Add-On Basic learning and Certification

Hello Experts,
I 'd like to know the basic steps for developing SBO Add-On and the formal steps for getting a Certification.
Thank you.
Ben.

Hello Ben,
This is the wrong forum, there's a SDK forum for this kind of question.
But you can take a look at the SDK help and the samples (downloads/forum: B1DE) These are simple samples which you leading the way...
For certification contact your SAP contactperson when there are courses availible. Look for TB1300.
HTH
Regards Teun

Similar Messages

  • Easy Question How to create Basic Groups and add respective Users

    Please help. I need to know how to create a basic group and later add users to the group. The group name would be callled Hardware and I will add johnsmith and janedoe to the group. Should I concern myself with the group id for whatever reason? I think the command is somthing like groupadd. Do I do somthing like:
    # groupadd Hardware
    # useradd -G Hardware johnsmith
    # useradd -G Hardware janedoe
    I'm using Solaris 10 if that helps.
    A million thanks I very New2Solaris,
    Johnny Mac

    Ok here is what I found on the net:
    change a user's group information change a user's primary group membership:
    usermod -g Hardware johnsmith
    usermod -g Hardware janedoe
    I forgot to mention that these are existing accounts (sorry)
    In order to change user's supplemental group membership:
    usermod -G Hardware johnsmith
    usermod -G Hardware janedoe
    is the supplemental group simply adding them to another group and not changing there primary group, which by default I think is staff. I would like to keep them in staff and add them to another group, in this case Hardware.
    Anyones thougths?

  • Ask the Expert: Basic Introduction and Troubleshooting on Cisco Nexus 7000 NX-OS Virtual Device Context

    With Vignesh R. P.
    Welcome to the Cisco Support Community Ask the Expert conversation.This is an opportunity to learn and ask questions of Cisco expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and support for the Cisco NX-OS Software platform .
    The Cisco® Nexus 7000 Series Switches introduce support for the Cisco NX-OS Software platform, a new class of operating system designed for data centers. Based on the Cisco MDS 9000 SAN-OS platform, Cisco NX-OS introduces support for virtual device contexts (VDCs), which allows the switches to be virtualized at the device level. Each configured VDC presents itself as a unique device to connected users within the framework of that physical switch. The VDC runs as a separate logical entity within the switch, maintaining its own unique set of running software processes, having its own configuration, and being managed by a separate administrator.
    Vignesh R. P. is a customer support engineer in the Cisco High Touch Technical Support center in Bangalore, India, supporting Cisco's major service provider customers in routing and MPLS technologies. His areas of expertise include routing, switching, and MPLS. Previously at Cisco he worked as a network consulting engineer for enterprise customers. He has been in the networking industry for 8 years and holds CCIE certification in the Routing & Switching and Service Provider tracks.
    Remember to use the rating system to let Vignesh know if you have received an adequate response. 
    Vignesh might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the  Data Center sub-community discussion forum shortly after the event. This event lasts through through January 18, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

    Hi Vignesh
    Is there is any limitation to connect a N2K directly to the N7K?
    if i have a an F2 card 10G and another F2 card 1G and i want to creat 3 VDC'S
    VDC1=DC-Core
    VDC2=Aggregation
    VDC3=Campus core
    do we need to add a link between the different VDC's
    thanks

  • LabView course basic 1 and basic 2

    Hey,
    I'm rather new to LabView and to get more experience in 'programming
    LabView' I thought it may be some idea to go to the basic 1 and basic 2
    course, provided by NI... (and in some time got and see the DAQ-course)
    Anyone out there who took this course (these courses) ?
    My basic topic is DAQ. (Not faster than 100 S/s at this moment). Before I
    decide to follow this course it would be a good idea to find out if I
    already got the experience I would get from this course. In that case it's a
    waste of money of course.
    Who can tell me what you really learn at Basic 1 and 2. Is it a waste of
    money (and time)?
    Perhaps it helps if I send some vi's I've created and tell them what they
    do. (In separate e-mail)
    please reply on
    e-mail
    Boozz.

    I've taken both Basics I and II, and the LabVIEW DAQ course. In my case
    they were worth it. I'm not sure if your situation is the same as mine,
    though. My schedule is usually pretty full. So I was able to take these
    courses and get up to a point where I could do all the basic functions in
    one week. That was a big help. I might add that I'm an instructor by
    trade, not a programmer, so I don't have years of C programming behind me.
    Also, my company paid for the courses, which made my decision a lot easier!
    Another benefit that really helped me is that the instructors really cared,
    and offered to give me some help even after the course was over. I didn't
    want to abuse this offer, so I was very careful in how much I asked of them,
    but they both were more than
    helpful. This is the kind of service that's
    hard to find out there! Both instructors worked for National Instruments
    Alliance Member companies. They were knowledgeable and serious about
    ensuring I got my money's worth.
    If you are already familiar with wiring VIs, then I would suggest that you
    go to the NI web site and look at the detailed course outline for these
    courses. If you are already familiar with what is covered in these courses,
    then obviously you wouldn't gain much by taking them. If you need to learn
    a lot of what is shown in the outlines, then there is no quicker way to get
    up to speed.
    Best of luck to you,
    Mike

  • HT4913 i am trying to get my computer and my wifes computer on my itunes match.  i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please

    i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please explain.  is this going to screw my wifes account up? 

    If you both have seperate iTunes Store accounts then basically, yes, it is going "screw up" your wife's account.
    iTunes Match is designed as a single-user service which is associated with one and only one iTunes Store account ID. If you have subscribed on your account and want to activate the service on another computer that is already signed in with an account the present account must be signed out and then iTunes signed into your account. This means the other computer will have complete access to your account and will only be able to make purchases on your account. iTM is not designed to be signed in and out at will. If she has apps purchased with her iTunes Store account they will not be able to be updated.

  • I'm trying to learn and I think the knowledge is here!

    Hi! i'm always trying to learn and pass forward.  I'm not here to cause trouble. I have some things that I would like to have confirmed or denied. I do not own a HP computer at this time, but several of the residents in my village do. I have observed some great advice to community members from some smart people here on the forum. I have some things that I have learned from other forums and I want to share them. I would like to have comments from all the smart members here on the community forum. OK here we go!!
    Let's say we have a PC that won't boot into windows for some reason. Now IMHO, we have software or hardware problems.
    This is what I do. I down load a linux program. It's called Pupply Love.http://puppylinux.org/main/Overview%20and%20Getting%20Started.htm
    This is a ISO file that you burn to a CD. It is a live CD and you can boot with it. You do not need a HD.
    Even if your PC has no hard disk (ex, broken hard disk), you can still boot Puppy via CD or USB and continue working. Old PCs that no longer work with new systems will still work good-as-new with Puppy.
    Now IMHO, you have proved that your monitor,power supply, and CPU are working. So now the HD is left. There are many ways to test your HD. One that comes to my mind is seatools dos.http://www.seagate.com/support/downloads/item/seatools-dos-master/
    One way to test your memory is memtest86.http://www.memtest86.com/download.htm
    memtest and seatools dos are both live CD's and should boot even if you don't have a working OS.
    Another live CD is the system repair CD  and the system recovery discs that you should have created on day one.
    I realize that HP has some great tools and I'm hoping that a guru will reply to this thread and add their comments. This is the way I learn. Computers can be a pain in the neck, but us humans can hold our own if we are willing to learn and pass forward to others.
    Dokie!!
    PS I take criticisms pretty well! This thread can be deleted if it is out of line or does not meet the standards of the forum. Some times I get a little windy and carried away.

    Hi Leo! If you can stop these down load managers, you will be my hero.
    Dokie!!
    PS I have tried my best to warn members here on the forum, but I haven't got a lot of support so far.
    I have my figers crossed that the new team will get-er-done

  • Difference between Basic Component and Standard Component

    Hi Iam just learning JSF, at the same time I try to learn to use Sun Java Studio Creator at the same time. May I know what is the difference between the Basic component and the Standard component in the IDE.
    I have been using the Grid Panel, each time I need a header I manually t ype
    <f:facet name="header">
    </f:facet>
    in the JSP source code. How can I do this visually?
    Thanks,
    james

    The Standard section in the Palette contains the JavaServer Faces reference implementation components. The IDE provides the standard components for backwards compatibility with projects that were built with earlier versions of the IDE. Because the standard components provide less functionality and require more programming, you should use the visual components from the other Palette sections.
    I do not know the answer to your second question.
    Chris

  • HTTP Basic Auth and Username Authentication with Symmetric Key

    Hi,
    I have a webservice happily running on tomcat 5.5 using "Username Authentication with Symmetric Key" I have certificates setup and everything works fine. I can even connect a .net client and use the service.
    Now I have an additional requirement of authorization per operation basis so I'm planning on using the roles. My current setup uses tomcat-users.xml to configure users but I seem unable to identify the role of the user from within my code as wsContext.isUserInRole("briefing") always returns false even when it clearly isn't. Where wsContext = @Resource private WebServiceContext wsContext.
    So I figure perhaps I need to add HTTP Basic Auth to tomcat for it to gather this information so I added security-constraints to the web.xml and this seems to do the trick: at least it does for my .net client.
    If I do:
      Service service = new Service();
      Port client = service.getPort();
      BindingProvider bp = (BindingProvider)client;
      bp.getRequestContext().put(BindingProvider.USERNAME_PROPERTY, "myusername");
      bp.getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, "mypassword");Then it all works fine. However, I'd like a little less transparency: I don't want to have to do this every time I make a call.
    My question(s) is:
    1) Am I going about this the right way (perhaps I am somehow getting the incorrect reference to the WebServiceContext)
    2) If I am going about this the right way I imagine the whole BindingProvider code needs to be added to as a policy configuration but I'm really not sure where to start especially as I'm using wsimport to generate everything: I'm not even sure where to configure this so it will not get overwritter.
    Thanks for any help.

    Doh! Ok So I've added a SOAP Handler to automatically add the username and password for the HTTP Basic Auth.
    All in all does this setup sound right?

  • Basic start and finish dates vs scheduled start and finish dates in work order

    Hi Friends,
    I have observed  that whenever releasing the work order,irresepective of number of operations in the work order, system generating scheduling start and finish dates are same, however after releasing the Work order and by adding another operation in the work order, immediately scheduling end date equaling to Basic finish date (i.e.: Basic start and finish dates are equal to Schedule start and finish dates).
    Can any body please explain why this is heppening
    Please find the screen shots.
    After adding one more operation in the operation list and save the Work order,then Basic start and finish dates are equal to schedule start and finish dates.
    Regards,
    Srinika

    Srinika
    There are many things that affect the order scheduling:
    IMG setting - scheduling parameters
    Work centre settings
    Operation values e.g. work, duration, operation control key settings
    Calendars
    Etc
    So one possible interpretation of the above data is that the initial order operations have no work assigned, or the operation control keys don't require scheduling, or the work centres arn't set up correctly.
    Then you add a new operation which does appear to work.
    Please supply a screen-shot of the operation tab.
    PeteA

  • Pricing : Discount on basic price and excise duty

    Hi gurus,
    I want to give a discount based on sum of basic price and excise duty.  But Excise duty is captured only in tax.
    In this case how to give the discount based on the sum of basic price and excise duty since excise duty is not in the pricing procedure.
    Regards,
    vimal

    Hi,
    Add Excise condition in pricing procedure in rquire step.
    reward if helpful,
    Regards,
    Chetan.

  • Add-ons  with Add-on basic

    Hi, I'm about to develop an add-on for SAP business one and I would like to know whether the add-on will run if the user has an Add-on basic license. If so, is there anything I should know about it before creating the add-on?

    Costas,
    You should look at the SAP Business One SDK Help Center documentation and specifically at the "Package and Deployment" section as this will give you the information to your question.
    HTH,
    Eddy

  • [FSCM] add parallel valuation area and new valuation classes

    Hi, everyone
    I have a plan to add parallel valuation area and new (general) valuation class for International Financial Reporting Standards. But I have no experience adding another valuation area. Basically, SAP says new valuation area could be added any time. The concept of parallel valuation area also support that. But I am concerning that there could be a problem technically. Even though there would be a problem when I try to transfer valuation class of new valuation area.
    If someone has an experience with these problems, please let me know and prepare that.
    Thanks.
    Best regards.
    Minsun Joo

    OX14 - Define Valuation Area (Tick one only- Once your system go live, no more changes)
                 Most company take the SAP recommended choice - Value Material Stock at Plant level
                 Value Material Stock at Plant or Company Level
              o If you valuate material stocks at plant level, the plant is the  valuation area.
              o If you valuate material stocks at company code level, the company code is the valuation area.
              o The decision you make applies to the whole client.
    Kesh

  • The battle to add some basic interaction to QuickTime?

    How do you actually work with quicktime files after the apparent death of Livestage pro?
    I've been searching, testing and loosing the battle to add some basic interaction to QT .mov's.
    livestage pro seams to be the only tool which actualy allowed creating interactive QT's. (I hope I'm wrong)
    My objective is to add a graphical PLAY button to the first screen of the clip.
    On the last screen I would like to put a play again button and play next, or playing next automatically after 12 seconds.
    Pulling the "next clip " from an xlm or data base would be great, I've found some Live stage project files to do that, but who knows if they still work with QT 7.*?
    I see that there's some posters on here with many post's.
    I'm gratefull for any assistance.

    Click on the pdf file on the left...
    http://developer.apple.com/documentation/QuickTime/Conceptual/QTScripting_JavaSc ript/index.html
    This will show you how to use text or graphics to make stop...play...etc for interaction in a Qt for the web. And it will show you how to click on text or graphics to call for a video into a div (video frame).
    And this one using buttons...
    http://www.kenvillines.com/archives/000008.html
    Easy to use...

  • [svn] 1455: add sql date types and custom serialization tests

    Revision: 1455
    Author: [email protected]
    Date: 2008-04-29 11:56:59 -0700 (Tue, 29 Apr 2008)
    Log Message:
    add sql date types and custom serialization tests
    Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/DateTy pesTest.mxml
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/MyFile Ref.as
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/Proper tyProxyTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/SQLDat eTypesTest.mxml

    Congrats to Shanky and Durval!
     SQL Server General and Database Engine Technical Guru - June 2014  
    Shanky
    SQL Server: What does Column Compressed Page Count Value Signify
    in DMV Sys.dm_db_index_physical_stats ?
    DB: "Interesting and detailed"
    DRC: "• This is a good article and provides details of each and every step and the output with explanation. Very well formed and great information. • We can modify the create table query with “DEFAULT VALUES". CREATE TABLE [dbo].[INDEXCOMPRESSION](
    [C1] [int] IDENTITY(1,1) NOT NULL, [C2] [char](50) NULL DEFAULT 'DEFAULT TEST DATA' ) ON [PRIMARY]"
    GO: "Very informative and well formed article as Said says.. Thanks for that great ressource. "
    Durval Ramos
    How to get row counts for all Tables
    GO: "As usual Durva has one of the best articles about SQL Server General and Database Engine articles! Thanks, buddy!" "
    Jinchun Chen: "Another great tip!"
    PT: "Nice tip" 
    Ed Price: "Good topic, formatting, and use of images. This would be far better if the examples didn't require the black bars in the images. So it would be better to scrub the data before taking the screenshots. Still a good article. Thank you!"
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

    Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

    Hello there, g0ddess.
    The following link proves to be a great resource to get started with Apple  Training and Certification:
    Training and Certification
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for