Add object to request

Gurus
How to add objects to a request having some other objects .
Thankyou gurus

Hi,
You can add the objects using SE10 also.
Double click on the request, goto change and enter the object type and enter the object. Save.
After that donot forget to lock the object before transport release.
Hope this helps..
Thank you,
S R.

Similar Messages

Ho to programmaticaly add objects to Transport Request

Hi Experts,
I have a requirement programmatically add objects to a Transport request.
My requirement is , to modify/delete entries from DB table in the program and to create that object under a Transport request. I could successfully add objects while creating entries to the DB table. I have some confusion when I'm to delete entries in the DB table. How am I to achieve this. Is there some delete key/flag in the transport request which indicates that the entry is for deletion in the table.? When the TR is SAP craeted, both the creation and deletion TR appears the same.
I'm using FM 'TR_REQUEST_CHOICE' to add the objects.
Thanks in advance ,
Regards,
Anjali

Thanks Neenu, My problem is not in adding objects to a TR.
Suppose I have a Config table, which I want to maintain by the use of an program. With this program I should be able to create and delete entries in the config table. Now While creation, i face no problem or confusion in adding the tasks to the Transport request. But if I'm to delete entries from the config table and maintain it in the transport request, how shall i do it? The TRs which SAP creates for addition of entries and deletion of entries appears same. I cannot spot any differnce in the tasks while creation of entries and deletion of entries from the DB table.

How to add Objects to transport request through FM/BAPI?

Hi All,
I am creating a workbench request through program. I am able to create it by using BAPI but i am unable to add objects to it through program.
Can anybody tell me the funcion module/bapi to add object to transport request?
i have the list of objects that are suppose to be added.
No BDC please.
Thanks ,
Swarup

Hi Swarup,
Check FM TRINT_MODIFY_COMM. Also look at program TH_TKANL for the usage of FM.
Thanks
Lakshman

Is there any BAPI/FM to create a trasnport request and add objects into it?

Hi Experts,
Could anyone please assist me in finding a BAPI/FM to create a transport request and add objects to it.
I could find a BAPI BAPI_REQUEST_CREATE, it creates trasnport request but doesn't have option to add objects.
Thanks
Yogesh Gupta

Create a custom Function Module , in that write a BDC to create a transport request and add objects to it.
Thats it.

The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

Hi,
I have created on windows service to fetch sharepoint list ad update the list items.
when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
Code snippet
SPSite sharepointSite = null;
            SPWeb rootWeb = null;
            try
                //SPList current = null, previous = null;
                string colmId = ConfigurationManager.AppSettings[ID_COLM];
                List<TaskEntity> list = new List<TaskEntity>();
                sharepointSite = new SPSite(URL);
                rootWeb = sharepointSite.OpenWeb();
                SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                WriteEventLog("current" + current.Items.Count.ToString());
            catch (Exception ex)
                ExceptionMethod(ex);
            finally
                sharepointSite = null;
                rootWeb = null;
I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

Hi mallela1,
I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
Regards,
Nandini

Function to add Objects to transport piece list (CTS)

Dear all,
with function "TR_EXT_INSERT_IN_REQUEST" I can add objects to a transport request. Now I need to "fill" a piece list. The function module is not working for piece lists (documented).
Does anybody please know a function to add objects to a piece list?
Thanks and best regards for help.
Roman

Funny, German and English documentation is different:
German:
Kurztext
Anhängen und Sperren von Objekten und Schlüsseln an eine Aufgabe
Dieser Funktionsbaustein ist veraltet. Bitte verwendet Sie stattdessen
TR_REQUEST_CHOICE für einen Transportanschluss oder
TR_OBJECT_CHECK und TR_OBJECT_INSERT für die Änderungsaufzeichnung.
Weitere Doku finden Sie bei diesen Bausteinen.
This means: Do not use anymore instead use TR_OBJECT_CHECK and TR_OBJECT_INSERT .
Best regards
Roman

SAP HANA Attribute View- Not able to add objects

Hi All,
I've created one attribute view in Modeler Perspective.
Trying to add tables on data foundation using "Add Objects". But when table name is entered in pop-up window, it hangs (not-responding). And error log got created as below.
I'm not able to add the tables.
"SAP DBTech JDBC: Object is closed: com.sap.db.jdbc.ConnectionSapDBFinalize@8e003d[ID 225800]."
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Object is closed: com.sap.db.jdbc.ConnectionSapDBFinalize@8e003d[ID 225800].
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:334)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:136)
at com.sap.db.jdbc.ConnectionSapDB.assertOpen(ConnectionSapDB.java:224)
at com.sap.db.jdbc.ConnectionSapDB.getTransactionIsolation(ConnectionSapDB.java:1263)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1122)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:888)
at com.sap.db.jdbc.FetchInfo.executeFetch(FetchInfo.java:162)
at com.sap.db.jdbc.FetchInfo.executeFetchNext(FetchInfo.java:157)
at com.sap.db.jdbc.ResultSetSapDB.fetchNextChunk(ResultSetSapDB.java:2418)
at com.sap.db.jdbc.ResultSetSapDB.next(ResultSetSapDB.java:419)
at com.sap.db.jdbc.trace.ResultSet.next(ResultSet.java:269)
at com.sap.ndb.studio.sql.model.tables.impl.CatalogImpl.getCatalogObjects(CatalogImpl.java:338)
at com.sap.ndb.studio.sql.model.tables.impl.CatalogImpl.getCatalogObjects(CatalogImpl.java:414)
at com.sap.ndb.studio.bi.search.provider.CatalogObjectSearchProvider.doSearchInternal(CatalogObjectSearchProvider.java:172)
at com.sap.ndb.studio.bi.search.provider.CatalogObjectSearchProvider.doSearch(CatalogObjectSearchProvider.java:95)
also,
"Could not fetch catalog objects"
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Object is closed: com.sap.db.jdbc.ConnectionSapDBFinalize@64b085[ID 225787].
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:334)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:136)
at com.sap.db.jdbc.ConnectionSapDB.assertOpen(ConnectionSapDB.java:224)
at com.sap.db.jdbc.ConnectionSapDB.prepareStatement(ConnectionSapDB.java:1964)
at com.sap.db.jdbc.trace.Connection.prepareStatement(Connection.java:362)
at com.sap.ndb.studio.jdbc.JDBCConnection.prepareStatement(JDBCConnection.java:479)
at com.sap.ndb.studio.catalog.internal.JdbcExtended.getTablesCaseInSensitive(JdbcExtended.java:277)
at com.sap.ndb.studio.catalog.CatalogUIPlugin.internalGetTableNames(CatalogUIPlugin.java:669)
at com.sap.ndb.studio.catalog.CatalogUIPlugin.getTableNamesNoProgressService(CatalogUIPlugin.java:1156)
at com.sap.ndb.studio.sql.dialogs.FindTableDialog.fillContentProvider(FindTableDialog.java:504)
at org.eclipse.ui.dialogs.FilteredItemsSelectionDialog$FilterJob.filterContent(FilteredItemsSelectionDialog.java:2182)
at org.eclipse.ui.dialogs.FilteredItemsSelectionDialog$FilterJob.internalRun(FilteredItemsSelectionDialog.java:2124)
at org.eclipse.ui.dialogs.FilteredItemsSelectionDialog$FilterJob.doRun(FilteredItemsSelectionDialog.java:2096)
at org.eclipse.ui.dialogs.FilteredItemsSelectionDialog$FilterJob.run(FilteredItemsSelectionDialog.java:2083)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
Thanks,
Sujit

Hi Sujit,
The log seems that connection is closed. Is it true? Did your system restarted?
What happens if you close the studio, open it and try again?
Are you using same revision Studio than the database?
Regards, Fernando Da Rós

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

How to add objects to panel in one class from another class

Hi this is what i am trying to do. I have a drag and adrop tool working where the users and select objects on a small panel and drag them to another panel called the tpan. What i want to do is create another class, which creates objects and now i want to display these objects on the tpan. So say i have a class DisplayTpan(), this class is used to display the objects which have been dragged from the small panel, and objects on this panel have mouselisteners attached, so that these objects can be moved around on the tpan. I have created another class called creatObj(), and from this class i want to add objects to the tpan. The DisplayTpan class extends a Jpanel, would this be he case for the CreateObj() class? In the CreateClass i have made a call to DisplayTpan t = new DisplayTPan();
t.add(object);
But this does not add the object to the panel, any ideas on how it should be done?
Problem number two i have is say, I have two objects created on that oanel, i now want to draw a line t connect the two objects, this is just simply a call to the drawLine function but how would it be possible to add a ,mouselistener to that line, so it can be extended moved around etc? Any help much appreciated thanks.

Try to convert the PL/SQL code from Forms trigger into a PL/SQL library(.PLL),
and then attach that PLL in your forms.
Note that all Forms objects should be referenced indirectly, for example,
you have to rewrite
:B1.DEPT_CODE := :B2.DEPT_CODE;
:B3.TOTAL_AMOUNT := 100;
==>
copy('B2.DEPT_NO','B1.DEPT_NO');
copy('100','B3.TOTAL_AMOUNT');
This is the best way to share PL/SQL code among Oracle Forms.

How to add objects to panel from another class?

Hi this is what i am trying to do. I have a drag and adrop tool working where the users and select objects on a small panel and drag them to another panel called the tpan. What i want to do is create another class, which creates objects and now i want to display these objects on the tpan. So say i have a class DisplayTpan(), this class is used to display the objects which have been dragged from the small panel, and objects on this panel have mouselisteners attached, so that these objects can be moved around on the tpan. I have created another class called creatObj(), and from this class i want to add objects to the tpan. The DisplayTpan class extends a Jpanel, would this be he case for the CreateObj() class? In the CreateClass i have made a call to DisplayTpan t = new DisplayTPan();
t.add(object);
But this does not add the object to the panel, any ideas on how it should be done?
Problem number two i have is say, I have two objects created on that oanel, i now want to draw a line t connect the two objects, this is just simply a call to the drawLine function but how would it be possible to add a ,mouselistener to that line, so it can be extended moved around etc? Any help much appreciated thanks.

As for your first problem...too confusing...too tired...mb tomorrow it will make sense :)
Fer the second...no need to add a mouse listener to each line. There are a couple options that spring to mind, the easiest I can think of is just check to see if the mouse click intersects with any of the lines (bit of geometry).
The second, ugly but a hella allot more accurate and better (me thinks), is to create a bounding box around the line, so the user doesn't have to click right right on the line. I created this bounding box by painting the pixels with a special key to correspond to that line. The other nice thing about this key is the fact that the lookup is quick.
The first step was the create a array of integers the size of the surface. Whenever a line is drawn on the graphical surface, do a corresponding line in the integer array, and create the bounding box inside this invisible array. Now whenever the user clicks just do a lookup into this array and check to see which line was selected...then go to town.
If you want a more detailed explination, i'll post some code later.

Add debit memo request to Sap credit exposure formula

Hi,
can any body plz suggest me how to add debit memo request(DR) to sap credit exposure formula.
thanks
Ramu

Hi.
We have a requirement from business to create debit memo request with refernce to a credit memo
HOW IT IS FESIABLE TO CREATE ???
Both are created wit refrance to order or billing document or without.
Still you want it then set copy controll for this in VTFA , VTAA
Kapil

How to set an object in request scope in a jsp uysing jstl

I usally use scriptlet in jsp to set an object in request is
there a way to do this using jstl
instead of this
<%request.setAttribute("test",myObject);%> I want to use tag ?

The <c:set> tag should be useful...
Of course if you can access it as a JSTL variable it IS already an attribute in scope.

Add-on Transport request

Hello!
In what instances would we use 'add-on transport request' which appears in the drop down menu of Configuration tab in solar02 transaction?
Thanks.
Mike

When you want to use existing transports to configure your process rather than re-keying in the configuration. However, I cannot imagine why you would want to detail your configuration this way.
Maybe when you want to provide a level of confusion as to how the system was configured? It's sort of similar to when you put a BC Set on the Config tab. Without a document telling you what the BC Set is doing it kind of makes it hard to see the big picture.

Add object to scene

Hi every body.
I have a problem. i want to add object in scene, but i want to add object when user pick other object. the PickBehavior i write this and it�s work and i can recognize the object have been selected. However i can not add other object.
Anebody can help me.
Thank
This is my pickbehavior code
public void updateScene(int i, int i0) {
PickResult pickResult = null;
Node n = null;
Logger.getLogger(this.getClass()).info("En el update scene");
this.pickCanvas.setShapeLocation(i,i0);
pickResult = pickCanvas.pickClosest();
if (pickResult != null) {
n = pickResult.getNode(PickResult.SHAPE3D);
Logger.getLogger(this.getClass()).info("==>"+n.toString());
if (n instanceof FieldShape) {
Logger.getLogger(this.getClass()).info("picked FieldShape");
} else if(n instanceof SoldierShape) {
Logger.getLogger(this.getClass()).info("picked SoldierShape");
BranchGroup bg = new BranchGroup();
bg.addChild(new Sphere(1.7f));
scene.addChild(bg);
this.pickCanvas.getBranchGroup().compile();
} else {
Logger.getLogger(this.getClass()).error("no shape picked");
}

i reply myself :D
i can add other object.
i add this capabilities a branchGroup
root.setCapability(BranchGroup.ALLOW_CHILDREN_WRITE);
root.setCapability(BranchGroup.ALLOW_CHILDREN_EXTEND);
and if you use a transformgroup and you think add other object in TransforGruop you need this code:
transformGroup.setCapability(transformGroup.ALLOW_CHILDREN_WRITE);
transformGroup.setCapability(TransformGroup.ALLOW_CHILDREN_EXTEND);
transformGroup.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
Sorry for my english

UnsupportedOperationException with List.add(Object obj)

List statusCodes = Arrays.asList(OcsCustomDicInfo.acctRefundStatusCodes);
          List statusNames = Arrays.asList(OcsCustomDicInfo.acctRefundStatusNames);
          // Add an additional item          statusCodes.add(Integer.toString(statusCodes.size()));           statusNames.add("All");
          String[] statusCodesArray = (String[]) statusCodes.toArray();
          String[] statusNamesArray = (String[]) statusNames.toArray();I used the Arrays.asList to convert an Array(which is String[]) to a List,then add one item to the List with add(Object obj).
But when the debuger run to the "statusCodes.add(Integer.toString(statusCodes.size())); " breakpoint, it throws UnsupportedOperationException.
I checked the API, the relative statement is:
UnsupportedOperationException - if the add method is not supported by this list.
Why? Doesn't the Arrays.asList() return a "List" Interface,and "List" support "add()" operation,but why not support in this case?

Sorry,i have made a mistake when posting the code.
This is the code:
List statusCodes = Arrays.asList(OcsCustomDicInfo.acctRefundStatusCodes);
List statusNames = Arrays.asList(OcsCustomDicInfo.acctRefundStatusNames);
// Add an additional item
statusCodes.add(Integer.toString(statusCodes.size()));
statusNames.add("All");
String[] statusCodesArray = (String[]) statusCodes.toArray();
String[] statusNamesArray = (String[]) statusNames.toArray();

Add object to request

Similar Messages

Maybe you are looking for