ADD On of Quality Management

whr i can find Add on on Quality Management
Quality Management
Quality Planning       Need Addon
Quality Notification          ""
Quality Inspection (Raw materials in Procurement and Finished products in Production)   "",
Test Equipment Management

Hi,
   For Test Equipment Management here is the link for SAP library:
http://help.sap.com/saphelp_nw04/helpdata/en/2d/352209448c11d189420000e829fbbd/frameset.htm
For quality notification.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e6143462a11d189000000e8323d3a/frameset.htm
Hoping this might help you in your query.
Have a best day ahead.

Similar Messages

  • Cisco Quality Manager 8.5 "Domain could not be validated" error

    Hi
    Has anyone encountered this error when they attempt to add domain to Quality Manager?
    I need to understand how I can fix this problem?
    Marsha

    My issue is stil not received, i hav send a document to the system team to follow for the integration. The AD configuration for QM shud be very expicit or else integration will not work. I am attachin the doc here. Let me knw if that helps.

  • Create Quality Management view for a Material in background mode

    I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
    The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
    I want to create inspection setup for a material which does not have QM tab.
    I have to create everything is background mode. BDC is one option which I am list interested in.
    Thank you for helping in advance.

    Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.

  • Licensing Issue Quality Management 9.0 with UCCX 8.5

    Hi guys,
    The UCCX compatibility matrix, Cisco WFO System config Guide plus QM 9.0 installation guide all state QM9.0 is compatible with UCCX 8.5(SU3).
    We have ordered QM9.0 licenses using part number
    L-CCX-90-QM-L-K9=:L-CCX-90-QM-L-K9= : CCX 9.0 Quality Manager Server , 10 Seats LICENSE ONLY
    I am unable to add these licenses to our UCCX server as I am getting:
    Error: The Cisco Unified CCX Quality Manager Seat feature (2nd line) of xxxxx.lic has unsupported version number (9.0)
    Has anyone installed QM9.0 with UCCX 8.5 and if so what licenses did you have to purchase?
    Thanks!

    I have not done this yet, I was looking into getting the license to do same you are doing.  Thanks for the heads up. I will wait to see outcome of your attempt.
    My main drive to go to 9.x is to get IE9 32 bit support with the latest 9.x SR as I have a handful of supervisors who have Windows 7 and using it to play back recordings, etc and I'm tired of the compatibility issues and time spent on their PCs to keep it running after they do other updates, etc.  Was hoping 9.x with the IE9 and 32 bit support would help with those headaches.

  • Quality Management Scoring

    Hi All,
    Can anybody explain me how the system calculates Quality score (which gets reflected in Vendor Evaluation)?.....any formula or principles etc
    Is there any configuration setting the QM side which helps in controlling that score?
    Requirment - It is intended that one critical defect should not be easily overcome by success on other less critical tests. Currently, it has been set in QM as such the quality score is getting 80 irrespective of pass or fail of many tests
    Thanks

    Hello,
    The score *Goods Receipt (main criterion quality)* is calculated as follows:
    1.     If a material is subject to incoming inspection, part of the delivered material is checked by the quality assurance department when goods are received against a purchase order.
    2.     An inspection lot is created. After the inspection or testing, the person responsible in Quality Management then enters a result and makes a decision as to whether the material can be used.
    3.     All the incoming inspection lots are stored in a file with their scores.
    4.     When you run an automatic re-evaluation for a vendor, the system selects all the incoming inspection lots for the vendor that lie within the validity period and calculates the average of the scores.
    The result is the vendor's score for the quality of goods received.
    The *Quality Audit (Main Criterion "Quality")* score is calculated as follows:
    A quality audit has taken place in one of your vendor's plants. This means that either your own company has carried out a check to determine how the vendor ensures that his products are of a high quality, or the vendor has carried out the audit himself.
    1.     An audit lot is created by Quality Management. When the audit has been completed, the person responsible determines a score for this audit lot.
    2.     All the audit lots are stored in a file with their scores.
    3.     When you run an automatic re-evaluation of a vendor, the system selects all the audit lots for the vendor within the validity period.
    4.     The parameter Quality audit is read from Customizing.
    5.     If the indicator is set, the system calculates the average score for all the quality audits in the validity period. The result is the vendor's score for the quality audit.
    If the indicator is not set, only the most recent audit lot is included. This then represents the vendor's score for the subcriterion.
    The Evaln. QM system field on the screen for the main criterion "Quality" shows you the score that was awarded to the Quality Management system (e.g. ISO 9003 with certificate) used by the vendor. It is only displayed if the Prev. QM system field is filled in the vendor master record. The score is awarded by the QM system and is for information purposes only. Display the vendor master record to see which quality system the vendor uses. You can use the content of the field for your own program and have this score included in the vendoru2019s quality score.
    Complaints/Rejection Level (Main Criterion "Quality")
    The score for the subcriterion Complaints/Rejection Level is computed by the SAP component QM Quality Management and passed on to the MM Vendor Evaluation component.
    If the scale for the key quality data in the QM system does correspond to the scoring range in Vendor Evaluation, the Vendor Evaluation system converts the QM data for use in the Vendor Evaluation scoring system.
    The score is calculated as follows:
    9.     On the shop-floor, material A supplied by vendor ACME is being processed in the course of production.
    10.     If the material is OK (that is to say, no quality notifications have been entered for material A during the entire validity period), the vendor is awarded the highest score for the material (100 points).
    11.     If the material is found to be defective, a quality notification (such as a rejection note or nonconformance complaint sent to the vendor) is entered.
    12.     During the vendor evaluation process, the system checks whether the costs associated with the faulty delivery exceed the maximum percentage of business volume defined in the Customizing system.
    In the above example, your business volume with (value of purchases from) ACME amounts to one million dollars annually. The costs associated with defective deliveries may not exceed 0.1 percent of business volume, i.e. $100,000. The costs associated with a quality notification are estimated at $500.
    13.     If the costs that your company incurs as a result of the faulty materials are lower than the defined proportion of business volume, the system calculates a score between 1 and 99 points.
    To do this, the system multiplies your annual business volume with the vendor ($1,000,000) by the parameter Business volume share (0.1).
    The number of accumulated quality notifications (10 in all) multiplied by the cost of each notification ($ 500) is subtracted from this.
    The result is divided by the annual business volume multiplied by the proportion of business volume.
    The result of this is a factor which, multiplied by a hundred, gives a percentage.
    This percentage indicates the quality provided by the vendor in relation to the particular material. The value 95% in the above example means that complaints or rejections involving the vendor ACME only resulted in 5% of the maximum costs allowed, i.e. the quality is very good.
    Note on Scoring Range and Conversion QM - MM:
    Since the minimum points score that can be obtained is not 0 (0 means "not evaluated") but 1, only 99 points are available in the range 1 to 100.
    This is why the system works out how many points out of 99 the value 95% corresponds to.
    The result is 94 points.
    Since the bottom of the scoring range has been moved up by one point (1 point is the worst score not 0), the system adds on 1 point.
    ACME therefore achieves a score of 95 points for the subcriterion Complaints/Rejection Level for material A.
    14.     If the cost of defective or non-conforming deliveries exceeds the share of business volume defined in Customizing (in this case $100,000), the vendor is awarded the lowest score (1 point).
    The score for the subcriterion Complaints/Rejection Level is computed by the SAP component QM Quality Management and passed on to the MM Vendor Evaluation component.
    You can find this information in help.sap.com
    I hope it helps!
    Best Regards,
    Arminda Jack

  • Cisco Quality Management 8.5 license error

    Dear networkers,
    After installing the Cisco Advanced Quality Management product (from DVD) and while configuring the "site configuration setup" and after clicking on next button; we face the following error message :
    "Invlaid License : The number of maximum users muste be greater than 0" (message attached)
    Can you please advice ?
    thanks in advance.
    Cdt.

    Hi haouaswajih,
    Please check the below errors,
    QMLC2003
    Text:The maximum number of user licenses must exceed zero for the bundle
    Type:Error
    Add’l Info:For the specified bundle, the maximum number of users licensed must exceed zero.
    Action:This should be configured by the system administrator.
    QM1015
    Text:Maximum number of users on the license bundle type {0} is zero.
    Type:Error
    Add’l Info:Maximum number of users on the license bundle type is zero.
    Action:Contact Cisco Technical Support.
    Reference:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/workforce_optimization/qm_8x/reference/guide/qm852-ecd-cisco.pdf
    Hope this helps.
    Anand
    Pls rate helpful posts !!

  • Cisco Quality Management: 8.5.2.18. Recording only one agent.

    Good day! There are a cluster of two CUCM (8.5.1.13900-5), UCCX (8.5.1.11004-25, Licence – Enchanced), Cisco Quality Management (8.5.2.18), Cisco IP Comunicator as agent's phone (using SCCP for a registration) at the deployment. When I login in the Cisco Unified Workforce Optimization, I see only one of agent's recording, although I see four agent who are configurated at Quality Administrator Managment . I noticed the only one of difference among the agents. It's the field "Name Dialing" at User Configuration of CUCM (I reckon it doesn't matter). But possibly I need to set a configuration at local computers agents. When I tried to fix the my issue and I couldn't find the Device name for JTAPI user at CUCM. I add the Device and I have a question. Do I have to add only Device or CTI as well? I attached the screenshot "JTAPI". It is the configuration of application user at CUCM. Could you help me with recomendations for fixing this issues?

    Hi
    My first suggestion would be to look at your AQM config. AQM uses CTI as well, and may be set up with a different user for JTAPI.
    I typically set AQM and UCCX to use the same user (the one specified for RM-CM in UCCX) so that if an agent works for UCCX, he will work for AQM - for JTAPI at least.
    Regards
    Aaron

  • Quality Management query

    Dear friends I am looking for
    -Quality Management Blue print finalization related sample Questionnaire.
    also i want to ask
    - If inspection lot is already created & we changed some master data can we see the changes in the same inspection lot? If yes how?
    Thanks & Regards
    Swanand

    Sorry to say you links provided by you didn't help me, i am looking for Quality Management Blue print finalization related sample Questionnaire.
    Now coming to why i need it because i am involved in one of project & i need to finalize Blueprint...........so looking for the same.
    Again for 2 query answer........while referring SDN i got the following solution ........please have a look.........fortunately answer is given by Shyamal only
    Dear Pravin,
    It is clear that when you have added the MIC to the inspection plan the inspection lot was already released (Status 'REL'). It means system has already read the inspection plan data for the inspection lot. If then you amend any thing to the inspection plan it will not incorporated in the inspection lot hence lot has already read the plan data.
    So now to rectify it if you have not started the RR, then Go to inspection lot change mode (QA02),,then follow the path. Inspection lot->Function->Withdraw Approval.
    Then Run trx QAC3 to cancel the generated physical samples If there any.
    Then again go to QA02 and again assign the inspection plant to the lot. (Remember here the Key Date must be later then the change you have done in the Inspection plan.)
    Now the inspection plan with the added MIC will assign to the lot and that will be appeared for RR.
    And If you have already started in the RR, then you can't do the above ratification activity. so simply add the same MIC to the RR as Un-planned MIC. record the Results.
    Regards,
    Shyamal
    Regards
    Swanand

  • Quality Management During Goods Receipt (Inspection Lot)

    Hi all,
    >>>>>>>>>>>>
    REQUIREMENT
    <<<<<<<<<<<<
    I have a requirement that i need to write an interface program which will receive a file from external agency (manufacturer) and process goods receipt until inspection results. The following steps need to be taken care of;
    1) Create a equipment (Utilities - It is an unique identifier for each unit of the material).
    2) Do Goods Receipt for the PO with the equipment numbers created.
    3) Create Inspection Lot for the material document created during the GR for each equipment number.
    4) Execute Inspection Result.
    >>>>>>>>>>>>
    INFO NOW
    <<<<<<<<<<<<
    Inspection lot can be created from MIGO directly by SPRO config and MM master data maintenance.
    >>>>>>>>>>>>
    DONE
    <<<<<<<<<<<<
    Called BAPI to create Equipment.
    Called BAPI to create Goods Receipt.
    Inspection Lot Settings to create lots during MIGO
    1) New Inspection Type Created as SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection types. The maintenance is a copy of type 01.
    2) Assign Inspection Type to Lot Origin at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection Types. SG1 is maintained against lot origin 01 with variant 01.
    3) Set Default values for SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Define Default Values for Inspection Type with parameters same as for 01.
    4) In Material master for the record set the inspection setup in the quality management tab. put SG1 as active and preferred. Also set Post to insp Stock, Insp with task list, Auto Assign, Skips allowed, Serial Numbers poss, Control Insp lot as For each Material Doc Item.
    I have to kow how to select the Inspection Plan for the lot and thus set the status of lot to released and get it ready for results.
    I also have BAPI ready for Inspection Result.
    >>>>>>>>>>>>
    TESTING
    <<<<<<<<<<<<
    I have tested it and was working fine till last thursday. I have the above mentioned settings even now in the system. Can there be anything else which the functional consultants would have change that affected the process. Anyways now the inspection lot is not getting created for the Inspection during MIGO and I am really struggling to find the exact reason.
    For your info, I am working mostly on Utilities and so do not have much idea about the quality management stuff.
    >>>>>>>>>>>>
    QUESTION
    <<<<<<<<<<<<
    Why the inspection lot is not getting created during MIGO for my scenarion?
    How to select the inspection plan in the program?

    deleted

  • Inspection setup in view quality management update in material master

    Hi all,
    We are using BAPI_MATERIAL_SAVEDATA for our material master updation.
    Here one  of the change in the program is to update the inspection setup in the view quality management.
    Can anybody tell in which stucture of the bapi BAPI_MATERIAL_SAVEDATA  i can pass the values of the inspection set up fields.If not is there any other bapi through which can be done?
    Thanks in advance.
    regards
    Nazmul

    Hi,
    To deactivate the Inspection Types for materials, you can use transaction QA08.
    Here use tab "Deactivate insp. type" and specify the inspection type which you want to dactivate.

  • Quality Management v9 - Recording file is .spx and size of 0 kb

    Guys,
    I have theses versions here :
    CUCM v9.1.2
    Quality management 9.0.1.57
    UCCX 9.0.2.11001-24
    Desktop are connected on the PC port of the phone !
    I want to do the desktop recording and I have an issue where the storage location contains only .spx files that are empty with 0 bytes.
    Here is the troubleshoot I did :
    From the Recording interface I can see all the conversation but I can't play it.
    If I use wireshark I can see the RTP on the destop, I can convert it and listen that RTP stream..so the stream is going to PC
    If I run the QMDump on the desktop of the agent I see the G711 Ulaw which is good but I can't find Skinny hearts beats ( logs of QMdump Attatch ).. I rebooted the phone but still..
    I see on the troubleshooting guide, that this situation could be during the conversion process, it says we need to get logs and escalate the case.
    Anyone have a suggestion ?

    Mary,
    this issue pertains to either not receiving a SIP invite to start recording, or not receiving the actual RTP from the phone.  More than likely it is not receiving a SIP invite.  Check the (WFO 9.0 "Recordserver.dbg") or (WFO 10.0 "Ctiservice.dbg") logs , look for INVITE, it should tell you if you received it or not.
    Example of a good SIP invite:
    SIP: IN|INVITE sip:[email protected]:5060 SIP/2.0|6156255c|10.192.252.36:32880->10.32.2.66:5060|Call-ID: [email protected]|From:
    Example of a BAD SIP response:
    type=Network Recording,person=140]] call CiscoCall[Call[2:20211600];ConnectionId=31651532] should have received SIP but didn't!
    If you are getting a SIP invite, then check the ports between Phone and Recordserver to ensure RTP can get through.
    If you are NOT getting a SIP invite, check your CUCM configuration for Recording:
    here is a link to guide you.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/cmfsgd601/fsmr.html#wp1047595

  • Is Quality management module required to be used for vendor evaluation?

    Hi,
    There is vendor evaluation functionality in MM. Is use of quality management module is mandatory for this? I wish to track the performance of vendor regarding quality (How much he has supplied, out of which how many are accepted and how many are rejected). Can I get this report without using QM?
    Thanks in advance,
    Satish

    you can enter Quality results manually in vendor evealuation, so QM is not necessary for this, however with QM you can get the scores semi-automatic and  automatically.

  • Function module for Mass uploadnotifications in Quality Management

    Hi  Experts,
    I need function module for quality management which MASS UPLOAD THE QM NOTIFICATIONS.
    Thanks

    Hi,
    For updation use BAPI_QUALNOT_ADD_DATA.
    Hope it helps.
    Regards
    Hiren K.Chitalia

  • SAP TechEd 2011- Data Integration and Quality Managment Sessions

    Looking for answers on "Data Integration and Quality Management," check out the related educational sessions at SAP TechEd 2011 ([Las Vegas|http://bit.ly/qE0dZs], [Bangalore|http://bit.ly/oVdGsM], [Madrid|http://bit.ly/rnSNOT]). [Register today|http://www.sdn.sap.com/irj/scn/sapteched]!

    Hi,
    you must check in sap teched site and register it, the link as below
    [SAP Teched Banglore 2011|http://www2.sapevents.com/SAP/TechEd2011Bangalore/index.cfm?fuseaction=agenda.sessionCatalogueHOS&view=overview]
    Thanks,
    Jansi

  • Control Key for Quality Management in Procurement

    if we activate Control Key for Quality Management in Procurement in material master then wether we need  also store a control key at the plant level for quality management in procurement.
    if we want want to maintaine
    pls tell me how it is
    pls expalin
    faisal

    if we activate Control Key for Quality Management in Procurement in material master then wether we need also store a control key at the plant level for quality management in procurement.
    I am not clear about your question. But I guess you want to know about control key function. You activate "proc. asctive" box in QM view of material master, that is always at plant level. When you activate this, system automatically asks for a control key & cert type, thats mandatory field.

Maybe you are looking for