Add on for SAP 2005 B one run in the SAP 2005 A

Hi to all,
I have one Doubt.the add on for sap b1 2005 B shall we run in the sap b1 2005A.
If Anybody know reply quickly please !!!
Regards,
Ramya.S

Ramya,
It will depend on which Addon's you are referring. Certain Addon only apply to certain localizations while others are common to both A and B.
Example: Outlook integration would work for both A and B, while the Fixed Asset add-on might not be applicable to all localization within A or B. It all depends.
Suda

Similar Messages

HR CEE add-ons for different countries in one system

Hello,
is it possible to have HR CEE add-ons for different countries in one system?
Will SAP system work properly? What kind of risks of these imports?
Thank you very much.

A couple of generic answers on add-ons
- of course you can have several add-ons working on the same B1. To understand
the details on how add-ons are started and maintained by B1 desktop pls refer
to the e-learning available here on SDN
- compatibility of add-ons. There is no generic answer to this, it depends on the
functionality and implementation of the two add-ons. Anyway, if two add-ons are
functionally independent and they follow the solution guidelines, then they should
be interoperable. You can find the solution certification guidelines here on SDN
under the ICC section: these rules cover points like namespaces, event handling,
user table and form creation and so on that enforce interoperability.

Windows Media Player Extension "Add-on for this website failed to run" except for Administrator

This is on a Windows server 2008 r2. I am trying to allow users to watch help videos at a vendor site. If I remote desktop using the Administrator, I can play the videos and if I check the "manage add-ons", I see Windows Media Player as an extension.
If I remote desktop on as a "normal user" and try to view the same video, I get the error message "An add-on for this website failed to run" and if I check the "manage add-ons", Windows Media Player extension is not there. That
makes sense, since if it is not there, it won't run.
Why isn't Windows Media Player extension showing up in IE 10 on the server for anyone other than Admin? How could I make this work? If I am somehow preventing this from taking place, where would I go on the server to change that?

Hi,
Have you try adding this video website into trusted sites zone or compatibility view list?
Generally, improper security settings may casue failure to run some add-ons. So, please attempt to decrease security level for Internet Zone to check if this issue still occurs.
How do you think your issue is related to Windows Media Player extension? Based on my knowledge, Flash player plug-in can lead to the problem. Please reinstall your flash player for the current user.
Also, Please check in event log for more clues.
Andy Altmann
TechNet Community Support

Retieving list of application installed or running in the SAP Netweaver

Hi ,
I am a .Net Developer.I want to get the Url of the all the application installed or running in the SAP NetWeaver.
And whether it is possible to manage the SAP NetWeaver from the .Net Application.
I<i> dont want to use SAP .Net Connector for that.</i>
Thanks,
-Anil

Hi Anil,
To check for the WAS-J2EE Stack installation - kindly use the following link to access your WAS j22 Start page "http://hostname:5XX00" where XX will be the System No. for SAP System.
Incase if you want to find out that you have a EP installed: goto:-
"http://hostname:5XX00/irj"
For XI , you can go to "http://hostname:5XX00/rep"
Incase the links work properly the software component is installed.
PREREQUISITE for the above CHECKS:
1) The system number should be correct.
2) The Fully qualified domain name should be used for the hostname.
3) The Software components and the J2EE Stack should be operational.
(ON the SAP SERVER)On OS level --> you can Go and have a look for the following directories existence --->
1) usr/sap/SID/DV*.../j2ee,
2) usr/sap/SID/DV*.../SDM
This means that you have atleast the Java Stack installed on your SAP Server.
Next in the task manager(WINDOWS) / process level(UNIX) you can check if you have process "jlaunch process under the sidadm owner".
If you want to manage .Net from NW you need XI
I hope this help you,
Hari.
PS: Points are welcome.

Can any one explain about the SAP Testing process in Implementation Project

Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

hi bharat,
Two types of testing is possible in bw
unit testing
integration testing
Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
Unit testing - One part or the whole part of transfer rules , update rules, etc..
Integration testing - The whole data flow cycle to be tested
This link will give u detailed description
http://en.wikipedia.org/wiki/Software_testing
Stress testing in BI..
/people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
REFER THIS REG CATT
http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
Check this doc on Unit Testing
unit testing
Look at the threads below :
Testing Methods in BW
Unit Testing in BW
How to do testing in BW
Hi...BW testing
Re: Hi...BW testing
Hi...BW testing
Pls refer following links...
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
https://service.sap.com/upgrade-bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
Hope it helps you!
****Assign Points If Helpful****
Regards,
yunus

HT1338 What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

I'd put them on an external hard drive(s) and burn them to a DVD as well (at least 2 - 3 copies on different drives/media); I prefer having control and a local solution instead of relying on a server and the possibility of someone (who shouldn't be) downloading my work.

SQL Server Excel Add In for Data Mining: How do I retrieve the coefficients underlying the logististic regression model in excel

I constructed a logistics regression model inside Excel using the Data Mining Add In. I would like to see the coefficients for each input variable. I can't seem to find this inside excel. I tried running queries in DMX inside
Mgt Studio but that seems to return multiple coefficients
for each input variable. I am seeking
ONE coefficient for each variable.
Other applications I have used in the past provided the intercept and one coefficient for each input variable. Can someone advise on how I can achieve that inside excel or Analysis Services?
Thanks
Rich

We have this problem when we install the add-in using an Administrator's login ID.
The problem is that the add-in automatically registers the Excel add-in. This causes a whole host of problems, including the one you describe (even when we install with the user as the admin on their own machine). Other problems include conflicts with other Add-ins (e.g. nVision) & utlities that import PDF into Excel.
For our Citrix environment we do the following:
· Install Essbase Add-In as Administrator
· Replace “ntuser.dat” file in Default User profile with the “ntuser.dat” file from Administrator’s profile. (Replace C:\Documents and Settings\Default User\NTUSER.DAT with C:\Documents and Settings\Administrator\NTUSER.DAT).
· Delete existing user profile from the system
Once user logs back in, a new profile will be created to work with Essbase add-in.
Note:
1. 1. NTUSER.DAT file is a hidden file. It is only visible if show hidden file option is enabled
2. Deleting user profile from the system remove all user customization such as shortcuts, favorites, pst file etc. as well.
BUG NOTE: When you try to Unregister the Excel Add-in from your Start button, the shortcut points to the wrong file name. The file name should be "unRegExcelAddin.exe"
I hope this helps.

Unable to add Action for table - throwing Fatal error while rendering the table after adding

Hi,
I am not able to add action to the table i created.
when i click on events and then Create Action for "onFilter" event, it is giving me Internal Error. The message details is:
eclipse.buildId=@qualifier@
java.version=1.6.0_45
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en
Command-line arguments: -os win32 -ws win32 -arch x86 -data C:\NWDS\Workspace
Error
Thu Jul 17 11:17:27 IST 2014
Internal Error
   Plug-In Name: Web Dynpro HTML Rendering
   Internal Error : com.sap.ide.webdynpro.rendering.html
   Class      : com.sap.ide.webdynpro.viewdesigner.ur.RenderingService
   Method     : renderDelta
   Message    : java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
   Exception : java.lang.RuntimeException: java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
      [Error: com.sap.ide.tools.services.ui.dialog.DialogService Thread[main,6,main]]
The complete error details is also attached with the message.
After creating the action, the table looks like below:
Can someone help me on fixing this issue.
Thanks,
Abhishek.

Its a rendering issue with the NWDS/IDE.
Try, close and re-open for fix it. If it still persists, uninstall NWDS and re-install the right version of NWDS w.r.t the Portal server.
Regards,
Sharath

Memory Cap for a Windows Service to run in the background all the time on Windows 8.1 Device

I have a Windows Store app that would run on a 2GB windows 8.1 Pro tablet. I want to create a service that would run in the background and more than one store app can utilize that service. The question I have is , is there any memory usage limit for the
service to run on a 2 GB RAM tablet?
I am expecting that the service might use 900 MB of RAM when its operational .
Kindly help

Hi,
For this situation, it seems that you create a wcf service and host the service on windows service which is running on the 2GB windows 8.1 Pro tablet. And other store app in the tablet can utilize that service.
If you want to limit the memory usage for the service, it's recommended that you could host the wcf service on other machine, such as a computer. You just call the service from the store application if you want to invoke the service.
Regards

How to Add a Custom FPM App to MSS without Modifying the SAP Content

Hi,
I'm trying to add a custom application to MSS, under the General Information page. I've created my own FPM application (to display qualifications) and have added it to the standard FPM application. I've mostly followed this blog - however this involves modifying SAP delivered content:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how-toaddacustomWebDynproiViewtotheMSSEmployeeProfile%28ECC+6.0%29&
I would like to be able to find a way to do this without changing the SAP delivered content. Multiple trials with Delta links have proven unsuccessful.
Has anyone been able to do this or does SAP recommend modifying the SAP delivered content?
Any help would be appreciated. This issue has been out for a long time.
Bert

Thanks Markus.
Does that mean that SAP recommends that we make our changes to the FPM application that they deliver in the PCD?
I don't want to have to recreate the same WD applications as what SAP delivers, it would make no sense.
What will happen in case of an upgrade or a patch from SAP? Will my changes be overwritten?
We are starting to make those modifications and it doesn't seem like SAP made it simple for us to do so.
Thanks -
Bert

The load process runs in the SAP GUI and the GUI will timeout if someone do

Hi
Our main issue: for loading DRW/BKT/Characteristics/Doc Files, I have already tested processing the Idocs in Background mode. All the Idocs failed because the background process on the SAP application server cannot access the doc files. (it has to use saphttp.exe on the client)
help me to solve thi sproblem
regards,
jagadish

https://jdic.dev.java.net/
The JDesktop Integration Components (JDIC) project aims to make Java� technology-based applications ("Java applications") first-class citizens of current desktop platforms without sacrificing platform independence.
This demo application demonstrates functionality in the JDIC APIs org.jdesktop.jdic.tray package.
It creates a tray icon on the desktop (in the System Tray Area for Windows platforms, or in the Notification Area for Unix platforms), with a caption (text), an animated icon, and an associated Swing menu containing icons. It also has a tooltip displayed when the mouse hovers over the tray icon.

Call Oracle Help for Java in Oracle forms running in the web

Hi, everyone,
We are developing a web-enabled Oracle database application
system. Oracle suggested us to use Oracle Help for Java(OHJ) to
create an online help system for the web environment. We
successfully created a OHJ program which can be independently.
But we still have no idea how to call this OHJ program from the
forms running in the web environment.
Could anyone help us out?
Thanks.
null

I would like to know if anyone has been able to do this too. Could someone respond if they have successfully gotten this to work?
Thanks!!

Call SAP GUI txn from WD4A running in the SAP GUI

I'm somewhat new to Web Dynpro and I'm trying to evaluate the use of WD4A as our main custom screen/txn platform. I have written a simple application. I created a transaction code that calls WDYID and launches my WD4A application in the SAP GUI.
Our company does a lot of "CALL TRANSACTION" in our normal dynpro development and I need to prove out that it is possible to do the same in WD4A. I've used the following code to try and call a transaction:
CALL METHOD lo_window_manager->create_external_window
    EXPORTING
      url           =
'http://<host>:<port>/sap/bc/gui/sap/its/webgui?sap-client=<client>&~TRANSACTION=VA03'
     title          = 'Display Orderl'
*    MODAL          = ABAP_FALSE
*    HAS_MENUBAR    = ABAP_TRUE
*    IS_RESIZABLE   = ABAP_TRUE
*    HAS_SCROLLBARS = ABAP_TRUE
*    HAS_STATUSBAR = ABAP_TRUE
*    HAS_TOOLBAR    = ABAP_TRUE
*    HAS_LOCATION   = ABAP_TRUE
    RECEIVING
      window         = lo_wd_window.
The problem with this is that when called from the SAP GUI, it launches a browser. I would like for it to go directly to the WebGUI version of VA03.
Is this possible?

Hi Adam,
you should be able to suspend to an ITS call.
- however you might fall foul of a bug - fixed in note 1255292 (Special characters not permitted for suspend/redirect)
Not sure if this is what is causing the issue...
Can you not pass parameters to the transaction using the CL_WDR_SAPGUI_INTEGRATION2->FIRE method?
this is what is called by the FIRE_START_TRANSACTION method, but allows for additional parameters.(I've never used it myself so I'm not sure that it would work, but would be interesting to find out - could you let us know?)
Cheers,
Chris

Two email accounts, one password for both. will check one but not the other. Have had no problems before

I have 2 email accounts for 2 people. TB will download mail for one but not the other. It can't authenticate the password. Passwords are both the same. Worked fine until today.

The amount of information makes it somewhat hard to give a specific answer. I could only recommend:
* Can you log into the account using the webmail service from your provider?
* Have you verified the settings for the account to be correct (protocol, port number, password encoding)?
The following page gives you a good start with resolving this issue:
https://support.mozilla.org/en-US/products/thunderbird/fix-slowness-crashing-error-messages-and-other-problems/fix-problems-email-providers-gmail-yahoo-etc
Hope this helps!

Looking for a DnD example that runs in the JNLP sandbox

Can somebody point be to good short example code that illustrates drag-and-drop into an application that is running in the sandbox.
The example must work with javaFileListFlavor, i.e., I'd like to drag-and-drop files into the application.

I was aware of the tutorial. It does not answer my question. None of the examples show DnD of files. I am wondering if it would be possible, since it may violate the security policy of the sandbox. Dnd of the file contents only would be good enough for my purposes, but even that seems to be impossible.

Add on for SAP 2005 B one run in the SAP 2005 A

Similar Messages

Maybe you are looking for