Add-On Removal/Downgrade - PI_BASIS in CRM 5.0 system

Hello,
Following is an issue I am trying get brainstormed:
1. There was an error in the system
2. Proposed solution was to upgrade PI_BASIS component from 2005_1_700 patch level 9 to 2006_1_700 patch level 9
3. PI_BASIS was upgraded upto 2006_1_700 patch level 8
4. Patch level 9 would trigger many other activities of fullfilling pre-reqs and upgrading other components, so PI_BASIS wasn't brought upto Patch level 9
5. Now, the proposed solution changed to apply a correction transport attached with a Note instead because Patch Level 9 wasn't possible.
6. Now, having upgraded PI_BASIS to 2006 version with Patch Level 8 already added many additional activities in a Live environment and they have to be avoided
7. Solution being downgrade PI_BASIS from 2006 version to original 2005 version
8. In order to carry out the above change, either delete 2006 version from the system and install 2005 version OR perform a downgrade directly from 2006_1_700 patch level 8 to 2005_1_700 patch level 9
The Questions:
1. Is #8 above possible at all?
2. Does anyone know how to perform either of the 'Remove an Add-On' and/or 'Downgrade an Add-On'?
Any help is highly appreciated.
Thanks for your time and support.
Regards,
Shival

1. Is above possible at all?
Simple answer, No.
2. Does anyone know how to perform either of the 'Remove an Add-On' and/or 'Downgrade an Add-On'?
As far as I know is not possible... you'll have to restore from backup.
Regards
Juan

Similar Messages

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? Help!

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? I try to add songs from my music into my phone section and it will not go... Plus the playlists on my phone are not updated on my iTunes phone on my computer. Its like it never updated. What am I doing wrong??

Iphone will sync with one computer at a time.
When you sync to another it will delete the current content.
Make sure you have copied everything from your old computer to your new one first.

Cannot uninstall I tunes. In control panel add and remove programs it will not give me the option to remove any of the I tunes. In program files it tells me access denied to remove any of the related items. I have tried using the removal methods from i tu

My i tunes will not work at all. I have tried all the steps given to remove my I tunes player but in my control panel, add and remove programs it does not give me an option to remove any of the apple/ I tunes. I tried to go to program files and remove all the files but access is denied. This all started about 1 1/2 years ago and with every i tunes update i got more and more errors or problems until it stopped working. At one time i could remove and reinstall i tunes to try to fix it but now i cannot do anything. I believe one of the last was i could not open i tune because it was being used or was on another network, not 100% sure its been so long and frustrating I quit trying 6 months ago. Hopefully someones got some help !!!
Thanks I appreciate your time; Philip

See Troubleshooting issues with iTunes for Windows updates.
tt2

Report ID94 specific software registered with Add or Remove Programs = requested software not listed

Hi All,
Our company uses SCCM 2007 and we don't really have an SCCM officer here. I kind of try to get things done by googling a lot but for this i can't find a a solution so i open a thread.
I'm a newbie to SCCM 2007 so I don't know if i'm about to ask a dumb question but here I go.
I'm trying to pull out a report for the count of computers that run a desktop version of our Ticketing Tool.
I found the perfect standard report for this in SCCM 2007 which is: Count of instances of specific software registered with Add or Remove Programs.
in there i have to set two values: 1) the software that i'm willing to count, 2) the collection in which to search.
for value number 2 I have no problems.
my problem is in value number 1. When I click the value button to list all known software, he lists all software in a alphabetic way. problem is that it stops at letter "I"... the software i'm looking for starts with an O so it's not listed.
also if I type the software and then click Values... it replies that it couldn't find the software.
am I doing something wrong?

it sound like you are using the filter option with in the old and "crappy" ASP reports. first you should stop using then and only use the SSRS reports. secondly the filter option will only show the first 1000 rows, there is a reg key to
allow it to show more.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How do you add and remove links to websites in folders on Safari?

How do you add and remove links to websites in folders on Safari?

For clarification, works like a bookmark of website only it is listed in toolbar with "Most Visited", "Latest Headlines", "News", and "Popular". I have done it before but can't find it for the life of me.
Thanks!

How do I add and remove text in a text field with a checkbox?

How do I add and/or remove text in a text field with a checkbox?
this is my script in the text box......
event.value="Hello, this is my narrative. \r\n\nFamily: \r\n\n" + this get.Field("FirstName").value + " " + this.getField("LastName").value + was born on"=this.getField("DOB.value + "\r\n\n + this.getField("drpField").value + "\r\n\n" + this getField("Father").value
The text box looks like this...
Hello, this is my narrative.
FAMILY:
John Smith was born on 08/02/2000
Boby Lou
Jack Smith
I need to add/or remove the father field (Jack Smith) & r/n/n with a check box.
Does anyone know how to do this?

There are multiple errors in your code...
Use this code instead (adjust the name of the check-box):
var msg = "Hello, this is my narrative. \r\n\nFamily: \r\n\n" + this get.Field("FirstName").value + " " + this.getField("LastName").value + was born on" + this.getField("DOB.value) + "\r\n\n" + this.getField("drpField").value;
if (this.getField("FatherCheckBox").value!="Off")
msg += "\r\n\n" + this getField("Father").value;
event.value = msg;

Need to Add and Remove Columns of ADF Read Only table from Backing bean

I have a scenario where I am trying to Populate TransientVO which is shown has a ADF Read Only Table in page.
I have couple of Check Boxes Based on their selection I am trying to render and hide certain Columns.
But the Issue which I am facing is only the Column Header seems to change where as the Rows and Values doesnt..
even If I apply the expression language rendering condition on the outputText inside those columns.. ..
So I am thinking to add and remove VO Attribute columns to the table from backing bean.
Need some sample code snippet or a better design to achieve this. Its kind of urgent too...having an aggressive deadline :(
Please chip in People..
Thanks in Advance .
TK

Table Code..
<af:table value="#{bindings.InventoryGridTrans.collectionModel}"
                                var="row"
                                rows="#{bindings.InventoryGridTrans.rangeSize}"
                                emptyText="#{bindings.InventoryGridTrans.viewable ? 'No data to display.' : 'Access Denied.'}"
                                fetchSize="#{bindings.InventoryGridTrans.rangeSize}"
                                rowBandingInterval="0" id="t4"
                                partialTriggers="::sbcSales ::sbcUsage ::cb1">
                        <af:column sortProperty="Period" sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Period.label}"
                                   id="c38">
                          <af:outputText value="#{row.Period}" id="ot33"/>
                        </af:column>
                        <af:column sortProperty="Past12SalesCount"
                                   sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Past12SalesCount.label}"
                                   id="c29"
                                   rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
                          <af:outputText value="#{row.Past12SalesCount}"
                                         id="ot40"
                                         rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}"
                                         visible="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.InventoryGridTrans.hints.Past12SalesCount.format}"/>
                          </af:outputText>
                        </af:column>
                        <af:column sortProperty="Past12UsageCount"
                                   sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Past12UsageCount.label}"
                                   id="c40"
                                   rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
                                   visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
                          <af:outputText value="#{row.Past12UsageCount}"
                                         id="ot47"
                                         rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
                                         visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.InventoryGridTrans.hints.Past12UsageCount.format}"/>
                          </af:outputText>
                        </af:column>
                        </af:column>
                </af:table>

How to adde New Language field value in CRM Business Partner Language Field

Dear all,
How can we add a new field value to the Business Partner Language field in CRM and ECC systems.
Your suggestions will be highly appreciated
Thanks
Sravanthi

Hi Shravanthi,
You would need to add the new language to table T002. Once this is done, it will appear in the drop down menus.
Regards,
Rishu.

My iTunes won't let me add or remove my music or playlists from my iPhone?

I recently got an iPhone and have downloaded my music from one computer and stuff, but now I have a laptop I can use for my iTunes. I've authorized my apple ID with the computer, but it's still not letting me add or remove things to/from my iPhone. I've looked everywhere and tried everything for a solution but I just can't figure it out. I don't want to lose all the music and stuff that's already on my phone because it would be even more of a hassle to have to re-add all of that. I've tried using the original computer it was synced with instead but i don't have anything i want to transfer on that particular computer. Even so, the music and stuff will say it's transferring but never really does. Can anyone help me? It's rather annoying that no one on the internet seems to have any kind of helpful solution.

Hi skipper8290,
Thanks for using Apple Support Communities. It sounds like you're syncing with a new computer and would benefit from moving your content from the previous computer to your current one. This article has information on how to accomplish that:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Keep in mind since this is a new computer for the device, it will need to do a complete sync the first time, removing previously synced content.
Cheers,
- Ari

How do I remove Bing from my toolbar at the top of the page. I have already tried both of the suggestions given in the help section; I could not find Bing in my control panel "add and remove programs," and there was one other suggestion which I also tried

''locking due the age of this thread - asked and answered''
I have tried all of the suggestions given by FF in order to remove Bing from my computer but nothing seems to work. I would appreciate some advise. For instance when I go to add and remove programs I can't even find Bing listed. Looking forward to your suggestions. Thanks.
== This happened ==
Every time Firefox opened
== I first installed Firefox

Right click "Tools". Uncheck "Search Toolbars".

Want to add and remove GL account in report through report painter

Hi,
Thanks in advance,
1.I want to add new GL account in IS01 report i.e. Income Statement. I am trying to add through report painter but could not able to do it.
2.Also i want to delete existing GL account from report through report painter.
Any body pls suggest the steps to add and remove GL account through report painter because this report is under report painter.
Thanks,
KMR

the account is probably in account group or set. Look for that one in report painter and then go to the set or account group and remove/add the account.

How do I do to add and remove Shape3D objects dynamically from TransfGroup?

Hi, everyone,
How do I do to add and remove Shape3D objects dynamically from TransformGroup?
I have added two Shape3D objects in the TransformGroup and I wanted to remove one of it to add another. But, the following exception occurs when I try to use �removeChild� :
�Exception in thread "AWT-EventQueue-0" javax.media.j3d.RestrictedAccessException: Group: only a BranchGroup node may be removed at javax.media.j3d.Group.removeChild(Group.java:345)�.
Why can I add Shape3D objects and I can�t remove them? Do I need to add Shape3D object in the BranchGroup and work only with the BranchGroup? If I do, I think this isn�t a good solution for the scene graph, because for each Shape3D object I will always have to use an associated BranchGroup.
Below, following the code:
// The constructor �
Shape3D shapeA = new Shape3D(geometry, appearance);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
Shape3D shapeB = new Shape3D(geometry, appearance);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
BranchGroup bg = new BranchGroup();
bg.setCapability(ALLOW_CHILDREN_READ);
bg.setCapability(ALLOW_CHILDREN_WRITE);
bg.setCapability(ALLOW_CHILDREN_EXTEND);
TransformGroup tg = new TransformGroup();
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_WRITE);
bg.addChild(tg);
tg.addChild(shapeA);
tg.addChild(shapeB);
// The method that removes the shapeB and adds a new shapeC �
Shape3D shapeC = new Shape3D(geometry, appearance);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
tg.removeChild(shapeB);
tg.addChild(shapeC);Thanks a lot.
aads

�Exception in thread "AWT-EventQueue-0"
javax.media.j3d.RestrictedAccessException: Group:
only a BranchGroup node may be removed I would think that this would give you your answer -
Put a branch group between the transform and the shape. Then it can be removed.
Another thing you could try: This doesn't actually remove the shape, but at least causes it to hide. If you set the capabilities, I think you can write the appearance of the shapes. So, when you want to remove one of them, write an invisible appearance to it.

How to remove Java Applications from "Add and Remove Programs" list?

I have deployed my Java applications (both JWS and Applet) via JNLP with allow-offline option enabled and without installer-desc option specified.
My questions are:
1. An entry is added to the Add and Remove Programs list after launching the application via JNLP. Is it due to the specification of JNLP or JWS? Is there anyway to prevent this behavior?
2. I removed my application by clearing the cache via Java Control Panel but the entry for the application is still listed in Add and Remove Programs. How can I remove the entry in the Add and Remove Programs?
I have tried following methods but neither works:
1.Go to Add and Remove Programs, and click [remove] button to the right of my application.
*Warning message like 'Application cannot be uninstalled completely' is thrown.
2.Follow instructions listed @ [Microsoft Online Support site|http://support.microsoft.com/kb/314481/en-us] to remove my application manually via Windows registry.
*Couldn't find appropriate registry entry to delete.
Thanks in advance!

Hi, guys!
This issue has been officially approved as a new bug (Bug Id: 6946221) for the JDK 1.6_20(might include any release below) release.
It will take a couple of days for it to be shown up in the external Bug database. However, once it becomes available for viewing on external Bug database.I would like to encourage your valuable participation to vote on this bug to get it fixed ASAP by the SUN developer teams.
Java Bug Database @
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221]
Voting for the bug @
[http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221]
Thank you for your cooperation!
Edited by: Jay-K on Apr 23, 2010 12:14 AM

Add and remove modules in Apache

Is it possible to add and remove modules within Apache (actually compile an relink Apache) with a source download form Apache.org (1.3.28?) and incorporate the necessery modules and configuration from Oracle?. I have looked for some kind of documentation for this, but ended up with nothing. Can anybody explain this?.

If you really understand apache and how oracle implements the apache server then yes you could add/remove modules if you have the source code from oracle. I dont think that you can download apache1.3.28 from apache.org and expect to use that source to build an executable that can plug into oracle.

Add and Remove rows

Hi,
I have 2 tables, and I needed to add/remove some rows from the first table to the second.
I've followed the tutorial: Link: [Add and Remove from a List|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/927d8c3c-0a01-0010-57b4-e89f505e2bff] and it works great!
But the user can add two or more times the same row, so I need to avoid that. The user should be able to add every row only once!!
I thought about some condition on button Add (for example, disable the ADD button if the same row is present in both tables, but it didnt work).
Any ideas to achieve that?
Thanks in advance!
Best Regards
Marcelo.

Hi again Ahmed
I've solved my problem, but now I'm facing a new issue about the same topic.
Following your tips, I've found a solution, but now, I need to copy a complete field of a table to the data store.
For example, my table has 4 field (country, key, name and city), and I need to copy ALL the key values to the data store. So, if I have 4 rows in the table, let's say "key1", "key2", "key3", "key4"
I've reached a solution, but it involves to walk throught the entire table, selecting every row automatically (I use a spinner) and "copying" every key field of every row to the data store. When I say "copying" I mean adding it to the same virtual field of the data store, that is to say, concatenating the key values one after another.
The problem arises when the table has more than 100 records, because 100 is the top value that a spinner can reach.
Any ideas about can bypass that limit?
Thanks in advance, your help is really appreciated.
Best regards
Marcelo

Add-On Removal/Downgrade - PI_BASIS in CRM 5.0 system

Similar Messages

Maybe you are looking for