Add new variable definition

how to add new variable definition in report painter?

Hi,
in Transaction GR32 use menu ->Report Writer -> Variable -> Create
regards
Walter Habich

Similar Messages

Add new variable in Selection ID for planning book

Hello,
Need your suggestion-
We have requirement to add new variable -like SNP Planner in SNP Selection ID of Planning book. Please suggest steps to configure this
Regards
Pandit

Pandit
There are more than one ways of doing this.
The best option is to create a freely definable attribute (Spro --- APO >> Master data >> Freely definable attributes) at material location level and now you will automatically be able to see the attribute when your create a selection id. But you have to make sure you add logic in your material cIF user exit or create a custom program in APO to populate the desired values for the freely definable attribute for all materials in the selection
Thanks
Saradha

Add new Printer definition

Hi,
We had purchase new Canon iR 2525 Printer woth dreiver UFR II LT. I had check in SPAD list but this printer definition was not there in list. I want to add new printer definition for this printer and want to load the respective drivers.
Can you please help me how to add new printer in SPAD and load its drivers?
Regards,
Nisit

Dear,
Use SPAD , click on FUll administration then choose Devices/servers then click on output devices and then add .
Please refer this thread
Re: Add Printer ??

HOW TO ADD NEW VARIABLE DATAS ON ALV REPORT

Hi gurus,
I have cretaed one alv report using
REUSE_ALV_GRID_DISPLAY.
I HAVE CALCULATED SOME TOTALS AND STORED ON
ONE VARIABLE .
that variable name is 'toterror'.
now i want to add this variable on first line OF ALV REPORT.
that is i should get LIKE THIS.
PERNR TEXT ACTION [ TITLES OF FIELDS ].THEN
TOTAL ERROR RECORDS '900'.
THEN THE CORRESPONDING FIELDS DATA SHOULD BE DISPLAYED.
HELP ME.
THANKS IN ADVANCE.

Hi
Thanks Ajeet.
The scenario is that I have to create a formula (contract end date-current date) and have to display the result using exeption to highlight the contracts ending in 30-60 days.
The problem is that the info provider does not have any infoobject for date(only valid to and validity start date)
I have created a formula variable on valid to date using replacement path. But dont have any variable to use for current date.
The only time char in the cube is Fiscal yera variant.
How should I go futher creating such formula? Shall I user customer exit variable? But I dont have any date char to create on.
Can you shed some light on this problem
Thanks

IDOC - add new field in in existing segment definition

Hi,
For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
Thanks in advance.
Rajeev

Varma,
I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
Thanks
Rajeev

How add new field in layout in RDF using XML report definition

Hi, ALL
Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

hello,
in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
regards,
the oracle reports team

Screen Exit - add new field (VBAK-VBELN) in VC01N

hi friends,
how to add new field (VBAK-VBELN) in VC01N tcode
Tcode: VC01N Sales Activity
Table: VBKA
Field: VBELN
Requirement: New field in screen ( VC01N )
Description:
Prospective projects are to be linked to the sales activities whenever they are created.
Prospective Project VA12
Table: VBAK
Field: VBELN
Doc Type: ZPRO
Doc Category: A
Place the new field VBAK-VBELN under the u2018Commentu2019n in the VC01N.
urgent plz reply
thanks and regards
Poorna
Edited by: poornambika sivaramakrishnan on Nov 21, 2008 11:28 AM

Hi...
You can definitely do it...provided if screen exit is there ...
Below is the program to find the exit whether present or not in your transaction,
Just give your tcode in the program , it will show all the exits in your transaction.
Regards
RachelArun
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
u2022     Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
u2022     Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
u2022     Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
u2022     Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

I wnat to add new fieldtext in the alv list output plz tell me

hi,
i whant add new fieldtext in the list output, plz tell me where can i modify it.
CORRECTIONS
DATE CORRECTION NOTE AUTHOR DESCRIPTION
09.03.2001 L9CK045451 0388404 XSC Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud Wrong keydate for search with
 Pchbegda and pchendda.
22.04.2004 S6BK024775 730486 PS Too many selection parameters in
 header
19.06.2006 S6BK035494 956731 JF No sorting by qualification
REPORT RHPK_FIND_PERS_WITH_EXPIRED_QU MESSAGE-ID PQ.
DATA AUFRUF(8).
TABLES : OBJEC, GDSET.
DATA LIST.
DATA MARKFIELD(1) TYPE C.
ALV_POOL
TYPE-POOLS SLIS.
INCLUDES
INCLUDE .
INCLUDE RHPEINI0.
TABLES
DATA: orgeh_BUFFER like hrobject OCCURS 1 WITH HEADER LINE.
DATA: OBJECTS LIKE HRSOBID OCCURS 1 WITH HEADER LINE.
DATA: h_OBJEC LIKE objec OCCURS 0 WITH HEADER LINE.
DATA: pers_objects LIKE HRSOBID OCCURS 1 WITH HEADER LINE.
DATA: QUALI_TAB LIKE QUALI_PROF OCCURS 1 WITH HEADER LINE.
DATA: PERSONS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: H_PERSONS LIKE HRPE_PROFL OCCURS 1 WITH HEADER LINE.
DATA: LIST_OUTPUT LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: BOOK_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: PLAN_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA H_SUITED LIKE DYNP_PCRIT-SUITED.
DATA: O_COLOR LIKE STREEATTR-COLOR.
DATA: O_INTENSIV LIKE STREEATTR-INTENSIV.
DATA SHOW_KEY.
DATA EVENT.
DATA: HTEXT LIKE P1000-STEXT.
DATA: EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: COLLECTED_EVENTS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: SUBTY_TAB LIKE HRPE_OTYPE_SUBTY OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF HIDE_STRU,
 PERSTYPE LIKE HROTYPE-OTYPE,
 PERSOBID LIKE HRSOBID-SOBID,
 PERSTXT LIKE PERSQ_PROF-STEXT,
 SCALE_ID LIKE HRPE_PROFQ-SCALE_ID,
 TRAININGTYPE LIKE HRP1000-OTYPE,
 TRAININGID LIKE HRP1000-OBJID,
 TRAININGSTXT LIKE HRP1000-STEXT,
 QUALID LIKE QUALI_PROF-QUALID,
 QUALTEXT LIKE QUALI_PROF-QUALSTXT,
 END OF HIDE_STRU.
DATA: BEGIN OF EXTAB OCCURS 10,
 FCODE LIKE RSMPE-FUNC,
 END OF EXTAB.
DATA: CURRENT_QUALID LIKE QUALI_PROF-QUALID.
DATA: CURRENT_TRAININGSID LIKE HRP1000-OBJID.
DATA: CURRENT_TRAININGTYPE LIKE HRP1000-OTYPE.
DATA: SUBRC LIKE SY-SUBRC.
VARIABLES
DATA: OBJID LIKE P1000-OBJID.
DATA: H_LINE_COUNT TYPE I.
DATA: H_TABIX1 LIKE SY-TABIX.
ALV-Variables
DATA: alv_events_line TYPE slis_alv_event. "header line
DATA ALV_EVENTS TYPE SLIS_T_EVENT.
DATA GT_ALV_LIST_TOP_OF_LIST TYPE SLIS_T_LISTHEADER.
DATA: gt_events TYPE SLIS_T_EVENT.
DATA G_REPID LIKE SY-REPID.
DATA G_VARIANT LIKE DISVARIANT.
DATA ALV_USERCOMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA G_USERCOMMAND_FOR_RANKINGLIST TYPE SLIS_FORMNAME VALUE
'USER_COMMAND_FOR_RANKINGLIST'.
DATA ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
DATA: Help_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
begin of Dynpro 5020 - POPUP: WEITER
DATA: OK_CODE_5020 LIKE SY-UCOMM.
DATA: NO_ORG. "if no org selected
DATA: H_TABIX LIKE SY-TABIX.
begin of Dynpro 20nn - Header
TABLES: DYNP_RHPP.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-005.
PARAMETERS:
 H_EVENTS LIKE DYNP_RHPP-GEN_TRAIN, "with training sugg
 H_QUAL LIKE DYNP_RHPP-EXPIRED_QUAL. "with Qual
SELECTION-SCREEN END OF BLOCK B3.
INITIALIZATION
INITIALIZATION.
PERFORM READ_T77S0_PARAMETERS_FOR_PE.
get user parameters/Planvariante und Beginndatum setzen:
PCHOTYPE = $ORGEH.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
 EXPORTING
 FILL_IF_INITIAL = 'X'
 IMPORTING
 PLVAR = PCHPLVAR
 BEGDA = PCHBEGDA
 endda = Pchendda "Correction 0410219
 WITH_KEY = SHOW_KEY
 SUBSTITUTE =
 ESSENTIAL = only_essential
 ORG_UNIT = PCHOBJID-LOW
 EXCEPTIONS
 OTHERS = 0.
PCHBEGDA = LOW_DATE. "Correction note: 0410219 / AL0K023393
get menu text for key on/off
PERFORM USER_MENU_TEXT_KEY(SAPLRHP0) USING G_MENU_TEXT_KEY.
start-of-selection
START-OF-SELECTION.
terminate the selection if objid isn't given
READ TABLE PCHOBJID INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0
AND PCHOBJID IS INITIAL.
 PCHOBJID-SIGN = 'I'.
 PCHOBJID-OPTION = 'EQ'.
 PCHOBJID-LOW = '00000001'.
 APPEND PCHOBJID.
 NO_ORG = TRUE.
ELSE.
 NO_ORG = FALSE.
ENDIF.
GET OBJEC.
terminate the selection if objid isn't given
IF NO_ORG = TRUE.
 EXIT.
ENDIF.
OBJECTS-PLVAR = PCHPLVAR.
OBJECTS-OTYPE = PCHOTYPE.
OBJECTS-SOBID = OBJEC-REALO.
APPEND OBJECTS.
Für das lesen der Organisationseinheit
h_OBJEC-PLVAR = OBJEC-PLVAR.
h_OBJEC-OTYPE = OBJEC-OTYPE.
h_OBJEC-OBJID = OBJEC-objid.
append h_objec.
Read table h_objec index 1 transporting no fields.
if sy-subrc = 0.
Fill Buffer
 orgeh_BUFFER = h_OBJEC.
 orgeh_BUFFER[] = h_OBJEC[].
 CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
 TABLES
 OBJECTS = orgeh_BUFFER.
 Loop at h_OBJEC.
 H_TABIX = SY-TABIX.
Read text of organisation
 CALL FUNCTION 'RH_READ_OBJECT'
 EXPORTING
 PLVAR = h_OBJEC-plvar
 OTYPE = h_OBJEC-otype
 OBJID = h_OBJEC-OBJID
 IMPORTING
 OBEG = h_objec-begda
 OEND = h_objec-endda
 SHORT = short
 STEXT = h_OBJEC-stext
 EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2.
 IF SY-SUBRC = 0.
 modify h_OBJEC index H_TABIX.
 ENDIF.
 endloop.
endif.
end-of-selection
END-OF-SELECTION.
read objects of the organizational unit
OBJID = OBJECTS-SOBID.
CALL FUNCTION 'RHPH_PICK_UP_PERSONS'
 EXPORTING
 BEGDA = PCHBEGDA "Correction 0410219
 ENDDA = PCHENDDA "Correction 0410219
 STATUS = '1'
 WITH_STEXT = 'X'
 TABLES
 OBJECTS = OBJECTS
 PERSONS = H_PERSONS
 EXCEPTIONS
 UNDEFINED = 1
 OTHERS = 2.
IF SY-SUBRC = 0.
prepare objects !
 objects-otype = h_persons-ttype.
 objects-sobid = h_persons-tobid.
 append objects.
ELSE.
 EXIT.
ENDIF.
CLEAR OBJECTS. REFRESH OBJECTS.
prepare sel_objects !
pers_objects-PLVAR = PCHPLVAR.
LOOP AT H_PERSONS.
 pers_objects-OTYPE = H_PERSONS-TTYPE.
 pers_objects-SOBID = H_PERSONS-TOBID.
 APPEND pers_objects.
ENDLOOP.
sort objects and delete adjacent duplicates
SORT Pers_OBJECTS BY PLVAR OTYPE SOBID.
DELETE ADJACENT DUPLICATES FROM Pers_OBJECTS COMPARING PLVAR OTYPE
SOBID.
CALL FUNCTION 'RHPK_FIND_PERS_WITH_EXPIRED_Q'
 EXPORTING
 PLVAR = PCHPLVAR
 CHECK_BEGDA = PCHBEGDA
 CHECK_ENDDA = PCHENDDA
 SUBTY = $ownsb "'B032'
 only_essential =
 target_otype =
 target_ap_iea =
 TABLES
 IMP_PER_TAB = pers_objects
 QUALI_TAB = QUALI_TAB
 PERSONS = LIST_OUTPUT
 altq_tab =
 EXCEPTIONS
 NO_QUALIFICATION = 1
 NO_PERSON_FOUND = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
100% case
READ TABLE pers_objects INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC = 0.
 sort pers_objects by otype sobid.
check the selected persons: if org.unit was selected !
 Loop at pers_objects.
 H_TABIX = SY-TABIX.
 READ TABLE LIST_OUTPUT WITH KEY OTYPE = pers_objects-OTYPE
 SOBID = pers_objects-SOBID
 BINARY SEARCH.
 IF SY-SUBRC <> 0.
 person doesn't belong to the selected org.unit
 DELETE LIST_OUTPUT INDEX H_TABIX.
 ENDIF.
 ENDLOOP.
ENDIF. "org.unit check needed ?
end-of-selection.
sort h_objec by otype objid.
sort list_output by otype sobid.
sort h_persons by ttype tobid.
ALV-Liste aufbauen
loop at h_objec.
 loop at h_persons where otype = h_objec-otype "XSC
 and sobid = h_objec-objid. "XSC
 Read table list_output with key
 otype = h_persons-ttype
 sobid = h_persons-tobid
 binary search.
 if sy-subrc = 0.
 h_tabix1 = sy-tabix.
 while sy-subrc = 0.
 clear alv_output. "XSC
 ALV_OUTPUT-otype = h_objec-otype.
 ALV_OUTPUT-sobid = h_objec-objid.
 ALV_OUTPUT-stext = h_objec-stext.
 ALV_OUTPUT-Ptype = LIST_OUTPUT-otype.
 ALV_OUTPUT-pobid = LIST_OUTPUT-sobid.
 ALV_OUTPUT-pshort = LIST_OUTPUT-short.
 ALV_OUTPUT-ptext = LIST_OUTPUT-stext.
 ALV_OUTPUT-qualid = LIST_OUTPUT-qualid.
 ALV_OUTPUT-qualstxt = LIST_OUTPUT-qualstxt.
 ALV_OUTPUT-expbegda = LIST_OUTPUT-vbegda.
 ALV_OUTPUT-expendda = LIST_OUTPUT-vendda.
 PERFORM FIND_TRAINING TABLES QUALI_TAB EVENT_TAB COLLECTED_EVENTS
 USING $PLVAR $GDATE H_EVENTS H_QUAL.
 IF NOT EVENT_TAB[] IS INITIAL.
 READ TABLE COLLECTED_EVENTS WITH KEY
 QUALID = LIST_OUTPUT-QUALID.
 IF SY-SUBRC = 0.
 ALV_OUTPUT-ICON_S_EVENTS = ICON_BOOKEVENT.
 endif.
 ENDIF.
 Append ALV_OUTPUT.
 h_tabix1 = h_tabix1 + 1.
 READ TABLE list_output INDEX h_tabix1
 COMPARING otype sobid.
 endwhile.
 endif.
 endloop.
endloop.
check if indicator for qualification view is set
IF h_qual = 'X'. "note 956731
 SORT alv_output by qualid OTYPE SOBID ptype pobid "note 956731
 expbegda expendda. "note 956731
ELSE. "note 956731
 SORT alv_output by OTYPE SOBID ptype pobid qualid expbegda expendda.
ENDIF. "note 956731
DELETE ADJACENT DUPLICATES FROM ALV_OUTPUT COMPARING OTYPE SOBID ptype
 pobid qualid expbegda expendda.
stext_AQ und icon-Feld noch nicht gefüllt
 perform PREPARE_TOP_OF_LIST.
 perform Build_FIELDCAT using GT_FIELDCAT[] H_EVENTS.
 perform ALV_LAYOUT USING alv_layout.
 G_REPID = SY-REPID.
 G_VARIANT-REPORT = G_REPID.
 PERFORM EVENTTAB_BUILD USING GT_EVENTS.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = 'X'
 I_CALLBACK_PROGRAM = G_REPID
 I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = ALV_USERCOMMAND
 I_STRUCTURE_NAME = 'HRPDV_EXPIRED_Q'
 IS_LAYOUT = ALV_LAYOUT
 IT_FIELDCAT = GT_FIELDCAT[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = 'A'
 IS_VARIANT = G_VARIANT
 IT_EVENTS = GT_EVENTS
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = ALV_OUTPUT
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2 .
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*& Form FIND_TRAINING
 text
 -->P_QUALI_TAB text
 -->P_EVENT_TAB text
 -->P_$PLVAR text
 -->P_GDATE text
 -->P_H_EVENT text
 -->P_H_QUAL text
FORM FIND_TRAINING TABLES P_QUALI_TAB STRUCTURE QUALI_TAB
 P_EVENT_TAB STRUCTURE EVENT_TAB
 P_COLLECTED_EVENTS STRUCTURE COLLECTED_EVENTS
 USING VALUE(P_$PLVAR) LIKE P1000-PLVAR
 VALUE(P_GDATE) LIKE P1000-GDATE
 VALUE(P_H_EVENT) TYPE ANY
 VALUE(P_H_QUAL) TYPE ANY.
IF NOT P_H_EVENT IS INITIAL.
 READ TABLE EVENT_TAB INDEX 1 TRANSPORTING NO FIELDS.
 IF SY-SUBRC <> 0.
 CLEAR P_EVENT_TAB. REFRESH EVENT_TAB.
 CLEAR P_COLLECTED_EVENTS. REFRESH P_COLLECTED_EVENTS.
 IF EVENT = FALSE.
 EVENT = TRUE.
 ELSE.
 EVENT = FALSE.
 ENDIF.
 CALL FUNCTION 'RHPH_FIND_TRAINING_FOR_QUAL'
 EXPORTING
 PLVAR = PCHPLVAR
 GDATE = SY-DATUM
 GET_NAME = 'X'
 TABLES
 QUALI_TAB = QUALI_TAB
 TO_Q_TAB = EVENT_TAB
 EXCEPTIONS
 NO_QUALIFICATION = 1
 NO_OBJECT_FOUND = 2
 TECHNICAL_ERROR = 3
 OTHERS = 4.
 IF SY-SUBRC = 0.
the found qualifications are picked up into table event_tab
 ENDIF.
 IF SY-SUBRC = 1.
 MESSAGE S015. "Zu den Eingaben wurden keine Daten gefunden
 ENDIF.
 IF SY-SUBRC > 2.
 EXIT.
 ENDIF.
collect events when there are double.
Veranstaltungen kollektieren, Können mehrfach auftauchen, da
verschiedenen Qualifikationen von gleichen Veranstaltungen vermittelt
 LOOP AT P_EVENT_TAB INTO P_COLLECTED_EVENTS.
 APPEND P_COLLECTED_EVENTS.
 ENDLOOP.
 SORT P_COLLECTED_EVENTS BY QUALID STEXT.
 ENDIF.
ENDIF.
ENDFORM. " FIND_TRAINING
*& Form PREPARE_TOP_OF_LIST
 text
--> p1 text
<-- p2 text
FORM PREPARE_TOP_OF_LIST.
DATA ALV_TOP_OF_LIST TYPE SLIS_LISTHEADER. "typ, key, info
DATA STEXT LIKE HRPDV_SUCCESSOR_VIEW-TTEXT.
DATA P_SUBRC LIKE SY-SUBRC.
DATA P_STEXT LIKE T777O-OTEXT.
DATA l_tabix like sy-tabix value 0.
DATA: h_counter TYPE i. "note 730486
ALV_TOP_OF_LIST-TYP = 'H'.
ALV_TOP_OF_LIST-INFO = TEXT-REQ.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
Organisationseinheit
ALV_TOP_OF_LIST-typ = 'S'.
Read text for organisationunit
PERFORM READ_TEXT_OTYPE_T777O(SAPLRHP0) USING SY-LANGU $ORGEH
 P_STEXT P_SUBRC.
ALV_TOP_OF_LIST-key = P_STEXT.
fill buffer for read organisation-text
CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
 EXPORTING
 CHECK_STRU_AUTH = 'X'
 WITH_EXTINT = ' '
 TABLES
 OBJECTS = OBJECTS.
loop at objects for multipleselection
clear h_counter. "note 730486
LOOP AT OBJECTS.
 $OBJID = OBJECTS-SOBID.
 CALL FUNCTION 'RH_READ_OBJECT'
 EXPORTING
 PLVAR = OBJECTS-PLVAR
 OTYPE = OBJECTS-OTYPE
 OBJID = $OBJID
 IMPORTING
 SHORT = short
 STEXT = STEXT
 EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 IF h_counter >= 15. "note 730486
 MOVE '( ... )' TO ALV_TOP_OF_LIST-INFO. "note 730486
 APPEND ALV_TOP_OF_LIST TO gt_alv_list_top_of_list.
 "note 730486
 EXIT. "note 730486
 ENDIF. "note 730486
 CONCATENATE $ORGEH OBJECTS-SOBID STEXT INTO
 ALV_TOP_OF_LIST-INFO SEPARATED BY SPACE.
 APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
 CLEAR ALV_TOP_OF_LIST.
 ALV_TOP_OF_LIST-typ = 'S'.
 l_tabix = l_tabix + 1.
 ADD 1 TO h_counter. "note 730486
ENDLOOP.
CLEAR ALV_TOP_OF_LIST.
ALV_TOP_OF_LIST-TYP = 'S'.
ALV_TOP_OF_LIST-key = TEXT-003.
WRITE PCHBEGDA TO ALV_TOP_OF_LIST-INFO.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
clear ALV_TOP_OF_LIST-INFO.
ALV_TOP_OF_LIST-key = TEXT-004.
WRITE PCHENDDA TO ALV_TOP_OF_LIST-INFO.
Append ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
ENDFORM. " PREPARE_TOP_OF_LIST
*& Form BUILD_FIELDCAT
 text
 -->P_GT_FIELDCAT[] text
FORM BUILD_FIELDCAT USING P_GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
 P_H_EVENTS.
DATA: WA_FIELDCAT LIKE LINE OF P_GT_FIELDCAT.
DATA: P_REPNAME LIKE SY-REPID,
 L_TABIX LIKE SY-TABIX. "local variable for sy-tabix.
P_REPNAME = SY-REPID.
Erstellen des Feldkataloges
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = P_REPNAME
 I_INTERNAL_TABNAME =
 I_STRUCTURE_NAME = 'HRPDV_EXPIRED_Q'
 I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = PRONAME
 CHANGING
 CT_FIELDCAT = P_GT_FIELDCAT
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 0
 PROGRAM_ERROR = 0
 OTHERS = 0.
LOOP AT P_GT_FIELDCAT INTO WA_FIELDCAT.
 l_tabix = sy-tabix.
 CASE WA_FIELDCAT-FIELDNAME.
 when 'OTYPE'.
 WA_FIELDCAT-DDICTXT = 'L'.
 when 'SOBID'.
 WA_FIELDCAT-DDICTXT = 'L'.
 WHEN 'STEXT'.
 WA_FIELDCAT-DDICTXT = 'L'.
 when 'PTYPE'.
 WA_FIELDCAT-DDICTXT = 'L'.
 when 'POBID'.
 WA_FIELDCAT-DDICTXT = 'L'.
 when 'PSHORT'.
 WA_FIELDCAT-DDICTXT = 'L'.
 WHEN 'PTEXT'.
 WA_FIELDCAT-DDICTXT = 'L'.
 WHEN 'QUALID'.
 WA_FIELDCAT-DDICTXT = 'L'.
 WHEN 'QUALSTXT'.
 WA_FIELDCAT-DDICTXT = 'L'.
 WHEN 'EXPBEGDA'.
 WA_FIELDCAT-DDICTXT = 'L'.
 WHEN 'EXPENDDA'.
 WA_FIELDCAT-DDICTXT = 'L'.
 WHEN 'ICON_S_EVENTS'.
 IF P_H_EVENTS IS INITIAL.
 WA_FIELDCAT-NO_OUT = 'X'.
 else.
 WA_FIELDCAT-DDICTXT = 'X'.
 endif.
 ENDCASE.
 MODIFY P_GT_FIELDCAT FROM WA_FIELDCAT INDEX l_tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCAT
*& Form ALV_LAYOUT
 text
 -->P_L_ALV_LAYOUT text
FORM ALV_LAYOUT USING P_ALV_LAYOUT TYPE slis_layout_alv.
build layout
P_LAYOUT-BOX_FIELDNAME = 'MARK_X'. "fieldname for checkbox
P_ALV_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
P_ALV_LAYOUT-BOX_TABNAME = ALV_OUTPUT. "tabname for checkbox
p_ALV_layout-info_fieldname = 'ALV_COLOR'.
ENDFORM. " ALV_LAYOUT
FORM eventtab_build USING
FORM EVENTTAB_BUILD USING RT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
APPEND LS_EVENT TO RT_EVENTS.
ENDFORM. "EVENTTAB_BUILD
*FORM TOP_OF_PAGE
FORM TOP_OF_PAGE. "#EC CALLED
NEW-PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = GT_ALV_LIST_TOP_OF_LIST[].
ENDFORM. "TOP_OF_PAGE
 FORM USER_COMMAND *
USER_COMMAND for the list of successor view *
--> r_ucomm *
--> rs_selfield *
FORM USER_COMMAND USING ALV_UCOMM LIKE SY-UCOMM
 RS_SELFIELD TYPE SLIS_SELFIELD. "#EC CALLED
DATA: SELECTED_LINE LIKE HRPDV_expired_q.
DATA: SOBID_QUA LIKE P1000-OBJID.
DATA: LT_PERS_TAB LIKE HRSOBID OCCURS 0 WITH HEADER LINE.
CASE ALV_UCOMM.
 WHEN '&IC1'. "per Doppelklick auswählen
 READ TABLE ALV_OUTPUT INDEX
 RS_SELFIELD-TABINDEX INTO SELECTED_LINE.
 CASE RS_SELFIELD-FIELDNAME.
 WHEN 'POTYPE' or 'POBID' or 'PTEXT' or 'OTYPE' or 'SOBID' or
'STEXT' or 'QUALID' or 'QUALSTXT' or 'EXPBEGDA' or 'EXPENDDA'.
 READ TABLE ALV_OUTPUT INDEX RS_SELFIELD-TABINDEX INTO
 Help_output.
 IF SY-SUBRC <> 0.
 MESSAGE S027. "Bitte gültige Zeile auswählen
 EXIT.
 Endif.
 IF ALV_OUTPUT-SOBID IS INITIAL.
 MESSAGE S015. "Zu den Eingaben wurden keine Daten gefunden
 ELSE.
 converte the variable because of the different types
 SOBID_QUA = SELECTED_LINE-SOBID_QUA.
 CALL FUNCTION 'RHPP_SHOW_PROFILE'
 EXPORTING
 PLVAR = pchplvar
 OTYPE = SELECTED_LINE-PTYPE "XSC
 OBJID = SELECTED_LINE-POBID "XSC
 BEGDA = PCHBEGDA
 ENDDA = PCHENDDA
 MAINTAIN = ' '
 EXCEPTIONS
 NO_AUTHORITY = 1
 NOT_FOUND = 2
 OTHERS = 3.
 CASE SY-SUBRC.
 WHEN 0.
 All right.
 WHEN 1.
 MESSAGE S015.
 Zu Ihren Eingaben konnten keine Daten gefunden werden!
 WHEN 2.
 MESSAGE E000.
 Dazu haben sie keine berechtigung!
 WHEN OTHERS.
 MESSAGE E008.
 Es ist ein unvorhergesehener Fehler aufgetreten.
 ENDCASE. "sy-subrc.
 CLEAR ALV_OUTPUT.
 ENDIF. "IF ALV_OUTPUT-SOBID IS INITIAL.
 CLEAR ALV_OUTPUT-SOBID.
 when 'ICON_S_EVENTS'.
 IF SELECTED_LINE-ICON_S_EVENTS IS INITIAL.
 MESSAGE S027. "Bitte gültige Zeile auswählen
 EXIT.
 ENDIF.
 CLEAR LT_PERS_TAB.
 REFRESH LT_PERS_TAB.
 LT_PERS_TAB-PLVAR = pchPLVAR.
 LT_PERS_TAB-OTYPE = SELECTED_LINE-PTYPE. "XSC
 LT_PERS_TAB-SOBID = SELECTED_LINE-POBID. "XSC
 APPEND LT_PERS_TAB.
 SOBID_QUA = SELECTED_LINE-QUALID.
 CALL FUNCTION 'RHPP_SHOW_SUGGEST_EVENTS'
 EXPORTING
 P_PLVAR = pchPLVAR
 P_SOBID_QUA = SOBID_QUA
 P_PROFCY_REQ = SELECTED_LINE-RATING_REQ
 P_GDATE = sy-datum
 TABLES
 EVENT_TAB =
 PERS_TAB = LT_PERS_TAB.
 endcase.
 CLEAR SELECTED_LINE.
ENDCASE. "case sy-ucomm
CLEAR SY-UCOMM.
ENDFORM. "USER_COMMAND

Pls be more specific in your question. If you want to include an extra field in your alv output, then read the field catalog table you created through "Reuse_alv_fieldcatalog_merge" and then add an extra entry in it giving the details of the field you want to add.. and then call the "resuse_alv_grid_display",
Hope this helps. To be able to help you in a better way, kindly revert with any specific issue.
Reward if helpful,
Karan

Address book model is not respected when I add new fields

Hello,
If I add new fields in the model of my adress book. AddressBook display does not comply with the specified model.
For example, after father, mother and joint, I added the following fields child 1, grand-child 1, child 2, grand-child 2, child 3, grand-child 3, child 4, grand-child 4, in order to have descendants of my friend or family.
The result is :
child 3 : Oscar
child 4 : Anatole
child 2 : Victor
child 5 : Constantin
child 1 : Aline
Please note that I entered the 5 children in the good order : Aline, Victor, Oscar, Anatole, Constantin.
An other example can be completely different with children and grand-children mixed !
To be complete, I can say that in Mac OS X 10.4 address book was running correctly, but is no longer running in 10.5 nor 10.6.7
Best regards
Bergama

The iPad can't be infected with a virus - by the definition of a virus being a malicious program that replicates itself across your operating system and other programs. It can be infected with malware, however that usually only happens when a user taps on a link, or actively does something.
Since the iPad can't run flash or java (?)(all or most kinds of java) then it's relatively secure.
You're probably fine.
The iPad's operating system is different enough from Mac's or PC's that even if you do tap on a virus it can't run...the malicious code is speaking a language that the iPad can't understand.

How do I add a variable into an object as xml

I have a xml document with 2 protection order numbers. I want to get the information for one of them which is **protectionOrderNumber="1400042"**. I would like to add strPoNumber variable to the object objXmlCaseDoc. Inside this object is the xml
that was read and put inside the object. I want at the beginning of the xml code inside the objXmlCaseDoc to add the protectionOrderNumber at the end of the first line. This should be added at the beginning of the xml document. In my object (objXmlCaseDoc)
there is no variable strPoNumber. This is why I want to add it at the top. The object has xml document in it.
It should look like this:
<Integration xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:tsg="http://tsgweb.com" xmlns:IXML="http://tsgweb.com" xmlns:CMCodeQueryHelper="urn:CMCodeQueryHelper" protectionOrderNumber="1400042">
My vb code: I have the variable strPoNumber and the object where the xml document is. Object name is objXmlCaseDoc
I want to add the line of code where I have comment Tranform case information into the output format near the bottom of the code.
Option Strict On
Option Explicit On
Imports System.Xml
Public Class BcaPoRequests
Shared Sub Main()
Dim objMessageProcessor As New MessageProcessor
Dim objSchemasCollection As New Msc.Integration.MessageBroker.Library.v4.SchemasCollection
Dim objTransformsCollection As New Msc.Integration.MessageBroker.Library.v4.TransformsCollection
objMessageProcessor.ProcessInputQueue(False, False, objSchemasCollection, objTransformsCollection)
End Sub
Private Class MessageProcessor
Inherits Msc.Integration.ServiceCatalog.Library.v4.SoapMessageProcessor
Protected Overrides Sub ProcessMessage(ByRef aobjBroker As ServiceCatalog.Library.v4.Broker, ByRef aobjXMLInputSoapEnvelopeDoc As System.Xml.XmlDocument, ByRef aobjInstantiatedObjectsCstrollection As Microsoft.VisualBasic.Collection, ByRef aobjConsumer As ServiceCatalog.Library.v4.Consumer)
MyBase.ProcessMessage(aobjBroker, aobjXMLInputSoapEnvelopeDoc, aobjInstantiatedObjectsCollection, aobjConsumer)
Dim objXmlMessageDoc As XmlDocument
Dim objXmlMessageNode As XmlNode
Dim objNameTable As NameTable
Dim objXMLNameSpaceManager As XmlNamespaceManager
Dim objXMLSchemaException As Xml.Schema.XmlSchemaException
Dim strCaseNumber As String
Dim strPoNumber As String
Dim objXmlCaseDoc As XmlDocument
'create a namespace manager used for queries into inputmessage (because of namespace)
objNameTable = New NameTable
objXMLNameSpaceManager = New XmlNamespaceManager(objNameTable)
objXMLNameSpaceManager.AddNamespace("ext", "http://www.courts.state.mn.us/ProtectionOrderExtension/1.0")
objXMLNameSpaceManager.AddNamespace("exc", "http://www.courts.state.mn.us/ProtectionOrderQuery/1.0")
objXMLNameSpaceManager.AddNamespace("soap", "http://www.w3.org/2003/05/soap-envelope")
objXMLNameSpaceManager.AddNamespace("wsa", "http://schemas.xmlsoap.org/ws/2004/08/addressing")
objXmlMessageNode = aobjXMLInputSoapEnvelopeDoc.DocumentElement.SelectSingleNode("soap:Body/exc:ProtectionOrderQueryRequest", objXMLNameSpaceManager)
objXmlMessageDoc = New XmlDocument
objXmlMessageDoc.LoadXml(objXmlMessageNode.OuterXml)
'Check authorization
'Validate the input message
objXMLSchemaException = aobjBroker.ValidateXmlDocument(objXmlMessageDoc, "ProtectionOrderQuery_1_0.xsd", "NiemExchanges\ProtectionOrders\Exchange", , False)
If Not objXMLSchemaException Is Nothing Then
'return fault if invalid
aobjBroker.Reply(aobjBroker.CreateSoapFault(Msc.Integration.Utility.Library.v4.Soap.udtSoapCodes.Sender, Msc.Integration.Utility.Library.v4.Xml.FormatXmlSchemaValidationErrorText(objXMLSchemaException), Msc.Integration.Utility.Library.v4.Soap.udtSoapRoles.RoleUltimateReceiver, aobjXMLInputSoapEnvelopeDoc, "soap:InvalidMessage", "soap:Body", Msc.Integration.Utility.Library.v4.Soap.GetReplyEndpointReference(aobjXMLInputSoapEnvelopeDoc), aobjXMLInputSoapEnvelopeDoc.DocumentElement.SelectSingleNode("soap:Header/wsa:MessageID", objXMLNameSpaceManager).InnerText, aobjConsumer))
Exit Sub
End If
'Get the case number and the PO number from the input message
strCaseNumber = objXmlMessageDoc.DocumentElement.SelectSingleNode("ext:CourtFileNumber", objXMLNameSpaceManager).InnerText
strPoNumber = objXmlMessageDoc.DocumentElement.SelectSingleNode("ext:ProtectionOrderID", objXMLNameSpaceManager).InnerText
'Get the case information from Mncis
'Code for calling the case
objXmlCaseDoc = Msc.Integration.Mncis.Library.v4.Case.GetIxmlForCaseNumber(strCaseNumber, "CourtCaseHeader,ProtectionOrder,SubjectParties,HearingTrialSetting", False)
'Tranform case information into the output format
End Sub
End Class
End Class
xslt code
<?xml version="1.0" encoding="UTF-8"?>
<?altova_samplexml file:///Z:/Training%20with%20Tim%20XML%20code%20various/BcaRequestIxml.xml?>
<xsl:stylesheet version="3.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:fn="http://www.w3.org/2005/xpath-functions" xmlns:poq="http://www.courts.state.mn.us/ProtectionOrderQuery/1.0" xmlns:ext="http://www.courts.state.mn.us/ProtectionOrderExtension/1.0" xmlns:nc="http://niem.gov/niem/niem-core/2.0" xmlns:j="http://niem.gov/niem/domains/jxdm/4.1" xmlns:mscef="courts.state.mn.us/extfun" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:exsl="urn:schemas-microsoft-com:xslt" extension-element-prefixes="exsl" exclude-result-prefixes="mscef msxsl exsl">
<xsl:import href="../General/ExtensionFunctions.xsl"/>
<xsl:import href="MNCIS_PO_BCA_ProtectionOrder_1_0.xsl"/>
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>

<xsl:param name="gEnvPath">../..</xsl:param>
<xsl:template match="/">
<xsl:variable name="vPoNumber">
<xsl:value-of select="Integration/@protectionOrderNumber"/>
</xsl:variable>
<poq:ProtectionOrderQueryResponse>
<xsl:for-each select="//Integration/ProtectionOrder[ProtectionOrderNumber=$vPoNumber]">
<xsl:call-template name="ProtectionOrder"/>
</xsl:for-each>
</poq:ProtectionOrderQueryResponse>
</xsl:template>
</xsl:stylesheet>
XML document output from my xslt code
<?xml version="1.0" encoding="UTF-8"?>
<poq:ProtectionOrderQueryResponse xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:fn="http://www.w3.org/2005/xpath-functions" xmlns:poq="http://www.courts.state.mn.us/ProtectionOrderQuery/1.0" xmlns:ext="http://www.courts.state.mn.us/ProtectionOrderExtension/1.0" xmlns:nc="http://niem.gov/niem/niem-core/2.0" xmlns:j="http://niem.gov/niem/domains/jxdm/4.1">
<ext:ProtectionOrder xmlns:exc="http://www.courts.state.mn.us/ProtectionOrderServiceExchange/1.0" xmlns:s="http://niem.gov/niem/structures/2.0" xmlns:usps="http://niem.gov/niem/usps_states/2.0">
<j:CourtOrderEnforcementAgency>
<nc:OrganizationIdentification>
<nc:IdentificationID>MN0700000</nc:IdentificationID>
</nc:OrganizationIdentification>
</j:CourtOrderEnforcementAgency>
<ext:ForeignOrderIdentification>
<nc:IdentificationID/>
<ext:ForeignOrderIdentificationTypeCode/>
</ext:ForeignOrderIdentification>
<ext:HearingHeldIndicator>false</ext:HearingHeldIndicator>
<nc:Location s:id="DB1618611387">
<nc:LocationAddress>
<nc:StructuredAddress>
<nc:LocationStreet>
<nc:StreetFullText>3434 Bohnsack Way</nc:StreetFullText>
<nc:StreetFullText>Unit 75 B</nc:StreetFullText>
<nc:StreetFullText/>
</nc:LocationStreet>
<nc:LocationCityName>New Prague</nc:LocationCityName>
<nc:LocationStateUSPostalServiceCode>MN</nc:LocationStateUSPostalServiceCode>
<nc:LocationPostalCode>56071</nc:LocationPostalCode>
</nc:StructuredAddress>
</nc:LocationAddress>
</nc:Location>
<ext:ProtectedParty>
<ext:PersonBirthDate ext:approximateDateIndicator="false" ext:currentIndicator="true">1987-11-21</ext:PersonBirthDate>
<nc:PersonName>
<nc:PersonGivenName>Jennifer</nc:PersonGivenName>
<nc:PersonMiddleName>Marie</nc:PersonMiddleName>
<nc:PersonSurName>O'Brien</nc:PersonSurName>
<nc:PersonNameSuffixText/>
<nc:PersonFullName>O'Brien, Jennifer Marie</nc:PersonFullName>
</nc:PersonName>
<ext:PersonRaceCode/>
<nc:PersonSexCode>F</nc:PersonSexCode>
<ext:PetitionerIndicator>true</ext:PetitionerIndicator>
</ext:ProtectedParty>
<ext:ProtectedParty>
<ext:PersonBirthDate ext:approximateDateIndicator="false" ext:currentIndicator="true">2008-03-24</ext:PersonBirthDate>
<nc:PersonName>
<nc:PersonGivenName>Eli</nc:PersonGivenName>
<nc:PersonMiddleName>Rose</nc:PersonMiddleName>
<nc:PersonSurName>Noir</nc:PersonSurName>
<nc:PersonNameSuffixText/>
<nc:PersonFullName>Noir, Eli Rose</nc:PersonFullName>
</nc:PersonName>
<ext:PersonRaceCode/>
<nc:PersonSexCode>F</nc:PersonSexCode>
<ext:PetitionerIndicator>false</ext:PetitionerIndicator>
</ext:ProtectedParty>
<ext:ProtectionOrderBradyIndicator>N</ext:ProtectionOrderBradyIndicator>
<ext:ProtectionOrderCondition>
<ext:ConditionText>Respondent must not have any contact with the Protected Person(s) whether in person, with or through other persons, by telephone, mail, e-mail, through electronic devices, social media, or by any other means except as follows: [] </ext:ConditionText>
<ext:ConditionCode>08</ext:ConditionCode>
</ext:ProtectionOrderCondition>
<ext:ProtectionOrderCondition>
<ext:ConditionText>Respondent must stay a reasonable distance away from the residence(s) of the Protected Person(s), specifically as follows: [distance]; and Respondent must stay a reasonable distance away from ANY FUTURE RESIDENCES of the Protected Person(s). </ext:ConditionText>
<ext:ConditionCode>04</ext:ConditionCode>
</ext:ProtectionOrderCondition>
<ext:ProtectionOrderCondition>
<ext:ConditionText>Respondent shall not call or enter Petitioner's place of employment which includes all land, parking lots, and buildings at: </ext:ConditionText>
<ext:ConditionCode>04</ext:ConditionCode>
</ext:ProtectionOrderCondition>
<ext:ProtectionOrderExpirationDate>2015-12-22</ext:ProtectionOrderExpirationDate>
<ext:ProtectionOrderFinding>
<ext:FindingText>Respondent personally appeared or had reasonable notice and opportunity to be heard. The procedures for service upon Respondent set forth in the Minnesota Domestic Abuse Act (Minn.Stat. 518B.01) were followed, and the court has jurisdiction over the parties and subject matter. </ext:FindingText>
<ext:FindingCode>OAH1</ext:FindingCode>
</ext:ProtectionOrderFinding>
<ext:ProtectionOrderFinding>
<ext:FindingText>Acts of domestic abuse have occurred, including the following: [] </ext:FindingText>
<ext:FindingCode>OAH4A</ext:FindingCode>
</ext:ProtectionOrderFinding>
<ext:ProtectionOrderID>1400042</ext:ProtectionOrderID>
<ext:ProtectionOrderIssuingCourt>
<nc:OrganizationIdentification>
<nc:IdentificationID>MN070015J</nc:IdentificationID>
</nc:OrganizationIdentification>
<ext:CourtFaxNumber>
<nc:TelephoneNumberFullID>952-496-8211</nc:TelephoneNumberFullID>
</ext:CourtFaxNumber>
<ext:CourtTelephoneNumber>
<nc:TelephoneNumberFullID>952-496-8200</nc:TelephoneNumberFullID>
<nc:TelephoneSuffixID/>
</ext:CourtTelephoneNumber>
</ext:ProtectionOrderIssuingCourt>
<ext:ProtectionOrderIssuingDate>2014-12-22</ext:ProtectionOrderIssuingDate>
<ext:ProtectionOrderIssuingJudicialOfficial>
<nc:PersonName>
<nc:PersonGivenName>Do</nc:PersonGivenName>
<nc:PersonMiddleName>P.</nc:PersonMiddleName>
<nc:PersonSurName>Ande</nc:PersonSurName>
<nc:PersonNameSuffixText/>
<nc:PersonFullName>Ande, Do P.</nc:PersonFullName>
</nc:PersonName>
</ext:ProtectionOrderIssuingJudicialOfficial>
<ext:ProtectionOrderOtherIdentification>
<nc:IdentificationID>12345</nc:IdentificationID>
<ext:ProtectionOrderOtherIdentificationTypeCode>NCICNUM</ext:ProtectionOrderOtherIdentificationTypeCode>
</ext:ProtectionOrderOtherIdentification>
<ext:ProtectionOrderService>
<ext:ProtectionOrderServiceAgency>
<nc:OrganizationIdentification>
<nc:IdentificationID>MN0191000</nc:IdentificationID>
</nc:OrganizationIdentification>
</ext:ProtectionOrderServiceAgency>
<ext:ProtectionOrderServiceDate>2015-01-10</ext:ProtectionOrderServiceDate>
<ext:ProtectionOrderServiceTime>16:25:00-06:00</ext:ProtectionOrderServiceTime>
<ext:ProtectionOrderServiceToCode>Respondent</ext:ProtectionOrderServiceToCode>
<ext:ProtectionOrderServiceTypeCode>BYPUB</ext:ProtectionOrderServiceTypeCode>
</ext:ProtectionOrderService>
<ext:ProtectionOrderService>
<ext:ProtectionOrderServiceAgency>
<nc:OrganizationIdentification>
<nc:IdentificationID>MN0191000</nc:IdentificationID>
</nc:OrganizationIdentification>
</ext:ProtectionOrderServiceAgency>
<ext:ProtectionOrderServiceDate>2015-01-10</ext:ProtectionOrderServiceDate>
<ext:ProtectionOrderServiceTime>16:25:00-06:00</ext:ProtectionOrderServiceTime>
<ext:ProtectionOrderServiceToCode>Respondent</ext:ProtectionOrderServiceToCode>
<ext:ProtectionOrderServiceTypeCode>BYPUB</ext:ProtectionOrderServiceTypeCode>
</ext:ProtectionOrderService>
<ext:ProtectionOrderService>
<ext:ProtectionOrderServiceAgency>
<nc:OrganizationIdentification>
<nc:IdentificationID>MN0191000</nc:IdentificationID>
</nc:OrganizationIdentification>
</ext:ProtectionOrderServiceAgency>
<ext:ProtectionOrderServiceDate>2015-01-10</ext:ProtectionOrderServiceDate>
<ext:ProtectionOrderServiceToCode>Respondent</ext:ProtectionOrderServiceToCode>
<ext:ProtectionOrderServiceTypeCode>BYPUB</ext:ProtectionOrderServiceTypeCode>
</ext:ProtectionOrderService>
<ext:ProtectionOrderService>
<ext:ProtectionOrderServiceAgency>
<nc:OrganizationIdentification>
<nc:IdentificationID>MN0250800</nc:IdentificationID>
</nc:OrganizationIdentification>
</ext:ProtectionOrderServiceAgency>
<ext:ProtectionOrderServiceDate>2015-01-09</ext:ProtectionOrderServiceDate>
<ext:ProtectionOrderServiceToCode>Respondent</ext:ProtectionOrderServiceToCode>
<ext:ProtectionOrderServiceTypeCode>BYMAIL</ext:ProtectionOrderServiceTypeCode>
</ext:ProtectionOrderService>
<ext:ProtectionOrderService>
<ext:ProtectionOrderServiceAgency>
<nc:OrganizationIdentification>
<nc:IdentificationID>MN0720100</nc:IdentificationID>
</nc:OrganizationIdentification>
</ext:ProtectionOrderServiceAgency>
<ext:ProtectionOrderServiceDate>2014-12-22</ext:ProtectionOrderServiceDate>
<ext:ProtectionOrderServiceToCode>Respondent</ext:ProtectionOrderServiceToCode>
<ext:ProtectionOrderServiceTypeCode>BYPUB</ext:ProtectionOrderServiceTypeCode>
</ext:ProtectionOrderService>
<ext:ProtectionOrderStatus>
<ext:ProtectionOrderStatusCode>SBJO</ext:ProtectionOrderStatusCode>
<ext:ProtectionOrderStatusDate>2014-12-22</ext:ProtectionOrderStatusDate>
</ext:ProtectionOrderStatus>
<ext:ProtectionOrderTypeCode>OFP</ext:ProtectionOrderTypeCode>
<ext:QualifyingRelationship>
<ext:QualifyingRelationshipCode>LIVTOGTHR</ext:QualifyingRelationshipCode>
<ext:QualifyingRelationshipText>Lived Together</ext:QualifyingRelationshipText>
</ext:QualifyingRelationship>
<ext:Respondent>
<nc:PersonEthnicityCode/>
<nc:PersonEyeColorCode/>
<nc:PersonHairColorCode>XXX</nc:PersonHairColorCode>
<nc:PersonHeightMeasure>
<nc:MeasureText>71</nc:MeasureText>
<nc:MeasureUnitText>inches</nc:MeasureUnitText>
<nc:LengthUnitCode>INH</nc:LengthUnitCode>
</nc:PersonHeightMeasure>
<ext:PersonRaceCode>W</ext:PersonRaceCode>
<nc:PersonSexCode>M</nc:PersonSexCode>
<nc:PersonWeightMeasure>
<nc:MeasureText>210</nc:MeasureText>
<nc:MeasureUnitText>pounds</nc:MeasureUnitText>
<nc:WeightUnitCode>LBR</nc:WeightUnitCode>
</nc:PersonWeightMeasure>
<ext:AddressReference ext:currentIndicator="true">
<nc:LocationReference s:ref="DB1618611387"/>
</ext:AddressReference>
<ext:PersonBirthDate ext:approximateDateIndicator="true" ext:currentIndicator="false">1990-12-23</ext:PersonBirthDate>
<ext:PersonBirthDate ext:approximateDateIndicator="false" ext:currentIndicator="false">1989-12-23</ext:PersonBirthDate>
<ext:PersonBirthDate ext:approximateDateIndicator="false" ext:currentIndicator="true">1991-12-23</ext:PersonBirthDate>
<ext:PersonName ext:currentIndicator="true">
<nc:PersonGivenName>Guy</nc:PersonGivenName>
<nc:PersonMiddleName>Andr</nc:PersonMiddleName>
<nc:PersonSurName>Noir</nc:PersonSurName>
<nc:PersonNameSuffixText>Jr.</nc:PersonNameSuffixText>
<nc:PersonFullName>Noir Jr , Guy Andr</nc:PersonFullName>
</ext:PersonName>
</ext:Respondent>
<ext:RespondentPresentAtHearingIndicator>false</ext:RespondentPresentAtHearingIndicator>
</ext:ProtectionOrder>
<ext:SupersededProtectionOrderID xmlns:exc="http://www.courts.state.mn.us/ProtectionOrderServiceExchange/1.0" xmlns:s="http://niem.gov/niem/structures/2.0" xmlns:usps="http://niem.gov/niem/usps_states/2.0"/>
<ext:Hearing xmlns:exc="http://www.courts.state.mn.us/ProtectionOrderServiceExchange/1.0" xmlns:s="http://niem.gov/niem/structures/2.0" xmlns:usps="http://niem.gov/niem/usps_states/2.0">
<ext:HearingDateTime>2015-01-20T09:00:00-06:00</ext:HearingDateTime>
<ext:HearingLocationText>Scott County</ext:HearingLocationText>
</ext:Hearing>
</poq:ProtectionOrderQueryResponse>

Inert to root as first nood.
http://msdn.microsoft.com/en-us/library/system.xml.xmlnode.insertbefore(v=vs.110).aspx
Dim doc As New XmlDocument()
doc.LoadXml("<book genre='novel' ISBN='1-861001-57-5'>" & _
"<title>Pride And Prejudice</title>" & _
"</book>")
Dim root As XmlNode = doc.DocumentElement
'Create a new node.
Dim elem As XmlElement = doc.CreateElement("price")
elem.InnerText = "19.95"
'Add the node to the document.
root.InsertBefore(elem, root.FirstChild)
Console.WriteLine("Display the modified XML...")
doc.Save(Console.Out)
remember make the reply as answer and vote the reply as helpful if it helps.

Visual Studio 2013 is creating new feature every time new list definition is added

We are using Visual Studio 2013 and details are as under:
Microsoft Visual Studio Ultimate 2013
Version 12.0.30501.00 Update 2
We we add a new list definition in our project, it creates a new feature with it. If we delete the feature and add list definition in the existing feature, list is created but columns are not added in the list.
Same thing happened if we rename "Feature1", a new feature is created every time a new list definition is created.
This doesn't happen when we add a Visual WebPart.
Also, we have three different custom list option in the drop down in new list creating wizard.
Is this a bug or we are doing something different.
http://farhanfaiz.wordpress.com

Intellisense has a bug in VS2013 where it doesn't recognize InitializeComponent when you start working on the XAML. My feeling is that if you try to compile this app, it will run fine (as long as there are no actual errors).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

How to add new fields in the EBP front end..

Hi All,
Can any one let me know the process of how to add new fileds in the shopping cart creation screens by using the "Tag Browser" option in the Object navigator.
Best Regards,
Mahesh. J

Hi
Please go through the following links for more details and examples ->
http://help.sap.com/saphelp_47x200/helpdata/en/a2/8c6eeb2d8911d596a000a0c94260a5/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d3/5ecbe22a8a11d5991f00508b6b8b11/frameset.htm
This will definitely help.
For adding customer fields to the Shopping cart, you need to refer SAP OSS Bote 672960 and 485891.
Do let me know, incase you need any other details.
Regards
- Atul

IF NEW VARIABLE IN SQL QUERY, DISPLAYS AS LAST COLUMN + rpad not working

Hello everybody and thank you in advance,
1) if I add a new variable to my sql query to select a column which was already in the table, it shows it in the report table as the Last column to the right. That is, if I add "street" to
something like city, postcode, street, store, manager, etc, instead of placing street between postcode and store, it places it as i said as the last column to the right.
2) When values are entered into the cells of the tables, yes, they do expand it to their needed lenght, But, only if it is one word. If it is two, like when i enter the value "very good"
then it takes two lines so as with a carriage return within the cell, thus, making it too high the row. I tried to padd spaces with rpad but it did not work. something like rpad(stock, 20,' ')
I must say that the table is in the same page where there is a Form, so as the table grows in lenth it is actually squeezing the form located right on its left.
3) rpad did not work with the most simple syntax, but less would with what i need because it turns out i am using DECODE in order to do a conversion between value displayed and
value returned in my select list of values, something like : DECODE (TO_CHAR (stock),'1','Deficient','2','Average','3','Good','4','Very Good',null) AS stock,
so, i have tried to put the rpad there in several places but either it gave parsing error or it left the column empty not picking any values.
thank you very much
Alvaro

Alvaro
1) That is standard behaviour of apex builder. You can change the display order with the arrows in the report attributes column report.
2) You will have to play with the style attributes of the column to accomplice this. For instance style="white-space:pre;" in the Element Attributes of the column attributes. White-space:normal would thread several space (' ') as 1. So no matter how many you add with rpad they will be shown as 1.
Or set a width either as attibute or in a style class for that column.
Nicolette

Hi All how to add new payscale for an employee in sap hr-abap,its urgent

Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumar

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
Reward points for useful Answers
Regards
Anji

Add new variable definition

Similar Messages

Maybe you are looking for