Add new values to the Domain J_1BINDUS3 CFOP category of the material

Hello Gurus
I have a request from the business to include some new values in the domain J_1BINDUS3 CFOP category of the material.
Since is a standard object seems to be a work Basis team, however before requesting this I would like to get some advice from the experts to understand if adding new values to this domain can cause side effects or if I should maintain other objects as result of this request.
I know table J_1BAON has to be maintained to properly determine CFOPs for the new fields but along that is there any other one?
Is this the right process to include new CFOP categories?
The requirement is to properly identify Assets as Productive and Non Productive when making the PO, since this can help us to determine tax code automatically.

Have you tried using "Map published data" in the Utilities pane, mapping the department field to the corresponding security group.
http://codebeaver.blogspot.dk/

Similar Messages

Add New value to the special reference indicator on the TO field

Can you please tell me how to add a new value to the special reference indicator dropdown which is on the transfer order.
LTAK->SPEZI ? Currently it is displaying values A & B in the drop down and want to add a new value to the indicator.
Thanks
John

Hi,
I dont think you will be able to add more values to this field from configuration.
If you check the data element and domain associated with this field (LTAK_SPEZI) in SE11. You can see that the value range for the domain has been defined there as A and B only.
So if you want to add a new value you can ask and ABAP/technical consulatnt to add new values to this Domain.
However i am not sure it will be useful (unless you have a specific requirement and want to modify the standard programs) as the field is checked in different program (eg in inculde LL03AF4V , LL03AF7F ) against these fixed values A and B.

FM - Add new value to WRTTP Field

Hi experts,
I would like to add a new value to the table Value types.
Currently this table contains values form 1- 3C.
Could Anybody tell me how I 'd add a new value?.
Thanks in advance,
Greetings,
Nachos

Hi,
I dont think you will be able to add more values to this field from configuration.
If you check the data element and domain associated with this field (LTAK_SPEZI) in SE11. You can see that the value range for the domain has been defined there as A and B only.
So if you want to add a new value you can ask and ABAP/technical consulatnt to add new values to this Domain.
However i am not sure it will be useful (unless you have a specific requirement and want to modify the standard programs) as the field is checked in different program (eg in inculde LL03AF4V , LL03AF7F ) against these fixed values A and B.

SharePoint 2013 web service: Error while sending claim based authentication request (The corresponding SID in the domain is not part of the intended account type)

We are using .asmx services for SharePoint features such as comments, and rating.
Service
Feature used
http://<<hostname>>/_vti_bin/socialdataservice.asmx
Commenting, Rating
http://<<hostname>>/_vti_bin/UserProfileService.asmx
For out of box workflows
In SharePoint 2013,
SharePoint – 80 web application is on claims based mode and user is logging in with windows authentication. With logged-in client context used to call SharePoint's default web service, we are getting below error message from
web service (Social data and user profile services).
Server was unable to process request. ---> The corresponding SID in the domain is not part of the intended account type.
When the service is accessed using console application with Visual Studio credentials (logged in user), we are able to access the service. Below is the code snippet
using (SocialDataService
service = new
SocialDataService())
service.Credentials =
CredentialCache.DefaultCredentials;
SocialCommentDetail detail = service.AddComment("<<url>>",
"Test Comment",
null,
null);
Are SharePoint 2013 web services not supporting request coming with claim based authentication web application?
Thanks, Pratik Agrawal (MAQ Software)

While this applies to 2010, I believe the same is true with 2013:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/925e5f46-317f-46d3-bc55-c67f07eb2372/call-sharepoint-web-services-using-claimbased-authentication?forum=sharepointgeneralprevious
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Server failed to start: The domain path does not match the running server

Hi,
I've configured Eclipse to run my local weblogic - which actually is working fine.
The server starts as intended and reaches state RUNNING.
As soon as this happens, OEPE tries to validate the server and compares the identified server's configuration to the expected configuration.
This finally results into the error message shown in the subject -- though server is still running.
!MESSAGE Server watcher[Oracle WebLogic Server 11gR1 PatchSet 1 at localhost]:The domain path does not match the running server.
Domain RootDirectory retrieved from the MBean of running server is: N:\Oracle\MIDDLE~1\USER_P~1\domains\MYWEBL~1\
Domain RootDirectory of this server: N:\Oracle\Middleware\user_projects\domains\myWeblogicServer
Obviously this seems to be an issue with the length of the directory and file names. The domain's configuration and all its start scripts do not have any 8+3 pathes, like USER_P~1 for user_projects. Nevertheless the MBean of the server returns such a "truncated" path which in turn is invalid for OEPE.
Fix: When setting up the domain in Eclipse, try using that 8+3 representation of the domain's location. Then the comparison will succeed...
My Question: Where do we need to ask for a fix in OEPE? The 8+3 path is still a valid one ...
Best Regards
Philipp

I haven't been able to reproduce this and 8+3 representation of the domain's location shouldn't be required.
Can you provide more information:
- is this a network drive?
- what is your OS: XP, Vista, Win7?
- what is the Windows file system type, is it FAT or NTFS
- Can you try install WLS on C:, e.g. C:\Oracle\Middleware\user_projects and see if it still happens?

Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.

Hi
I am trying to set up an Azure RemoteApp Hybrid solution.
I have created RemoteApp net and uploaded a custom image and all that is fine.
When I link my template to my Collection it fails after provisioning for about an hour.
I recive the following message: Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.
The join domin works fine and I have tryed with account with different lvl of access to my AD.
Any suggestion how to solve this?

Hello Eric,
I am landing into the same Problem and i read your guidance on this issue. Let me answer it point by point.
1. Check the VPN state to ensure it is active or connected state:
Sundesh:My Azure RemoteApp Virtual Network after successfull S2S configuration shows as Ready. Is that what you mean by Connected State? Earlier to S2S, it was just under connecting state.
2. Verify your VNET configurations have proper IP address ranges
Sundesh: The VNET address range, the Local address range and DNS has already been verified twice. In fact the same address ranges(with exception to VNET) are working fine on a VENT config on Azure VM instance. Verified.
3. Verify your DNS IP configurations are valid, (often this is the problem)
Sundesh: Yes its done and verified
4. Verify the credentials entered for domain join are valid.
Sundesh: Tested these credentials by joining a regular Azure VM to domain and it works there.
5. Make sure your VPN endpoint that Azure RemoteApp service is connecting to is not blocking traffic.
Sundesh: Can you please let us know the specific port numbers that we need to consider and i can have it checked with the Network team
Thanks
SUndesh

Hi All, I am trying to install informatica 9.1 HF 2 connecting to 11g DB. when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB. The DB is running any id

Hi All,
I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
The DB is running
any ideas?
the error message states:
THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
thanks

Yup, that did it.
I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
Thanks.

How to change the drop down list "Category" in the Risk page (PWA 2013)

Hello,
How to change the drop down list "Category" in the Risk page of a Project Site. I need to change the list of elements.
Thanks

Hi Robert,
You actually cannot edit the current template.
The process is as follow:
create a brand new project site from the existing template,
edit the site configuration (list, column, webparts, image, logo, theme...),
save it as a template,
associate it to an EPT.
See reference below:
http://blogs.msdn.com/b/brismith/archive/2010/03/15/customizing-the-project-site-in-project-server-2010.aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Urgent -Need to Add new values for the LOV field in forms

HI,
I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
Please Can some one help me in doing this?
Thanks
Suresh P

Go to Navigator and edit the LOV or create a new one.
hope that helps!

How can I add new value in a list box in a screen

Hi All ,
    In transaction CRMD_BUS2000120 (CRM Server), I need to add one value to the list box. Already 4 values are coming. How can I add 1 more value.
any suggestion is very appreciated.
Thanks & Regards,
Shekar.

Hi,
Check you have any exits to do that, if there are no exits then you can Copy the program and change the code.
to add the extra value in list box, you just have to append the new line to the internal table which you are passing to VRM_SET_VALUES FM.
some thing like this..
wa_list-key = sy-tabix.
wa_list-text = itab1-vbeln.
Append wa_list to It_list.
v_name = 'P_VBELN'.
call function 'VRM_SET_VALUES'
exporting
    id                    = v_name
    values                = It_list
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regads
vijay

How can I add new values only to a column of a spreadsheet?

I have three "while loops" that are executed in parallel, two generate values and the third while loop write the values in a spreadsheet.
The run time of each while loop is different, to synchronize the three while loops I use a "Wait Until Next ms Multiple", but sometimes the same value is kept twice.
I think that a solution would be to add a "Write To Spreadsheet File" in the blocks that generate values, adding a new value in the wished column in each cycle, but I do not know like doing this.
I could keep the values in two arrays and add them in a same spreadsheet in different rows or columns, but I need save values in spreadsheet in each loop and not all values at the end of cycle.
Thanks.
German Garrigos.

I think your three loops solution is probably better than putting different kinds of functions into one loop. Keeping data acquisition/generation separate from file i/o is usually better because the OS can interfere with timing on the file operations.
If you pass the data to the file loop via queues, place the data into shift registers, and only write to the file when you have equal amounts of data from each generator you should be able to keep things synchronized. You can write larger or smaller amounts as necessary to keep pace with the generators. If one of the generators gets way ahead of the other, you have to decide how to deal with that issue.
Writing to the second column of a three column spreadsheet can be tricky. It involves keeping pointers to the portions written and not written, reading the entire file into memory and overwriting the cells where new data goes and rewriting the entire file. This can get very slow for large files. If the file and data structures are simple enough it might be feasible to read only a portion of the file and overwrite it with new data, but that approach has lots of risks to the data.
Wait until next ms multiple is only reliable if the wait interval is sufficiently longer than the execution time (including random OS delays) of each loop. Look at the synchronization functions such as notifiers to synchronize your loops.
If you still have problems, post a simplified version of your program and someone will probably be able to suggest solutions.
Lynn

How to add new value in Classification under General tab via MM02.

Hello Experts,
I've a requirement where I need to add a new material variant configuration value via MM02 as highlighted below. I've also attached the screen shot of CL02, the two characteristics which I need to add (highlighted in red).
Can please anybody tell me the steps to add value in Classification under General tab via MM02.
Many thanks in advance.

zero cool,
Use transaction CL02 , open class in PCL_222_PURO_BOX with class type 300
add characterstic
PCH_COSTING_WGT_DETERM
PCH_COSTING_WGT_A_DETERM
save it.
Now use MM02 and go to classification view , now you would be able to see these characterstic there.
Check and come back.
Thanks
Ritesh

Add new values in drop down

Hi ,
I need to add new agreement types to the drop down. Please let me know how and where to add the item to get populated in the drop-down
Thanks in Advance
Tayi

HI,
You can create a value list value and point the list from extended field .
Regards
Sudipta

How do I add new photos to my external back up without duplicating the entire library?

My iPhoto libraries are a complete mess. I can't be the only person who:
a) wants a number of libraries for different types of image (digital art, holiday snaps, etc)
b) wants to keep the bulk of his library on an external drive, to free up space on my main hard drive.
One problem is that iPhoto does not show things clearly. It does not say:
a) which hard drive the currently displayed iPhoto library is in
b) which iPhoto library is currently open (at the top it just says iPhoto instead of giving a directory).
Another problem is that when I import photos from my iPhone or camera, they automatically go into the iPhoto libaray on my main hard drive; I don't seem to be asked: "To which iPhoto library do you want to import these photos?"
On top of that, whilst in some cases a pop-up asks if you really do want to add a duplicate image to a certain location, I haven't found a simple way when doing back ups to ONLY ADD NEW IMAGES to an existing library ('Apply to all' etc.)
As a result, I have loads of duplicates in different libraries, with crazy titles like: "Mostly family photos up to Sept 2010" or "Digital images to June 2012, many duplicates."
A friend recommended iPhoto Library Manager but I don't find that well laid out and haven't used it.
As I've also had difficulty upgrading my iPhoto libraries, I've started saving my photos in a regular folder (not iPhoto), with View set to large icons. I find that easier to organise.
So....Can anyone advise on a simple clear way of organising my photos and adding new ones in to the appropriate folder?
Many thanks,
Eatmorenuts

One problem is that iPhoto does not show things clearly. It does not say:
a) which hard drive the currently displayed iPhoto library is in
b) which iPhoto library is currently open (at the top it just says iPhoto instead of giving a directory).
Correct - it always uses the last selected library - If you use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to manage your libraries you do have a display showing whaih=ch library you are using
And with iPhoto '11 you can switch libraries from the file menu
You can always suggest a new feature to Apple - iPhoto manu ==> provide iPhoto feedback
Another problem is that when I import photos from my iPhone or camera, they automatically go into the iPhoto libaray on my main hard drive; I don't seem to be asked: "To which iPhoto library do you want to import these photos?"
Incorrect - when you import photo to iPhoto they always go to the currently selected library which could be any library in any valid location
On top of that, whilst in some cases a pop-up asks if you really do want to add a duplicate image to a certain location, I haven't found a simple way when doing back ups to ONLY ADD NEW IMAGES to an existing library ('Apply to all' etc.)
Not sure what you are saying - did you see the "apply to all" check box?
As a result, I have loads of duplicates in different libraries, with crazy titles like: "Mostly family photos up to Sept 2010" or "Digital images to June 2012, many duplicates."
Correct IF you do not have a good plan for managing multiple libraries and IF you do not folow it - iPhoto is a basic program designed for the mass market and knows only about the current library - it has no idea about any otehr libraries - it is far better to have only one library - but if you choose to have multiple libraries tehn you must ahve a good plan for managing them and yo must follow yoru plan - if you do not then it will not work wisince what you doing is not a feature of iPhoto
A friend recommended iPhoto Library Manager but I don't find that well laid out and haven't used it.
Well your friend made a good suggestion and it is a great product for manageing multiple libraries - but if you do not like it then you should not use it
As I've also had difficulty upgrading my iPhoto libraries, I've started saving my photos in a regular folder (not iPhoto), with View set to large icons. I find that easier to organise.
Then the question arises "why are you using iPhoto at all?" It does not work like you want, you prefer using teh finder to organize your photos and you have created a mess by trying to use iPhoto in ways it was not designed to be used - your best choice is to not use iPhotoa and do it your self the way you prefer
So....Can anyone advise on a simple clear way of organising my photos and adding new ones in to the appropriate folder?
Yes - use one library and learn how to use iPhoto (BTW in iPhoto folders do not hold photos - they only hold albums and other folders) - the solution is to have one library with multiple backups and to organize using albums, folders, Keywords and folders in the single iphoto library
Otherwise you need a different program and different workflow - what you have is not working and is almost impossible to make work - either use iPhoto the way it is designed or use a program that is designed like you want
LN
LN

Server 2010 SP2 - New values in lookup table are not updated in the user client

Hello,
I added a value to a lookup table in the PWA.
Most users see the new value in the field based on this lookup table.
One user doesn't see the update for 2 weeks now. He did close and opened the application over these 2 weeks.
Any Idea?
Thanks,
Barak

Hi Barak,
I am assuming the issue is with PWA? Has the user tried to access PWA from a different machine/browser?Other things you can try are:
- Reset IE settings
- CTRL+F5 (on the page)
If it is MS Project that doesn't have the new value, try closing MS Project and re-open it
Hope this helps
Paul

Add new values to the Domain J_1BINDUS3 CFOP category of the material

Similar Messages

Maybe you are looking for