ADD-ON INSTALLATION TERMINATED IN XPRA_EXCUTION PHASE

os:HPUX11.23
db:ORACLE 10.2.0.2
SAP ECC6.0
The phase 'XPRA_EXECUTION' is terninated when I try to import SAP
SEM-BW PATCH "SAPKGS6012" into ECC6.0 system.
the erorr display as following:
Short text
Syntax error in program "/1BCDWBEN/SAPLFEN0007 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_FINB_CONFIGURATION_SERVICE=CP" had to
be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in
program "/1BCDWBEN/SAPLFEN0007 " in
include "/1BCDWBEN/LFEN0007$46 " in
line 5:
"Type "CI_DFKKREP06" is unknown"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
I try to test the program "/1BCDWBEN/SAPLFEN0007 ", the result is
please kindly find the attachmented detailed information.
BTW, I have carefully studied notes:

Hi,
Have you checked SAP note known problems with Support Packages for your release? Normally these kind of erros are recorded in that Note.
XPRA_EXECUTION :- This phase executes the XPRAs and after-import methods
The error shows, syntax error was found in the program /1BCDWBEN/SAPLFEN0007:
"The type "CI_DFKKREP06" is unknown."
You can also do a syntax check in SE38 for the program /1BCDWBEN/SAPLFEN0007, it will show the same error. You can take help of an ABAPer to see what can be done here. You should also create support message to SAP if you are not able to get any standard notes/ known error list.
Check below links. It may help you.
Re: ICR: syntax errors
http://help.sap.com/saphelp_nw04/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
Thanks,
Sushil
Edited by: Sushil Suryawanshi on Jun 1, 2009 3:25 AM

Similar Messages

The Add-on installation terminated during phase DDIC_ACTIVATION

Hi
We have ECC 6.0 sr3 on windows 2003 with db2 9.1 database.
I am upgrading to ehp3 .
I am getting this error
The Add-on installation terminated during phase DDIC_ACTIVATION
I checked the logs it is shwoing these 2 tables.
Table FAGL_ACTIVEC was activated (error in the dependencies)
View V_FAGL_ACTIVEC_2 could not be activated
please give me some light on this
thanks

thanks for reply
this is 64 bit system
view i checked it is active but the tavle is partially active
if itry to activate that it is giving me so many errors so it is not allowing me to activate.
please help me
thanks

The Add-on installation is currently in phase DDIC_ACTIVATION

Dear All,
I am applying the addon "ST-A/PI" on SAP ERP 6.0. The status "The Add-on installation is currently in phase DDIC_ACTIVATION" has been there for a few hours now whereas the sap note says it should end in 12 mins approx.
Could you please help in resolving the issue. This is very important.
Thanks
Best Regards,

Welcome to SDN,
You can't change the existing queue if the SPAM status is DDIC_ACTIVATION.
Can you please check the SPAM --> goto --> import logs.
You need to raise an OSS message if you want to reset the SPAM queue.

The Add-on installation terminated during phase XPRA_EXECUTION BI_CONT 703

Program terminated (job: RDDEXECL, no.: 16333200)
<ST22 >
SYNTAX_ERROR
Syntax error in program "CL_RSTRAN_TRFN_TPL============CP ".
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN_TPL============CP " in include
"CL_RSTRAN_TRFN_TPL============CM00B " in
line 112:
"The data object "L_S_TRAN" does not have a component called "ALL_FIELD"
"S"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.

Hi,
Post us the import log. Try executing /$SYNC in the command field to reset the buffer and then retry the SP updation.
Hope this solves ur issue.
Regards,
Varadharajan M

Add-on installation terminated during phase XPRA_EXECUTION

Hi there,
Just wondering if any of you ran into this type error while installing the BI_CONT 353.
Regards,
Joshua Z.

Hi,
here some links:
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1025030&_NLANG=EN
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=571592&_NLANG=EN
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=566917&_NLANG=EN
Hope it helps
regards
Siggi

Error in XPRA EXECUTION Phase of Add On installation in SAP sys in SAINT

Hello All,
I have tried to install VERSANH ADD On on my SAP System with SPAM Version 7.00 <0032 kernal level 48.
i have run transaction SAINT imported all PAT and ATT files and started the process.
now after running around 16 Hrs it is throwing error in XPRA EXECUTION Phase.
The Error is
The Add on installation terminated during phase XPRA EXECUTION
Choose CONTINUE to continue the import
Choose BACK to delete the installation queue
Choose LOGS to display the import logs
i have clicked on Continue, the it process and after 1 Hr throws same error
i have navigated to OS Level in usrsaptranslog and there in log i am getting this line as error
ERROR RFC function TRINT PROGRESS INDICATOR returned 18
Thanks in advance.
Edited by: Vinit Soni on Apr 14, 2009 11:05 AM
Edited by: Vinit Soni on Apr 14, 2009 11:06 AM
Edited by: Vinit Soni on Apr 14, 2009 11:07 AM
Edited by: Vinit Soni on Apr 14, 2009 11:08 AM

Please check the log files under /usr/sap/trans/tmp directory. There will be some information about the error and paste the log here to analyze the problem.
Regards,
Subhash

OTEXBAS add on installation error: table ZAUTHCUST does not exist

HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request : SAPK-301COINOTEXBAS
System : SPS
tp path : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
 Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
 Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
 Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
 Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
 Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===

Mamta:
I am not sure why you post these in the SAP for Utilities space. this is for the Utilities industry. I will move this one to ILM.
regards,
bill.

PI_BASIS 2006_1_700: Add-On Installation in IMPORT_PROPER

Hi Experts
We have installed ECC 6.0 on windows(Oracle 10g) environment. when i tried to import PI_BASIS 2006_1_700: Add-On Installation, it is keep on running in the phase IMPORT_PROPER from last 15 hrs
Also, in SM50 it is showing on workprocess running for long and gets terminated. also we have run SGEN after the BASIS ,ABA SP13 installation was over.
DIA 732 Running Yes 1341 SAPMS38L 000 DDIC Delete D010INC
it seems it is trying to delete D010INC this table and i scheduled the support packs in Background and the status is on hold and reason is rfc.
can anyone suggest what the problems would be..
Thanks and Regards,
Laxman

Hi,
Check the logs in SPAM also try to reimport once again. It would reslove the issue.
I assume that you have already installed the add-on component for pi_basis.
Regards,
Vamshi.

BI 7.0 Java Add-on installation hangs

Hi Guru's
While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
The environment is HP-UX IA64 with oracle 10g.
Thanks in advance.

Hi Rajesh,
What stage is the installation hanging at ?
Please provide any error info from sapinst_dev.log
Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
e.g. check std_server0 to see if the server is up or not
Please send more details
Regards,
Snehal

SAP add-on installation

Hi experts. Sorry in advance (dunno if it is correct place for this question)!
I have created add-on installation (It works correctly 100%, already was implemented).
Data base on current system was restored and now when I try to install this .pat file in SAINT transaction I have following error :
-   Error in phase: CHECK_REQUIREMENTS
-   Reason for error: QUEUE_NOT_EMPTY
-   Return code:
-   Error message:
I have triyed to run OCS_RESET_QUEUE function module, but it did not help.
Thanks for any information in advance!

The correct space would have been SAP NetWeaver Administrator or SAP NetWeaver Application Server. Anyway, there must be something in the transport directory (e.g. /usr/sap/trans) indicating that the request(s) are still being processed. Did you confirm the queue when you previously installed the add-on? Before the system restore?

SAP Secure Store error at Java add-in installation

During the Java add-in installation, at phase "Install Java Engine", I get the error "A key/value pair with this key already exists in the store".
How can I fix it?
[ECC6]

Sorry for not making clear.
To uninstall java stack:
1. Drop the J2EE DB schema (the db schema for this one SAP SID). Be very
careful not to drop the DB schema for another existing system or the
ABAP system since it will destroy your data.
2. Remove DIR_GLOBAL/security/data
3. Remove DIR_INSTANCE/SDM
4. Remove DIR_INSTANCE/j2ee
5. Revert CI instance profile to their original state (backup copies
should exist in the profile directory)
6. Deinstall SCS using SAPinst
7. Restart ABAP
This should remove the java stack without affecting the ABAP system.
Then the correct order for installation will be:
1. Install Central Services Instance (SCS) Java Add-In
2. Install Database Instance Java Add-In
3. Install Central Instance Java Add-In
cheers,
Vincent

Java add on installation in ECC 6

Hi all,
We are having ECC 6 already in place and our client requirement is to install java add on the same in ECC instance. In the installation master I have selected the Netweaver system , followed by sap system and then java add in for abap system.
This is the step which i am following for java add in installation. I am not sure whether i am in the right process. Could you please suggest the porcess?
Regards
Vijay

Thanks Rohit,
For the immedite response.
In the phase of Java system RFC connection. I have provided the SAP SYSTEM LOG in details.
That is SAP client as : 300
DDIC password : password
The problem is not accepting by ddic passowrd and throwing an error by saying the password which you have provided is wrong. But i can able to log in sap level by using the same password in the same client.
Why is not accepting the password? Eventhough the password is right and also i can able to login in sap level.
I am sure about i didnt do silly mistakes like caps lock or mistyoing or key board issues. And also I have tried the standard passwords like 19920706,minisap and the master passwords.
After the third attempt in installation,m the user is get locked. I will unlock and will try again. Even I tried to change the password in sap level and its not working in the installation.
Anyone have any idea on this??
Kindly suggest
Thanks and Regards
Vijay kumar

Excel Add-In with Terminal Services

Hello Everyone Does anyone have any experience using the Excel Add-In with a terminal services session (remote desktop)? Local box administrators have no issues but when a non admin user starts MS Excel, they get a VBA runtime error (essexcln.xll not found) Closing that window and attempting to install the add-in via Tools >> Add-Ins >> and browsing to the essexcln.xll file returns the error "essexcln.xll is not a valid add-in" Seems to be a rights issue but the users have full rights to the folder where the add-in is located (Hyperion\AS\bin\) . Thanks in advance for any tips.

Check the file permissions on c:\winnt\system32\msvcr71.dll. This needs to be 'Read/Execute' for 'everyone'. The add-in installation only gives permissions to the User who is installing the add-in. Which causes problems when other users need to access the Add-in. (Similar problem on Citrix / TS). James Archer

Add on Installation Error.

Hi,
I removed Addons in Add and Remove and in C:\Program
Files\SAP\SAP Business One\AddOns.
After iam installing Add on it's showing Error LIke
Add on TDS:Add on Installation failed bacuse another versione
ia already installed.please ensure that the verione number is
higher than the versione installed. not only TDS it's showing
Copy express, XL reports.can i remove .sbo files in SAP B1
file.

Hi,
Please take a look at note 819501 on the steps to clean corrupt installation of add-on(s).
For XLR clean remove, follow the steps below.
1. Un-register all addons from Business One> Add On Administration.
2. Log into the company again to refresh it, uninstall process will continue.
3. Close Business One, check from Add Remove Programs, if XLR is still shown, delete it.
4. Delete following files from B1 installation folder
-> by default itu2019s C:\Program Files\SAP\SAP Business One
*AddOnsInstall.sbo
*AddOnsLocalRegistration.sbo
5. Delete folder C:\Program Files\SAP\SAP Business One\AddOns
6. Open SQL server, Delete Database IXMetaDataSBO.
7. In company database, delete all tables starting with ixt and ixv
8. click windows Start> Run> type '%temp%', rename SM_OBS_DLL folder.
for example 'SM_OBS_DLLOld' or delete it.
9. Open Register, delete XLR foler if it exists under
HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP Manage\SAP Business One\AddOn\
10. Delete folder iLytix from HKEY_LOCAL_MACHINE\SOFTWARE.
10.Reinstall XLR
In addition, it's not recommended to remove Addons from Add and Remove programs. You can remove AddOnsInstall.sbo and AddOnsLocalRegistration.sbo.
Hope it helps.
Regards,
Jacqueline Jiang
SAP Business One Forums Team

Can't start SAP after Java add-in installation

Hi,
We have migrated our BW 3.1C system to BI 7.0 (Win2003, Oracle 10.2, non-unicode). Everything was OK with the Abap system upgrade. Now we are making a BI Java installation over the BI 7.0 Abap system (Java add-in installation). We have made the first step, SCS instance installation and now the SAP BI 7.0 abap system doesn't startup.
The workprocess fail to connect to Oracle and don't startup:
M Fri Dec 07 22:47:00 2007
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C Prepending F:\usr\sap\BWK\SYS\exe\run to Path.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c      2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c      1986]
B ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
Any idea about how to solve the problem?
Thanks in advance!

Hi,
ORA_NLS33 is not set as environment variable. We uninstalled the J2EE so now everything should be non-unicode and SAP should startup but we continue with the same error.
Some more info...
DW log info when everything was ok:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C    assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPBWT's password
C Connecting as /@BWK on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1   048D7FA8   0BD02454   0BD01CDC
C Attaching to DB Server BWK (con_hdl=0,svchp=0BD01C28,svrhp=0BD04A24)
C Starting user session (con_hdl=0,svchp=0BD01C28,srvhp=0BD04A24,usrhp=0BD25D68)
C
C Thu Dec 06 18:00:20 2007
C Now '/@BWK' is connected (con_hdl 0, nls_hdl 0).
Actual DW log with the errors:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C    assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c      2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c      1986]
B ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
There is no "C Nls CharacterSet..." line, the problem must be something regarding NLS charactersets, non-unicode/unicode issues...
But we don't know how to solve the problem.
Any idea?
Thanks again,
Jon

ADD-ON INSTALLATION TERMINATED IN XPRA_EXCUTION PHASE

Similar Messages

Maybe you are looking for