some array manupilations. Try out some of the array VIs to see how they work.
Joe

Maintenance view: add new entry under existing ones

Hi,
I would like to add a new entry in a maintenance view, but keeping the existing entries visible. That is, I want a new line to appear under the older ones, so I can see them, instead of opening a whole new screen with empty lines.
Thanks in advance,
Ivson

If you want to add new field in the view.
Goto SE54 and carry out the following steps:-
1) Enter the name of the table or view.
2) Choose Generated objects.
3) Choose Create/Change. You go to the generated objects maintenance screen.
4) Choose Change. A screen of reasons for changes appears.
Select option(s) and choose Continue.
The new field will appear in the view.

Add New Entry to a blog

If I start a blog and "fix" the blog entry layout. Is there some way to save that so I dont have to re-design it every time i wanna make a new entry?

Perhaps I'm not using the right terms. Let me try and restate my problem.
I am now using the "Notebook" theme. I have already created some entries where I've changed the default "My Blog" and associated Latin on the yellow header on top of the page to what I want them to say (i.e., "Bill's Blog" and associated text). You can see an example of such an entry here:
http://www.billmarksteiner.com/BillMarksteiner/Bills_Blog/Entries/2007/8/27_Dell_repair..._MUCH_better_thanexpected.html
When I click on the "Add Entry" button, I get a page with a yellow border on top with the words "My Blog" instead of what I'd like, which is "Bill's Blog". The Title field and its associated blog entry text (again, Latin) is lower on the page, and I understand that this is necessarily pulled from the standard template because that is the main body of the entry, which one would need to edit to make a relevant entry. But I'd like to at least automate the header material on the yellow strip at top to say "Bill's Blog" instead of "My Blog", and have standard text up there that I create, not Apple.
I guess what I'm asking is if there is a way to edit the template itself so that hitting the "Add Entry" button creates a templated entry of my design. Or at least a templated entry containing my text vs. Apple's.

HT4528 i have a verizon iphone 3G; apple recently upgraded the operating system. PROBLEM: calendar has wiped out all entries and i am unable to add new entries. Help!

have verizon iphone 3g; recent upgrade of operating system. suddenly calendar has wiped out all entries and am unable to add new ones.

Please define "tried to add the Image"?
OS Installer Packages do not point to "images". They point to the complete set of source files including the directory structure from the media.
Is there a specific reason you are using OS Installer packages though? In general, there is no reason to use them anymore (unless you are actually still deploying XP).
Jason | http://blog.configmgrftw.com | @jasonsandys

My iphone 5c calendar will not add new entries. please help!

Starting today I can no longer add new appointments to the calendar on my 5c. I have checked settings and no other app is trying to access my calendar. my calendars are turned on in my emails...i can add all the information, pick the calendar and then tap "add" and poof! nothing is there.
utterly maddening. please advise.

Are these photos that were taken by your 5C's camera?

After my upgrade to iOS6, my iPhone4 lost all entries in the Reading List and Bookmarks. I cannot add new entries. Any thoughts on how to fix this?

I'm not 100% positive that this is related to the iOS6 upgrade, but the timing is certainly suspicios. Previously, I had 7 entries in Safari's readling list and many entries in the Bookmarks. Now, I have nothing except the large pair of sunglasses and help text that tells me how to add a link to the reading list.
When I am looking at a webpage and click on the Forward button, I'm giving all sorts of choices now in full color... facebook... Message... Twitter... Mail... Add to homescreen. The following buttons are all grey: Print, Copy, Bookmark, and Add to Reading List.
I'm guessing that the icon color is a red herring. Print and Copy, despite being grey, appear to work fine. Bookmark and Add to Reading List have problems.
Adding to the Reading List makes the forwarding screen go away, as though the link was added. When I click on the Bookmark icon and look at my reading list, it remains empty, displaying the large sunglasses and help text, as though the list has never had an entry added to it.
Adding a Bookmark prompts me to enter the name and location. Interestingly, the list of locations is empty. I have a single folder with no name and a check mark next to it. I cannot do anything else (make a new folder, for example). Once added, when I click on the Bookmark icon to look at my bookmarks, that list remains empty of individual bookmarks. All I have are: Reading List (still empty), History (full of expected entries), Bing (which takesme to some Bing thing).
Any help in restoring my bookmarks and Reading List entries would be appreciated. Thanks!

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

I can't delete calendars from iCal, they re-appear in a few moments. Also I can't add new entries. I have a backup on another Mac which is working properly.

For the last 2 weeks iCal has not let me update or delete calendars. It continues to remind me about events in the past (about 10 days ago).
Also, Safari is not recording history, apart from today the last entry is 2 weeks ago.
Time and date is working OK.
All software is up-to-date.

My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

How to add new entry of a sandbox solution to Office 365 standard menu

Hi,
I have created a sandbox solution for office 365. I want that web part to be accessed from SharePoint Standard menuitem.
It should be next to Add an App.How could i do that?

<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction
Id="----"
GroupId="SiteActions"
Location="Microsoft.SharePoint.StandardMenu"
Sequence="2000"
Title="====Project"
Description="Create Project">
<UrlAction Url="~site/SitePages/=-=-=.aspx"/>
</CustomAction>
</Elements>

6131 Add New language Not Listed After SW upgrade ...

Hello Every body,
I flashed my 6131 from Version V3.70 to V5.50. Everything Seems to be fine but Greek Language is not listed.
Greek Language was supported by previous firmware.
Any possible solutions ?
Thnask you in advance

Hello Ivotsis,
everything depends on product code of your Nokia 6131. You find this code under the battery. For example my product code is 0532273.
Sometimes happens, that the phone you bought probably in Greece is originally designed for other country and your language pack was flashed into your phone later by the reseller.
In this situation, if you use Nokia Software Updater it downloads firmware with language pack according to your phone's product code, where greek language is missing.
In other forum here is possible to check the product code of your phone against the language you need (before flashing the firmware) to know, if your language after flashing will be available or not.
In your situation is necessary, I'm afraid, to visit Nokia service center with request to flash firmware again with correct (greek) language pack. It may cost some money.
Best regards,
Tomas

Cannot add a new entrie with aisuser!! help urgent

hi,
i'm trying to add new entrie for assign a S-user with trasax AISUSER, but without succès.
i have this message:
Partner 000123456(my suser) not found.
Partner 0001068365 not found - see longtext
Message no. AI_SC_EN093
Diagnosis
Partner number 0001068365 was not found in table AICONTACTS.
Procedure
Please check if you entered the correct number (S-User without S) or use the value help for this field. If the value help doesn't provide any data the report AI_SC_REFRESH_READ_ONLY_DATA has not been run yet. It should be scheduled daily with transaction SM_CONFIG_JOBS as job REFRESH_ADMIN_DATA_FROM_SUPPORT. However if you want to run this job successfully the user who created the job must be maintained in this table first. So you should ignore the warning for this purpose, maintain the partner for this user and continue maintaining this table after the job has fetched the contact data for the value help from SAP Support Portal successfully.
Even then it can happen, that you don't find the partner number in the value help. The reason for this may be, that the user doesn't have enough authorizations for some actions, since only users with certaine authorizations are downloaded from SAP Support Portal. So you also may ignore the warning in this case, as long as there is no typo in the partner number.
i have do all that, but i have usullay the same problem.
thanks for your help
Hassan

Daniel,
Go ahead and Apply this note , it will fix your issue.
Do you have a third column in AISUSER T.Code .
This issue is fixed in ST : SAPKITL426
Note 1140822 - SAP customer number for installation number &1 unknown
Thanks,
Uday

Couldnot add new user to webserver

Hi All,
I want to add new users to my LDAP directory from webserver administartion console.
I am using Sun ONE webserver 6.1. I have configured my directory service.
When I add new user to it says -
You do not have sufficient access privilages to perform the operation.
Although, i can perform a ldapmodify command from the terminal to add new entry to the directory.

What Bind DN did you use to bind to directory server in the WS Admin GUI settings used to configure the Directory service? Take a look at Global Settings->Configure Directory Service settings in your WS Admin GUI.
Binding(the Bind DN) determines the permission level you are granted for the connection to LDAP. Try using cn=Directory Manager as Bind DN and test.
Thanks
Manish

Add New User to Site as new entry in List

Similar Messages

Maybe you are looking for