Add-on installation terminated during phase XPRA_EXECUTION

Hi there,
Just wondering if any of you ran into this type error while installing the BI_CONT 353.
Regards,
Joshua Z.

Hi,
here some links:
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1025030&_NLANG=EN
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=571592&_NLANG=EN
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=566917&_NLANG=EN
Hope it helps
regards
Siggi

Similar Messages

The Add-on installation terminated during phase XPRA_EXECUTION BI_CONT 703

Program terminated (job: RDDEXECL, no.: 16333200)
<ST22 >
SYNTAX_ERROR
Syntax error in program "CL_RSTRAN_TRFN_TPL============CP ".
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN_TPL============CP " in include
"CL_RSTRAN_TRFN_TPL============CM00B " in
line 112:
"The data object "L_S_TRAN" does not have a component called "ALL_FIELD"
"S"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.

Hi,
Post us the import log. Try executing /$SYNC in the command field to reset the buffer and then retry the SP updation.
Hope this solves ur issue.
Regards,
Varadharajan M

The Add-on installation terminated during phase DDIC_ACTIVATION

Hi
We have ECC 6.0 sr3 on windows 2003 with db2 9.1 database.
I am upgrading to ehp3 .
I am getting this error
The Add-on installation terminated during phase DDIC_ACTIVATION
I checked the logs it is shwoing these 2 tables.
Table FAGL_ACTIVEC was activated (error in the dependencies)
View V_FAGL_ACTIVEC_2 could not be activated
please give me some light on this
thanks

thanks for reply
this is 64 bit system
view i checked it is active but the tavle is partially active
if itry to activate that it is giving me so many errors so it is not allowing me to activate.
please help me
thanks

BI Content 353 Installation failed in phase XPRA_EXECUTION

Hi Friends,
When I install BI_CONT 353 Add-on (i.e., SAPKIBIFIH) on a SAP Netweaver 2004 (640) the installation fails in phase XPRA_EXECUTION with error 12. Looking further in the logs, I found that the real problem is that the job RDDEXECL terminates with error GETWA_NOT_ASSIGNED.
Following are support patch levels already available in my system.
SPAM/SAINT            -- SAPKD64023
SAP_BASIS           -- SAPKB64014
SAP_ABA                   -- SAPKA64014
SAP_BW                   -- SAPKW35012
PI_BASIS2004_1_640    -- SAPKIPYI66
Is there a way I could remove my Add-On.
Thanks for any advise.

Hi,
Thanks for your reply.
I installed entire system from the scratch again. Now itz working fine.
This time I have installed BI content with the default patch levels given below.
ABAP - release 640 , level 5
BASIS - release 640, level 5
BW - release 350, level 5
Later I updated ABAP,BASIS, BW patch levels from 5 to 20.

ADD-ON INSTALLATION TERMINATED IN XPRA_EXCUTION PHASE

os:HPUX11.23
db:ORACLE 10.2.0.2
SAP ECC6.0
The phase 'XPRA_EXECUTION' is terninated when I try to import SAP
SEM-BW PATCH "SAPKGS6012" into ECC6.0 system.
the erorr display as following:
Short text
Syntax error in program "/1BCDWBEN/SAPLFEN0007 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_FINB_CONFIGURATION_SERVICE=CP" had to
be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in
program "/1BCDWBEN/SAPLFEN0007 " in
include "/1BCDWBEN/LFEN0007$46 " in
line 5:
"Type "CI_DFKKREP06" is unknown"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
I try to test the program "/1BCDWBEN/SAPLFEN0007 ", the result is
please kindly find the attachmented detailed information.
BTW, I have carefully studied notes:

Hi,
Have you checked SAP note known problems with Support Packages for your release? Normally these kind of erros are recorded in that Note.
XPRA_EXECUTION :- This phase executes the XPRAs and after-import methods
The error shows, syntax error was found in the program /1BCDWBEN/SAPLFEN0007:
"The type "CI_DFKKREP06" is unknown."
You can also do a syntax check in SE38 for the program /1BCDWBEN/SAPLFEN0007, it will show the same error. You can take help of an ABAPer to see what can be done here. You should also create support message to SAP if you are not able to get any standard notes/ known error list.
Check below links. It may help you.
Re: ICR: syntax errors
http://help.sap.com/saphelp_nw04/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
Thanks,
Sushil
Edited by: Sushil Suryawanshi on Jun 1, 2009 3:25 AM

Installation stuck during phase Install Database Software

I am installing DB2 version 9.1 FP5 on Windows 2003 R2 SP2.
During phase Install database software I get the following error
Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
When i check the db2setup.log i get the following:
MSI (s) (84:68) [13:51:05:196]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (84:68) [13:51:05:196]: Running product '{F23620AE-7E17-4863-898E-7F191B39022D}' with elevated privileges: Product is assigned.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding REINSTALLMODE property. Its value is 'vomus'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding REINSTALL property. Its value is 'ALL'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding INSTALL_MODE property. Its value is 'NEW'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_LAUNCHER_RC_FILE property. Its value is 'C:\DOCUME1\ACONTR1\LOCALS~1\Temp\12\DB21.tmp'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_LOG_FILE_PATH property. Its value is 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\db2setup.log'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding LAUNCHPAD_LOCATION property. Its value is 'D:\Basis\51034846_3_DB2_LUW_91_FP5_Windows_64bit\DB2_LUW_RDBMS_91_FP5SAP_Windows\WINDOWS_AMD64\ESE\image'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Modifying DB2_COPY_NAME property. Its current value is '___NotSet___'. Its new value: 'SAPDB2TWJ'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_COPY_NAME_OVERRIDE property. Its value is 'SAPDB2TWJ'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding INSTPATH property. Its value is 'D:\db2\db2twj\db2_software'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding RSP_FILE_PATH property. Its value is 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\DB6\CENTRAL\AS\win_ese.rsp'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding SILENT_MODE property. Its value is 'ON'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_TRACE_FILE_PATH property. Its value is 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\db2setup.trc'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding DB2_INSTALL_LANG property. Its value is 'EN'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding MSINEWINSTANCE property. Its value is '1'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Modifying TRANSFORMS property. Its current value is '|:inst1.mst;D:\Basis\5103481\DB2_LU1\WINDOW1\ESE\image\db2\Windows\ESE\1033.MST'. Its new value: ':inst1.mst;D:\Basis\5103481\DB2_LU1\WINDOW1\ESE\image\db2\Windows\ESE\1033.MST'.
MSI (s) (84:68) [13:51:05:196]: PROPERTY CHANGE: Adding SETUPEXEDIR property. Its value is 'D:\Basis\5103481\DB2_LU1\WINDOW~1 CURRENTDIRECTORY='.
MSI (s) (84:68) [13:51:05:196]: Note: 1: 1708
MSI (s) (84:68) [13:51:05:196]: Note: 1: 2729
MSI (s) (84:68) [13:51:05:196]: Note: 1: 2729
MSI (s) (84:68) [13:51:05:196]: Product: DB2 Enterprise Server Edition -- Installation failed.
MSI (s) (84:68) [13:51:05:196]: Attempting to delete file C:\WINDOWS\Installer\ced05bae.mst
MSI (s) (84:68) [13:51:05:196]: MainEngineThread is returning 1639
Info 1639.Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
D:\BASIS\5103481\DB2_LU1\WINDOW~1\ESE\IMAGE\DB2\WINDOWS"
MSI (c) (E0:74) [13:51:05:305]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:74) [13:51:05:305]: MainEngineThread is returning 1639
=== Verbose logging stopped: 10/12/2008 13:51:05 ===
Please advise.

It seems that the path from where the installation has been started is too long. So you have to shorthen the following path were the RDBMS-software was copied to.
Current path (might be much longer, because of ~ placeholders):
D:\Basis\5103481\DB2_LU1\WINDOW~1\ESE\image\setup.exe
Please copy the RDBMS-DVD to an other shorter path, so that the path to setup.exe is e.g.
D:\short_path\WINDOWS_I386\ESE\image\setup.exe
The problem here is not the lentgh of this singel path. The problem is that in several steps this path will be multiplied in length until the limit is reached. Then the installation will fail.
Please try again with the shorter path.

EHP installer terminated during PREP_INPUT/INITPUT_PRE

Hello,
I am using SAP EHP installer tool to update our XI systems (dual stacks) which are currently on SAP Netweaver 7.0 SP12.
When I run the EHPI, it fails in the PREP_INPUT/INITPUT_PRE phase with the following error:
This trouble ticket was created by SAPehpi on 20100215124151
SAPehpi broke during phase INITPUT_PRE in module PREP_INPUT / Parameter input
Error Message: Write access to directory /usr/sap/transXI denied.
Summary of SAPehpi:
SAPehpi Release:     7.10/1
SAPehpi Version:     SAPehpi version 7.10/1
Start Release:
Target Release:          700
Any idea how I can proceed with the installation? Your help is highly appreciated.
Thanks,
Ajay

> Give 777 permission on folder /usr/sap/transXI and then repeat this phase.
"777" is a bad idea, EVERY user able to logon to the system can (by intention or by accident) delete the whole directory.
Most likely /usr/sap/transXI is an NFS mounted directory (to enable transports). In that case the permissions has to be set on the NFS server, a "chmod 777" will not work if it's NFS mounted.
Markus

ECC5 installation error during phase "Create Database"

We are installing ECC5 on IA64 using Oracle 9207.
At phase 'Create database' the sapinst aborts reporting errors executing the oradim -NEW SID command.
The oradim.log contains one row only : "DIM-00019: error creating service".
The OracleServiceSID is created, but it does not start.
If we try to run manually the command "Oracle.exe SID", so the same command that is started by the OracleServiceSID service a popup appear saying:
"The entry point kdr9ir2_pop could not be located in the dynamic link library oracle oracommon9.dll"
Any idea ? Are there problems with the oracle 920 sw installation or what ?
regards

Hi,
Sounds like oracle problem.
- Please post the last few error statement from sapinst_dev.log.
- Check if the the following key is in the registry:
HKEY_LOCAL_MACHINE\system\currentcontrolset\services\OracleService
- check oracle alert<SID>.log, see if there is any significant errors.
- see note #602843
- if "DIM-00019: error creating service", does it mean that an Oracle service with the same SID already exist? if so, use command "sc delete [service name]" to delete the service and then restart the installation.
Hope this helps.
cheers,
Vincent

Error in XPRA EXECUTION Phase of Add On installation in SAP sys in SAINT

Hello All,
I have tried to install VERSANH ADD On on my SAP System with SPAM Version 7.00 <0032 kernal level 48.
i have run transaction SAINT imported all PAT and ATT files and started the process.
now after running around 16 Hrs it is throwing error in XPRA EXECUTION Phase.
The Error is
The Add on installation terminated during phase XPRA EXECUTION
Choose CONTINUE to continue the import
Choose BACK to delete the installation queue
Choose LOGS to display the import logs
i have clicked on Continue, the it process and after 1 Hr throws same error
i have navigated to OS Level in usrsaptranslog and there in log i am getting this line as error
ERROR RFC function TRINT PROGRESS INDICATOR returned 18
Thanks in advance.
Edited by: Vinit Soni on Apr 14, 2009 11:05 AM
Edited by: Vinit Soni on Apr 14, 2009 11:06 AM
Edited by: Vinit Soni on Apr 14, 2009 11:07 AM
Edited by: Vinit Soni on Apr 14, 2009 11:08 AM

Please check the log files under /usr/sap/trans/tmp directory. There will be some information about the error and paste the log here to analyze the problem.
Regards,
Subhash

The Add-on installation is currently in phase DDIC_ACTIVATION

Dear All,
I am applying the addon "ST-A/PI" on SAP ERP 6.0. The status "The Add-on installation is currently in phase DDIC_ACTIVATION" has been there for a few hours now whereas the sap note says it should end in 12 mins approx.
Could you please help in resolving the issue. This is very important.
Thanks
Best Regards,

Welcome to SDN,
You can't change the existing queue if the SPAM status is DDIC_ACTIVATION.
Can you please check the SPAM --> goto --> import logs.
You need to raise an OSS message if you want to reset the SPAM queue.

MCOD installation fails during Database instance phase "CREATE TABLESPACES

We are installing solution manager 3.2 using MCOD option on windows 2003/oracle. Installation fails during Database instance phase "CREATE TABLESPACES" step without any error. Interesting thing is no error message in installation log or oracle alert log.
Installation Details
First instance: SMD / Instance number: 00 / schema: sapsmd / Database SID: SMD
Second instance; SMQ / Instance number: 01 / schema: sapsmq / Database SID: SMD
Did any one come across this issue? Any help is greatly appreciated.
Thanks

Hi,
Did u checked for the Space utilization on the drives.Normally when installation fails there will be some intimation of the cause in the log files written in the sapinst directory.IF it is failing in the tablespace creation phase the that means that the data files cannot be created.
It depends on the database you use: Data files(Oracle), Containers (DB2).
Do check in the sapdata directories whethere the data file have created.
If its not giving you any error then the installation might got stuck bcoz of some memory problems during the "create tablespace phase"
Regards
Ashly.

IDT (Beats) software installation fails during configuration phase

System: HP Pavilion dv7-6b70ed
OS: Windows 7 Ultimate 64 bits
I lost access to the Beats Audio Control Panel for reasons unknown and decided to reinstall the software. The installation seems to go fine, until I got the configuration screen one gets after restarting the system. The installation terminated with an "unknown error", after clicking the finish button.
It appears to be a problem, because my laptop sounds like having a severe cold. Anybody an idea?
thanks .... H

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load,
Now use the Microsoft 'Fixit' on the link below to install the IDT Audio software.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

BI 7.0 Java Add-on installation hangs

Hi Guru's
While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
The environment is HP-UX IA64 with oracle 10g.
Thanks in advance.

Hi Rajesh,
What stage is the installation hanging at ?
Please provide any error info from sapinst_dev.log
Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
e.g. check std_server0 to see if the server is up or not
Please send more details
Regards,
Snehal

OTEXBAS add on installation error: table ZAUTHCUST does not exist

HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request   : SAPK-301COINOTEXBAS
System              : SPS
tp path             : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
        Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
        Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
        Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
        Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
        Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===

Mamta:
I am not sure why you post these in the SAP for Utilities space. this is for the Utilities industry. I will move this one to ILM.
regards,
bill.

Error importing SP in Solution Manager System (phase XPRA_EXECUTION)

Dear community,
I have a fresh installation of Solution Manager System 7.1 (central system) in a test environment.
During post-installation I wanted to apply SP (user DDIC, client 000), but my update queue via SPAM failed in phase 23 (XPRA_EXECUTION) and I have no idea how to handle that. Error message:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-70203INSAPBSFND, tp step R, return code 0008
To check the cause of the error it is recommended to choose Goto -> Log -> Queue.
Choosing Goto -> Action Log, I find:
Error during executing the tp command 'tp XPA ALL SOL ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors', tp output:
Choosing Goto -> Import Logs -> tp system logs, I find:
START EXECUTION OF REPORTS SOL R      20120104111325              DDIC         biss-labor01
START tp_getprots          SOL R      20120104111325              DDIC         biss-labor01
ERROR SAPK-70203INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC         biss-labor01
ERROR SAPK-70204INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC         biss-labor01
ERROR SAPKITL701           SOL R 0008 20120104111335 STUSER       DDIC         biss-labor01
STOP tp_getprots          SOL R      20120104111338              DDIC         biss-labor01
STOP EXECUTION OF REPORTS SOL R      20120104111338              DDIC         biss-labor01
An excerpt (3 lines) from ulog:
APServiceSOL 20120104122229 RFC: tp SHOWPARAMS SOL pf=
biss-labor01sapmnt     rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt     rans (pid=6232)
APServiceSOL 20120104122229 RFC: tp CONNECT SOL pf=
biss-labor01sapmnt     rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt     rans (pid=6232)
APServiceSOL 20120104122231 RFC: tp XPA ALL SOL pf=
biss-labor01sapmnt     rans inTP_DOMAIN_SOL.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=
biss-labor01sapmnt     rans (pid=6232)
What I already tried:
- retry importing
- stop and start the system, then retry importing
- check for background jobs (rdd* ) that failed via transaction SM37, but there are none that have been canceled
- reset buffers via transaction /$sync
Any input, suggestions or help is highly appreciated!
Regards
Sönke

Hi Sönke,
it seems we are making progress at last.
I'm afraid I didn't make my suggestion about splitting items very clear. I meant to say try applying your SPAM queue in several parts splitting up the packages affected so they are applied individually.
SAPK-70203INSAPBSFND
SAPK-70204INSAPBSFND
SAPKITL701
SAPKB70207
I think default behaviour for SPAM/SAINT is to calculate the entire queue automatically based on EPSIN but you can override this behaviour and choose to split your queue into shorter ones, you simply choose carefully the last package, apply this queue, then choose the next queue and so on until you are done. There used to be special notes which had recommended split points for package queues
EDIT: I checked your link and I don't think it is helpful unfortunately.
Best regards,
Mark.
Edited by: Mark Birch on Jan 11, 2012 2:07 PM

Add-on installation terminated during phase XPRA_EXECUTION

Similar Messages

Maybe you are looking for